Answer:
25N
Explanation:
The force calculated to be 25kgm/s² has a value of 25N.
To solve this problem, we need to consider the unit of force. The unit of force is expressed in N, newtons.
To find force;
Force = mass x acceleration
Unit of mass = kg
acceleration = m/s²
So;
1N = 1kgm/s²
Therefore 25kgm/s² is the same as 25N
Use what you have learned about the types of energy that travel from the Sun to Earth to match each term with its description.
Infrared Radiation
Ultraviolet Radiation
Radiation
Electromagnetic Waves
Visible Light
How Sun’s energy travels to Earth
Causes skin cancer and sunburn
Made of colors that the eye can see
Takes the form of heat
Transfer of energy from Sun
The type of energy is given as under :
How Sun’s energy travels to Earth - Electromagnetic WavesCauses skin cancer and sunburn - Ultraviolet RadiationMade of colors that the eye can see - Visible LightTakes the form of heat - Infrared RadiationTransfer of energy from Sun - Radiation.How is the tranfer of energy form sun to earth ?The sun transfers energy to the earth in the form of electromagnetic waves and the warm up the earth's upper air.
Some of the radiation that enters the earth get absorbed by the land surface. The sun is ths responcible for the energy distribution.
The visible light is part of wavelength that carries colors the human eyes can see. The infrared is the range that transfers the heat from the sun.
Find out more information about the Earth.
brainly.com/question/25624188
A compound is a pure substance made up of two or more different atoms joined by chemical bonds. Consider the composition of the air in Earth’s atmosphere. Which of the components of air is a compound? (Hint: refer back to your elements notes) How do you know?
Answer:
Carbon dioxide is a compound
Explanation:
It is formed by chemical combination of carbon and oxygen atoms
Where are electrons located? (Use the correct term not just the location(
Answer: electrons are found outside the nucleus.
Explanation:
what are the uses of glycerin?
Explanation:
This medication is used as a moisturizer to treat or prevent dry, rough, scaly, itchy skin and minor skin irritations (e.g., diaper rash, skin burns from radiation therapy). Emollients are substances that soften and moisturize the skin and decrease itching and flaking.
Use the periodic table to identify the element represented by each of the following electron configurations.
Answer:
[He]2s^2: Be
[Ne]3s^23p^5: Cl (thats an L, not an i)
[Xe]6s^1: Cs
[Ar]4s^23d^9: Cu
SO IN ORDER IF YOU DONT WANNA READ ALL THAT
Be
CL
Cs
Cu
Explanation: Edge :)
Answer:1 Be 2 CL 3 Cs 4 Cu
Explanation:
Which statement describes the components of a mixture?
1.
Each component gains new properties.
2.
Each component loses its original properties.
3.
The proportions of components can vary.
4.
The proportions of components cannot vary.
Answer: 3
Answer: The proportions of components can vary.
Explanation:
A mixture is a combination that has to do with two or more substances. Some characteristics or properties of mixtures are that the substances that are added together retain their properties.
Also, the proportion of the components can vary and the components can be separated.
Therefore, the answer to the question will be option 3 "The proportions of components can vary".
need answer to this question asap. it is worth 10 points
the molar ratio of carbon to hydrogen of a volatile liquid compound is 1.2:0.12 of the liquid. on evaporation at s.t.p gave 32cm3 of vapour. what is the molecular formula of the liquid
The molecular formula of the liquid : C₆H₁₂
Further explanationGiven
molar ratio C H = 1.2 : 0.12
0.12 g at STP gave 32 cm³(0.032 L)
Required
The molecular formula
Solution
At STP, 1 mol = 22.4 L, so for 0.032 L :
mol = 0.032 : 22.4
mol = 0.00143
Molar mass (M) of liquid :
M = mass : mol
M = 0.12 g : 0.00143 mol
M = 83.92≈84 g/mol
C : H = 1 : 2
(CH₂)n=84
(12+2.1)n=84
(14)n=84
n=6
(CH₂)₆=C₆H₁₂
What is “the process in which electrons are rearranged without direct contact”???
Answer:
Induction
Explanation:
When a body is brought in contact with another, electrons are rearranged by contact.
