The displacement of the horse is 38.4 m/s.
Given :
velocity of the horse = 3.2 m/s
The time that the horse
displacement of the horse =?
According to the formula,
velocity = displacement/time
we can get the value of displacement.
That is, displacement = velocity×time
Substituting the values of velocity and time, we get
displacement = 3.2 × 12 m
That is, displacement = 38.4 m
Hence, the displacement of the horse is 38.4 m/s.
It measures the length and angle of the net motion, or total motion, in a straight line from the starting point to the destination of the point trajectory. The translation that links the starting point and the ending point can be used to spot a displacement. The final location of a point relative to its beginning position xi, or a relative position (derived from the motion), is another way to express a displacement. The difference between the end and beginning positions can be used to define the equivalent displacement vector:
To learn more about displacement refer to the link:
brainly.com/question/11934397
#SPJ9
Nellie whirls a tether ball in a horizontal circular path over her head. if the action force is nellie pulling on the string, the reaction force is?
The reaction force is string pulling on the Nellie when a tether ball in a horizontal circular path over her head .
A reaction force is a force that acts in the opposite direction to an action force. i.e. Newton's third law of motion describes action and reaction forces and the law states that for every action force, there is an equal and opposite reaction force.
There are Newton's three law of motion which can be describe as ,
The first law is can be stated as, an object will not change its motion unless a external force acts on it.
The second law is describe as, the force on an object is equal to its mass times its acceleration. i.e.
F = ma
In above equation F is force , m is mass and a is acceleration on an object.
The third law can be explained as, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.
Therefore , from the above discussion can be said as Nellie whirls a tether ball in a horizontal circulars path over her head. if the action force is nellie pulling on the string, the reaction force is string pulling on the Nellie.
To know more about reaction force
https://brainly.com/question/13609752
#SPJ1
13. How are controlled experiments useful?
A plane is traveling 50m drops a package of explores of 134m the acceleration of gravity is 9.8 where does the package strike
Explanation:
Throughout this question, we will be taking the position at which the package is dropped as the origin.
We know that the package lands 100 m from the initial position. We have to investigate the position in the horizontal direction.
To do that, let's first calculate the time of flight of the package.
Here is what we know about the vertical motion taking the downward direction as the positive direction:
the vertical displacement is
s
=
100
m
.
the acceleration is
a
=
g
=
9.81
m
/
s
2
.
the initial velocity of the package is
u
=
0
m
/
s
.
By using an equation that connects the details that we have with the time of flight
t
, we get the time of flight as follows:
s
=
u
t
+
1
2
a
t
2
s
=
0
+
0.5
a
t
2
Make
t
the subject
0.5
a
t
2
=
s
t
2
=
s
0.5
a
t
=
√
s
0.5
a
=
√
100
m
0.5
(
9.81
m
/
s
2
)
≈
4.52
s
The horizontal displacement
x
equals the product of the horizontal velocity
v
x
=
40.0
m
/
s
and the time of flight
t
=
4.52
s
, i.e.
x
=
v
x
t
=
40.0
m
/
s
(
4.52
s
)
≈
181
m
The package will strike the ground at
(
181
m
;
−
100
m
)
.
Part b)
The horizontal component of the velocity is constant throughout the flight and is
v
x
=
40.0
m
/
s
.
For the downward motion, here is what we know:
the vertical displacement is
s
=
100
m
.
the acceleration is
a
=
g
=
9.81
m
/
s
2
.
the initial velocity of the package is
u
=
0
m
/
s
.
By applying an equation that combines the details that we have with the final instantaneous velocity
v
=
v
y
, we get the final instantaneous velocity as follows:
v
2
=
u
2
+
2
a
s
v
=
√
u
2
+
2
a
s
v
y
=
√
(
0
m
/
s
)
2
+
2
(
9.8
m
/
s
2
)
(
100
m
)
≈
44.3
m
/
s
The velocity vector at the instant the package just hits the ground is (40.0 m/s ; 44.3 m/s).
Part c)
At the instant that the plane hits the ground, the plane's position is (181 m ; 0 m): i.e. the plane is directly on top of the package and 100 meters above the ground. This is because horizontally, the plane and the package move with the same velocity.
