The area bounded by the line 2x - y = 12 and the parabola y = x² - 5x is 1/6 squares unit.
What is parabola?
A parabola is an approximately U-shaped, mirror-symmetrical plane curve in mathematics. It corresponds to a number of seemingly unrelated mathematical descriptions, all of which can be shown to define the same curves. A parabola can be described using a point and a line.
As given,
The region is bounded by the line 2x - y = 12 and the parabola y = x² - 5x.
Equate values:
2x - y = 12
y = 2x - 12
Substitute value of y in equation y = x² - 5x respectively,
2x - 12 = x² - 5x
x² - 7x + 12 = 0
x² - 4x - 3x + 12 = 0
x(x- 4) - 3(x - 4) = 0
(x - 4) (x - 3) = 0
Since, x =3, 4 so, 3 ≤ x ≤ 4.
Evaluate the area bounded by line and parabola:
Area = ∫ from (3 to 4) (2x - 12 - x² + 5x) dx
Solve integral,
Area = ∫ from (3 to 4) (7x - x² - 12) dx
Area = from (3 to 4) {(7x²/2) - (x³/3) - (12x)}
Simplify values,
Area = {(7(4)²/2) - (4³/3) - (12(4)) - (7(3)²/2) - (3³/3) - (12(3))}
Area = {(112/2) - (64/3) - (48) - (63/2) - (27/3) - (36)}
Area = 49/2 - 37/3 - 12
Area = 1/6.
Hence, the area bounded by the line 2x - y = 12 and the parabola y = x² - 5x is 1/6 squares unit.
To learn more about parabola from the given link.
https://brainly.com/question/64712
#SPJ4
Consider the function f(x)=x 4
−4x 3
. (a) Find the x - and y-intercepts of the graph of f (if any). (b) Find the intervals on which f is increasing or decreasing and the local extreme va (c) Find the intervals of concavity and inflection points of f. (d) Sketch the graph of f.
Two x-intercepts: x = 0 and x = 4 the y-intercept is (0, 0). The local minimum is at (0, 0) and the local maximum is at (3, -27). f(x) is concave up on (0, 2) and concave down on (-∞, 0) and (2, ∞). The inflection point occurs at (2, -16)
The function f(x) = x^4 - 4x^3 can be analyzed to determine its key features.
(a) The x-intercepts can be found by setting f(x) = 0 and solving for x. In this case, we have x^4 - 4x^3 = 0. Factoring out x^3 gives x^3(x - 4) = 0, which yields two x-intercepts: x = 0 and x = 4. To find the y-intercept, we evaluate f(0) = 0^4 - 4(0)^3 = 0. Hence, the y-intercept is (0, 0).
(b) To determine the intervals of increase or decrease, we analyze the first derivative of f(x). Taking the derivative of f(x) with respect to x yields f'(x) = 4x^3 - 12x^2. Setting f'(x) = 0 and sol1ving for x gives x = 0 and x = 3. These critical points divide the x-axis into three intervals: (-∞, 0), (0, 3), and (3, ∞). By testing values within each interval, we find that f(x) is increasing on (-∞, 0) and (3, ∞), and decreasing on (0, 3). The local extreme values occur at the critical points, so the local minimum is at (0, 0) and the local maximum is at (3, -27).
(c) To determine the intervals of concavity and inflection points, we analyze the second derivative of f(x).
Taking the derivative of f'(x) yields f''(x) = 12x^2 - 24x. Setting f''(x) = 0 gives x = 0 and x = 2, dividing the x-axis into three intervals: (-∞, 0), (0, 2), and (2, ∞).
By testing values within each interval, we find that f(x) is concave up on (0, 2) and concave down on (-∞, 0) and (2, ∞). The inflection point occurs at (2, -16).
(d) Combining all the information, we can sketch the graph of f, showing the x- and y-intercepts, local extreme values, and inflection point, as well as the behavior of the function in different intervals of increase, decrease, and concavity.
Learn more about inflection point of a function :
https://brainly.com/question/30763521
#SPJ11
Blunt County needs $1,160,000 from property tax to meet its budget. The total value of assessed property in Blunt is $133,000,000. What is the tax rate of Blunt? (Round UP your tax rate to the next higher ten thousandth. Round your final answer (mils) to 1 decimal place.)
Answer: Rounding up to the next higher ten thousandth, the tax rate for Blunt County is approximately 8.8 mils.
Step-by-step explanation: To find the tax rate of Blunt County, we can divide the amount needed from property tax by the total assessed value of property and then convert the result to mils. Here's the calculation:
Tax Rate = (Amount Needed from Property Tax / Total Assessed Value of Property) * 1000
Tax Rate = ($1,160,000 / $133,000,000) * 1000
Tax Rate = 0.008721804511278195 * 1000
Tax Rate = 8.721804511278195 mils
Therefore, the tax rate of Blunt County is 8.7 mils (rounded to 1 decimal place).
To calculate the tax rate of Blunt County, we can divide the amount of money needed from property tax ($1,160,000) by the total value of assessed property in Blunt County ($133,000,000) and convert it to mils (thousandths of a dollar).
Tax Rate = (Amount of Money Needed from Property Tax / Total Value of Assessed Property) * 1,000
Tax Rate = ($1,160,000 / $133,000,000) * 1,000
Tax Rate = 0.0087 * 1,000
Tax Rate = 8.7 mils
To know more about tax rate,
https://brainly.com/question/17102384
#SPJ11
(1 point) Evaluate the integrals. dt = 1. [-36 +677 + (3) * - - 3 [ 3 17 + 6 17 a) dt = S1) 14 (3 sec t tan 1)i + (6 tan t)j + (9 sint cost)
∫ [14(3sec(t)tan(t))i + (6tan(t))j + (9sintcost)] dt = 21(sec^2(t)) + 3(tan^2(t)) - (9/4)cos(2t) + C, where C is the constant of integration.
