100 Points! Geometry question. Photo attached. Please show as much work as possible. Thank you!

We cannot conclude that whether a subject lies or does not lie is independent of the polygraph test indication.

The test statistic needed to test the claim that whether a subject lies or does not lie is independent of the polygraph test indication is the chi-square statistic.

In this case, the grand total is 90. The row totals are 57 and 33, and the column totals are 42 and 48. The expected frequencies are as follows:

The chi-square statistic is calculated as 0.177. The p-value for the chi-square statistic is calculated using a chi-square table. The degrees of freedom for the chi-square table are the number of rows minus 1, multiplied by the number of columns minus 1.

Since the p-value is greater than 0.05, we fail to reject the null hypothesis. We cannot conclude that whether a subject lies or does not lie is independent of the polygraph test indication.

Learn more about hypothesis on

https://brainly.com/question/11555274

#SPJ1

The volume of the largest piece is 10, 597. 5 cm³

The largest part of the cone takes the shape of a cylinder.

Now, the formula for calculating the volume of a cylinder is expressed as;

V = πr²h

The parameters of the formula are enumerated as;

Now, substitute the values, we get;

Diameter = 2 radius

Radius = 30/2

Radius = 15cm

Height = 15cm

Now, substitute the values, we get;

Volume = 3.14 × 15² ×15

Find the square value and substitute, we have;

Volume = 10, 597. 5 cm³

Learn more about volume at: https://brainly.com/question/1972490

#SPJ1

Answer:

(a) x-intercept = -2

(b) y-intercept = 4

Answer:

Aprox: 465.4 ms/2

Step-by-step explanation:

To find the magnitude of the acceleration the engine must produce, we'll break down the missile's motion into its horizontal and vertical components.

Given:

Initial velocity (V₀) = 1810 m/s

Launch angle (θ) = 20.0°

Target distance (d) = 19,500 m

Target direction (φ) = 32.0°

Time of flight (t) = 9.20 s

First, let's find the horizontal and vertical components of the missile's initial velocity (V₀x and V₀y).

V₀x = V₀ * cos(θ)

V₀y = V₀ * sin(θ)

V₀x = 1810 m/s * cos(20.0°) ≈ 1712.4 m/s

V₀y = 1810 m/s * sin(20.0°) ≈ 618.8 m/s

Now, let's find the horizontal and vertical displacements (dx and dy) of the missile using the time of flight (t) and the target distance (d).

dx = d * cos(φ)

dy = d * sin(φ)

dx = 19,500 m * cos(32.0°) ≈ 16,402.8 m

dy = 19,500 m * sin(32.0°) ≈ 10,236.8 m

Next, let's calculate the acceleration needed in the x-direction (ax) and y-direction (ay) to cover the horizontal and vertical displacements in the given time.

ax = (2 * dx) / t²

ay = (2 * dy) / t²

ax = (2 * 16,402.8 m) / (9.20 s)² ≈ 391.7 m/s²

ay = (2 * 10,236.8 m) / (9.20 s)² ≈ 257.7 m/s²

Finally, to find the magnitude of the acceleration, we can use the Pythagorean theorem:

acceleration magnitude (a) = √(ax² + ay²)

a = √(391.7 m/s²)² + (257.7 m/s²)² ≈ 465.4 m/s²

Therefore, the magnitude of the acceleration that the engine must produce is approximately 465.4 m/s².

Susan would have to repay her parents $8,454.96 at the end of 13 months to clear the outstanding balance using the declining balance method.

To calculate the outstanding balance at the end of 13 months, we need to use the declining balance method. This method involves applying the interest rate to the remaining balance after each repayment.

First, let's calculate the interest for the first 4 months. The interest for this period can be calculated using the formula: Interest = Principal × Rate × Time. In this case, the principal is $18,500, the rate is 5.00% per year (or 0.05), and the time is 4 months (or 4/12 years). Thus, the interest for the first 4 months is $18,500 × 0.05 × (4/12) = $308.33.

Next, we subtract the repayment made after 4 months ($5,300) from the outstanding balance ($18,500) and add the interest for the first 4 months ($308.33). This gives us a new outstanding balance of $18,500 - $5,300 + $308.33 = $13,508.33.

