Answer:
The energy stored is [tex]E_s = 0.0064 \ J[/tex]
Explanation:
From the question we are told that
The capacitance is [tex]C = 8 \ \mu F = 8*10^{-6} \ F[/tex]
The resistance is R = 3.00-Ω
The emf is [tex]E_t = 70.0 V[/tex]
The power is P = 300 W
Generally the total emf is mathematically represented as
[tex]E_t = E_c + E_r[/tex]
Here [tex]E_c[/tex] is the emf across that capacitor which is mathematically represented as
[tex]E_c = \frac{q}{C}[/tex]
and [tex]E_r[/tex] is the emf across the resistor which is mathematically represented as
[tex]E_r = \sqrt{P R}[/tex]
So
[tex]E_t = \sqrt{PR} + \frac{q}{C}[/tex]
=> [tex]q = C[E_t - \sqrt{PR} ][/tex]
Generally the energy stored in a capacitor is mathematically represented as
[tex]E_s = \frac{q^2}{2C}[/tex]
=> [tex]E_s = \frac{[C [ E_t - \sqrt{PR} ]]^2}{2C}[/tex]
=> [tex]E_s = \frac{[8.0*10^{-6} [ 70 - \sqrt{300 * 3}}{2 *(8.0*10^{-6})}[/tex]
=> [tex]E_s = 0.0064 \ J[/tex]
The energy that has been stored in the capacitor will be 0.0064 J. The stored energy is utilized in the different electrical works.
What is a capacitor?A capacitor is a device that can store electrical energy. It is a two-conductor configuration separated by an insulating medium that carries charges of equal size and opposite sign.
An electric insulator or vacuum, such as glass, paper, air, or a semi-conductor termed a dielectric, can be used as the non-conductive zone.
The given data in the problem is;
C is the capacitance = 8.00-μF = 8.00 ×10 ⁻⁶
R is the resistance = 3.00-Ω
E is the emf = 70.0 V
P is the power = 300 W
The total emf is the sum of the emf due to the capacitor and emf due to the resistor;
[tex]\rm E_t = E_C + E_R[/tex]
The emf generated by the capacitor is;
[tex]\rm E_C = \frac{q}{C}[/tex]
[tex]\RM E_R = \sqrt{PR}[/tex]
[tex]\rm E_t = \frac{q}{C} + \sqrt{PR} \\\\ \rm q= C [ E_t-\sqrt{PR} ]\\\\[/tex]
Generally, the energy stored in the capacitor is;
[tex]\rm E_S= \frac{q^2}{2C} \\\\ \rm E_S= \frac{\rm C [ E_t-\sqrt{PR} ]\\\\^2}{2C} \\\\ \rm E_S= \frac{\rm 8.0 \times 10^{-6}[ 70-\sqrt{300\times 3} ]\\\\^2}{2 \times (8.0 \times 10^{-6}} \\\\ \rm E_S= 0.0064 \ J[/tex]
Hence the energy that has been stored in the capacitor will be 0.0064 J.
To learn more about the capacitor refer to the link;
https://brainly.com/question/14048432
15 points.
An object of mass 100 kg is observed to accelerate at a rate of 15
m/s/s. Calculate the force required to produce this acceleration.
Answer:
its 0.5 for all i beleive
Explanation:
which state can you infer that average home prices are the highest? Florida California Texas New York
Answer:
California
Explanation:
just took the test
The state you can infer where average home prices are the highest is California. Option B. This is further explained below.
What is an average home price?Generally, an average home price refers to a cumulative average to the house or home pricing in a state.
In conclusion, California has the highest average home prices highest in America.
Read more about House
https://brainly.com/question/1023637
#SPJ2
Any conclusion reached by analogy is worth accepting
True
False
A boat travels 28 m while it reduces its velocity from 27.5 m/s to 14.5m/s. What is the boat’s acceleration while it travels that distance?