Part d)
The vertical component of the velocity of the package increases at a steady rate. In fact, the rate or gradient is the acceleration
g
=
9.8
m
/
s
2
.
which of the forces have infinite range? group of answer choices weak nuclear force only both gravitational and weak nuclear forces electromagnetic force only both electromagnetic and gravitational forces
The gravitational force and the electromagnetic force are the two forces that have infinite ranges.
There are four fundamental forces in nature. They are:
Gravitational forceElectromagnetic ForceWeak Nuclear ForceStrong Nuclear ForceThe strength and range of the fundamental forces are mentioned in the table given in the adjoining image.
Out of the four forces, two forces are there whose range is infinite i.e gravitational force and electromagnetic force, and the other two forces i.e., weak nuclear force and strong nuclear force have extremely short ranges.
Thus, both gravitational force and electromagnetic force are two forces that have infinite ranges.
To know more about the "fundamental forces", refer to the following link:
https://brainly.com/question/28027715?referrer=searchResults
#SPJ4
Name the three particles of the atom and their respective charges (positive, negative, neutral)
Answer:
Positive: Proton, Negative: Electron, Neutral: Neutron
Explanation:
Help asap.
How do particles move when a transverse wave passes through a medium?
A. Up to a crest, then down through a trough, then back
B. Through a compression followed by a rarefaction
C. In wavelengths and amplitudes
OD. Along circular or elliptical paths
Answer:Transverse waves cause the medium to move perpendicular to the direction of the wave.
Explanation:
In a transverse wave, particles of the medium vibrate up and down perpendicular to the direction of the wave. In a longitudinal wave, particles of the medium vibrate back and forth parallel to the direction of the wave.
Imagine a time-position graph where the velocity of an object is constant. What will be observed on the graph concerning the slope of the line segment as well as the velocity of the object? (1 p
O The slope of the line is positive, and the object will be stationary.
O The slope of the line is negative, and the object will be stationary.
O The slope of the line is equal to zero and the object will be stationary.
O The slope of the line is equal to zero and the object will be in motion.
D. The slope of the line is equal to zero and the object will be in motion.
What is constant velocity?Velocity of a body is said to be constant, if it covers equal distances in equal intervals of time, and also does not change the direction it is moving in
To have a constant velocity, an object must have a constant speed in a constant direction.
Slope of the position time graphslope = change in velocity / change in time
if the velocity is constant, then change in velocity = 0
slope = 0/change in time = 0
In constant velocity, the object will be in motion, but the velocity of the object will not change.
Thus, the slope of the line is equal to zero and the object will be in motion.
Learn more about constant velocity here: https://brainly.com/question/529176
#SPJ1
========================================================
Hello! Lets begin!
1. Which answer best describes displacement?
A) Displacement is a vector quality showing total length of an area traveled by a particular object.2. Kelley is playing pool and hits the cue into the nine ball, which is directly in the center of the pool table. The nine ball travels a total of 7 meters before stopping, 1 meter to the left of the initial starting point of the nine ball. Which sentence reflects the correct statement regarding distance and displacement when considering the motion of the nine ball?
D) The nine ball traveled a distance of 7 meters and was displaced by 1 meter.3. What is velocity?
B) Velocity is a vector quantity that tells the distance an object has traveled over a period of time.4. Imagine a time-position graph where the velocity of an object is constant. What will be observed on the graph concerning the slope of the line segment as well as the velocity of the object?
C) The slope of the line is equal to zero and the object will be stationary.5. Select the option that best summarizes the reason for the use of position-time graphs when studying physical science.
B) The position-time graphs show the relationship between the position of an object (shown on the y-axis) and the time (shown on the x-axis) to show velocity._______________________________________________________
Good luck my peeps! ;D
How much heat energy is required to raise the temperature of 7 kg of Copper from 0°C to 10°C?
Answer:
H= Mass × specific heat capacity ×change in temperature
= 2×380×(10-0)
=2×380×10
=7600 Joules
what comes to your mind when you think about the Energy, Forces, and Earth's Crust?
Clara jogs 600 m in 5 minutes
A population of a tree snail species has different patterns in their shells. These slight differences in appearance among the individual members of the species are called variations. How do you think these variations get passed on from one generation of tree snails to the next? Select the answer that best matches your thinking.