To evaluate the given integral, let's break it down into its individual components and compute each part separately.
Given:
∫ [14(3sec(t)tan(t))i + (6tan(t))j + (9sintcost)] dt
To integrate the first component, which is 14(3sec(t)tan(t))i, we'll use the substitution method. Let's substitute u = sec(t), du = sec(t)tan(t) dt.
∫ [14(3sec(t)tan(t))i] dt = ∫ [14(3u) du]
= 42∫ u du
= 42 * (u^2/2) + C
= 21u^2 + C
= 21(sec^2(t)) + C
Next, we integrate the second component, (6tan(t))j, by using the substitution method. Let's substitute v = tan(t), dv = sec^2(t) dt.
∫ [(6tan(t))j] dt = ∫ [(6v) dv]
= 6∫ v dv
= 6 * (v^2/2) + C
= 3v^2 + C
= 3(tan^2(t)) + C
Lastly, we integrate the third component, (9sintcost).
∫ [(9sintcost)] dt = 9∫ [sintcost] dt
To integrate sintcost, we'll use the product-to-sum identities:
sintcost = (1/2)[sin(2t)].
∫ [(9sintcost)] dt = 9 * (1/2) ∫ [sin(2t)] dt
= (9/2) * (-1/2) * cos(2t) + C
= -(9/4)cos(2t) + C
Now, combining all the components, we have:
∫ [14(3sec(t)tan(t))i + (6tan(t))j + (9sintcost)] dt = 21(sec^2(t)) + 3(tan^2(t)) - (9/4)cos(2t) + C, where C is the constant of integration.
To know more about integrals, visit the link : https://brainly.com/question/30094386
#SPJ11
for each of the number line write an absolute value equation that has the following solution set. 5 and 19
Therefore, the absolute value equations that have the solution set of 5 and 19 on the number line are:
| x | = 5
| x | = 19
To write an absolute value equation that has the solution set of 5 and 19 on a number line, we can use the fact that the distance between any number and 0 on the number line is its absolute value.
Let's consider the number 5. The distance between 5 and 0 is 5 units. So, an absolute value equation that has 5 as a solution is:
| x - 0 | = 5
Simplifying this equation, we get:
| x | = 5
Now, let's consider the number 19. The distance between 19 and 0 is 19 units. So, an absolute value equation that has 19 as a solution is:
| x - 0 | = 19
Simplifying this equation, we get:
| x | = 19
To know more about absolute value equations,
https://brainly.com/question/32163457
#SPJ11
solve the multiple-angle equation. cos 2x = , 5. 2 sinx - sin x - 1 = 0 (a) x =
To solve the multiple-angle equation cos(2x) = 5, we can use the double-angle formula for cosine, which states: cos(2x) = 2cos^2(x) - 1.
Substituting this into the equation, we have: 2cos^2(x) - 1 = 5. Rearranging the equation, we get: 2cos^2(x) = 6. Dividing both sides by 2, we have: cos^2(x) = 3. Taking the square root of both sides, we get:
cos(x) = ±√3.
To find the solutions for x, we need to consider the values of cos(x) that satisfy cos(x) = √3 and cos(x) = -√3. For cos(x) = √3, we have: x = arccos(√3). For cos(x) = -√3, we have: x = arccos(-√3). These are the solutions to the equation cos(2x) = 5.
To Learn more about multiple-angle equation click here : brainly.com/question/16960117
#SPJ11
Let y = 9. Round your answers to four decimals if necessary. (a) Find the change in y, Ay when I = 3 and Ar=0.3 Ay= (b) Find the differential dy when = 3 and dx = 0.3 dy Question Help: D Post to forum
We can find Ay by substituting the given values into the equation. Both the change in y (Ay) and the differential dy are zero when I = 3 and Ar = 0.3, as the equation y = 9 represents a constant value that does not vary with changes in other variables.
Given that y = 9, the value of y is constant and does not change with variations in I or Ar. Therefore, the change in y (Ay) will be zero, regardless of the values of I and Ar. To find the differential dy, we need to take the derivative of y with respect to x. However, since the equation y = 9 does not involve x, the derivative of y with respect to x will be zero. Therefore, the differential dy will also be zero. In summary, the change in y (Ay) is zero when I = 3 and Ar = 0.3, and the differential dy is zero when dx = 0.3. This is because the equation y = 9 represents a horizontal line with a constant value, so it does not change with variations in x or any other variables.
Learn more about differential here:
https://brainly.com/question/31391186
#SPJ11
SD Company produces expensive bedspreads and pillows. The production process for each is similar in that both require a certain number of Prep work (P) and a
certain number of labor hours in Finishing and Packaging (FP).
Each bedspread requires 0.5 hours of P and 0.75 hours of FP departments.
Each pillow requires 0.3 hours of P and 0.2 hour in FP During the current production period, 200 hours of P and 100 hours of FP are
available.
