Answer:
It came from the soft drink being frozen.
Explanation:
When a drink gets frozen it expands and it causes the can to split open
Formulate your hypothesis for the problem. Design an experiment to test your hypothesis.
making up an answer:
I hypothesize that water will evaporate quicker under an incubator than on the counter.
The experiment; Equal amounts of water in the same type of containers, one under an incubator, and one on a counter with even temperature.
How many grams of sodium azide are required to produce 31.0 g of nitrogen?
Answer:
1 Gram of sodium azide produces 2.25 grams of nitrogen, so you would need about 13.7777777778 grams of sodium azide to produce 31 grams of nitrogen
Explanation:
help me pleaseeeeeeee
Answer:
Solid and lipid element
Fill in the blanks. 1. A(n). is a way of showing the chemical formulas and symbols of the substances that react and form in a chemical reaction. 2. The "before" and "after" parts of a chemical reaction are separated by a(n) in the chemical equation. 3. In any chemical reaction, the total not change, no matter what new products form. of the substances does
1-chemical equation.
2-an arrow.
3-only the atoms present in the reactants can end up in the products.
What is a basic chemical equation?The initial compound(s)—the reactants—and the final compound(s)—the products—are separated by an arrow in a chemical equation. The overall charge and the number of atoms in each element are equal on both sides of a balanced chemical equation.
What constitutes balancing a chemical equation in four steps?Step 1: Set Up a Table. Subscripts and coefficients are both present in chemical equations.
Step 2: Determining and Balancing the First Element. Pick an element that appears in one molecule on the left side and in one molecule on the left.
Step 3: Balancing Hydrogen.
Step 4: Balancing Oxygen..
To know more about Chemical equation visit:
https://brainly.com/question/28294176
#SPJ9
Sequence
5. How is a mechanical
wave produced?
A wave is produced
when something
Each
produces a wave.
Waves keep
moving even
after the
stops.
A disruption or vibration in matter, whether solid, gas, liquid, or plasma, is what generates mechanical waves.
How does a mechanical wave work?Mechanical waves are caused by a disruption or vibration in matter, whether it is solid, gas, liquid, or plasma.Mechanical waves are waves that travel through a solid, liquid, or gas at a rate determined by the elastic and inertial properties of the medium. Mechanical waves, which are the two most common wave motions, can move in either longitudinal or transverse directions. The transmission of energy through a medium is caused by an oscillation of matter known as a mechanical wave. The transmission medium limits the distance a wave can travel. There is almost no translational motion in this case, and the oscillating material rotates around a fixed point.To learn more about : mechanical wave
Ref : https://brainly.com/question/26116832
#SPJ9
10. Calculate the wavelength of the light that an electron in a Hydrogen atom would emit if it moved from n=2 to n=1
The wavelength of the light is obtained as 122nm.
What is the wavelength?From the Bohr model of the atom, we know that an electron could absorb energy and move from a lower to a higher energy level. When this electron returns to its ground state, energy is emitted in the form of a photon of visible light.
Given that;
1/λ = RH (1/n1^2 - 1/n2^2)
λ = wavelength of the light
n1 = final level
n2 = initial level
1/λ = 1.097 * 10^7(1/1^2 - 1/2^2)
1/λ = 1.097 * 10^7(1 - 0.25)
λ = 1.22 * 10^-7 m or 122nm
Learn more about Bohr model:https://brainly.com/question/3964366
#SPJ1
Suppose that Trial I in this lab was run using 0.10 M NaOH, producing a linear kinetics graph with best-fit equation y = -0.00275 x + 0.222. If Trial Il was run using 0.20 M NaOH, what would the slope of the same graph be if the reaction were (a) zero order, (b) first order, or (c) second order?
For different order Kinetics the lineer graph is different plots.
For Zero order reaction, the integrated rabe law is
[A] = [A]₀-Kt K =rate constant
[A] vs t graph is straight line with slope = -k
For first order reaction, the integrated rate law is
In [A] = In [A]o - Kt
In [A] vs t graph is straight line with slope = -K
For second order reaction, the integrated rate law is
1/[A]= 1/ [A]o + Kt
1/[A] vs t graph is straight line with slope = +k
So, for all cases the slope of straight line is either +k or -K.
k'is rate constant only depends on temperature not on concentration of reactant.
So the slope will not change for Trial II with 0.2m Naoh.
To know more about Zero order reaction visit :
https://brainly.com/question/1769080
#SPJ9
Two movers are attempting to push a couch up a ramp. One mover applies a force of 80 N to the right, but the force of friction
between the couch and the ramp is providing a force of 110 N in the opposite direction, and the couch slides down the ramp.