The variations get passed on from one generation of tree snails to the next from both parents to offspring and through the environment (Option C is correct).
What is genetic variation?The expression of genetic variation refers to differences in the nucleotide sequences between individuals of the same special which are passed across generations from parents to offspring and are selected by natural selection.
In conclusion, the variations get passed on from one generation of tree snails to the next from both parents to offspring and through the environment (Option C is correct).
Learn more about genetic variation here:
https://brainly.com/question/14926046
#SPJ1
if a resistor with a current of 20 ma through it converts 12 j of electrical energy into heat energy in 60 s, what is the voltage across the resistor?
The voltage across the resistor is 0.2V.
Heat energy is given as H = [tex]I^{2}[/tex]Rt.
What is a resistor ?Voltage across the resistor is
V= 0.2v
12 = [tex]0.02^{2}[/tex]×R×60
R= 500 ohms.
voltage across the resistor is
V=IR
V= 0.02^{2} ×500
V= 0.2V
A resistor is an electrical component with two terminals that implements electrical resistance as a circuit element. Resistors are employed in electronic circuits for a variety of purposes, including lowering current flow, adjusting signal levels, dividing voltages, biasing active devices, and terminating transmission lines.
An electrical component known as a resistor controls or restricts the passage of electrical current in an electronic circuit. Additionally, resistors can be used to supply a specified voltage to an active device like a transistor.
To learn more about resistor from the given link:
brainly.com/question/24297401
#SPJ4
rajesh used a lens to burn a piece of paper.what is the lens?draw a ray diagram related to this process
If we want to burn a paper by focusing sunlight then we have to use a converging lens that can converge all sunlight at a point called the focus.
Thus Convex lens is used to burn the paper.
What is the lens?The transmissive optical device known as a lens employs refraction to focus or disperse a light beam. While a compound lens is made up of numerous simple lenses (elements), they are typically oriented along a common axis, as opposed to a simple lens, which is made up of a single transparent piece. Materials like glass or plastic are used to create lenses, which are then polished, ground, or molded into the desired shape. Unlike a prism, which refracts light without concentrating, a lens can focus light to create an image. Lenses are also used to describe instruments that focus or scatter waves of radiation other than visible light, such as explosives, microwaves, and electron lenses.
To know more about convex lens visit:- https://brainly.com/question/27038900
#SPJ4
To obtain the approximate short-circuit current values when two hot conductors of a 3-phase system are shorted together, use _____ percent of the 3-phase current value.
To obtain the approximate short-circuit current values when two hot conductors of a 3-phase system are shorted together, use _maximum percent of the 3-phase current value.
short circuit- It is an electrical circuit in which current finds a way to bypass the appliances on a path that has little or no resistance.
In the 3- phase system, there are three power wires which carries load.
most common. Types of three phase system are known as wye and delta.
Delta configuration has only three wires. Wye configuration may have a fourth, neutral ,wire.To obtain the approximate short-circuit current values when two hot conductors of a 3-phase system are shorted together, use _maximum percent of the 3-phase current value.
To know more about current.
https://brainly.com/question/16017088
#SPJ1
When a coin is tossed in the air, it travels upward, gradually slows down, momentarily reaches zero speed, then moves back
downward with increasing speed. Which statement best explains this change in the coin's motion?
a.The force of gravity causes the coin to change its velocity.
b.The coin's inertia decreases on the way up and increases on the way down.
c.The action-reaction force pair of gravity and the applied force cancel each other.
d.The coin remains in its state of upward motion until the force.
A. The force of gravity causes the coin to change its velocity.
What is the effect of force gravity on the upward motion of an object?
Force of gravity always act toward the center of the earth , so when an object is thrown up, the force of gravity will act in opposite direction of motion, that's toward the center of earth.
This will cause the object moving upwards to slow down due to the force of gravity acting on the opposite direction of the object's upward motion.
When a coin is tossed in the air, it travels upward, gradually slows down, momentarily reaches zero speed, then moves back downward with increasing speed due to effect of force of gravity.
Thus, the statement that best explains the change in the coin's motion is "The force of gravity causes the coin to change its velocity".
Learn more about force of gravity here: https://brainly.com/question/10119978
#SPJ1
As a freely falling object picks up downward speed, what happens to the power supplied by the gravitational force?.
