The theoretical yield (in kilograms) of water produced from this reaction : 0.285 kg
Further explanationReaction
2C₁₂H₂₄O₁₁ + 25O₂ → 24CO₂ + 24H₂O
mass of C₁₂H₂₄O₁₁ - isomaltitol = 454 g
mol C₁₂H₂₄O₁₁(MW=344.31 g/mol) :
[tex]\tt mol=\dfrac{mass}{MW}\\\\mol=\dfrac{454}{344.31 g/mol}\\\\mol=1.319[/tex]
mol H₂O based on C₁₂H₂₄O₁₁ as limiting reactant(O₂-oxygen as an excess)
From the equation above, mol ratio of C₁₂H₂₄O₁₁ : H₂O = 2 : 24, so mol H₂O:
[tex]\tt mol~H_2O=\dfrac{24}{2}\times 1.319=15.828[/tex]
then mass H₂O (MW=18 g/mol) :
[tex]\tt mass=mol\times MW\\\\mass=15.828\times 18=284.904~g=0.285~kg[/tex]
The enthalpy of combustion of naphthalene (MW = 128.17 g/mol) is -5139.6 kJ/mol. How much energy is produced by burning 0.8210 g of naphthalene?
The energy produced : -32.89 kJ
Further explanationDelta H reaction (ΔH) is the amount of heat / heat change between the system and its environment
(ΔH) can be positive (endothermic = requires heat) or negative (exothermic = releasing heat)
The enthalpy of combustion of naphthalene (MW = 128.17 g/mol) is -5139.6 kJ/mol.
For 0.8210 g of naphthalene :
mol =
[tex]\tt mol=\dfrac{mass}{MW}\\\\mol=\dfrac{0.8210}{128.17}=0.0064[/tex]
The energy produced :
[tex]\tt Q=\Delta H\times n(mol)\\\\Q=-5139.6\times 0.0064=-32.89~kJ[/tex]
which layer of Earth's atmosphere is also home to the biosphere it is home to all living things?
Answer:
Biosphere
Explanation:
The biosphere covers all living organisms on Earth. There is an estimated 20 million to 100 millions different species in the world organized into the 100 phyla that make up the five kingdoms of life forms. These organisms can be found in almost all parts of the geosphere.
which of the following is the best definition for volume
a. solids are the only matter with volume
b. all energy has volume
c. volume is the three-dimensional size of an object
d. gases do not have volume
Answer:
C
Explanation:
I hope that helps!!! it kinda gave you the answer though
why are scientific methods important in the study of science
a.they are useful only for teaching students about science
b.they help scientists understand complex ideas and objects that arent easy to handle
c.they enable scientists to popularize their work in society
d.they are necessary to conduct the peer review process
e.they are necessary for turning a hypothesis into a law
Answer:rrrrrrrrrrrrrrrrrrr
Explanation:
rrrrrrrrrrrrrrrrrrrrrrrr
Which statement is always true about a reversible chemical reaction?
Answer:
It is a chemical reaction in which the reactants form products and products react together to give reactants back. That means reversible reactions can go in both directions forward as well as backward direction.
List down 10 different types of minerals (metallic and non metallic) include the different uses and help in the economy of these minerals.
Answer:
names of 10 metallic minerals are Silver, Chromium, Tin, Nickel, Copper, Iron, Lead, Aluminum, Gold, and Zinc.
Explanation:
One of the benefits of nuclear power generation is a reduction in the emission of harmful waste gases into the atmosphere.
Which gas is normally emitted by nuclear power plants?
Select all that apply.
nitrogen oxides
sulfur oxides
carbon dioxide
steam
radon
water vapor
Answer:
carbon dioxide
Explanation:
Putting the Brakes on Carbon Emissions
Every year, nuclear-generated electricity saves our atmosphere from more than 506 million metric tons of carbon dioxide, equivalent to taking more than 110 million passenger cars off the road.
How many neutrons and protons are there in each of the following nuclides:(a) 10B. (b) 24Na, (c) 59Co, (d) 208Pb. and (e) 235U?
Answer:
a. 5 protons and 5 neutrons
b. 11 protons and 13 neutrons
c. 27 protons and 32 neutrons
d. 82 protons and 126 neutrons
e. 92 protons and 143 neutrons
Explanation:
Using isotope notation:
ˣN
X = Amount of neutrons and protons
N is the atom. If N is nitrogen, the atomic number is 7, that means there are 7 protons.