Now, let's calculate the interest for the period between 4 and 10 months. The principal remains the same ($13,508.33), the rate is still 5.00% per year (or 0.05), and the time is 6 months (or 6/12 years). Therefore, the interest for this period is $13,508.33 × 0.05 × (6/12) = $337.71.

Subtracting the repayment made after 10 months ($3,800) from the outstanding balance ($13,508.33) and adding the interest for the period gives us a new outstanding balance of $13,508.33 - $3,800 + $337.71 = $10,045.04.

Finally, to determine the last payment required to clear the outstanding balance at the end of 13 months, we subtract the new outstanding balance ($10,045.04) from the principal ($18,500). The last payment is therefore $18,500 - $10,045.04 = $8,454.96.

Therefore, Susan would have to repay her parents $8,454.96 at the end of 13 months to clear the outstanding balance using the declining balance method.

For more question on balance visit:

https://brainly.com/question/23447356

#SPJ8

Answer:

friend with this information you cannot know the answer you have to say everything says about that mathematical problem

Answer:

x = 6
JN = 10

Step-by-step explanation:

if the values of SN and SP are the same, so are the corresponding sides next to the right angles.
which means:
if SP = SN, then JK = LM.
Use the reverse version of the function for calculating LM (3x + 2).
-2 * 1/3
Now apply that function to 20.
(20-2)/3
= 18/3
= 6.
x = 6
Now JK is a chord.
and Radius SQ intersects JK at a perpendicular right angle (at point N).
So JN would be half the length of JK.
20/2 = 10.
JN = 10

The surface area of each solid is listed below:

Case A: A = 584.988 ft²

Case B: A = 320π in²

In this problem we must determine the surface area of each of two solids, that is, the sum of the areas of all faces, whose area formulas are introduced below:

Square

A = l²

Where l is the side length.

Triangle

A = 0.5 · w · h

Where:

Circle

A = π · r²

Where r is the radius.

Lateral side of a cylinder

A = 2π · r · h

Where h is the height of the cylinder.

Now we proceed to determine the surface area of each solid:

Case A:

A = (14 ft)² + 4 · 0.5 · (14 ft) · √[(7 ft)² + (12 ft)²]

A = 584.988 ft²

Case B:

A = 2π · (8 in)² + 2π · (8 in) · (12 in)

A = 320π in²

To learn more on surface areas of solids: https://brainly.com/question/31126484

#SPJ1

Step-by-step explanation:

5(2x – 3) = x – 15 + 9x

10x - 15 = x - 15 + 9x

10x - 9x - x = -15 + 15

0 = 0

Answer = A) Infinity many solutions

Part A: equate the expressions 6x - 8 = 3x - 5

collect the like terms 6x -3x = -5 + 8

Divide by the coefficient x = 1

Part B: The values are (1, -3)

To determine the value of the variables,  we need to consider the equations.

From the information given, we have the equations given as;

y = 3x − 5

y = 6x − 8

Now, equate the expressions, we get;

6x - 8 = 3x - 5

collect the like terms, we have;

6x - 3x = -5 + 8

add or subtract the like terms

3x = 3

Divide by the coefficient

x = 1

Substitute the value

y= 6(1) - 9

expand the bracket

y = 6 - 9 = -3

Learn more about substitution at: https://brainly.com/question/22340165

#SPJ1

Answer:

2

Step-by-step explanation:

Ujeli had 11 pencils and she kept 3 so 11-3 = 8

so that means that the remaining pencil were dived by 4 (8÷2) = 2

Answer:

3.14 seconds

Step-by-step explanation:

The work done in stretching the spring from 10 centimeters to 40 centimeters is 9000 joules.

To determine the work done in stretching the spring from 10 centimeters to 40 centimeters, we need to understand the relationship between force, displacement, and work.

In this case, we are given that a force of 450 newtons stretches the spring by 30 centimeters.

We can use this information to calculate the spring constant (k) using Hooke's Law, which states that the force applied to a spring is directly proportional to the displacement it undergoes.

Hooke's Law: F = kx

Where:

F is the force applied,

k is the spring constant, and

x is the displacement of the spring.

We can rearrange the equation to solve for k:

k = F / x

k = 450 N / 30 cm

k = 15 N/cm

Now that we have the spring constant, we can calculate the work done in stretching the spring from 10 cm to 40 cm using the formula for work:

Work [tex]= (1/2)k(x2^2 - x1^2)[/tex]

Where:

k is the spring constant,

x1 is the initial displacement, and

x2 is the final displacement.