At minimum, how much force will the second mover need to apply to help push the couch-up the ramp?
(1 point)
O 30 N
O 110 N
0 31 N
O 80 N
Answer:
31 N
Explanation:
When Sally burns 1.0g of coal she makes 0.2g of ash. Explain her findings.
Answer:
after burning the coal,0.8of coal was lost to produce Ash and it remained little amount of coal
Use the oxidation number method to balance the following equations: a) Al(s) + H2SO4 (aq) Al2(SO4)3 (aq) + H2 (g)
By using oxidation number method , the balance chemical equation is given by :
2Al + 3H₂SO₄ ------> Al₂(SO₄)₃ + 3H₂
the give equation is :
Al + H₂SO₄ ------> Al₂(SO₄)₃ + H₂
1) write the oxidation number of each atom
reactant product
Al 0 +2
H +1 0
S +6 +6
0 -2 -2
2) Identify the atom which is oxidized and reduced and balance the for these.
Al is oxidized, from 0 to +3 and hydrogen is reduced from +1 to 0.now to balance Al and H, multiply 2 on the right side
2Al + H₂SO₄ ------> Al₂(SO₄)₃ + H₂
3) calculate the total increase in oxidation number in oxidation and same for reduction.
2Al⁰ to 2Al⁺³ ( so total increase is +6)
2H⁺¹ to 2H⁰ ( decrease in -2 )
4) now, make total increase in oxidation number = total decrease in oxidation number .for this multiply 3 to hydrogen both side to get decrease of -6.
2Al + 3H₂SO₄ ------> Al₂(SO₄)₃ + 3H₂
There fore, the balance chemical equation by oxidation number method is given as :
2Al + 3H₂SO₄ ------> Al₂(SO₄)₃ + 3H₂
To learn more about oxidation number method here
https://brainly.com/question/27929526
#SPJ1
What does the first law of thermodynamics say?
According to the first law of thermodynamics, the total energy of a system, including its surrounds, is conserved if heat is acknowledged as a kind of energy.
The study of thermodynamics looks at the connections between heat, work, temperature, and energy. The movement of energy from one place or form to another is the main focus of thermodynamics. The underlying concept is that heat is a form of energy that may be compared to a certain amount of mechanical work.
The heat was not formally recognized as a form of energy until around 1798, when British military engineer Count Rumford (Sir Benjamin Thompson) discovered that endless amounts of heat could be produced while boring cannon barrels and that the amount of heat produced is proportional to the work done while turning a blunt boring tool. Rumford's finding of the relationship between heat produced and work completed served as the theoretical cornerstone for thermodynamics.
To learn more about Thermodynamics please visit-
https://brainly.com/question/1368306
#SPJ9
Unless otherwise informed report each
numerical answer in standard notation to 3
significant figures. point Pick the choice that
is the most reasonable metric measurement
for the mass of a bullet
a)420 mL
b) 420 ng
c)420 Gg
d)420 g
e)420 cg
which of the following explains why scientists assume that the law of universal gravitation is true on all of the planets in the Solar System
Scientists assume that the law of universal gravitation is true on all of the planets in the Solar System because The planets are always moving perpendicular to the Sun's gravitational attraction, which causes them to follow an elliptical route around it.
According to Newton's universal law of gravitation Every particle in the universe is said to attract every other particle with a force along a line that connects them.The force is inversely proportional to the square of the distance between them and directly proportional to the sum of their masses.F = G(m₁ × m₂ /r²)Where, F is gravitational force between two bodies.
m₁ and m₂ are masses of the bodies.
r is the separation between the two bodies' centres.
G is universal gravitational constant = 6.673 x 10⁻¹¹Nm²/kg².
Big or little, the Law is applicable to all objects having masses. If the distance between two massive objects is very large to their sizes or if they are spherically symmetric, they can be thought of as point-like masses.Thus law of universal gravitation is true on all planets.
Learn more about Newton's universal law here:
https://brainly.com/question/9373839
#SPJ9
Can can someone help me 49-58 I give Brainly
What is the formula for Mg & O ionic bonds
Answer:
Oxygen gains two electrons to have an octet. The ionic bond between ions results from the electrostatic attraction of opposite charges. The final formula of magnesium oxide is MgO.
Explanation:
Express the number in
standard notation or
standard form.
1.25 x 10²
Standard Form
Answer:
125
Explanation:
the positive 2 on the exponent means you have to move the decimal point 2 times to the right, giving you 125.
you can also simplify the expression to 1.25 * 100 and get 125
4) A pure metal and an interstitial alloy containing the same metal were examined. Predict which
substance will have a greater density and justify your selection.