Each pillow sold yields a profit of $10; each bedspread sold yield a $25 of profit. SD wants to find calculate whether this combinations of pillows and bedspreads
will result in the profit of $2,500.
a) Yes, the solution is feasible
b) No, the solution is not feasible
The solution is feasible, and (a) yes, the solution is feasible.
to determine whether the combination of pillows and bedspreads will result in a profit of $2,500, we need to check if the solution is feasible given the available hours of prep work (p) and finishing and packaging (fp).
let's calculate the maximum number of bedspreads and pillows that can be produced with the available hours:
for bedspreads:- each bedspread requires 0.5 hours of p and 0.75 hours of fp.
- with 200 hours of p available, the maximum number of bedspreads that can be produced is 200 / 0.5 = 400.- with 100 hours of fp available, the maximum number of bedspreads that can be produced is 100 / 0.75 = 133.33 (rounded down to 133 to avoid fractional units).
for pillows:
- each pillow requires 0.3 hours of p and 0.2 hours of fp.- with 200 hours of p available, the maximum number of pillows that can be produced is 200 / 0.3 = 666.67 (rounded down to 666).
- with 100 hours of fp available, the maximum number of pillows that can be produced is 100 / 0.2 = 500.
now, let's calculate the total profit from the produced bedspreads and pillows:
profit from bedspreads = 400 * $25 = $10,000profit from pillows = 666 * $10 = $6,660
the total profit is $10,000 + $6,660 = $16,660, which is higher than the desired profit of $2,500.
Learn more about combination here:
https://brainly.com/question/31586670
#SPJ11
applications of vectors
Question 1 (4 points) Calculate the dot product of the following: å= 3j+ k, b= 21-j+2E a
Calculation:Here, å = 3j + k, b = 21-j+2e, a is not given.So, we cannot calculate the dot product between these vectors as a is missing.
The given terms are "vectors", "Calculate", and "å= 3j+ k". Dot product of vectors:The dot product of two vectors is also known as the scalar product of vectors. It's a binary operation that accepts two vectors as inputs and generates a scalar number as output. It is mathematically expressed as:A.B = AB cosθWhere A and B are vectors, AB is the magnitude of vectors, and θ is the angle between them.Calculation:Here, å = 3j + k, b = 21-j+2e, a is not given.So, we cannot calculate the dot product between these vectors as a is missing.Thus, the given question cannot be answered with the given data.
learn more about vectors here;
https://brainly.com/question/12674335?
#SPJ11
3. Find the first and second partial derivatives of the function g(x, y)=cos(x² + y²)-sin(xy).
First partial derivatives:
∂g/∂x = -2x sin(x² + y²) - y cos(xy)
∂g/∂y = -2y sin(x² + y²) - x cos(xy)
Second partial derivatives:
∂²g/∂x² = -2 sin(x² + y²) - 4x² cos(x² + y²) + y² sin(xy)
∂²g/∂y² = -2 sin(x² + y²) - 4y² cos(x² + y²) + x² sin(xy)
∂²g/∂x∂y = -2xy cos(x² + y²) - x sin(xy) - x sin(x² + y²)
∂²g/∂y∂x = ∂²g/∂x∂y (by the symmetry of mixed partial derivatives)
To find the first partial derivatives, we differentiate the function g(x, y) with respect to each variable, x and y, while treating the other variable as a constant. The derivative of cos(x² + y²) with respect to x is -2x sin(x² + y²) due to the chain rule. Similarly, the derivative of sin(xy) with respect to x is -y cos(xy). The partial derivative with respect to y can be found in a similar manner.
To find the second partial derivatives, we differentiate the first partial derivatives with respect to x and y again. For example, to find ∂²g/∂x², we differentiate ∂g/∂x with respect to x. We apply the chain rule and product rule to obtain the expression -2 sin(x² + y²) - 4x² cos(x² + y²) + y² sin(xy). The other second partial derivatives are computed similarly.
The second partial derivatives provide information about the curvature and rate of change of the function in different directions.
LEARN MORE ABOUT derivative here: brainly.com/question/29020856
#SPJ11
FIFTY POINT QUESTION PLEASE HELP
Approximate the slant height of a cone with a volume of approximately 28.2 ft and a height of 2 ft. Use 3.14 for π and round to the nearest tenth
We can use the formula for the volume of a cone to solve for the radius of the cone, and then use the Pythagorean theorem to find the slant height.
The formula for the volume of a cone is:
V = (1/3)πr^2h
Substituting the given values, we get:
28.2 = (1/3)(3.14)r^2(2)
Simplifying and solving for r, we get:
r^2 = (28.2 / 3.14) / (2/3.14) = 4.5
r ≈ 2.12 (rounded to two decimal places)
Now, we can use the Pythagorean theorem to find the slant height (l):
l^2 = r^2 + h^2
l^2 = 2.12^2 + 2^2
l^2 ≈ 8.5
l ≈ 2.92 (rounded to two decimal places)
Therefore, the approximate slant height of the cone is 2.92 feet.
NEED HELP PLS
Which system is represented in the graph?
y < x2 – 6x – 7
y > x – 3
y < x2 – 6x – 7
y ≤ x – 3
y ≥ x2 – 6x – 7
y ≤ x – 3
y > x2 – 6x – 7
y ≤ x – 3
The required system that is represented in the graph is
y < [tex]x^{2}[/tex] – 6x – 7 and y ≤ x – 3.
To find the system that represented in the graph by considering the point in the shaded region, check with all the linear inequality.
Consider point P1(9, 4) in the shaded region. Check whether P1 satisfies which system of equation.
1. y < [tex]x^{2}[/tex] – 6x – 7 and y > x – 3
Substitute the x = 9 and y = 4 and check it.
y < [tex]x^{2}[/tex] – 6x – 7
4 < [tex]9^{2}[/tex] – 6 × 9 – 7.
