A______,in which one event follows another, is a staple of human storytelling.
(1 point)
O fable
O nonlinear story
O linear story
O comedy

Answer: 2

Explanation:

Answer:

year = 1776

if year >= 2101:

   print("Distant future")

elif year >= 2001:

   print("20th century")

else:

   print("Long ago")

Explanation:

Alternatively, if you wanted the user to assign a value to the "year" variable. You could replace year = 1776 with year = int(input("Enter a year: "))

In the United States, an LLC is a type of organizational structure where the owners are not held personally responsible for the debts or obligations of the business. Limited liability companies are hybrid legal entities with traits shared by corporations, partnerships, and sole proprietorship.

A business where some people hold the bulk of the company's shares is known as a closely held corporation. Shares cannot be purchased by the public because they are not openly traded on an exchange. The majority shareholders have a large impact on and control over the company.

Therefore, The simplest and most straightforward type of business ownership is a sole proprietorship. One individual is the owner of it. The distinction between the individual and the company does not exist. Profits and losses from the company are shared by the owner.

Learn more about personally liable here:

https://brainly.com/question/14682274

#SPJ1

Since there was an online ranking of all the students in your grade from most attractive to least attractive, my response will be that it is unethical.

That some student whose name may be in the lowest point can see it and be sad as well as laugh at which may make them to have low self esteem and can even make them to stop going to school so that they would not be laugh at and as such, such things should be removed as the cons are more that the pros.

Unethical behavior is known to be a term that can be defined as any kind of actions that are known to be done against social norms.

Note that they can be seen as any kind of acts that are found to be unacceptable to the public.

Therefore, Since there was an online ranking of all the students in your grade from most attractive to least attractive, my response will be that it is unethical. That some student whose name may be in the lowest point can see it and be sad as well as laugh at which may make them to have low self esteem and can even make them to stop going to school so that they would not be laugh at and as such, such things should be removed as the cons are more that the pros.

Learn more about Unethical behavior from

https://brainly.com/question/24518056

#SPJ1

The guessing-game program that the user thinks of a number that the computer must guess is illustrated below.

The appropriate program for the guessing game will be:

import random

import math

smaller = int(input("Enter the smaller number: "))

larger = int(input("Enter the larger number: "))

count = 0

print()

while True:

   count += 1

   myNumber = (smaller + larger) // 2

   print('%d %d' % (smaller, larger))

   print('Your number is %d' % myNumber)

   choice = input('Enter =, <, or >: ')

   if choice == '=':

       print("Hooray, I've got it in %d tries" % count)

       break

   elif smaller == larger:

       print("I'm out of guesses, and you cheated")

       break

   elif choice == '<':

       larger = myNumber - 1

   else:

       smaller = myNumber + 1

Learn more about programs on:

https://brainly.com/question/16397886

#SPJ1

The time to  use Object-oriented design methodology is when a person wants to fill the space between problem and solution.

Check more about Object-oriented design methodology  below:

The term Object-oriented design (OOD) is known to be a kind of an act or method that involves the use of   an object-oriented methodology to design a computing system or any form of application.

Note that this technique is known to be one that entails the act of the implementation of a software solution which is said to be as a result of an idea or the concepts of objects, since OOD serves as an aspect of the object-oriented programming (OOP) act or lifecycle.

Therefore, based on the above, one can say that The time to  use Object-oriented design methodology is when a person wants to fill the space between problem and solution.

Learn more about Object-oriented design from

https://brainly.com/question/13383471
#SPJ1

In +MakeCode Arcade, the space where you drag code blocks to build your program is called the workspace. The correct option is C.

Microsoft MakeCode Arcade is a beginner-friendly web-based code editor for creating retro arcade games for the web and dedicated hardware.

As is customary with MakeCode, you can build your program in your browser using blocks or JavaScript.

JavaScript and the Static TypeScript language are used in the Microsoft MakeCode programming environment.

The workspace is the area in MakeCode Arcade where you drag code blocks to build your program.

Thus, the correct option is C.