X - Amount of protons = Neutrons
a. ¹⁰B. Atomic number = 5 = Number of protons
10 - 5 = 5 = Number of neutrons
5 protons and 5 neutrons
b. ²⁴N. Atomic number = 11 = Number of protons
24 - 11 = 13 = Number of neutrons
11 protons and 13 neutrons
c. ⁵⁹Co. Atomic number = 27 = Number of protons
59 - 27 = 32 = Number of neutrons
27 protons and 32 neutrons
d. ²⁰⁸Pb. Atomic number = 82 = Number of protons
208 - 82 = 126 = Number of neutrons
82 protons and 126 neutrons
e. ²³⁵U. Atomic number = 92 = Number of protons
235 - 92 = 143 = Number of neutrons
92 protons and 143 neutrons
Which of the Atoms shown has an atomic number four
Answer:
B
Explanation:
Atomic # = Protons
it says 4 p in the inside of the orbital
The products of a combustion reaction include:
A: water and carbon dioxide
B: hydrogen, water, and carbon dioxide.
C: water and carbon monoxide.
D: hydrogen and water.
Answer:
A
Explanation:
Combustion reactions always produce water and CO2
The products for the combustion have been water and carbon dioxide along with the liberation of heat. Thus, option A is correct.
Combustion can be defined as the process of burning carbon-based compounds in the presence of oxygen. Combustion has been the process that liberates heat energy.
The combustion can be given as:
Hydrocarbon [tex]\rightarrow[/tex] Carbon dioxide + Water + Heat
The products for the combustion have been water and carbon dioxide along with the liberation of heat. Thus, option A is correct.
For more information about combustion, refer to the link:
https://brainly.com/question/9641392
Consider the reaction of glucose with oxygen: C6H12O6(s) + 6O2(g) Right arrow. 6CO2(g) + 6H2O(l)
The enthalpy of formation (Delta.Hf) for C6H12O6(s) is –1,273.02 kJ/mol, Delta.Hf for CO2(g) is –393.5 kJ/mol, and
Delta.Hf for H2O(l) is –285.83 kJ/mol. What is Delta.Hf for O2(g)?
Which equation should be used to calculate Delta.Hrxn for this reaction?
(-393.5kJ/mol + (-285.83 kJ/mol))-(-1,273.02 kJ/mol)
-1,273.02 kJ/mol - ((6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol))
((6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol)) - (1 mol)(-1,273.02 kJ/mol)
What is Delta.Hrxn for this reaction?
answer: first, third, -2803
We can effectively that the correct equation of the reaction is correctly written as ((6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol)) - (1 mol)(-1,273.02 kJ/mol).
What is the heat of reaction?The heat of reaction is the heat that could be absorbed or evolved in a reaction. We know that a reaction could be an exothermic or an endothermic reaction. In an exothermic reaction, energy is given out while an endothermic reaction is one in which heat is absorbed.
Having said this, we know that the reaction is a combustion reaction. Heat is always given out in a combustion reaction thus we know that the process is exothermic and the sign of the heat of reaction is negative.
Let us now look at the reaction as shown, we can see that it involves the combustion or burning of glucose in oxygen. We now seek to obtain the correct equation for the combustion reaction.
Thus, we can now write effectively that the correct equation of the reaction is correctly written as ((6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol)) - (1 mol)(-1,273.02 kJ/mol).
Learn more about heat of combustion:https://brainly.com/question/14317568
#SPJ1
A chemist accidentally leaves an open beaker containing 100.0 mL of a 0.400 M CuCl(aq) solution on a lab bench. They return a few days later to find that the volume of the solution has decreased to 30.0 mL. What is the molarity of this partially evaporated solution, assuming the solute does not evaporate? Give your answer to 2 decimal places.
Answer:
Me gusta el triángulo, la respuesta es triángulo.
Explanation:
How many molecules are in 6.00 mol He?
HELP!!!!!
What is the kinetic energy of a 7.26 kg bowling ball that is rolling at a speed of 2 m/s?
Answer:
its 2.86 kg I believe.......
Answer: 14.52J
Explanation:
Carbon dioxide readily absorbs radiation with an energy of 4.67×10−20 J. What is the wavelength () and frequency () of this radiation?