4 < 81 - 54 - 7.
4 < 20.
y > x – 3
4 > 9 – 3
4 not > 5
This system does not satisfy the graph.
2. y < [tex]x^{2}[/tex] – 6x – 7 and y ≤ x – 3
Substitute the x = 9 and y = 4 and check it.
y < [tex]x^{2}[/tex] – 6x – 7
4 < [tex]9^{2}[/tex] – 6 × 9 – 7.
4 < 81 - 54 - 7.
4 < 20.
y ≤ x – 3
4 ≤ 9 – 3
4 ≤ 5
This system satisfy the graph.
3. y ≥ [tex]x^{2}[/tex] – 6x – 7 and y ≤ x – 3
Substitute the x = 9 and y = 4 and check it.
y ≥ [tex]x^{2}[/tex] – 6x – 7
4 ≥ [tex]9^{2}[/tex] – 6 × 9 – 7.
4 ≥ 81 - 54 - 7.
4 not ≥ 20.
y ≤ x – 3
4 ≤ 9 – 3
4 ≤ 5
This system does not satisfy the graph.
4. y > [tex]x^{2}[/tex] – 6x – 7 and y ≤ x – 3
Substitute the x = 9 and y = 4 and check it.
y > [tex]x^{2}[/tex] – 6x – 7
4 > [tex]9^{2}[/tex] – 6 × 9 – 7.
4 > 81 - 54 - 7.
4 not > 20.
y ≤ x – 3
4 ≤ 9 – 3
4 ≤ 5
This system does not satisfy the graph.
Hence, the required system that is represented in the graph is
y < [tex]x^{2}[/tex] – 6x – 7 and y ≤ x – 3.
Learn more about graph click here:
https://brainly.com/question/32429136
#SPJ1
please help the image is below
Math 112 - Spring 2018 2 2. (12 points) Two hot air balloons are rising and falling. The altitude (in feet) of the Red Balloon after t minutes is given by R(t) = -20t² +240t + 600. The rate of ascent (in feet per minute) of the Green Balloon after t minutes is given by g(t) = −6t² + 18t + 240. (d) How high is the Red Balloon when the Green Balloon is rising most rapidly?
Red Balloon is at an altitude of 915 feet when Green Balloon is rising most rapidly. To determine how high Red Balloon is when the Green Balloon is rising most rapidly, we need to find the point in time where the derivative of Green Balloon's altitude function, g(t), is at its maximum.
Red Balloon's altitude function: R(t) = -20t² + 240t + 600 Green Balloon's rate of ascent function: g(t) = -6t² + 18t + 240 To find the point in time where the Green Balloon is rising most rapidly, we need to find the maximum of the derivative of g(t) with respect to t.
First, let's find the derivative of g(t) with respect to t: g'(t) = d/dt [-6t² + 18t + 240] = -12t + 18 To find the point where g'(t) is at its maximum, we set g'(t) = 0 and solve for t: -12t + 18 = 0 -12t = -18 t = -18 / -12 t = 1.5 So, when t = 1.5 minutes, the Green Balloon is rising most rapidly.
Next, we can find the altitude of the Red Balloon at t = 1.5 minutes by substituting t = 1.5 into the Red Balloon's altitude function, R(t): R(1.5) = -20(1.5)² + 240(1.5) + 600 = -20(2.25) + 360 + 600 = -45 + 360 + 600 = 915 feet
Therefore, the Red Balloon is at an altitude of 915 feet when the Green Balloon is rising most rapidly.
Know more about function here:
https://brainly.com/question/30721594
#SPJ11
Question 3 of 3
Mariano is standing at the top of a hill when he kicks a soccer ball up into the air. The height of the hill is h
feet, and the ball is kicked with an initial velocity of v feet per second. The height of the ball above the bottom
of the hill after t seconds is given by the polynomial -1612 + vt + h. Find the height of the ball after 3 seconds
if it was kicked from the top of a 65 foot tall hill at 80 feet per second.
The required height of the ball after 3 seconds when it was kicked from the top of a 65 - foot tall hill at 80 feet per second is -937 feet.
Given that h(t) = -1612+ vt +h and v = 80 feet per second, h = 65 feet and 3 seconds.
To find the height of the ball after 3 seconds substitute the value of v, h, and t into the given polynomial.
Consider the given equation gives,
Height of the ball after t seconds h(t) = -1612+ vt +h
substitute the value of v, h, and t into the above equation,
Height of the ball after 3 seconds h(3) = -1612 + (80 x 3) +65.
Height of the ball after 3 seconds h(3) = -1612 +240+65
Height of the ball after 3 seconds h(3) = -937.
Hence, the required height of the ball after 3 seconds when it was kicked from the top of a 65 - foot tall hill at 80 feet per second is -937 feet.
Learn more about Polynomial click here:
https://brainly.com/question/31902568
#SPJ1
bem bpight a box pf ;aundry detergent that contains 195 scoops. each load pf laundry use 1/2 2 scoops. how many loads of laundry can ben do with one box of laundry detergent
Therefore, Ben can do 390 loads of laundry with one box of laundry detergent.
Ben bought a box of laundry detergent that contains 195 scoops. Each load of laundry uses 1/2 scoop.