Answer:
9.75 m/s²
Explanation:
Given that,
v= 14.5 m/s
u = 27.5 m/s
s = 28 m
a = ?
v² = u² -2as [ minus sign due to deceleration]
14.5² = 27.5² - 2 × a × 28
210.25 - 756.25 = -56a
-56a = -546
a = 9.75 m/s²
I NEED THIS ASAP!!
Which formula defines the unit for electrical power?
Answer:
1 W = 1 V x 1 A
Explanation:
Other dude is wrong this is right
A 50 kg person steps off a diving platform that is 10 meters above the water below (Olympic height). With what speed do they hit the water?
Answer:
14 m/s
Explanation:
The following data were obtained from the question:
Mass = 50 kg
Initial velocity (u) = 0 m/s
Height (h) = 10 m
Acceleration due to gravity (g) = 9.8 m/s²
Final velocity (v) =?
The velocity (v) with which the person hit the water can be obtained as shown below:
v² = u² + 2gh
v² = 0² + (2 × 9.8 × 10)
v² = 0 + 196
v² = 196
Take the square root of both side
v = √196
v = 14 m/s
Therefore, he will hit the water with a speed of 14 m/s
An object moves at constant speed in a circle. Which of the following is true:
A. A net force in the direction of motion acts on the object.
B. A net force pointing away from the center of the circle acts on the object.
C. A net force pointing towards the center of the circle acts on the object.
D. The net force acting on the object is zero.
If a car has a centripetal acceleration of 7m/s2 over a radius of 7m. How fast is it going
a. 7 m/s
b 1 m/s
с o m/s
d 49 m/s
Answer:
7 m/s (agrees with answer a in your list)
Explanation:
Recall that the centripetal acceleration is defined by the square of the tangential velocity divided by the radius of the rotational motion:
[tex]a_c=\frac{v_t^2}{R}[/tex]
then the tangential velocity is extracted from here as:
[tex]a_c=\frac{v_t^2}{R} \\v_t^2=a_c * R\\v_t=\sqrt{a_c * R}[/tex]
in our case, this becomes:
[tex]v_t=\sqrt{7*7} = 7 \,\,m/s[/tex]
A 20kg rock is sliding on a rough, horizontal surface at 8 m/s and eventually stops due to friction. the coefficient of kinetic friction between the rock and the surface is 0.200. what average power is produced by friction as the rock stops?
Answer:
156watts
Explanation:
M = 20
U = 0.200
Vo = 8.0
We are to get p
P = w/t
W = 1/2(vf²-Vo²)
The final velocity is 0
W =-1/2*20*8²
= -640J
Acceleration = -ug
= -0.200*9.8
= -1.96m/s^-2
We are to get t
t = 8/1.96
= 4.1s
P = w/t
= 640/4.1
= 156 watts
156watts is the average power that is produced by friction as the rock stops.
Staying with the dragster problem...two more... If the dragster did the amount of work you calculated in the previous problem in 4.38 seconds, how much power was generated in Watts?
Answer:
1,439,283.10Watts
Explanation:
The question looks incomplete. We need the workdone to get the power generated.
Power = Workdone/Time
Power = Force * Distance/Time
Let
Force = 24340 Newtons
Distance covered = 259meters
Given
Time = 4.38secs
Required
Power generated
Substitute the given parameters into the formula;
Power generated = 24340*259/4.38
Power generated = 6,304,060/4.38
Power generated = 1,439,283.10
Hence the amount of power generated is 1,439,283.10Watts
At a young age, who has the greatest influence on your choices?
Why do stretching exercises increase flexibility more than cardio exercises?
Answer:
Explanation:
No da esta aplicación y si para que usted vella
A mass of 100 g is tied to the end of an 80.0-cm string and swings in a vertical circle about a fixed center under the influence of gravity. The speed of the mass at the top of the swing is 3.50 m/s. What is the speed of the mass at the bottom of its swing?
Answer:
the speed of the mass at the bottom of its swing is 6.61m/s
Explanation:
Applying energy conservation
[tex]\frac{1}{2}m(Vlowest)^2 = mg(2R) + \frac{1}{2}m(Vtop)^2[/tex]
There is no potential energy at the bottom as the body will have a kinetic energy there.
h= 2R = 1.6m as the diameter of the circle will represent the height in the circle.
g = 9.8m/s^2
m will cancel out, so the net equation becomes.
