Answer:
The magnitude of the velocities of the two balls after the collision is 3.1 m/s (each one).
Explanation:
We can find the velocity of the two balls after the collision by conservation of linear momentum and energy:
[tex] P_{1} = P_{2} [/tex]
[tex] m_{1}v_{1_{i}} + m_{2}v_{2_{i}} = m_{1}v_{1_{f}} + m_{2}v_{2_{f}} [/tex]
Where:
m₁: is the mass of the ball 1 = 100 g = 0.1 kg
m₂: is the mass of the ball 2 = 300 g = 0.3 kg
[tex]v_{1_{i}}[/tex]: is the initial velocity of the ball 1 = 6.20 m/s
[tex]v_{2_{i}}[/tex]: is the initial velocity of the ball 2 = 0 (it is at rest)
[tex]v_{1_{f}}[/tex]: is the final velocity of the ball 1 =?
[tex]v_{2_{f}}[/tex]: is the initial velocity of the ball 2 =?
[tex] m_{1}v_{1_{i}} = m_{1}v_{1_{f}} + m_{2}v_{2_{f}} [/tex]
[tex] v_{1_{f}} = v_{1_{i}} - \frac{m_{2}v_{2_{f}}}{m_{1}} [/tex] (1)
Now, by conservation of kinetic energy (since they collide elastically):
[tex] \frac{1}{2}m_{1}v_{1_{i}}^{2} = \frac{1}{2}m_{1}v_{1_{f}}^{2} + \frac{1}{2}m_{2}v_{2_{f}}^{2} [/tex]
[tex] m_{1}v_{1_{i}}^{2} = m_{1}v_{1_{f}}^{2} + m_{2}v_{2_{f}}^{2} [/tex] (2)
By entering equation (1) into (2) we have:
[tex] m_{1}v_{1_{i}}^{2} = m_{1}(v_{1_{i}} - \frac{m_{2}v_{2_{f}}}{m_{1}})^{2} + m_{2}v_{2_{f}}^{2} [/tex]
[tex] 0.1 kg*(6.20 m/s)^{2} = 0.1 kg*(6.2 m/s - \frac{0.3 kg*v_{2_{f}}}{0.1 kg})^{2} + 0.3 kg(v_{2_{f}})^{2} [/tex]
By solving the above equation for [tex]v_{2_{f}}[/tex]:
[tex]v_{2_{f}} = 3.1 m/s [/tex]
Now, [tex]v_{1_{f}}[/tex] can be calculated with equation (1):
[tex] v_{1_{f}} = 6.20 m/s - \frac{0.3 kg*3.1 m/s}{0.1 kg} = -3.1 m/s [/tex]
The minus sign of [tex] v_{1_{f}}[/tex] means that the ball 1 (100g) is moving in the negative x-direction after the collision.
Therefore, the magnitude of the velocities of the two balls after the collision is 3.1 m/s (each one).
I hope it helps you!
cooking utensils are made up of metal
Explanation:
Cooking utensils are made of metal such as copper, aluminium, brass, steel etc., so that heat is easily conducted through the base to their contents. But they are provided with handles of bad conductors
HELP PLEASE
When a magnet spins in a oil of wire it generates
A. Magnetism
B.convection
C. Radiation
D.electricity
Answer:
A, Magnetism
Explanation:
An ordinary electric generator produces electric power by spinning a strong magnet inside a set of wire coils. As the magnet spins, its magnetic field sweeps across the coils and gives rise to electric fields in those coils.
Hope this helps!!
What fraction of an iceberg is submerged? (ρice = 917 kg/m3, ,ρsea = 1030 kg/m3.)
Answer:
Choice d. Approximately [tex]89\%[/tex] of the volume of this iceberg would be submerged.
Explanation:
Let [tex]V_\text{ice}[/tex] denote the total volume of this iceberg. Let [tex]V_\text{submerged}[/tex] denote the volume of the portion that is under the liquid.
The mass of that iceberg would be [tex]\rho_\text{ice} \cdot V_\text{ice}[/tex]. Let [tex]g[/tex] denote the gravitational field strength ([tex]g \approx 9.81\; \rm N \cdot kg^{-1}[/tex] near the surface of the earth.) The weight of that iceberg would be: [tex]\rho_\text{ice} \cdot V_\text{ice} \cdot g[/tex].
If the iceberg is going to be lifted out of the sea, it would take water with volume [tex]V_\text{submerged}[/tex] to fill the space that the iceberg has previously taken. The mass of that much sea water would be [tex]\rho_\text{sea} \cdot V_\text{submerged}[/tex].