The interstitial alloy would be more dense than the pure metal.
What is density?Density is the ratio of the mass to the volume of an object. Now we know that the more dense the object is the more the atoms of the object are packed together.
An alloy is a combination of two or more metals. This implies that in an alloy we are certainly going to have more elements packed into a smaller space than in a pure metal. The pure metal contains only one type of atoms but the alloy contains more than one type of metal atoms packed into a small space.
Thus, the interstitial alloy would be more dense than the pure metal.
Learn more about alloys:https://brainly.com/question/3718729
#SPJ1
Question Which type of object creates the most friction? Responses hard objects hard objects rough objects rough objects smooth objects smooth objects soft objects
The type of object that creates the most friction is a rough object.
What is frictional force?This is the force that opposes the motion of an object. It usually exist between two surfaces that are in contact.
Factors affecting frictional force include the following;
The frictional force between two bodies depends mainly on the following factors:
(I) forces acting on the objects
(ii) type of the surface in contact
(iii) position or inclination of the surfaces
How to reduce frictional force between two surfaces;
Frictional force can be reduced with lubricantsFrictional force can be reduced using bearings in moving parts,Frictional force can reduced using inclined surfacesThus, the type of object that creates the most friction is a rough object.
Learn more about frictional force here: https://brainly.com/question/4618599
#SPJ1
6. Explain the movement of thermal energy when cans of warm soda are covered with ice.
Also explain what happens to the temperature of the soda cans and what happens to the ice.
The temperature of the can reduces and it turns into ice and the thermal energy is exchanged between the walls.
Any residual gas molecules will also cool in the cold water, which reduces their kinetic energy and lessens the number of times they collide with the can's walls. As a result, the pressure inside the can is reduced. The can collapses because the air pressure outside is greater than the air pressure inside.The cold water will also chill any gas molecules that are still there, lowering their kinetic energy and reducing the number of times they will collide with the can's walls. The pressure inside the can is reduced as a result. The can collapses because of the difference in air pressure between the outside and inside of the can.To learn more about air pressure visit:
https://brainly.com/question/15189000
#SPJ1
What is a control group used for?
To know more about control group visit :
https://brainly.com/question/14308149
#SPJ9
What is the name of the person who sings or chants a solo line in the style of call and response?
A. Call Leader
B. Melody Singer
C. Solo Singer
D. Song Leader
Would barefoot footprints be considered trace or physical evidence?????
Answer:
I would say Physical Evidence.
Explanation:
I am not so sure, so you can look up trace evidence versus physical evidence, and decide what barefoot footprints would fall into.
1.60mL of ethanol in microliters
Answer:
1600 microliters
Explanation:
µl =mL ÷ 0.0010000 so 1.60÷0.00010000=1600
Common brass is a copper and zinc alloy
containing 37.0% zinc by mass and having a
density of 8.48 g/cm³. A fitting composed of
common brass has a total volume of 121.5 cm³
Common brass is a copper and zinc alloy.
it contains 37.0% zinc by mass and having a
density of 8.48 g/cm³. A fitting composed of
common brass has a total volume of 121.5 cm³
as per avove staement , we have got
mass of copper = 63%
density = 8.48 g/cm³
volume =121.5 cm³
now,
Mass of Fitting = Vol * Density = 8.48 * 121.5= 1030 gm.
Mass of copper = 63% of 958.24 = 603.7 gm.
Moles of copper = mass/Mol. wt. = 603.7/63.5 ; [Mol wt. of copper = 63.5]
= 9.507 moles.
Therefore, Atoms of Copper = Moles * NA = 9.507*6.022*10^23
= 5.725*10^24 atoms.
To know more about Moles visit :
https://brainly.com/question/26416088
#SPJ9
Which of the following statements is TRUE about graphic scores?
A. Graphic scores can only be written on manuscript paper
B. The performer can interpret the score however he/she wishes
C. Graphic scores cannot show dynamic changes
D. The composer is not allowed to make suggestions regarding the performance
Answer: I think its B
Explanation:
please lmk if I'm wrong.
Match each type of rock with the way it is formed.
pressure and heat
cooling magma
erosion and deposition
cooling lava
intrusive igneous rock
arrowRight
extrusive igneous rock
arrowRight
sedimentary rock
arrowRight
metamorphic rock
The correct match is as follows:
Pressure and heat - Metamorphic rock
Cooling magma - The Intrusive igneous rock
Cooling lava - The Extrusive igneous rock
Erosion and Deposition - Sedimentary rock
This is because Metamorphic rocks are formed as a result of past existing rocks changing form. If the igneous and sedimentary rocks are exposed to high temperature and pressure, they then become metamorphic rocks.