[tex]\frac{(Vbottom)^2}{2} = 2gR + \frac{(Vtop)^2}{2}[/tex]
= [tex]2*9.8*0.8 + \frac{(3.5)^2}{2}[/tex]
= 15.68+ 6.125
[tex]\frac{(Vbottom)^2 }{2}[/tex] = 21.805
(Vb)^2 = 2*21.805
= 43.64
Vb = 6.61m/s
A marble is rolling off the edge of a table is observed to hit the floor 0.77 m from the table. If the top is 0.86 m high, how fast was the marble traveling when it left the table?
A.) 0.2 m/s
B.) 0.4 m/s
C.) 1.8 m/s
D.) 1.6 m/s
Answer:
B 0.4 have a nice day and hiiii
Use the drop-down menus to complete each sentence.
A plant grows toward a sunny window. This response is an example of
✔ phototropism
.
Sometimes a plant grows around a tree for support. This response is an example of
✔ thigmotropism
.
The roots of a plant grow toward a water source. This response is an example of
✔ hydrotropism
.
The roots of a plant grow down into the soil. This response is an example of
✔ gravitropism
.
the answers are already there
Answer:
The correct answer is - phototropism, thigmotropism, hydrotropism, and gravitropism in order ( already match correctly).
Explanation:
phototropism is a phenomenon in which plants grow towards the light or sun which is accomplished by the hormone auxin in the cells far from the light.
Thigotropism is a type of plant growth that occurs around the tree to support itself which is a touch stimuli response.
The movement of the plant in the direction of the source of the water is known as hydrotropism. In which stimuli is humidity or the water concentration.
The movement of the plant or roots of the plants towards the soil or earth is known as gravitropism here gravity is the stimuli.
Answer:
Use the drop-down menus to complete each sentence.
A plant grows toward a sunny window. This response is an example of
phototropism
.
Sometimes a plant grows around a tree for support. This response is an example of
thigmotropism
.
The roots of a plant grow toward a water source. This response is an example of
hydrotropism
.
The roots of a plant grow down into the soil. This response is an example of
gravitropism
.
Explanation:
how long does the guided discovery stage of the drawing in phase last? in training program
Answer:
2 to 3 weeks
Explanation:
A spring-loaded toy gun is used to shoot a ball straight up inthe air. The ball reaches a maximum height H, measuredfrom the equilibrium position of the spring. The same ball is shot straight up a second time from the same gun, but this time the spring is compressed only half as far before firing. How far up does the ball go this time?
Answer:
H' = H/4
Explanation:
By applying the law of conservation of energy to this problem, we know that:
Elastic Potential Energy Stored by Spring = Gravitational Potential Energy of ball
(1/2)kx² = mgH
H = (1/2)kx²/mg -------------- equation (1)
where,
H = Height reached by the ball
x = compression of spring
k = stiffness of spring
m = mass of ball
g = acceleration due to gravity
Now, if we make the compression to half of its value:
x' = x/2
then:
H' = (1/2)k(x/2)²/mg
H' = (1/4)(1/2)kx²/mg
using equation (1), we get:
H' = H/4
You are riding a bicycle. If you apply a forward force of 125 N, and you and
the bicycle have a combined mass of 82 kg, what will be the forward
acceleration of the bicycle? (Assume there is no friction.)
I WILL GIVE YOU POINTs
Answer:
1.52g
Explanation:
Given parameters:
Force = 125N
Mass combined = 82kg
Unknown:
Acceleration of the bicycle = ?
Solution:
From Newton second law of motion suggests that:
Force = mass x acceleration
Acceleration = [tex]\frac{force}{mass}[/tex] = [tex]\frac{125}{82}[/tex] = 1.52g
Answer:
The answer that was correct for me was A. 55 N pulling left, and 16 N, 17N p
pulling Right
Explanation:
A gas has 4.99*10^27 molecules. How many moles is that?