Archimedes' Principle suggests that the weight of that much water will be exactly equal to the buoyancy on the iceberg. By Archimedes' Principle:
[tex]\text{buoyancy} = \rho_\text{sea} \cdot V_\text{submerged} \cdot g[/tex].
The buoyancy on the iceberg should balance the weight of this iceberg. In other words:
[tex]\underbrace{\rho_\text{ice} \cdot V_\text{ice} \cdot g}_\text{weight of iceberg} = \underbrace{\rho_\text{sea} \cdot V_\text{submerged} \cdot g}_\text{buoyancy on iceberg}[/tex].
Rearrange this equation to find the ratio between [tex]V_\text{submerged}[/tex] and [tex]V_\text{ice}[/tex]:
[tex]\begin{aligned} &\frac{V_\text{submerged}}{V_\text{ice}} \\&= \frac{\rho_\text{ice} \cdot g}{\rho_\text{sea} \cdot g}\\ &= \frac{\rho_\text{ice}}{\rho_\text{sea}}\ = \frac{917\; \rm kg \cdot m^{-3}}{1030\; \rm kg \cdot m^{-3}} \approx 0.89 \end{aligned}[/tex].
In other words, [tex]89\%[/tex] of the volume of this iceberg would have been submerged for buoyancy to balance the weight of this iceberg.
Why does a stop sign appear red?
Answer:
because it’s suppose to be red like a stop light.
Explanation:
So it tells you to stop
Suppose you are told that acceleratioon A with of particle moving with uniform sleep v in a circle of radius R is proportional to same power of r(r) and same power of V. Determine the radius of A in and write the Simple form of equation for the acceleratioon
The equation for centripetal acceleration is:
[tex]A = \frac{V^{2} }{R}[/tex]
Centripetal acceleration is the rate at which a body moves through a circle. Due to the fact that velocity is a vector quantity (i.e., it has both a magnitude, the speed, and a direction), when a body travels in a circle, its direction is continually changing, which causes a change in velocity, which results in an acceleration.
The equation for centripetal acceleration is:
[tex]A = \frac{V^{2} }{R}[/tex]
therefore, the centripetal acceleration, denoted by the symbol A, has a magnitude equal to the square of the body's velocity along the curve divided by the radius of the circle, denoted by the symbol r. Units for centripetal acceleration are metres per second squared.
Learn more about centripetal acceleration here:
https://brainly.com/question/14465119
#SPJ9
A student adds two vectors of magnitudes 48 m and 22 m. What are the maximum and minimum possible values for the resultant of these two vectors.
Answer:
Maximum=70 m
Minimum=26 m
Explanation:
Vector Addition
Since vectors have magnitude and direction, adding them takes into consideration not only the magnitudes but also their respective directions. Two vectors can be totally collaborative, i.e., point to the same direction, or be totally opposite. In the first case, the magnitude of the sum is at maximum. Otherwise, it's at a minimum.
Thus, the maximum magnitude of the sum is 48+22 = 70 m and the minimum magnitude of the sum is 48-22= 26 m
In an oil drop experiment, a drop with a weight of 1.9 x 10-14 N was suspended when the potential difference between 2 plates that were 63 mm apart was 780 V. What was the charge on the drop?
Answer:
Study More You will get it :L
you pick up a 3.8 kg can of paint from the ground a lift it to a height of 1.4 m. you hold the can stationary for half a minute, waiting for a friend on a ladder to take it. how much work do you do duting this time (when the can of paint is stationary)?
Answer:
No work
Explanation:
During the time of holding the can stationary, no work is being done by the person carrying the can.
The can is simply at rest.
Work is done when a force is applied to move a body through a certain distance.Work done = force x distance
In the instance given in this problem, only when the paint was lifted up is work done.
When the paint is stationary and being supported by the person, no work is done.
Which component of an atom contains the MAJORITY
of its mass?
Answer:
proton and neutrons
Explanation:
electron has negligible mass
Two magnets are placed near each other on a space station orbiting Earth.
Their north and south poles are facing each other. Which statement explains
what will happen to the magnets?
O A. They will be attracted because they are in each other's magnetic
field.
B. They will be repelled because they are in each other's gravitational
field.
O C. They will be attracted because they are in each other's electric
field.
O D. They will be repelled because they are in each other's magnetic
field.
Two magnets are placed near each other on a space station orbiting Earth and their north and south poles are facing each other then they will be attracted because they are in each other's magnetic field. The correct option is A.
What is a magnetic field?A magnetic field could be understood as an area around a magnet, magnetic material, or an electric charge in which magnetic force is exerted.