To determine how many loads of laundry Ben can do with one box of detergent, we divide the total number of scoops by the scoops used per load:
Number of loads = Total scoops / Scoops per load
Number of loads = 195 scoops / (1/2 scoop per load)
Number of loads = 195 scoops * (2/1) = 390 loads
To know more about loads of laundry,
https://brainly.com/question/11320115
#SPJ11
part of maria’s craft project involved inscribing cylinder unto a cone as shown. The height of the cone is 15cm and radius is 5 cm. Find the dimensions of the cylinder and its capacity such that it has a maximum surface area (2pir^2+2pirh)
In Maria's craft project, to maximize the surface area of the inscribed cylinder on a cone with a height of 15 cm and a radius of 5 cm, the dimensions of the cylinder should match those of the cone's top portion. The cylinder should have a height of 15 cm and a radius of 5 cm, resulting in a maximum surface area.
To find the dimensions of the cylinder that maximize the surface area, we consider the fact that the cylinder is inscribed inside the cone. The top portion of the cone is essentially the base of the cylinder. Since the cone's height is 15 cm and the radius is 5 cm, the cylinder should also have a height of 15 cm and a radius of 5 cm. By matching the dimensions, the cylinder will have the same slant height as the cone's top portion, ensuring a maximum surface area.
The formula for the surface area of the cylinder is 2πr^2 + 2πrh, where r is the radius and h is the height. By substituting the values of r = 5 cm and h = 15 cm, we get: 2π(5^2) + 2π(5)(15) = 200π + 150π = 350π cm^2. Thus, the maximum surface area of the inscribed cylinder is 350π square centimeters.
Learn more about surface area here:
https://brainly.com/question/29298005
#SPJ11
Find the area of the trapezoid.
Find the volume of an oblique cone with a height of 6 in. and a slant height of 10 in.
(Height is a right angle at the base.)
(A). 1206.4 in³
(B). 402.1 in³
(C). 301.6 in³
(D). 100.5 in³
The Volume of the oblique cone is approximately 402.12 cubic inches.
The volume of an oblique cone, we can use the formula:
V = (1/3) * π * r^2 * h,
where V is the volume, π is a mathematical constant approximately equal to 3.14159, r is the radius of the base, and h is the height of the cone.
In this case, the height of the cone is given as 6 inches. However, the slant height is provided, and we need to find the radius in order to calculate the volume.
Using the given information, we can apply the Pythagorean theorem to find the radius:
r^2 = slant height^2 - height^2,
r^2 = 10^2 - 6^2,
r^2 = 100 - 36,
r^2 = 64,
r = √64,
r = 8.
Now that we have the radius, we can calculate the volume:
V = (1/3) * π * (8)^2 * 6,
V = (1/3) * π * 64 * 6,
V = (1/3) * π * 384,
V = (384/3) * π,
V = 128 * π.
To find the decimal equivalent of the volume, we can multiply 128 by the value of π:
V ≈ 128 * 3.14159,
V ≈ 402.12.
Therefore, the volume of the oblique cone is approximately 402.12 cubic inches.
Among the given answer choices, the closest option is (B) 402.1 in³.
To know more about Volume .
https://brainly.com/question/30610113
#SPJ8
Homework 5: Problem 5 Previous Problem Problem List Next Problem (1 point) From the textbook: Assume the half-life of a substance is 20 days and the initial amount is 158.999999999997 grams. (a) Fill in the right hand side of the following equation which expresses the amount A of the substance as a function of time (the coefficient of t in the exponent should have at least five decimal places): A = (b) When will the substance be reduced to 2.9 grams? At t = ⠀⠀⠀ days.
The substance will be reduced to 2.9 grams after approximately 43.4914833636 days.
The equation expressing the amount A of the substance as a function of time, given a half-life of 20 days and an initial amount of 158.999999999997 grams, is A = 158.999999999997 * (1/2)^(t/20).
The equation for the amount of a substance undergoing exponential decay over time is given by A = A₀ * (1/2)^(t/t₁/₂), where A₀ is the initial amount, t is the time, and t₁/₂ is the half-life.
In this case, the initial amount is 158.999999999997 grams, and the half-life is 20 days.
By substituting these values into the equation, we get A = 158.999999999997 * (1/2)^(t/20).
This equation represents the amount of the substance as a function of time.
To find when the substance will be reduced to 2.9 grams, we set A equal to 2.9 grams in the equation and solve for t:
2.9 = 158.999999999997 * (1/2)^(t/20)
Dividing both sides of the equation by 158.999999999997, we have:
2.9 / 158.999999999997 = (1/2)^(t/20)
Taking the logarithm base 1/2 of both sides, we can solve for t:
log(2.9 / 158.999999999997) / log(1/2) = t / 2
t ≈ 43.4914833636
Therefore, the substance will be reduced to 2.9 grams after approximately 43.4914833636 days.
Learn more about exponential decay over time:
https://brainly.com/question/28849325
#SPJ11
9 please i will rate
(5 points) Find the arclength of the curve r(t) = (-3 sint, -2t, 3 cost). _6
the arclength of the curve r(t) = (-3 sint, -2t, 3 cost) from t = 0 to t = 6 is 6√13.
The given equation for the curve is: r(t) = (-3 sint, -2t, 3 cost)
The arclength of the curve is given by:
[tex]$$\int_{a}^{b}\sqrt{\left(\frac{dx}{dt}\right)^2+\left(\frac{dy}{dt}\right)^2+\left(\frac{dz}{dt}\right)^2}dt$$[/tex]
where a and b are the limits of integration.