When a body is rubbed against one another, charging by friction occurs.
The process whereby electrons are rearranged without direct contact with one another is called induction.
By induction electrons can get charged without them having to be in contact with one another.
When a charged body is brought to the vicinity of the electrons, either an attraction or repulsion force is set up. Similar charges causes repulsion If a negatively charged body is brought near the electrons, there would be heavy repulsion and the electrons would be forced to rearranged. This effect is product as a result of a force field.An atom of sodium can transfer its one valence electron to an atom of...
O magnesium to complete the octet rule
O fluorine to complete the octet rule
O nitrogen to complete the octet rule
O calcium to complete the octet rule
Answer: Either give off or gain electrons to make a total of 8
What is the source of the ions involved in a redox reaction that occurs in an electrochemical cell?
Answer:
D. Electrodes
Explanation:
A redox reaction is defined as the reaction in which both oxidation and reduction reactions take place and electrons are transferred from oxidized substance to the substance that is being reduced.
An electrochemical cell is consist of electrodes (anode and cathode), electrolyte solution, salt bridge, and conducing wire. An electrochemical cell undergoes redox reaction that produces an electric current due to the movement of ions through electrodes. Electrodes are the source of ions, as anode electrode undergoes oxidation reaction and releases electrons or ions and cathode, gains electrons through reduction reaction.
Hence, the correct answer is "D. Electrodes".
A sample of methane gas (CH4 (g)) having a volume of 2.8 L at 25oC and 1.65 atm was mixed with a sample of oxygen gas having a volume of 35 L at 31oC and 1.25 atm. The mixture was then ignited to form carbon dioxide and water. Calculate the volume of CO2 formed at a pressure of 2.5 atm and a temperature of 125oC.
Answer:
2.47 L
Explanation:
The first thing we do is to write the balanced equation, which is.
CH4(g) + 2O2(g) --> CO2(g) + 2H2O(g)
Now, using ideal gas equation, we see that
PV = nRT
moles of methane
where P is the pressure, 1.65 atm
V is the volume, 2.8 L
R is the ideal gas constant, 0.0821
T is the temperature in Kelvin, 25 + 273 = 298 K
n = PV/RT
n of methane = 1.65 * 2.8 / 0.0821 * 298
n of methane = 4.62 / 24.47
n of methane = 0.189 mole
moles of O2:
PV = nRT
where P is the pressure 1.25 atm
V is the volume, 35 L
R is the ideal gas constant, 0.0821 L
T is the temperature, 31 + 273 = 304 K
n of O2 = 1.25 * 35 / 0.0821 * 304
n of O2 = 43.75 / 24.96
n of O2 = 1.75 mol
from the equation, the molar ratio between O2 and CH4 is 2:1, so therefore
no of moles of O2 = 2 * .0189 moles of methane = 0.378 mole
when 1 mole of CH4 --> 1 mole of CO2
1 mol of CO2 --> 22.4 L CO2
volume of CO2 at STP = [(0.189 moles of CH4 /1) * (1 mol of CO2)] / [(1 mole CH4) * (22.4L CO2)/(1 mol of CO2)] = 4.23 L
Next, we use the formula
P1V1 /T1 = P2V2/T2
where
P1 = 1 atm
V1 = 4.23 L
T1 = 273
P2 = 2.5 atm
T2 = 125 + 273 = 398 K, making V2 subject of formula, we have
V2 = P1V1T2 / T1P2
V2 = 1 atm * 4.23 L * 398 / 273 * 2.5 atm
V2 = 1683.54 / 682.5
V2 = 2.47 L
*HELP ASAP PLEASE !!*
What effect does the value for 20°C in trial 3 have on the data's measures of
central tendency?
A. The median will be lower than the mean and mode.
B. The mean will be lower than the median and mode.
C. The median will be higher than the mean and mode.
O
D. The mean will be higher than the median and mode.
Answer:
D
Explanation:
I look the quiz
Answer:
Its The mean will be higher than the median and mode.
Explanation:
I took the quiz, be careful because some times the answers are in other order.
A substance is found to have a density of 2.4 g/ml and weighs about 100g. What is its volume?