For a simple bar magnet, N-pole and S-pole are the points on a magnet that have the strongest magnetic field. The magnetic field originates from the north pole and terminates in the south pole of a magnet.
For two magnets placed in space with north and south poles are facing each other they will be attracted because they are in each other's magnetic field. Therefore the correct option is A.
Learn more about the magnetic fields from here
https://brainly.com/question/23096032
#SPJ5
1. On a force vs. mass graph, what would be the slope of the line?
2. On a Free Body Diagram, if the forces are all balanced, what do you know about the
object? Can it be moving?
1. By Newton's second law,
F = m a
so the slope of the line would represent the mass of the object.
2. If all the forces are balanced, then the object is in equilibrium with zero net force, which in turn means the object is not accelerating. So the object is either motionless or moving at a constant speed.
what is the velocity of this graph between points b and c
Answer:
D.) 0 m/s
Explanation:
This is a position versus time graph. These graphs compare the position of an object versus the elapsed time. You can find the velocity of position vs. time graphs by determining the slope between the two points.
The formula used to find slope is:
y₁ - y₂ = m(x₁ - x₂)
In this formula, "x₁" and "y₁" represent the values from one point, "x₂" and "y₂" represent the values from the second point, and "m" represents the slope.
If the first point, B, is at (1, 6) and the second point, C, is at (3, 6)...
6 - 6 = m(1 - 3) <----- Insert values from points
0 = m(-2) <----- Subtract
0 = m <----- Divide both sides by -2
In this case, the slope between point B and point C is 0. Thus, there is a constant velocity of 0 m/s between the points.
A monatomic ideal gas with volume 0.230 L is rapidly compressed, so the process can be considered adiabatic. If the gas is initially at 1.01 105 Pa and 3.00 102 K and the final temperature is 489 K, find the work done by the gas on the environment, Wenv.
Answer:
The value is [tex]W = - 17.53 \ J[/tex]
Explanation:
From the question we are told that
The volume is [tex]V = 0.230 \ L = 0.230 *10^{-3} \ m^{-3}[/tex]
The initial pressure is [tex]P_1 = 1.01105 \ Pa[/tex]
The initial temperature is [tex]T_1 = 3.00*10^2 \ K[/tex]
The final temperature is [tex]T_2 = 489 \ K[/tex]
Generally for an adiabatic process the workdone is mathematically represented as
[tex]W = - \Delta U[/tex]
Here [tex]\Delta U[/tex] is the internal energy of the system which is mathematically represented as
[tex]\Delta U = \frac{3}{2} * nR \Delta T[/tex]
So
[tex]W = - \frac{3}{2} * nR \Delta T[/tex]
Generally from ideal gas equation we have that
[tex]n = \frac{P_1V }{ RT_1 }[/tex]
Here R is the gas constant with value [tex]R = 8.314 J/mol\cdot K[/tex]
So
[tex]n = \frac{1.01 *0^{5} * 0.230 *10^{-3}}{ 8.314 * 3.0*10^2 }[/tex]
=> [tex]n = 0.009313 \ mol[/tex]
So
[tex]W = - \frac{3}{2} * 0.009313 * 8.314 * (451 - 3.00*10^2)[/tex]
=> [tex]W = - 17.53 \ J[/tex]
Which statement best describes why specific heat capacity is often more useful than heat capacity for scientists when comparing two materials?
Answer:
Specific heat capacity is an intensive property and does not depend on sample size.
Explanation:
A daring squirrel runs toward a cat, then turns around to safety. A graph of its velocity over time is shown
below.
Answer:
it's 1.0
Explanation:
kahn academee
4. AN OBJECT INCREASES ITS VELOCITY
FROM 22 M/S TO 36 M/S IN 5 S. WHAT IS
THE ACCELERATION OF THE OBJECT?
ET
Answer:
it is accelerating 14 m/s
Explanation:
Answer: 14/5
Explanation:
The object changed its velocity from 22 m/s to 36 m/s which is an increase of 14 m/s
This occurred in 5 seconds so the acceleration is 14/5 = 2.8 m/s^2
1. Final position minus the initial position is called
A 5.0-m-diameter merry-go-round is turning with a 3.7 s period. Part A What is the speed of a child on the rim
Answer:
Speed of a child on the rim is 4.25 m/s.
Explanation:
Given;
diameter of the merry-go-round, d = 5.0 m
period of the motion, t = 3.7 s
one complete rotation of the merry-go-round = πd
one complete rotation of the merry-go-round = π(5) = 15.71 m
Speed is given as distance / time
speed of a child on the rim = 15.71 / 3.7
speed of a child on the rim = 4.25 m/s
Therefore, speed of a child on the rim is 4.25 m/s.