We can differentiate r(t) to get:
[tex]$$\frac{dr}{dt} = (-3 cost, -2, -3 sint)$$$$\left|\frac{dr}{dt}\right| = \sqrt{9 \cos^2t + 4 + 9 \sin^2t} = \sqrt{13}$$[/tex]
The limits of integration are from 0 to 6.
Thus, the arclength of the curve is given by:
[tex]$$\int_{0}^{6}\sqrt{13}dt = \sqrt{13}\int_{0}^{6}dt = \sqrt{13} \cdot [t]_0^6 = \sqrt{13} \cdot 6 = 6 \sqrt{13}$$[/tex]
To learn more about arclength click here https://brainly.com/question/24251184
#SPJ11
Compute the inverse Laplace transform: LP -s-4 52-5-2 e -2} (Notation: write uſt-e) for the Heaviside step function uc(t) with step at t = c.)
For the Heaviside step function uc(t) with step at t = c is L-1[LP(s)] = -3! [u(t-5-c)] * [e 2(t-c)].
The inverse Laplace transform of LP(s) = -s-4 / (s-5)2 e -2}
(Notation: write uſt-e) for the Heaviside step function uc(t) with step at t = c can be computed as shown below:
Firstly, consider LP(s) = -s-4 / (s-5)2 e -2. Let P(s) = (s-5)2.
Then, LP(s) = -s-4 / P(s) e -2
Taking Laplace transform of both sides, we haveL[LP(s)] = L[-s-4 / P(s) e -2]L[LP(s)] = -L[s-4 / P(s)] e -2
Using the differentiation property of the Laplace transform and the fact that
L[uc(t-c)] = e -cs L[uc(t)], we have
L[LP(s)] = -L[t3 e 5t] e -2L[LP(s)] = -3! L[(s-5)-4] e -2L[LP(s)] = -3! u(t-5) e -2
Differentiating both sides, we get
L-1[LP(s)] = L-1[-3! u(t-5) e -2]L-1[LP(s)] = -3! L-1[u(t-5)] * L-1[e -2]L-1[LP(s)] = -3! [u(t-5-c)] * [e 2(t-c)]
Therefore, the inverse Laplace transform of LP(s) = -s-4 / (s-5)2 e -2}
(Notation: write uſt-e) for the Heaviside step function uc(t) with step at t = c is L-1[LP(s)] = -3! [u(t-5-c)] * [e 2(t-c)]
Learn more about Laplace transform :
https://brainly.com/question/30759963
#SPJ11
Let R be the region in the first quadrant bounded above by the parabola y = 4-x²and below by the line y = 1. Then the area of R is: 2√3 units squared 6 units squared O This option √√3 units squ
The region R is in the first quadrant and bounded above by the parabola y = 4 - [tex]x^{2}[/tex] and below by the line y = 1. We need to determine the area of R among the given options.
We can find the intersection points of the two curves by setting them equal to each other:
4 - [tex]x^{2}[/tex] = 1
Simplifying the equation, we have:
[tex]x^{2}[/tex] = 3
Taking the square root of both sides, we get:
x = ±[tex]\sqrt{3}[/tex]
Since we are considering the region in the first quadrant, we take the positive value: x = [tex]\sqrt{3}[/tex].
To calculate the area, we integrate the difference between the upper and lower curves with respect to x:
Area = ∫[0, [tex]\sqrt{3}[/tex]] (4 - [tex]x^{2}[/tex] - 1) dx
Simplifying, we have:
Area = ∫[0, [tex]\sqrt{3}[/tex]] (3 - [tex]x^{2}[/tex]) dx
Evaluating the integral, we find:
Area = [3x - ([tex]x^{3}[/tex]/3)] [0, [tex]\sqrt{3}[/tex]]
Area = (3[tex]\sqrt{3}[/tex] - ([tex]\sqrt{3} ^{3}[/tex]/3)) - (0 - ([tex]0^{3}[/tex]/3))
Area = 3[tex]\sqrt{3}[/tex] - ([tex]\sqrt{3} ^{3}[/tex]/3)
Among the given options, the area of R is correctly represented by "[tex]\sqrt{3}[/tex] units squared."
Learn more about quadrant here:
brainly.com/question/30979352
#SPJ11
Researchers can use the mark-and-recapture method along with the proportion
below to estimate the gray wolf population in Minnesota.
Number of wolves marked in first capture/
Number of wolves in population
Number of recaptured wolves from first capture/
Number of wolves in second capture a. Researchers later capture 120 gray wolves. Of these wolves, 5 were marked from the first capture. Estimate the total number of gray wolves in
Minnesota. b. Can you use the estimate of the number of gray wolves in Minnesota to estimate that total number of gray wolves in the entire Midwest? in the
country? Explain.
a. Total number of gray wolves in Minnesota is calculated by mark-and-recapture method which (5 * 120) / Number of recaptured wolves from first capture.
To estimate the total number of gray wolves in Minnesota using the mark-and-recapture method, we use the proportion:
(Number of wolves marked in first capture / Number of wolves in population) = (Number of recaptured wolves from first capture / Number of wolves in second capture)
Given that 5 wolves were marked in the first capture and 120 wolves were captured in the second capture, we can set up the equation:
(5 / Number of wolves in population) = (Number of recaptured wolves from first capture / 120)
To solve for the number of wolves in the population, we can cross-multiply and solve the equation:
Number of wolves in population = (5 * 120) / Number of recaptured wolves from first capture.
b. The estimate of the number of gray wolves in Minnesota cannot be directly used to estimate the total number of gray wolves in the entire Midwest or the country. This is because the mark-and-recapture method estimates the population size within the area where the marking and recapturing occurred. The assumptions of this method, such as closed population and random recapturing, may not hold true when extending the estimate to larger geographical areas.