For more details regarding MakeCode Arcade, visit:

https://brainly.com/question/28144559

#SPJ1

Your question seems incomplete, the missing options are:

A. Game simulator

B. Image editor

C. Workspace

D. Toolbox

Answer: To stop terrorist

Explanation: After the attack on 9/11 the Department Homeland Security was created to stop terrorist. :)

The new jobs that could be created to help address the reality of climate change are:

The term climate change is known to be a Long-term changes in temperature and weather patterns are referred to as climate change. These changes could be caused by natural processes, such oscillations in the solar cycle.

Note that human activities are known to be primarily the combustion of fossil fuels like coal, oil, and others are those that have been the primary cause of climate change.

Therefore, The new jobs that could be created to help address the reality of climate change are:

Learn more about climate change from

https://brainly.com/question/1789619
#SPJ1

The output for the first condition would be thanks while the one when age is not 17 or 18 would be error please try again.

This is the statement that is used in programming which tells the computer to fulfill another condition if the first condition that it was given is unmet.

Here the first condition is to type 17 or 18 as age.

This would be

If Age == "17" or "18"

print ("thanks")

The output would be thanks if the age falls under the condition of 17 or 18.

Next we are to get what happens if age is not 17 or 18

elif age != "17" or "18"

print("Error please try again")

The output that we would have here if the first condition is unfulfilled would be error try again.

Read more on elif codes here: https://brainly.com/question/15091482

#SPJ1

A User account protects your device against unauthorized access.

A user account is known to be a kind of online account that gives one room or does not allow a user to be linked to a network, another computer, or any other thing.

Note that any network that has multiple users requires one to have user accounts and as such, A User account protects your device against unauthorized access.

Learn more about User account from

https://brainly.com/question/26181559

#SPJ1

A microchip is used in almost every electronic gadget we use today, including cellphones, game consoles, automobiles, as well as in medical equipment, and they all uses microchips.

A microchip is a discrete piece of packaged computer circuitry, also known as an integrated circuit, that is produced on a very small scale from a material like silicon. Program logic (logic or microprocessor chips) and computer memory are produced using microchips (memory or RAM chips).

Therefore, based on the above, A microchip is used in almost every electronic gadget we use today, including cellphones, game consoles, automobiles, as well as in medical equipment, and they all uses microchips.

Learn more about microchip from

https://brainly.com/question/28469339
#SPJ1

It is true that all office programs include the capability to incorporate feedback called online collaboration across the internet or a company network.

The process of connecting users digitally to communicate in an online space is known as online collaboration. A software system that allows team members to communicate using video, audio, and text is usually used to supplement online collaboration.

It is primarily used by businesses to improve communication and project efficiency.

All Office programs include the ability to incorporate feedback via the internet or a company network, which is known as online collaboration.

Thus, the given statement is true.

For more details regarding online collaboration, visit:

https://brainly.com/question/19191600

#SPJ1

The type of addresses that do not change if you copy them to a different cell is Absolute references.

There are known to be two types of cell references which are: relative and absolute.

Note that Relative and absolute references can work differently if copied and filled to other cells. The Absolute references, is one that often remain constant, no matter where a person may have copied them to.

Therefore, The type of addresses that do not change if you copy them to a different cell is Absolute references.

Learn more about Absolute references from

https://brainly.com/question/11764922

#SPJ1

The "Theme" command is NOT a picture format command.  (Option B)

The other options listed – "Remove background," "Crop," and "Arrange" – are picture format commands that are typically found in image editing or presentation software.

"Theme" is usually related to the overall design style or appearance of a document or presentation, rather than a specific picture format manipulation.

It's important to note that your provided context is slightly unclear, and without additional details, this answer is based on common understanding of these terms in the context of image editing or presentation software.

Learn more about picture format  at:

https://brainly.com/question/32510553

#SPJ2

decimal places for data is false

Answer:

  D. Using the top ladder as a step

Explanation:

You are given suggestions for use of a ladder, and asked to identify one that is unsafe.