The power supplied by the gravitational force will increase because (Power=work/time).
What happens to a freely falling object's speed as it descends?A falling object gains momentum as it descends.
An increase in air resistance is caused by a speed increase.
At some point, the force of air resistance grows strong enough to counteract the pull of gravity.
Since there is no net force at this point, the object will stop accelerating.
Although the direction and magnitude of velocity fluctuate, the acceleration caused by gravity remains constant and downward.
The ball has zero velocity at the highest point in its trajectory, and it picks up speed as it descends back toward the earth.
To learn more about speed, refer
https://brainly.com/question/24598572
#SPJ4
6. A person walks 60.0 m and then he walks 130 m.
What is the person's distance?
Answer:
130+60=190
Explanation:
i.e. if you asked for the distance covered by the person
A concave mirror has a focal length of 8em. A real object of height 2em is placed 12cm from the mirror. Calculate the distance of the image from the mirror. If the height of the image formed is 4cm.
If the height of the image formed is 4cm, the distance of the image from the mirror is - 24 cm
According to mirror formula,
[tex]\frac{1}{f} = \frac{1}{v} + \frac{1}{u}[/tex]
f = Focal length
v = Image distance
u = Object Image distance
m = Magnification
[tex]h_{o}[/tex] = Object height
[tex]h_{i}[/tex] = Image height
f = - 8 cm
u = - 12 cm
[tex]h_{o}[/tex] = 2 cm
[tex]h_{i}[/tex] = 4 cm
1 / ( - 8 ) = 1 / v - 1 / 12
1 / v = - 1 / 24
v = - 24 cm
The formula used to relate focal length with image and object length is mirror formula. This formula can be used for both plane mirror and spherical mirrors such as concave and convex mirrors.
Therefore, the distance of the image from the mirror is - 24 cm
To know more about mirror formula
https://brainly.com/question/8512677
#SPJ1
Please help I will mark brainliest
Answer:
1.) B
2.) Polar Regions or high altitudes.
Explanation:
An egg is dropped from a treehouse and takes 1.5 seconds to reach the ground. We can ignore air
resistance.
What is the egg's displacement?
11 m
Explanation:
d = 1/2 a t^2
= 1/2 (9.81)(1.5)^2 =11 m
how can i eat a pizza with my toes
Answer:
You grab (grasp or seize suddenly and roughly.) the pizza with your toes
Explanation:
Answer:
First, you have to wash your toes to get all the germs off.
Next, make sure you have a good grip on the pizza.
Then, make sure you are in a comfortable position.
Next, wrap your leg around your neck so the pizza can reach.
Finally, you can enjoy your pizza.
Hope this helped!
the elastic cords used for bungee jumping are designed to endure large strains. consider a bungee cord that stretches to a maximum length 3.51 times the original length. there are different ways to report this extensional deformation.
The ratio of (ε true/ε engr) = (1.2556/2.51) = 0.5002
So, the engineering strain is around 0.5002 bit wrong from the value of the true strain. This calculated value of difference is known as the extensional deformation.
For finding out the Engineering strain,
Engineering strain is a unit used to describe how much a material deforms when subjected to a specific force. It is equal to the amount of deformation divided by the material's initial length in the direction of the applied force.
⇒ε(engineering) = ΔL/L₀
⇒Lₓ= final length = 3.51 L₀
⇒L₀ = original length = L₀
⇒ΔL = Lₓ- L₀
= 3.51 L₀ - L₀
= 2.51 L₀
⇒ε(engineering) = ΔL/L₀
= (2.51L₀)/L₀
= 2.51
For finding out the True Strain,
Deformation is measured by True Strain. It can be calculated by integrating the strain across short time intervals and adding them up. Hence,
⇒ε(true) = In (Lₓ/L₀)
⇒Lₓ = 3.51L₀
⇒L₀ = L₀
⇒ε(true) = In (Lₓ/L₀)
= In (3.51L₀/L₀)
= In 3.51
= 1.2556
So, dividing both the values, we get
(ε true/ε engr) = (1.2556/2.51) = 0.5002
The complete question is as follows:
The elastic cords used for bungee jumping are designed to endure large strains. Consider a bungee cord that stretches to a maximum length 3.51 times the original length. There are different ways to report this extensional deformation. Calculate how wrong' the engineering strain is compared to the true strain by evaluating the ratio: ε true/ε engr
To solve sums regarding extensional deformation go to https://brainly.com/question/15018276
#SPJ4
a neutron star is the remnant left after certain supernovae (explosions of giant stars). typically, neutron stars are about 21 km in diameter and have around the same mass as our sun. what is a typical neutron star density in g/cm3 ?