Answer: 8280
Explanation: This is the answer that my online school curriculum said was right.
God loves you!!!
Answer:
This isn't an answer, but rather a question for the answer that was given (which was correct! Thank you so much!) I was trying to figure out how to comment because I am in no way trying to steal points or anything like that, but I have a genuine question that I couldn't figure out any other way to ask...
How did you come up with 8280? Whenever I do it I get 8289....
I would like to know the process for future reference. Thank you for your help and again, I apologize for taking these points with no answer to contribute.
Which of the following is NOT a type of variable?
A. Burette
B. Ordered
C. Continuous
D. Categoric
Answer:
A
Explanation:
because its not trust me :)
Which term refers to the ability to do work?
o energy
power
force
motion
PLEAEE HURRY IM DOING MY EXAM PLEASE HELP WILL MARK BRAINLIEST
Answer:
Energy
Explanation:
work is actually a transfer of energy. When work is done to an object , energy is transferred to that object.
The ability to do work is called energy.
What is work ?"Work is the energy transferred to or from an object via the application of force along a displacement. In its simplest form, it is often represented as the product of force and displacement."
What is energy ?"Energy is defined as the “ability to do work, which is the ability to exert a force causing displacement of an object.” energy is just the force that causes things to move. Energy is divided into two types: potential and kinetic."
Know more about energy here
https://brainly.com/question/1932868
#SPJ2
what can i yeet baby or toddler
Answer:
both
Explanation:
baby for fun, toddler for vengence
Objects falling through air are slowed by the force of air resistance. Which objects were slowed the most by air resistance?
Answer:
This question is incomplete
Explanation:
This question is incomplete. However, it should be noted that when objects of different sizes fall in absence of air resistance, the objects will get to the ground at the same time. But with the presence of air resistance, the heaviest object gets to the ground first; meaning it has the least air resistance while the lightest object will arrive at the ground last because it has the greatest air resistance and is slowed down the most by the air resistance.
Thus, the lightest object in the completed question is the answer.
A 37.0-kg child swings in a swing supported by two chains, each 3.06 m long. The tension in each chain at the lowest point is 410 N. (a) Find the child's speed at the lowest point.______m/s (b) Find the force exerted by the seat on the child at the lowest point. (Ignore the mass of the seat.)_______ N(upword)
Answer:
1. 6.15m/s
2. 820N
Explanation:
The total upward force
= 410x2
= 820
g = 9.81
a = v²/r
= 2xT - msg = m x v²/r
= 820-37*9.81 = 37v²/3.06
= 820-362.97 = 37v²/3.06
= 457.03 = 12.09v²
To get v²
V² = 457.03/12.09
V² = 37.8
V = √37.8
V = 6.15m/s
B. We already have the answer to this question
The force exerted is simply gotten by this calculation
2x410
= 820N
Experiment: Gravity
Potential Energy = Force x Distance
To show you how this works, study the following example.
If the washers had a mass of 2 grams, and since the force due to gravity in the metric system is 9.8 m/sec2, the weight would be:
W = mass (kg) x gravity
W = 0.002 kg x 9.8 = 0.0196 Newton's. The Newton (N) is the measure of force (or weight here) in the metric system.
The next phase of the computation is to determine the difference in potential energy between where the washers originally started from and the energy of the new position. If the washers were originally 1 meter from the floor or desktop, and the magnet raised them 1 centimeter, the difference in distance raised will be 1 cm, or 0.01 m. Therefore, the potential energy change will be:
Force x Distance = Potential Energy
(0.0196 N) x (0.01 m) = 0.000196 Nm (or Joules)
The magnet is changing the potential energy of the washers by 0.000196 J, or in scientific notation:
1.96 x 10-4 J.