Answer:
41.67 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question we have
[tex]density = \frac{100}{2.4} \\ = 41.66666...[/tex]
We have the final answer as
41.67 mLHope this helps you
A chemical reaction is shown below. Fe +H,0 – Fe 0,+H What are the products in the equation? A FeO, only B Fe only C Fe and H2O D Fe 0, and H
What effect does altitude have on climate?
Answer:
Locations at a higher altitude have colder temperatures
Explanation:
brainliest please
According to this Bohr model, in what period would this element be found?
Answer:
yes
Explanation:
yes
What is the Name of the Covalent Compound, Se3P4?
Answer:
For example, the compound FeSO4 is called iron(II) sulfate, because it contains Fe2+.
Explanation:
please mark me as brainliest thank you
When we add friction into the skate park what happens to the skater? Skate park questions
Answer:
If you put friction in to skating rink then obvioulsy the skaters wont be able to glide and skate.
Explanation:
friction is power that disturbes the moving power. places like skating rink and slides try to have the least amount of friction.
Seeds are often found on which part of a gymnosperm?
O branch
O leaf
O cone
O stem
Answer:
I believe the answer is b
1 mole = 6.02 x 10^23 molecules. 1 mole= 22.4 L How many liters does 5.0 x 10^24 molecules occupy? .37 L 1.3 x10^49 L 190L or 6.7 x 10^49
Answer:
185.92 L
Explanation:
Given data:
1 mole = 6.022× 10²³ molecules
1 mole = 22.4 L
Volume occupy by 5.0× 10²⁴ molecules
Solution:
1 mole = 6.022× 10²³ molecules
5.0× 10²⁴ molecules × 1 mole / 6.022× 10²³ molecules
0.83× 10¹ mol
8.3 moles
1 mole occupy 22.4 L
8.3 mol × 22.4 L / 1 mol
185.92 L
Organs that work to remove waste products are___.
A. Lungs
B. Kidneys
C. Liver
D. Skin
Answer:
Excretion is the process of removing wastes from the body. Organs of the excretory system include the kidneys, large intestine, skin, and lungs.
The excretory system removes metabolic wastes from the body. The major organs of excretion are the kidneys, a pair of bean-shaped organs located below the liver. The kidneys filter blood and regulate water balance in the body
What is the ion symbol for Lithium?
Answer:
Lithium is an alkali metal. The symbol for lithium element is ‘Li’. It belongs to group 1 of periodic table. Its electronic configuration is 1s2 2s1. It has one valence electron. So it loses one electron to attain stable configuration. Hence the symbol for lithium ion is ‘Li+’.
Explanation:
ithium is a chemical element with the symbol Li and atomic number 3. It is a soft, silvery-white alkali metal. Under standard conditions, it is the lightest metal and the lightest solid element. Like all alkali metals, lithium is highly reactive and flammable, and must be stored in mineral oil. When cut, it exhibits a metallic luster, but moist air corrodes it quickly to a dull silvery gray, then black tarnish. It never occurs freely in nature, but only in compounds, such as pegmatitic minerals, which were once the main source of lithium. Due to its solubility as an ion, it is present in ocean water and is commonly obtained from brines. Lithium metal is isolated electrolytically from a mixture of lithium chloride and potassium chloride.
# of molecules/atoms in each (show your work)
a. 0.572 moles of Al
b. 1.45x10² moles of SO2
c. 6.25 moles of Ca (OH)2
d. 0.0024 moles of CO2
Answer:
3.44× 10²³ atoms
8.73× 10²⁵ molecules
37.64 × 10²³ molecules
0.014 × 10²³ molecules
Explanation:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.
The number 6.022 × 10²³ is called Avogadro number.