To estimate the gray wolf population in the entire Midwest or the country, separate mark-and-recapture studies would need to be conducted in those specific regions. Each region would have its own population estimate based on its own marking and recapturing data. These estimates could then be combined or extrapolated using appropriate statistical methods to obtain an estimate for the larger area. However, it should be noted that estimating the population of an entire region or country accurately is a complex task, and multiple data sources and methodologies would typically be employed to improve accuracy.
LEARN MORE ABOUT mark and recapture method here: brainly.com/question/31863022
#SPJ11
For the plate occupying the square 0 $ r < 1,0 or = in each blank. You don't need to do the computation - just use your intuition. (a) 81(2. y) = 1: cy (b) 89(, y) = 2 – 1 – y: Gr 7 Com (C) 83(1. y) = (1 - 1)?y?: I EN
The correct choices for the blanks are:
(a) 0 or = (b) < or = (c) < or =
What are the correct symbols to fill in the blanks?In the given options, the correct symbols to fill in the blanks are as follows:
(a) The inequality 81(2. y) = 1 corresponds to 0 or =, meaning that the expression is true when y is either 0 or equal to 1.
(b) The inequality 89(, y) = 2 – 1 – y corresponds to < or =, indicating that the expression is true when y is less than or equal to 2 minus 1 minus y.
(c) The inequality 83(1. y) = (1 - 1)?y? corresponds to < or =, indicating that the expression is true when y is less than or equal to the result of (1 - 1) multiplied by y.
Learn more about corresponds.
brainly.com/question/12454508
#SPJ11
The measured width of the office is 30mm. If the scale of 1:800 is used, calculate the actual width of the building in metres
Answer:
To calculate the actual width of the building in meters, given the measured width of 30mm and a scale of 1:800, we can use the concept of proportions.
Since 1 unit on the scale represents 800 units in reality, we can set up the following proportion:
1 unit on the scale / 800 units in reality = 30mm / x meters
To solve for x (the actual width of the building in meters), we can cross-multiply and solve for x:
1 * x = 800 * 30mm
x = (800 * 30mm) / 1
Now, let's convert the width from millimeters to meters:
x = (800 * 30) / 1000
x = 24 meters
Therefore, the actual width of the building is 24 meters.
Step-by-step explanation:
Compute the directional derivatives of the following functions along unit vectors at the indicated points in directions parallel to the given vector.
a) f(x, y) = xy, (x0, y0) = (e, e), d = 5i + 12j
b) f(x, y, z) = ex + yz, (x0, y0, z0) = (1, 1, 1), d = (4, −3, 3)
c) f(x, y, z) = xyz, (x0, y0, z0) = (1, 0, 1), d = (1, 0, −1)
a) The directional derivative of f(x, y) = xy along the unit vector d = 5i + 12j at the point (x0, y0) = (e, e) is 17e.
b) The directional derivative of f(x, y, z) = ex + yz along the unit vector d = (4, −3, 3) at the point (x0, y0, z0) = (1, 1, 1) is 1.
c) The directional derivative of f(x, y, z) = xyz along the unit vector d = (1, 0, −1) at the point (x0, y0, z0) = (1, 0, 1) is 0.
The directional derivative measures the rate at which a function changes along a specified direction. It is computed by taking the dot product of the gradient of the function with the unit vector representing the direction.
For part (a), the gradient of f(x, y) = xy is (∂f/∂x, ∂f/∂y) = (y, x), and at the point (e, e), it becomes (e, e). Taking the dot product of this gradient with the unit vector (5, 12) gives 5e + 12e = 17e.
For part (b), the gradient of f(x, y, z) = ex + yz is (∂f/∂x, ∂f/∂y, ∂f/∂z) = (e, z, y), and at the point (1, 1, 1), it becomes (e, 1, 1). Taking the dot product of this gradient with the unit vector (4, -3, 3) gives 4e - 3 + 3 = 1.
For part (c), the gradient of f(x, y, z) = xyz is (∂f/∂x, ∂f/∂y, ∂f/∂z) = (yz, xz, xy), and at the point (1, 0, 1), it becomes (0, 0, 0). Taking the dot product of this gradient with the unit vector (1, 0, -1) gives 0.
learn more about directional derivative here:
https://brainly.com/question/17019148
#SPJ11
5. Which of the following rational numbers does not lie between (2/5 and 3/4
From the given options, the rational number that does not lie between 2/5 and 3/4 is option (d) 9/20.
We need to discover a number that is either smaller than 2/5 or greater than 3/4 in order to find a rational number that does not fall between these two numbers.
Let's contrast each choice with the range provided:
a. 17/20 does not fall between 2/5 and 3/4 because it is more than 3/4.
b. 13/20: This number falls inside the provided range and is not the solution we are seeking for because it is larger than 2/5 but smaller than 3/4.
c. 11/20: This number falls inside the provided range and is not the solution we are seeking for because it is larger than 2/5 but smaller than 3/4.
d. 9/20: Because this number is less than 2/5, it does not fall within the range.
From the given options, the rational number that does not lie between 2/5 and 3/4 is option (d) 9/20.