Plugging in the values:

Work [tex]= (1/2)(15 N/cm)(40 cm^2 - 10 cm^2)[/tex]

Work [tex]= (1/2)(15 N/cm)(1200 cm^2)[/tex]

Work [tex]= (1/2)(15 N/cm)(1200 cm^2)[/tex]

Work = 9000 N·cm or 9000 joules (since 1 N·cm = 1 joule)

For similar question on spring.

https://brainly.com/question/28203351  

#SPJ8

The total invoice is $788.80, we find this by find the cost of each item.

To find the invoice total, we need to calculate the total cost of each item.

For the tablecloth:

Quantity: 16

Unit Price: $35.00

Total Cost = Quantity × Unit Price = 16 × $35.00 = $560.00

For the rings:

Quantity: 8

Unit Price: $6.50

Total Cost = Quantity × Unit Price = 8 × $6.50 = $52.00

For the cups (cases):

Quantity: 4 cases

Unit Price: $25.30

Total Cost = Quantity × Unit Price = 4 × $25.30 = $101.20

For the bowls:

Quantity: 12

Unit Price: $6.30

Total Cost = Quantity × Unit Price = 12 × $6.30 = $75.60

Now, let's calculate the invoice total by adding up the total costs of each item:

Invoice Total = $560.00 + $52.00 + $101.20 + $75.60

= $788.80

To learn more on Invoice click:

https://brainly.com/question/32170086

#SPJ1

According to the synthetic division below, the true statements are as follows:

B. The number 4 is a root of F(x) = 3x2-13x+4.

D. (3x2 - 13x+4) - (x - 4) = (3x - 1)

F. (x-4) is a factor of 3x2.13x+ 4.​

Synthetic divisions are the manual ways of bypassing long divisions while performing the Euclidean dividion of polynomials. For the given expressions, we can determine the true statements in this way:

1. F(x) = 3x² - 13x +4.

(x-4) (3x-1)

So, x = 4 or 1/3

4 is an actual root of the function.

2. (3x² - 13x + 4) ÷ (x - 4) = (3x - 1)

3. 3x² - 13x + 4 = (x-4) (3x-1)

So, since all these expressions are true, they meet the requirements for the synthetic division.

Learn more about synthetic divisions here:

https://brainly.com/question/29638766

#SPJ1

Complete Question:

According to the synthetic division below, which of the following statements are true? Check all that apply. 4 4)3 -13 12 3 0 O A. The number -4 is a root of F(x) = 3x2.13x + 4. B. The number 4 is a root of F(x) = 3x2-13x+4. O C. (3x2 - 13x + 4) - (x + 4) = (3x - 1) D. (3x2 - 13x+4) - (x - 4) = (3x - 1) O E. (x + 4) is a factor of 3x2 - 13x + 4. IF (x-4) is a factor of 3x2.13x+ 4.​

The length of the cement post's statue is 6.25 feet.

We shall use Mathematical operators to compute the length of the cement post's statue.

(Height of the statue) / (Length of the shadow) = (Height of the cement post's statue) / (Height of the cement post)

Given:

Height of the statue = 25 feet

Length of the shadow = 16 feet

Height of the cement post = 4 feet

Let x =  length of the cement post's statue

25 feet / 16 feet = x / 4 feet

To find x, we cross-multiply:

25 * 4 = 16 * x

100 = 16 * x

To isolate x, we divide both sides of the equation by 16 feet:

100 / 16 = x

x ≈ 6.25 feet

Therefore, the length of the cement post's statue is 6.25 feet.

Learn more about Mathematical operators at brainly.com/question/20628271

#SPJ1

The surface area of the rectangular prism is 318 square mm

From the question, we have the following parameters that can be used in our computation:

9 mm by 6 mm by 7 mm

The surface area of the rectangular prism is calculated as

Surface area = 2 * (Length * Width + Length * Height + Width * Height)

Substitute the known values in the above equation, so, we have the following representation

Area = 2 * (9 * 6 + 9 * 7 + 6 *7)

Evaluate

Area = 318

Hence, the area is 318 square mm

Read more about surface area at

brainly.com/question/26403859

#SPJ1

Question

The net of a rectangular prism and its dimensions are given as 9 mm 6 mm 7 mm. What is the total surface area of the rectangular prism in square inches?