Frequency is in m. and the wavelength is 7.04 x10^13 s-1
it is not 4.26x10^-7
The carbon dioxide readily absorbs radiation with an energy of 4.67×10⁻²⁰J and wavelength is 7.04 x 10¹³, then the frequency is 4.26 x 10⁻¹¹ m.
What is frequency?Frequency can be defined as the number of occurrences of a repeating event per unit of time. It is also known as temporal frequency to emphasizes the contract to spatial frequency and can be called as ordinary frequency to emphasize the contract to angular frequency. It is denoted by f.
f = hc / ∧
f = 6.626 x 10⁻³⁴ x 3.0 x 10³ / 4.67 x 10⁻²⁰
f = 4.26 x 10⁻¹¹ m
Thus, carbon dioxide readily absorbs radiation with an energy of 4.67×10⁻²⁰J and wavelength is 7.04 x 10¹³, then the frequency is 4.26 x 10⁻¹¹ m.
To learn more about frequency, refer to the link below:
https://brainly.com/question/14316711
#SPJ1
Name the group of elements that will not participate in ionic bonding.
Alkali Metals
Alkaline Earth Metals
Transition Metals
Halogens
Noble Gases
Answer:
Noble Gases
Explanation:
Noble gases are very unreactive because they already have a full valence shell and therefore, do not need to bond.
Answer:
Noble gases
Explanation:
How is it possible to change electrical devices when the power is out?
(Please help!!)
Answer:
An uninterruptible power supply can save data during an outage, and a surge protector can prevent damage from a surge. Surge protectors absorb or ground overvoltage from spikes. Each time a surge protector does its job, resulting damage can reduce effectiveness for the next surge.
Explanation:
What pressure would 2.5 moles of N2 gas exerton the walls of a 10.0 L container at a temperature of 25 C (298 K)
Answer:
6.1 atm
General Formulas and Concepts:
Chemistry - Gas Laws
Combined Gas Law: PV = nRT
P is pressure in atmV is volume in Litersn is number of molesR is the gas constant: 0.0821 (L · atm)/(mol · K)T is temperature in KelvinsTemperature Conversion: K = °C + 273.15
Explanation:
Step 1: Define
n = 2.5 mol N₂
V = 10.0 L
T = 25 °C = 298.15 K
Step 2: Find Pressure P
Substitute: P(10 L) = (2.5 mol)(0.0821 (L · atm)/(mol · K)(298.15 K)Multiply: P(10 L) = 61.1953 L · atmIsolate P: P = 6.11953 atmStep 3: Check
We are given 2 sig figs as our lowest. Follow sig figs and round.
6.11953 atm ≈ 6.1 atm
Is atomic radius a periodic property of atoms??
. The molar mass of aluminum is 26.98 g/mol and the molar mass of fluorine is 19.00 g/mol. Calculate the molar mass of aluminum trifluoride, AlF3.
Answer:
83.98 g/mol
Explanation:
To find the molar mass of AlF₃, you need to add the individual molar masses of each element times their quantities. For instance, since there are 3 fluorine atoms in AlF₃, the molar mass of AlF₃ must include the molar mass of fluorine times 3.
Molar Mass (Al): 26.98 g/mol
Molar Mass (F): 19.00 g/mol
Molar Mass (AlF₃): 26.98 g/mol + 3(19.00 g/mol)
Molar Mass (AlF₃): 83.98 g/mol
The table below gives the numbers of protons, electrons, and neutrons in four atoms.
Atom Number of protons Number of electrons Number of neutrons
1 39 39 52
2 40 40 50
3 39 39 54
4 40 40 51
Based on the information that is given, which atom in the table has the highest mass?
1
2
3
4
Answer:
3. 39 39 54
Explanation:
Atoms are the smallest units of matter that have the characteristics of a chemical element. They consist of small particles called protons, electrons, and neutrons.
Protons are positively charged particles that make up the nucleus of the atom along with neutrons, neutrally charged particles. Their mass is almost the same - about 1 AMU (atomic mass unit). Electrons, the negatively charged particles, are much lighter than them and don't significantly contribute to the mass of the atom. Their mass is equal to about 1/2000 of the mass of a proton or neutron.
This is why we need to determine which atom out of the ones you were given has the highest number of protons and neutrons. The first has 91, the second 90, the third 93, and the fourth 91. This means that the third atom has the highest mass.
Elements that accept electrons easily have a
Answer:
Greater electronegativity and these are non metals.