You are testing a water heater design. One criterion is that the water heater heat water to a temperature of 180 °F. During testing, you find that the water in the water heater reaches a temperature of 200 °F. What would you do next?
Answer:
Explanation:
If the required max temperature needs to be 180 °F but the water temperature is hitting 200 °F then it is surpassing the desired temp and therefore failing to complete its purpose. Therefore, the next step would be to adjust the design and add a thermometer sensor to stop the water heater once the water temperature reaches the desired 180 °F. This would make the water heater serve its purpose as intended.
Choose the correct answer
Answer:
1.(c) 7
2.(d) 900
3.(b) two
4.(c) 0.0007
5.(d)0.0004
Explanation:
(1) White light after reflection through prism splits into 7 colors.
(2) Arabs and Chinese knew about lenses in about 900 AD
(3) There are Two more colors in the spectrum which cannot be seen with naked eye.
(4) Wavelength of red light is 0.0007mm
(5) Wavelength of violet light is 0.0004mm
What do you mean by pressure of a liquid? Write its Sl unit.
Answer:
Explanation:
The pressure of a liquid is the rate of the force applied by the liquid on a surface per unit area of the surface.
i.e P = [tex]\frac{F}{A}[/tex]
where P is the pressure, F is the force and A is the area.
The depth of the liquid determines its pressure at a definite lower point. As the pressure of a liquid at the bottom of a its container is greater than the pressure at the top of the liquid.
Thus,
P = σhg
where P is the pressure, σ is the density of the liquid, h is the height and g is the force of gravity.
It is measured in Pascals or N[tex]m^{-2}[/tex].
The pressure of liquid has a lot of applications, viz: siphon, force pump, lift pump etc.
When a tennis ball is spun around in a circle on a string and the string breaks the tennis ball
will be pulled in a curved path away from the center because of Centrifugal force
True or false
Answer:
False
whenever the string breaks, the ball will follow the straight line tangential path
Explanation:
No, the ball will not follow a curved path after the string breaks. Since, the the direction of velocity is tangential to each point of the circular motion. Therefore, it changes at every point. This produces an acceleration in the circle called centripetal acceleration. There is also a tangential component of acceleration acting on the ball during this motion.
So, whenever the string breaks, the ball will follow the straight line tangential path. Hence, the given statement is false.
What causes the magnetic field around the wire?
Magnetic field
O A. An electric current
O B. An electric field
PREVIOUS
An electric current causes the magnetic field around the wire. The correct answer is A.
The magnetic field around a wire is caused by the flow of electric current through the wire. When an electric current passes through a wire, it generates a magnetic field that forms circular lines of magnetic flux around the wire. This phenomenon is described by Ampere's law, which states that a magnetic field is produced by an electric current and its strength is directly proportional to the magnitude of the current.
The relationship between the electric current and the magnetic field can be understood using the right-hand rule. If you wrap your right hand around the wire with your thumb pointing in the direction of the current, the curled fingers indicate the direction of the magnetic field lines.
Therefore, an electric field is generated by an electric charge, not by an electric current. While an electric field can exist around a wire if there is a potential difference (voltage) applied across it, it is the flow of electric current that primarily generates the magnetic field.
To learn more about the electric field click:
brainly.com/question/8971780
#SPJ1
A cup of water plugged by a brown cork is insulated by a second styrofoam cup. A black rod and a thermometer are inserted through the cork into the water. The thermometer is A, the water is B, the outer cup is C. This part insulates the reaction chamber from the transfer of heat to or from the surrounding environment. This part contains a known amount of water, which is placed there before the experiment starts. This part is where the metal is placed at the beginning of the experiment. This part is used for measuring the initial and final temperatures of the water.
The part that insulates the reaction chamber from the transfer of heat to or from the surrounding environment is (C).
How to illustrate the information?It should be noted that the cup of water plugged by a brown cork is insulated by a second styrofoam cup.
In this case, the black rod and a thermometer are inserted through the cork into the water.
This part that contains a known amount of water, which is placed there before the experiment starts is (B).
This part is where the metal is placed at the beginning of the experiment is (B).
This part that is used for measuring the initial and final temperatures of the water is (A).
Learn more about water on:
https://brainly.com/question/5060579
#SPJ1
Answer:
Explanation:
C
B
B
A
Edge 2022
An object with mass 3.3 kg is executing simple harmonic motion, attached to a spring with spring constant 260 N/m . When the object is 0.017 m from its equilibrium position, it is moving with a speed of 0.40 m/s . Part A Calculate the amplitude of the motion. Express your answer to two significant figures and include the appropriate units.