Intrusive igneous rocks form when magma cools slowly. This process soon results in the formation of large-crystal like structures. Whereas, when exposed to the atmosphere lava cools rather quickly. This faster cooling process forms extrusive igneous rocks. The fast cooling lava creates smaller crystals and a smoother surface.
The sediments that are formed as a result of weathered rocks are usually deposited on the surface of Earth, or at the bottom of rivers and oceans. Over time, sediments collect and form layers over the most recent layer. This leads to the formation of sedimentary rocks.
To learn more about minerals and rocks click below,
https://brainly.com/question/15844293
#SPJ9
Answer:
I believe this is your answer, or wait I know this is your answer
Explanation:
How many significant figures does the answer of 2.5 + 9.520 contain?
The general rule of sig figs is that if there's a number with less sig figs than another, you should use the amount of sig figs in that number.
For example, if you have the numbers 1 and 7.86 and add them together, 1 only has one sig fig and 7.86 has three. Therefore, you'd add 8.86 and then round up so you have one sig fig as your answer (9).
So now, applying what we know:
[tex]2.5+9.520\\= 12.020\\=12[/tex]
You can see that we rounded down to 12 because there need to be only two sig figs here. If we wrote our answer as 12.0, this would be three sig figs since the 0 after the decimal counts.
Final answer: 2 sig figs
I hope this helps!
Find volume, mass and density of object?
Given 30.30 grams and 30.32 grams
The volume of object is 0.99 L
Here, the given mass of the object is 30.30g
Given density of the object is 30.32g/L
Density = Mass / volume
⇒ volume = mass/density
=30.30g / 30.32g/L
=0.99 L
Density is the measures how tightly a material is packed together.
learn more about density here-
https://brainly.com/question/24650225
#SPJ9
C5H12 + O2 CO2 + H2O If the molar mass of pentane is 72 g/mol, how many kilograms of carbon dioxide will be created when 9.28 kilograms of pentane combust?
The mass of the CO2 28.4 Kg.
What is combustion?The term combustion refers to burning. When a material is combusted, the material is made to burn in oxygen. This in itself is an oxidation reaction. It is common that we have to burn the alkanes and some other kinds of hydrocarbons for the process of obtaining energy.
In this case, we can see that the substance that we have to burn is pentane. The reaction equation is written in the manner; C5H12+8O2→6H2O+5CO2.
Number of moles of pentane = 9.28 * 10^3 g/ 72 g/mol
= 128.9 moles
Now;
If 1 mole of pentane produces 5 mols of CO2
128.9 moles of pentane would produce 128.9 moles * 5 mols/ 1 mole
= 644.5 moles of CO2
Mass of CO2 produced = 644.5 moles of CO2 * 44 g/mol = 28.4 Kg
Hence, we have about 28.4 Kg of CO2 produced
Learn more about combustion:https://brainly.com/question/15117038
#SPJ1
How many electrons can fill all the p orbits from n = 1 through n = 3?
A.3
B.18
C.12
D.6
the correct option is c = 12 electrons.
There are fours quantum numbers
1) Principal Quantum Number (n)
The 'n' represent the shellit also tells the size of an orbitals.2) Azimuthal Quantum Number (L)
The 'L' represent the subshells.L = n-1 , It means the shell divides into the smaller groups called orbitals.l 0 1 2 3 4 5 Orbitals s p d f g h3) Magnetic Quantum Number (ml)
ml = -l, 0, +lIt tells the orientations of orbitals.This number divides the subshell into the orbitals which holds the electrons = 2l+1.using the above information ,
4) If n= 1
L = N-1
L = 1-1 =0
'0' represent the S orbital.
each orbital can hold hold only two electrons.
The number of orbital is = 1S
4) If n= 2
L = n-1
L = 2-1
L = 1
m = -L , 0 , +L
M = +1 , 0 , -1
The number of orbitals is = 1s , 2s and 2p (Only two orbitals.)
each orbital can have only two electrons , S orbital contains two electrons and 2p (2px, 2py,2pz)= 6 electrons.
5) If n=3
L= n-1
L = 3-1= 2
L = 0,1,2
number of orbitals = S, P,D
m = -2,-,1,0,1,2
The number of orbitals are = 1S ,2S,2p, 3p ,4d
3p contains the electrons = 6 electrons.
So the number of electrons contains in p orbital from n=1 to n= 3 is 0+6+6= 12 electrons.
learn more about Quantum numbers here
https://brainly.com/question/2292596
#SPJ9