Answer: the washer would slow down depending on how strong the magnet is even though the gravitational pull is the same. the change would be .6
Explanation: i don't really get it
If a penny is dropped from rest from a building takes 2 seconds to hit the ground, calculate the velocity of the penny right before it touches the ground?
a. 19.6 m/s
b 9.8 m/s
c. 0 m/s
d 29.4 m/s
Answer:
20m/s
Explanation:
u = 0m/s
t = 2s
a = +g = 10m/s²
t = 2d
v = ?
v = ut + 1/2at²
v = 0(2) + 1/2(10)(2)²
v = 0 + 5(4)
v = 20m/s
Please help me! Will give brainliest.
Answer:
B. Boats need to float.
Can someone help me with my physics
A pendulum is a body that is suspended from a fixed point so that it can swing back and forth through an exchange of kinetic energy and gravitational potential energy. Using 1–2 sentences, explain what happens to the kinetic energy and gravitational potential energy of the pendulum at the highest point and at the lowest point of its swing.
Answer:
Because mechanical energy (the sum of potential and kinetic energy) is conserved, as the kinetic energy increases, the potential energy decreases. The maximum kinetic energy is achieved when the pendulum passes through the lowest point, and the maximum potential energy is achieved at the highest point.
A film of soapy water on top of a plastic cutting board has a thickness of 255 nm. What wavelength and color is most strongly reflected if it is illuminated perpendicular to its surface?
Answer:
the reflected wavelength is lano = 4.55 10⁻⁷ m which corresponds to the blue color
Explanation:
This is a case of reflection interference, we must be careful
* There is a 180º phase change when light passes from the air to the soap film (n = 1,339), but there is no phase change when passing from the pomp to the plastic (n = 1.3)
* the wavelength within the film is modulated by the refractive index
λₙ = λ₀ / n
if we consider these relationships the condition for constructive interference is
2 t = (m + ½) λₙ
2t = (m + ½) λ₀ / n
λ₀ = 2t n / (m + ½)
we substitute the values
λ₀= 2 255 10⁻⁹ 1,339 / (m + ½)
λ₀ = 6.829 10⁻⁷ (m + ½)
let's calculate the wavelength for various interference orders
m = 0
λ₀ = 6.829 10⁻⁷/ ( 0 + ½ )
λ₀ = 13.6 10⁻⁷
it is not visible
m = 1
λ₀ = 6,829 10⁻⁷/ (1 + ½)
λ₀ = 4.55 10⁻⁷
color blue
m = 2
λ₀ = 6.829 10⁻⁷ / (2 + ½)
λ₀ = 2,7 10⁻⁷
it is not visible
therefore the reflected wavelength is lano = 4.55 10⁻⁷ m which corresponds to the blue color
A satellite was in two separate crashes. In both crashes, the satellite had the same mass. Engineers want to know about the speed and direction of the satellite after the crashes. Why would the crash affect the motion of the satellite, and which crash caused a greater change in motion for the satellite?
WILL GIVE BRAINLIEST
Answer:
The fastest satellite must change orbit
The most massive body (m₁) transfers more momentum to the satellite,
Explanation:
For this problem we consider a system formed by the satellite and each of the bodies with which it collides, in this system the forces during the collision are internal, the amount of movement must be conserved. Let's write the momentum is two instants
Most massive body (m1)
initial. Before the crash
p₀₁ = M v + m₁ v₁
after the crash
[tex]p_{f1}[/tex] = M v´ + m₁ v₁´
how momentum is conserved
p₀ = p_{f}
Lighter body (m2)
p₀₂ = M v + m₂ v₂
p_{f2} = M v´ + m₂ v₂´
Let's clarify that the speed of the satellite and the object do not have the same direction, in general these shocks are elastic.
We can see that p₀₁> p₀₂
Let us analyze the two cases when the body collides, The most massive body (m₁) transfers more momentum to the satellite, therefore there must be a greater change in its momentum and velocity.
The fastest satellite must change orbit, thus rotating at a different distance from Earth
the force of attraction between any two objects that have mass is
Answer:
gravitational force
Explanation:
Gravitational force -an attractive force that exists between all objects with mass; an object with mass attracts another object with mass; the magnitude of the force is directly proportional to the masses of the two objects and inversely proportional to the square of the distance between the two objects