The density of the neutron star is ρ = [tex]7.733[/tex]×[tex]10^{14}[/tex] [tex]g/cm^{3}[/tex].
What is a neutron star?The volume of the neutron star is
V=([tex]4\pi /3[/tex])×[tex]R^{3}[/tex]
V= [tex]25.72^{17} cm^{3}[/tex]
Now the density of the neutron star is
ρ = M/V
ρ = [tex]7.733[/tex]×[tex]10^{14}[/tex]g/[tex]cm^{3}[/tex]
The collapsing core of a large supergiant star with a total mass of between 10 and 25 solar masses—possibly even more if the star was very metal-rich—is what we refer to as a neutron star. Neutron stars are the tiniest and densest class of stellar objects currently known, with the exception of black holes and other hypothetical phenomena.
Although the galaxy may contain hundreds of millions of ancient neutron stars, only about 1,000 pulsars are known to exist. Although the enormous pressures found at neutron star cores may be similar to those at the moment of the big bang, conditions like this cannot be replicated on Earth.
To learn more about neutron star from the given link:
brainly.com/question/1322201
#SPJ4
URGENT!! ILL GIVE BRAINLIEST! AND 100 POINTS
The diagram shows two girls pushing on a box with equal and opposite forces. Which statement best describes the forces required to move the box to the right?
Answer: the forces must be unbalanced, with the force from the left greater than the force from the right.
Explanation:
Which phrase best describes the amplitude of longitudinal waves?
OA. The maximum pressure at a compression
B. The vertical distance from a trough to the midpoint
O C. The distance from a compression to a rarefaction
D. The vertical distance from the midpoint to a crest
What is the average speed across my bunny’s entire trip when she hops 6 meters to the east across the room in 11 seconds and then takes another 12 seconds to hop back to her initial position? Express your answer using the proper SI units round your to two decimal places include a direction if necessary
Help me asap calculating average velocity and speed
The average speed of bunny's entire trip is 0.52 m/s and her average velocity is 0 m/s.
What is average speed?The average speed of an object is the ratio of total distance travelled to the total time of motion of the object.
V(speed) = total distance / total time of motion
V(speed) = (6 m + 6 m) / (11 s + 12 s)
V(speed) = (12 m) / (23 s)
V(speed) = 0.52 m/s
What is average velocity?The average velocity of an object is the ratio of total displacement to total time of motion of the object.
V(velocity) = total displacement / total time of motion
V(velocity) = (6 m - 6m) / (11 s + 12 s)
V(velocity) = (0 m) / (23 s)
V(velocity) = 0 m/s
Thus, the average speed of bunny's entire trip is 0.52 m/s and her average velocity is 0 m/s.
Learn more about average speed here: https://brainly.com/question/6504879
#SPJ1
During the experiment, the temperature of the spectrophotometer cavity is measured before inserting the cuvette. what is the main purpose of recording this temperature?
Dilution is needed to bring the unknown’s absorbance within the range of the standard curve.
If the dilution procedure is documented, it is possible to calculate the full-strength concentration after determining the diluted unknown quantity. Beer’s Law only applies to diluted solutions; hence it is preferable to dilute the unknown than to create new standards.
WHAT PURPOSE DOES A SPECTROPHOTOMETER SERVE?Spectrophotometers gauge transmittance (T) and absorbance (A) (T). Photons per second are used to quantify the light’s intensity. A blank sample, which does not absorb light when light passes through it, is represented as (I).
What is the spectrophotometer’s fundamental tenet?The principle of the spectrometer. The spectrophotometer is a device that calculates how much light a substance absorbs.
The spectrophotometer measures the light intensity of a sample by passing a light beam through it.
How does a spectrophotometer function and what is it?A spectrophotometer is a device that counts the number of photons (light’s energy) absorbed after they have passed through a sample solution.