Answer: the amplitude of the motion is 0.048 m
Explanation:
Given that;
mass m = 3.3 kg
spring constant k = 260 N/m
When the object is x = 0.017 m from its equilibrium position,
it is moving with a speed of v = 0.40 m/s
amplitude of the motion = ?
we know that;
formula for Potential of the string PE = 1/2kx²------1
Kinetic energy KE = 1/2mv² --------2
Now expression for the maximum potential energy of the spring is
PE_max = 1/2 kx²_max -----3
Now from conservation of Energy
PE_spring = PE + KE
from our equation 1, 2 and 3
1/2kx²_max = 1/2kx² + 1/2mv²
now we rearrange for x_max
x²_max = (1/2kx² + 1/2mv²) / 1/2k
x²_max = (kx² + mv²) / k
x_max = √ [(kx² + mv²) / k]
now we substitute our values into the equation
x_max = √ [(260(0.017)² + 3.3×(0.40)²) / 260]
= √((0.07514 + 0.528) / 260)
= √(0.60314 / 260)
= √ 0.002319
x_max = 0.048 m
Therefore the amplitude of the motion is 0.048 m
Starting at rest, A car accelerated to 20m/s in 4s. How far did the car travel as it sped up. Assume constant acceleration?
Answer:
40 m
Explanation:
displacement = 1/2 a t^2
= 1/2 ( 20/4) (4^2)
40 m
The terms transverse or longitudinal are often used to describe the types of pulses. To what feature of a pulse do these terms refer:____________
Explanation:
Transverse pulse or waves are those in which elements of the pulse move perpendicular to the propagation of the pulse. Whereas, Longitudinal waves are those in which elements of the wave are in same direction as the propagation of the wave. For example Light is a transverse pulse whereas sound is a longitudinal wave.
a 16-slug mass is raised by 10 ft. the PE of the mass increased by?
Answer:
The PE of the mass increased by 6,972.95 J
Explanation:
Gravitational Potential Energy
It's the energy stored in an object because of its vertical position or height in a gravitational field.
It can be calculated with the equation:
U=m.g.h
Where m is the mass of the object, h is the height with respect to a fixed reference, and g is the acceleration of gravity or 9.8 m/s^2.
We are given the mass of m=16 slug raised by a height h=10 ft. Both units will be converted to SI standard:
1 slug = 14.59 Kg, thus
16 slug = 16*14.59 Kg=233.44 Kg
1 ft = 0.3048 m, thus:
10 ft = 10*0.3048 m = 3.048 m
Thus, the PE of the mass increased by:
U = 233.44 * 9.8 * 3.048 = 6,972.95 J
the PE of the mass increased by 6,972.95 J
The potential energy will be "5120 ft.lb".
According to the question,
Mass,
m = 16 slugsHeight,
h = 10 ftAs we know the formula,
→ [tex]U = mgh[/tex]
By substituting the values, we get
→ [tex]= 16\times 32\times 10[/tex]
→ [tex]= 5120 \ ft.lb[/tex]
Thus the response above is correct.
Learn more:
https://brainly.com/question/13347447
As the temperature of a blackbody increases, what happens to the peak wavelength of the light it radiates
Answer:
The peak wavelength of the light it irradiates decreases
Explanation:
As the temperature of a blackbody increase, the peak wavelength of the light it radiates decreases, this follows Wien's Law.
A blackbody is an ideal substance that emits all frequencies of light and also has the ability to absorb them as well.
Wiens displacement law, explains that the position of the peak wavelength of the thermal radiation emitted by bodies can change with temperature, and as the temperature increases beyond a certain point, the wavelength begins to reduce. This often changes the colour of the light emitted from heated objects.
Answer:
The peak wavelength increases.
Explanation:
I just took the test this is correct.
Arvin, the ant, is on a picnic table. He travels 30 cm eastward, then 25 cm northward, and finally 15 cm westward. What is total distance traveled by Arvin?
Answer:
The total distance traveled by Arvin is 70 cm.
Explanation:
Distance and Displacement
A moving object constantly travels for some distance at defined periods of time. The total distance moved is the sum of each individual distance the object traveled. It can be written as:
dtotal=d1+d2+d3+...+dn
This sum is obtained independently of the direction the object moves.
The displacement only takes into consideration the initial and final points of the path defined by the object while it's moving. The displacement, unlike distance, is a vectorial magnitude and can be even zero if the object starts and ends the movement at the same point.
Arvin, the ant, moves 30 cm eastward, then 25 cm northward, and finally 15 cm westward. The total distance traveled is 30 cm+25 cm + 15 cm = 70 cm.
The total distance traveled by Arvin is 70 cm.