In general, you will want to make sure a ladder is locked so that movable parts cannot move, and placed on a stable, level surface at an appropriate angle. It can be helpful to have someone hold the ladder for you to make sure it does not move. It is always a good idea to face the ladder while climbing up and down, so that you can appropriately grip the rails.

The one practice listed here that is unsafe is using the top step of the ladder.

Answer: Its D

Explanation:

Maintaining three points of contact with the ladder at all times

Never standing on either of the top two rungs of a stepladder

Never stepping on any of the top four rungs of an extension ladder

Having a partner hold and steady a ladder as you use the ladder to climb

up and down.

Based on the given scenario, it can be clearly seen that it fulfils all criteria for a SMART goal.

This is an acronym that means Smart, Measurable, Attainable, Realistic and Time-Bound.

With this in mind, we can see that

S = Specific

There is a specific criteria (3.0 GPA) that this person is trying to meet

M = Measurable

This goal is measurable, and can be measured by looking at grade point averages.

A = Attainable

Yes, 3.0 is a B average, which is attainable if you work hard!

R = Realistic

Yes, most grade-based goals are realistic as long as they are not aiming for 100%!

T = Time-Bound

This goal is time bound to one semester

Therefore, we can state that it fulfilled all criteria for a SMART goal

Read more about SMART goals here:

https://brainly.com/question/8986181

#SPJ1

In this exercise we have to use the knowledge of computational language in python to write the code that Style Your Class List answer

ipenup()

backward(100)

for i in range(4):

pensize(5)

pendown()

left(60)

color("green")

forward(50)

right(120)

color("blue")

forward(50)

color("red")

right(120)

forward(50)

penup()

left(180)

forward(50)

See more about python at brainly.com/question/22841107

#SPJ1

Answer:

true and false

Explanation:

Answer:

Functional programming languages are specially designed to handle symbolic computation and list processing applications. Functional programming is based on mathematical functions. Some of the popular functional programming languages include: Lisp, Python, Erlang, Haskell, Clojure, etc.

When a catastrophic risk faced by one firm is partially determined by the behavior of other firms, and when this behavior influences the incentives of the first firm to limit its exposure to the risk, security issues become interdependent.

Because security is a component that requires the integration of several system parts, such as from the authentication and authorization segment where users are authenticated and granted access, and security is established using the encrypted part of the program or system, security interdependence can be seen in the various components of the information system or the computing environment. Security is dependent on the system as a whole, including the link layer security, transport layer security, any encryption methods utilized, and secure data transfer.

The use of link layer security, transport layer security, and encryption techniques are three examples of how security is interdependent.

To get more information about Security Independence :

https://brainly.com/question/28149669

#SPJ1

A class encapsulating the concept of an investment, assuming that the investment has the following attributes is given below:

import java.util.Scanner;

   /**

      This program compares CD /Investment plans input by the year

      broken down by the requirements below:

      This program creates a table of compound interest investment growth over time

      Broken down by: a) year b) balance at end of year

      Finance formula of A= P(1+ r/n)^n*t is used:

      A = Future Value         | P = Initial Investment

      r = annual interest rate |n = times interest is compounded/year

      t = years invested

   */

    public class InvestmentTableFirstTest

    {

       public static void main(String[] args)

       {

            Scanner in = new Scanner(System.in);

            String bestBankName = "";

            double bestGrowth = 0;

            boolean done = false;

            while(!done)

            {

                System.out.print("Plan name (one word, Q to quit): ");

                String bankName = in.next();

                if (bankName.equals("Q"))

                {

                      done = true;

                }

                else

                {

                     System.out.print("Please enter your principal investment: ");

                     final double PRINCIPAL_INVESTMENT = in.nextDouble();

                     System.out.print("Please enter the annual interest rate: ");

                     double iRate = in.nextDouble();

                     System.out.print("Please enter number of times interest is compounded per year:  ");

                     final double INCREMENT = in.nextDouble();      

                     System.out.print("Enter number of years: ");

                     int nyears = in.nextInt();

                     iRate = iRate/100; System.out.println("iRate:" + iRate);