The spectrophotometer can also be used to determine the concentrations (amounts) of known chemical substances.
To know more about spectrophotometer visit:
https://brainly.com/question/24195565
#SPJ4
A hockey player is standing on his skates on the Rideau Canal when an opposing player, moving with a uniform speed of 2.8 m/s, skates by with the puck. After 3.0 s, the first player makes up his mind to chase his opponent. If he accelerates uniformly at 3.5 m/s^2
a. How long does it take him to catch his opponent?
b. How far has he travelled in this time? (Assume the player with the puck remains in motion at a constant speed.)
After 3.0 s, If the first player makes up his mind to chase his opponent. If he accelerates uniformly at 3.5 m/s^2 then it would take 3.13 seconds to catch his opponent.
What are the three equations of motion?There are three equations of motion given by Newton,
v = u + at
S = ut + 1/2×a×t²
v² - u² = 2×a×s
As given in the problem, a hockey player is standing on his skates on the Rideau Canal when an opposing player, moving with a uniform speed of 2.8 m/s, skates by with the puck. After 3.0 s, the first player makes up his mind to chase his opponent. If he accelerates uniformly at 3.5 m/s^2,
Let us assume the time taken to catch up would be t seconds.
The distance traveled by the hockey player = 2.8×3 + 2.8×t
By using the second equation of the motion,
s = ut+0.5at² = 2.8×3 + 2.8×t
1.75t² - 2.8t -8.4 = 0
t = 3.13 seconds
The distance traveled by the hockey player to catch up = 2.8×(3+3.13)
=17.164 meters
Thus, it would take 3.13 seconds to catch his opponent.
To learn more about equations of motion from here, refer to the link;
brainly.com/question/5955789
#SPJ1
The biggest school in the world is in lucknow, india. it has more than 40,000 students and 2500 teachers! would it be easier to make new friends in a school with 40,000 kids than a school with fewer than 100 kids?
School population.
What is the population in school?The total number of full-time and part-time students who were enrolled in the institution during the reporting period.The biggest school in the world is the City Montessori School in Lucknow. With more over 45,000 students, it was included as the largest city school in the Guinness Book of World Records in 2013.The degree to which pupils engage with or participate in a lesson, course, etc.Education among the populace contributes to the well of their families and communities. Education about the population raises students' and teachers' awareness while also changing their attitudes.The biggest school in the world is in lucknow, india. it has more than 40,000 students and 2500 teachers! would it be easier to make new friends in a school with 40,000 kids than a school with fewer than 100 kids? School population.
To learn more about the School population, refer to:
https://brainly.com/question/25896797
#SPJ4
a brick is dropped (zero initial speed) from the roof of a building. the brick strikes the ground in 1.90 s. you may ignore air resistance, so the brick is in free fall.
If A brick is dropped (zero initial speed) from the roof of a building. The brick strikes the ground in 1.90s then the building is 17.69 meters tall.
What is velocity?Velocity is the directional speed of a moving item as an indication of its rate of change in position as seen from a specific frame of reference and measured by a specific time standard (e.g., 60 km/h northbound). The idea of velocity is crucial in kinematics, the part of classical mechanics that explains the motion of bodies.
A physical vector quantity called velocity requires both magnitude and direction to be defined. Speed is a coherent derived unit that expresses the scalar absolute value (magnitude) of velocity. Its quantity is expressed in SI units (metric system) of metres per second (m/s or ms1). For example, "5 meters per second" is a scalar while "5 meters per second east" is a vector.
We have given that
u = 0 m/s (initial velocity)
t = 1.90 s (time)
a = g = 9.80 m/s² (acceleration = falling = gravity)
We will use the second equation of motion to determine the height(S) of the building in meters:
⇒ S = [tex]ut + \frac{1}{2} at^2[/tex]
⇒ S = (0)(1.90) + [tex]\frac{1}{2}[/tex](9.80)(1.90)²
⇒ S = 4.9 × 3.61
= 17.69 meters
Learn more about velocity
brainly.com/question/80295?source=archive
#SPJ4
Full question
A brick is dropped (zero initial speed) from the roof of a building. The brick strikes the ground in 1.90 s. You may ignore air resistance, so the brick is in free fall. (a) How tall, in meters, is the building?