For example,
18 g of water = 1 mole = 6.022 × 10²³ molecules of water
1.008 g of hydrogen = 1 mole = 6.022 × 10²³ atoms of hydrogen
a) 0.572 moles of Al:
1 mole = 6.022 × 10²³ atoms
0.572 mol × 6.022 × 10²³ atoms / 1 mol
3.44× 10²³ atoms
b) 1.45× 10² moles of SO₂:
1 mole = 6.022 × 10²³ molecules
1.45 mol × 10² × 6.022 × 10²³ molecules / 1 mol
8.73× 10²⁵ molecules
c) 6.25 moles of Ca(OH)₂
1 mole = 6.022 × 10²³ molecules
6.25 mol × 6.022 × 10²³ molecules / 1 mol
37.64 × 10²³ molecules
d) 0.0024 moles of CO₂
1 mole = 6.022 × 10²³ molecules
0.0024 mol × 6.022 × 10²³ molecules / 1 mol
0.014 × 10²³ molecules
Winter is coming and it's time to make sure you have the right amount of antifreeze
in your car. The best mixture of antifreeze and water is 50% antifreeze with 50%
water. The cooling system in your car has a mixture of 6.00 L water with 6.00 L of
ethylene glycol (antifreeze).
What is the molality of that solution?
The chemical formula for ethylene glycol is C2H602 and its density is 1.1132 g/cm3. (
Hint- use the density to find the mass of 6.0 L of C2H6O2, and remember that 1.0cm3
= 1.0 mL and that 1.0 L of water = 1.0 kg)
The molality of the solution = 17.93 m
Further explanationGiven
6.00 L water with 6.00 L of ethylene glycol(ρ=1.1132 g/cm³= 1.1132 kg/L)
Required
The molality
Solution
molality = mol of solute/ 1 kg solvent
mol of solute = mol of ethylene glycol
mass of ethylene glycol := volume x density
= 6 L x 1.1132 kg/L
= 6.6792 kg
= 6679.2 g
mol of ethylene glycol (MW=62.07 g/mol)=mass : MW
=6679.2 : 62.07
=107.608
mass of water6 L water = 6 kg water(ρ= 1 kg/L)
molality[tex]\tt =\dfrac{107.608}{6}=17.93~m[/tex]
What does the image below represent?
Answer:
I think it's the electron dot structure for oxygen
which one of the following is different from the others A .HCl B. HF C. HBr D. HI
Answer:
D.HI
Explanation:
because this is the most different
When a hydrate is heated to high temperatures, what is generally the product?
Answer:
anhydrous compound
Heating a hydrate leads to an endothermic reaction that produces a residue known as the anhydrous compound. This compound is different in structure, texture and even color in some cases, from its parent hydrate.
Warming a hydrate prompts an endothermic response that creates a buildup known as the anhydrous compound. This compound is distinctive in structure, surface and even shading now and again, from its parent hydrate.
Explain why liquid freshwater is considered a limited resource.
Answer:
Freshwater is such a limited resource because there is such a little amount of freshwater found on Earth. About 77% of fresh water on Earth is frozen in glaciers and polar ice caps. Because of this, there is very little fresh water available for humans to use.
Explanation: Hope this helps.
Freshwater is a scarce resource, making up just around 3% of the total amount of water on Earth. Although freshwater is regarded as a renewable resource, certain areas utilize more freshwater than can be replaced by natural processes.
There is a very small amount of fresh water on Earth, making it a scarce resource. The polar ice caps and glaciers contain around 77% of the fresh water on Earth. This results in a relatively limited supply of fresh water for human use.
Since freshwater only accounts for around 3% of the total amount of water on Earth, it is a limited resource.
Learn more about freshwater, here:
https://brainly.com/question/17443499
#SPJ2
Made up of the protons and neutrons, this part or the atom contains nearly all the mass of the atom
Answer:
The nucleus
Explanation:
4. There is water inside your water bottle. Identify the solid.
Answer: the water bottle
Explanation:
yuh
One of the basic states of matter, described as having a distinct shape, size, and organized structure, is solid. The constituent particles of solids have fixed positions and oscillate around their mean positions. Solids also have distinct borders. Here the solid is a water bottle.
The atoms and molecules in a solid are so tightly bound together that they vibrate in situ rather than moving. Liquids have a fixed volume but can flow to change their shape. Atoms and molecules are only weakly bound together in liquids.
In the water bottle, a solid is a water bottle and water is a liquid. Solids' molecules continue to be tightly packed. Solids' molecules don't move about freely in all directions; instead, they stay stationary.
To know more about solid, visit;
https://brainly.com/question/33643546
#SPJ6