                     //Print the table of balances for each year

                      for (int year = 1; year <= nyears; year++)

                      {

                       double MULTIPLIER = INCREMENT * year;

                       System.out.println("Multiplier: " + MULTIPLIER); // I've included this print statement to show that the multiplier changes with each passing year

                       double interest = 1 + (iRate/INCREMENT);

                       double balance = PRINCIPAL_INVESTMENT;

                       double growth =  balance * Math.pow(interest, MULTIPLIER);

                       growth = growth - PRINCIPAL_INVESTMENT;                      

                       balance = balance + growth;                                  

                       System.out.printf("Year: %2d  Interest Earned:   $%.2f\t   Ending Balance:   $%.2f\n", year, growth, balance);

                      if (bestBankName.equals("") || bestGrowth > growth) // || bestBankName > growth

                      {

                           bestBankName = bankName;  // bestBankName = bankName

                           bestGrowth = growth; // mostGrow = growth

                      }

                         System.out.println("Earning with this option: " + growth);        

                 }

            }

        }

           System.out.println("Best Growth: " + bestBankName);

           System.out.println("Amount Earned: " + bestGrowth);      

      }

   }

Read more about programming here:

https://brainly.com/question/23275071

#SPJ1

The networking device that can be used to implement access lists, dynamic routing protocols, and Network Address Translation (NAT) is a router. The correct option is a.

On computer networks, a router receives and sends data. Routers are frequently mixed up with network hubs, modems, and network switches.

Routers, on the other hand, can combine the functions of these components and connect with these devices to improve Internet access or assist in the creation of business networks.

Wired routers, wireless routers, core routers, edge routers, and VPN routers are all types of routers.

A router can implement access lists and dynamic routing protocols.

Thus, the correct option is a.

For more details regarding a router, visit:

https://brainly.com/question/15851772

#SPJ1

Your question seems incomplete, the missing options are:

a. Router

b. Layer 2 Switch

c. Hub

d. Layer 3 Switch

The value of d[2][0] value of your code is 11.

Coding, also known as computer programming, is the method by which we communicate with computers.

Code tells a computer what to do, and writing code is similar to writing a set of instructions. You can tell computers what to do or how to behave much more quickly if you learn to write code.

A variable called an is declared, and it contains an array of the numbers 5, 10, and 15.

Variable b is a collection of the numbers 2, 4, and 6.

Variable c is also made up of the numbers 11, 33, and 55.

d[2][0] simply means that we should take the d variable, find the index 2 (which is c), and get the index 0 of c. The result should be 11 because index zero of variable c is 11.

Thus, the answer of d[2][0] is 11.

For more details regarding coding, visit:

https://brainly.com/question/17204194

#SPJ1

A relational database is a type of database that stores and provides access to data points that are related to one another. Relational databases are based on the relational model, an intuitive, straightforward way of representing data in tables. In a relational database, each row in the table is a record with a unique ID called the key. The columns of the table hold attributes of the data, and each record usually has a value for each attribute, making it easy to establish relationships among data points.

The relational database is basically used as the set of the table in which the data can be easily accessible without any re-organizing of the table in the database. In the structured query language (SQL), the relational database is used as the standard users and API ( Application programming interface). The relational database is basically needed to store the information or data in the form of tables. Due to the relational database, we can easily compare the data or information because the data are arranged in the form of columns

Database tables

In a relational database, all data is held in tables, which are made up of rows and columns. Each table has one or more columns, and each column is assigned a specific datatype, such as an integer number, a sequence of characters (for text), or a date. Each row in the table has a value for each column.

A typical fragment of a table containing employee information may look as follows:

emp_ID              emp_lname              emp_fname         emp_phone

10057                 Huong                       Zhang                   1096

10693                 Donaldson                Anne                     7821

The tables of a relational database have some important characteristics:

1. There is no significance to the order of the columns or rows.

2. Each row contains one and only one value for each column.

3. Each value for a given column has the same type.

Learn more about Relational Database: brainly.com/question/13262352

#SPJ1