Learn more about rational number click;
https://brainly.com/question/17450097
#SPJ1
Complete question =
Choose a rational number which does not lie between 2/5 and3/4.
a.17/20
b.13/20
c.11/20
d.9/20
3. A particle starts moving from the point (2,1,0) with velocity given by v(1) = (21,21 1,2 4L), where I > 0. (a) (3 points) Find the particle's position at any time l. (b) (4 points) What is the cosi
the particle's position at any time l is given by: x(t) = (21/2)t^2 - (17/2) y(t) (7/2)t^3 - (5/2) z(t) = (1/2)t^2 - (1/2) w(t) = (1/4L)t^2 - (1/4L)
To find the particle's position at any time l, we can integrate its velocity vector with respect to time. Given that v(1) = (21, 21, 1, 2/4L), let's perform the integration.
(a) Position at any time l:
Integrating the velocity vector, we have:
∫(v(t)) dt = ∫((21t, 21t^2, t, (2/4L)t)) dt
To find the position, we integrate each component of the velocity vector separately:
∫(21t) dt = (21/2)t^2 + C1
∫(21t^2) dt = (7/2)t^3 + C2
∫(t) dt = (1/2)t^2 + C3
∫((2/4L)t) dt = (1/4L)t^2 + C4
Adding the constant terms, we get:
x(t) = (21/2)t^2 + C1
y(t) = (7/2)t^3 + C2
z(t) = (1/2)t^2 + C3
w(t) = (1/4L)t^2 + C4
Now, we need to determine the values of the constants C1, C2, C3, and C4. To do so, we'll use the initial conditions provided.
Given that the particle starts at the point (2, 1, 0) when t = 1, we substitute these values into the position equations:
x(1) = (21/2)(1)^2 + C1 = 2
y(1) = (7/2)(1)^3 + C2 = 1
z(1) = (1/2)(1)^2 + C3 = 0
w(1) = (1/4L)(1)^2 + C4 = 0
From these equations, we can solve for the constants C1, C2, C3, and C4.
C1 = 2 - (21/2) = -17/2
C2 = 1 - (7/2) = -5/2
C3 = 0 - (1/2) = -1/2
C4 = 0 - (1/4L) = -1/4L
Therefore, the particle's position at any time l is given by:
x(t) = (21/2)t^2 - (17/2)
y(t) = (7/2)t^3 - (5/2)
z(t) = (1/2)t^2 - (1/2)
w(t) = (1/4L)t^2 - (1/4L)
(b) To find the cosine of the angle between the velocity vector v(1) and the position vector at t = 1, we can calculate their dot product and divide it by the product of their magnitudes.
Let's calculate the cosine:
cosθ = (v(1) · r(1)) / (|v(1)| |r(1)|)
Substituting the values:
v(1) = (21, 21, 1, 2/4L)
r(1) = (2, 1, 0, 0)
|v(1)| = √((21)^2 + (21)^2 + (1)^2 + (2/4L)^2) = √(882 + 882 + 1 + (1/2L)^2) = √(1765 +
To know more about Velocity related question visit:
https://brainly.com/question/18084516
#SPJ11
Find the angle between the vectors u = √5i -8j and v= √5i+j-4k. The angle between the vectors is 0 radians. (Do not round until the final answer. Then round to the nearest hundredth as needed.)
To find the angle between the vectors u = √5i - 8j and v = √5i + j - 4k, we can use the dot product formula and the magnitudes of the vectors.
The dot product of two vectors u and v is given by:
u · v = |u| |v| cos(θ)
where |u| and |v| are the magnitudes of u and v, respectively, and θ is the angle between the vectors.
First, let's calculate the magnitudes of the vectors:
|u| = √(√5² + (-8)²) = √(5 + 64) = √69
|v| = √(√5² + 1² + (-4)²) = √(5 + 1 + 16) = √22
Now, let's calculate the dot product of u and v:
u · v = (√5)(√5) + (-8)(1) + 0 = 5 - 8 = -3
Substituting the magnitudes and dot product into the dot product formula, we have:
-3 = (√69)(√22) cos(θ)
To find the angle θ, we can rearrange the equation:
cos(θ) = -3 / (√69)(√22)
Using the inverse cosine function, we can find the angle:
θ = arccos(-3 / (√69)(√22))
≈ 124.30° (rounded to the nearest hundredth)
Therefore, the angle between the vectors u = √5i - 8j and v = √5i + j - 4k is approximately 124.30 degrees.
Learn more about cosine function here:
https://brainly.com/question/3876065
#SPJ11
10. (a) [10] Find a potential function for the vector field F(x, y) = (2xy + 24, x2 + 16); that is, find f(x,y) such that F = Vf. You may assume that the vector field F is conservative. (b) [5] Use pa
A potential function for the vector field F(x, y) = (2xy + 24, x^2 + 16) can be found by integrating the components of the vector field with respect to their respective variables. This potential function allows us to express the vector field as the gradient of a scalar function.
To find a potential function for the given vector field F(x, y) = (2xy + 24, x^2 + 16), we integrate the x-component with respect to x and the y-component with respect to y. First, integrating the x-component, we get:
∫(2xy + 24) dx = x^2y + 24x + g(y),
where g(y) is an arbitrary function of y.
Next, integrating the y-component, we get:
∫(x^2 + 16) dy = x^2y + 16y + h(x),
where h(x) is an arbitrary function of x.
Since the vector field F is conservative, the potential function f(x, y) is given by the sum of the two arbitrary functions, g(y) and h(x):
f(x, y) = x^2y + 24x + 16y + C,
where C is a constant of integration.
Therefore, the potential function for the given vector field is f(x, y) = x^2y + 24x + 16y + C.
To learn more about potential function click here: brainly.com/question/28156550
#SPJ11