Explanation:
Which of the following substances has bonds with the greatest ionic character?
A) CCl4
B) CuCl2
C)CaCl2
D)NCl3
Answer:
Explanation:
because Ca is of second group they have low ionization energy when react with chlorine they have more ionic character than other in given options
What is the chemical symbol?
Answer:
symbol is Al
Explanation:
aluminum is that element
please mark me brainliest
What is the correct structure for 7-methyl-4-octanone?
Answer:
7-METHYL-4-OCTANONE 7-methyloctan-4-one 20809-46-5 4-Octanone, 7-methyl- 7-methyl-octan-4-one More...
Explanation:
At 23°C, 85.0 grams of NaNO3(s) are dissolved in 100. grams of H2O(l).
Based on Table G, determine the additional mass of NaNO3(s) that must be dissolved to
saturate the solution at 23°C.
5g
Anything between 4 and 6 is ok.
The additional mass of solute to be added will be determined by the mass of solute required to saturate a solution of NaNO3 in 100. grams of H2O.
A saturated solution is one that contains just as much solute as it can normally hold at a given temperature. We should now that when additional solute is added to a saturated solution, the additional solute does not dissolve.
The table is not presented hence the question is incomplete. However, the additional mass of solute to be added will be determined by the mass of solute required to saturate a solution of NaNO3 in 100. grams of H2O.
Learn more about solubility: https://brainly.com/question/953809
Name the region of the atom where protons and
neutrons are located. This region is indicated by
label B.
Name the region of the atom where electrons are
located. This region is indicated by label A.
DONE
Answer:
B. Nucleus
A. Orbitals
Explanation:
Ed22
The region of the atom where protons and neutrons are located (B) is called the nucleus.
The region of the atom where electrons are located (A) is called orbits.
In an atom, the nucleus is the central core that contains protons and neutrons. It is a tiny, dense region located at the center of the atom. Protons have a positive charge, while neutrons are electrically neutral (have no charge). The number of protons in the nucleus determines the element's identity.
Orbits (also called electron shells or energy levels) are the regions around the nucleus where electrons are found. Electrons are negatively charged particles that move within these orbits. Each orbit has a specific energy level, and electrons closer to the nucleus have lower energy levels. Electrons occupy the lowest available energy levels first before moving to higher levels as the atom gains more electrons.
Learn more about Atoms, here:
https://brainly.com/question/1566330
#SPJ5
The complete question is shown in the image attached below -
When testing for hydrogen gas in the laboratory a glowing splint is inserted into the gas which results in a pop sound. What is associated with the formation of the pop sound?
A. physical change
B. chemical change
C. exothermic reaction
D. endothermic reaction
In each of the following sets of elements, which
element would be expected to have the highest
ionization energy?
a. Cs, R, Li
b. Ba, Sr, Ca
c. I, Br, C1
d. Mg, Si, S
Answer:
c. I, Br, Cl
Explanation:
The option C group of elements is expected to have the highest ionization energy.
Ionization energy is the energy needed to remove the most loosely held electron from an atom.
As such, ionization energy increases from left to right on the periodic table. It reduces from top to bottom The groups to the right will not readily lose their electrons. Therefore, I, Br and Cl being in group 7 will have the highest ionization energy.Calculate the molarity of the two solutions.
The first solution contains 0.350 mol of NaOH in 1.05 L of solution.
molarity:
The second solution contains 14.3 g of NaCl in 879 mL of solution.
molarity:
1. 0.33 M
2. 0.278 M
Further explanationMolarity is a way to express the concentration of the solution
Molarity shows the number of moles of solute in every 1 liter of solute or mmol in each ml of solution
[tex]\large{\boxed {\bold {M ~ = ~ \frac {n} {V}}}[/tex]
Where
M = Molarity
n = Number of moles of solute
V = Volume of solution
1. 0.350 mol of NaOH in 1.05 L of solution.
n=0.35
V=1.05 L
Molarity :
[tex]\tt M=\dfrac{0.35}{1.05}=0.33[/tex]
2. 14.3 g of NaCl in 879 mL of solution.
mol NaCl(MW=58.5 g/mol) :
[tex]\tt mol=\dfrac{mass}{MW}\\\\mol=\dfrac{14.3~g}{58.5~g/mol}=0.244[/tex]
Molarity :
[tex]\tt M=\dfrac{0.244}{0.879~L}\\\\M=0.278[/tex]