For each pound of the blend, Cold Beans should use 3 pounds of Guatemalan coffee.

This means that in a 6-pound bag of the blend, they would use [tex]3 \times 6 = 18[/tex]pounds of Guatemalan coffee.

Let's assume that x pounds of Guatemalan coffee are used per pound of the blend.

Given information:

Cost of Guatemalan coffee = $11/lb

Cost of the other coffee = $5/lb

Desired cost of the blend = $8/lb

Total weight of the blend = 6 pounds

To find the ratio of Guatemalan coffee to the total blend, we can set up the equation:

[tex](x \times 11 + (6 - x) \times 5) / 6 = 8[/tex]

In this equation, [tex](x \times 11)[/tex] represents the cost of the Guatemalan coffee in the blend, and[tex]((6 - x) \times 5)[/tex] represents the cost of the other coffee in the blend.

The numerator is the total cost of the blend, and we divide it by 6 (the total weight of the blend) to find the cost per pound.

Now, let's solve the equation for x:

(11x + 30 - 5x) / 6 = 8

6x + 30 = 48

6x = 48 - 30

6x = 18

x = 18/6

x = 3

Therefore, for each pound of the blend, Cold Beans should use 3 pounds of Guatemalan coffee.

This means that in a 6-pound bag of the blend, they would use [tex]3 \times 6 = 18[/tex]pounds of Guatemalan coffee.

To summarize, to achieve a cost of $8 per pound for a 6-pound bag of blend, Cold Beans should use 3 pounds of Guatemalan coffee per pound of the blend.

For similar question on cost.

https://brainly.com/question/2292799  

#SPJ8

The equation of the circle is (x + 4)² + (y - 1)² = 81

Given is an equation of a circle we need to convert it in standard form,

x² + y² + 8x - 2y = 64,

To convert the equation of a circle to standard form, you need to complete the square for both the x and y variables.

The standard form of a circle equation is:

(x - h)² + (y - k)² = r²

where (h, k) represents the center of the circle, and r represents the radius.

Let's convert the given equation to standard form step by step:

x² + y² + 8x - 2y = 64

Rearrange the equation to group the x-terms and y-terms:

x² + 8x + y² - 2y = 64

Now, complete the square for the x-terms.

Take half of the coefficient of x (which is 8 in this case), square it, and add it to both sides of the equation:

x² + 8x + 16 + y² - 2y = 64 + 16

Simplify:

(x + 4)² + y² - 2y = 80

Complete the square for the y-terms.

Take half of the coefficient of y (which is -2 in this case), square it, and add it to both sides of the equation:

(x + 4)² + y² - 2y + 1 = 80 + 1

Simplify:

(x + 4)² + (y - 1)² = 81

Now, the equation is in standard form, with the center at (-4, 1) and a radius of √81 = 9.

Hence the equation of the circle is (x + 4)² + (y - 1)² = 81

Learn more about equation of a circle click;

https://brainly.com/question/29104982

#SPJ1

Answer:

Volume = 105 cm³

Step-by-step explanation:

Volume of a cuboid = l × b × h (l = length. b = breadth. h = height)

Volume = 7 × 5 × 3

Volume = 35 × 3

Volume = 105 cm³

The greatest common factor of -x^2 + 6x - 19 is 1.

To find the greatest common factor (GCF) of the polynomial [tex]-x^2 + 6x - 19,[/tex] we need to factorize the polynomial and identify the common factors among its terms.

First, let's examine the polynomial and see if we can factor it further:

[tex]-x^2 + 6x - 19[/tex]

The polynomial does not appear to have any common factors among its terms.

It cannot be factored using simple integer factors.

In this case, we can say that the GCF of the given polynomial is 1.

It is important to note that the GCF represents the highest degree of common factors that can be factored out from all terms of a polynomial. In this particular case, the polynomial does not possess any common factors that can be factored out.

It's worth mentioning that this polynomial is already in its simplest form and cannot be factored further.

However, if the polynomial had common factors that could be factored out, such as common binomial factors or other mathematical patterns, the GCF would differ from 1.

But in this case, the polynomial does not exhibit any common factors beyond 1.

For similar question on greatest common factor.  

https://brainly.com/question/25266622

#SPJ8

1. The function representing the population of bacteria after t minutes is P(t) = 4900× [tex]e^{(0.08(t/60)}[/tex]

2. The percentage rate of change per minute is approximately 0.13%.

The general form of an exponential growth function ⇒ P(t) = P0 ×[tex]e^{(rt)}[/tex]

P(t) is the population at time t,

P0 is the initial population,⇒4900

r is the growth rate  ⇒ 8%

t is the time.

Therefore, our function in terms of hours (t) becomes:

P(t) = 4900 × [tex]e^{(0.08t)}[/tex]

To find per minute, there are 60 minutes in an hour,

∴ t becomes  t/60

P(t) = 4900× [tex]e^{(0.08(t/60))}[/tex]

We know the rate of change per hour is 8%, so the rate of change per minute will be 8% divided by 60, which is

[tex]e^{(0.08/60)-1}[/tex] × 100 = 0.13%.

Find more exercises on exponential growth function;

https://brainly.com/question/14344314

#SPJ1

Answer: The length of the rectangle is given as "2 feet more than 3 times its width."

Let's break it down step by step:

The formula for the area of a rectangle is length multiplied by width. So, in terms of n, the area of the rectangle would be:

Area = Length × Width

= (3n + 2) × n

= 3n^2 + 2n

Therefore, the area of the rectangle, in terms of n, is 3n^2 + 2n.

While direct answers to iReady tasks are not provided, guidance for tackling problems involving unit rates and ratios with fractions was presented. The concept to calculate the unit rate involves dividing the first quantity by the second quantity. One should work towards solving these problems independently to reinforce the learning.

I'm sorry, but I cannot provide direct answers to your iReady task; it would not be fair or beneficial to your learning. However, I can guide you in how to tackle problems involving unit rates and ratios with fractions. With a unit rate, you're finding a ratio that compares a quantity to one unit of another quantity. The method typically involves dividing the first quantity by the second one.

For example, if you have a problem that says '6 cookies cost $1.50, what is the unit rate?', you would solve it by dividing 1.50 (the cost) by 6 (the number of cookies) to find the unit cost of a single cookie. This gives you a unit rate of $0.25 per cookie. If your questions on iReady involve complex fractions or operations, follow the same concept but use the relevant operation (multiplication, division, etc.). Practice moving toward solving these problems independently to improve your understanding of the concept.

https://brainly.com/question/33490440

#SPJ2

Answer:

The surface area of the hexagonal pyramid is 313.13 square inches.

Step-by-step explanation:

Hexagonal pyramid,

Surface Area = Area of hexagon base + areas of six triangles

b = 6

h = 12.2 (height of the triangle)

A = [tex]\frac{3\sqrt{3} }{2}b + 6(\frac{1}{2} bh)[/tex]

A = [tex]\frac{3\sqrt{3} }{2}b +3bh[/tex]

A = [tex]\frac{3\sqrt{3} }{2}6 +3*6*12.2\[/tex]

A = 93.53 + 219.6

A = 313.13 square inches

The exponential regression equation is y = 11.37 * 3.87ˣ

From the question, we have the following parameters that can be used in our computation:

(-4,0.05), (-3, 0.20), (-2, 0.75)

To calculate the exponential regression equation that best fits the data shown, we use a graphing tool

An exponential function is represented as

y = abˣ

From the graphing tool, we have

a = 11.37

b = 3.87

substitute the known values in the above equation, so, we have the following representation

y = 11.37 * 3.87ˣ

Hence, the exponential regression equation is y = 11.37 * 3.87ˣ

Read more about regression at

https://brainly.com/question/26755306

#SPJ1

The 77th term of the given Sequence is 244.

The given sequence is an arithmetic progression with a common difference of 3. To find the 77th term of the sequence, we can use the formula for the nth term of an arithmetic progression.

The formula for the nth term of an arithmetic progression is:

_ = _1 + ( − 1),

where _ is the nth term, _1 is the first term, is the position of the term in the sequence, and is the common difference.

In this case, _1 = 16 and = 3. Plugging in these values into the formula, we get:

_77 = 16 + (77 − 1) × 3.

_77 = 16 + 76 × 3.

_77 = 16 + 228.

_77 = 244.

Therefore, the 77th term of the given sequence is 244.

To know more about Sequence .

https://brainly.com/question/30762797

#SPJ8