Although the bigger football player will still move, his speed will be substantially slower than the smaller players due to his greater mass.
Two equal and opposing forces are generated at the place of collision when the collision occurs. The more enormous mass will be forced to accelerate by force applied to it, and the smaller group will be forced to slow down by force applied to it.Larger masses will experience less acceleration due to their lower acceleration, which will result in a lower velocity.Momentum happens whenever a person or item moves, but it is especially crucial in sports and situations where collisions happen. A simple method to understand momentum is to see it as a tool that a sportsperson can use to affect a different object or an opponent. A hockey player's high-velocity puck hit can have enough momentum to push the goalie backward. Even though a puck is light and has little mass, National Hockey League players may hit it at speeds of over 100 mph (160 km/h) because momentum is a function of mass and velocity. The puck and the goaltender, along with the goalie's pads, mask, gloves, skates, and stick, briefly unite as the puck strikes the goalie.Complete question: According to the conservation of momentum, if a more minor football player collides with a much larger football player, what can be said about each player's movement after the collision?
A. The larger football player will move, but because of his larger mass, his velocity will be much slower than the smaller player
B. The smaller football player will be stopped completely, his mass being not enough to move the larger one
C. The larger football player will have to start moving towards the smaller one as it collides if there is to be any effect
D. The smaller football player will experience a larger force than the larger football player
To learn more about the conservation of momentum
https://brainly.com/question/3920210
#SPJ1
If your bathroom scale reads 150 lbs, what is your mass in kg? What is your weight in newtons?
what's the momentum of a 99 kg Boulder going 30 m/s?
Answer:
2970kgm/s
Explanation:
p=m.v
=99kg.30m/s
=2970kgm/s
A centrifuge in a medical laboratory rotates at an angular speed of 3,450 rev/min. When switched off, it rotates through 48.0 revolutions before coming to rest. Find the constant angular acceleration (in rad/s2) of the centrifuge.
Answer:
Explanation:no
The capacitance of two capacitors connected in series will is
analogous to
a. two resistors connected in series
b. two resistors connected in parallel
c. none of the above.
d. all of the above.
The capacitance of two capacitors connected in series will is
analogous to two resistors connected in parallel.
What is capacitor?In an electric field, a capacitor is a device that stores electrical energy. It has two terminals and is a passive electrical component. Capacitance refers to a capacitor's effect.
The International System of Units' (ISO) standard unit of capacitance is the farad (F) (SI). It denotes a substance's capacity to store an electric charge. Most electrical capacitors are measured in farads, microfarads (F), or nano-farads to express their value (nF).
to learn more about capacitor go to -
https://brainly.com/question/14883923
#SPJ9
Identify two kinds of data the student will likely collect during his experiment. Identify the type of data collected and how the student might present his data.
The two kinds of data that can be collected during an experiment are qualitative and quantitative data.
What are qualitative and quantitative data?
Numbers are used to convey quantitative data, which are measurements of values or counts. Numerical variables are the subject of quantitative data.
Qualitative data are represented by a name, symbol, or number code and are measurements of "types." Data concerning categorical variables make up qualitative data.
To provide a complete picture of a population, quantitative and qualitative data are frequently combined since they produce distinct results. For instance, if yearly income statistics are acquired (quantitative), occupation data might also be gathered (qualitative) to learn additional specifics about the average annual income for each type of profession.
Depending on whether the variable of interest is numerical or categorical, it is possible to acquire both quantitative and qualitative data from the same data unit.
Therefore, the two kinds of data that can be collected during an experiment are qualitative and quantitative data.
Read more about types of data, here
https://brainly.com/question/14581918
#SPJ1
The following graph illustrates how jamil moves as he goes to the paper shop
The graph is the visual representation of information. It shows the information in graphical form.
What is a graph?The graph shows a visual representation of information.
(a) It will take 360 seconds to travel to the shop.
(b) Jamil covers 400 + 90 + 120 km= 610 km distance.
(c) Speed= distance/ time = 610 km/ 360 = 1.69 m/ second.
(d) He spends 360 seconds at the shop.
(e) Speed = d1/t1 + d2/ t2 + d3/ t3= 450/ 150 + 450 / 90 + 450 / 120
= 3 + 5+ 3.75 = 11.75 m / second.
The graph is the visual representation of information. It shows the information in graphical form.
To learn more about graphs, refer to the link:
https://brainly.com/question/17267403
#SPJ1
A certain brand of light bulb converts 45% of the available electrical current into light. What is the efficiency of the bulb?
The efficiency of the bulb is the 45%, because it is the useful energy or output energy of the light bulb.
What is efficiency?The efficiency of a device is the amount of the energy input to the device that is converted to a useful energy.
So we say that efficiency of a device is how good a device is at converting energy input to useful energy output.
The efficiency of a device or machine is calculated using the following formula;
efficiency = 0utput energy/input energy x 100%
efficiency = useful energy / total energy x 100%
Thus, if a certain brand of light bulb converts 45% of the available electrical current into light. The efficiency of the bulb is the 45%, because it is the useful energy or output energy of the light bulb.
Learn more about efficiency here: https://brainly.com/question/15418098
#SPJ1
What is the magnetic force on a 240 mm length of wire stretched between two towers carrying a 150 A current given that the earth’s magnetic field is
5X10^5T
and makes an angle of
60o
with the wire?
The magnitude of magnetic force is 1.55 mN
We know that,
F = I B L Sin θ
where,
F = Magnetic force
I = Current
B = Magnetic field
L = Length
θ = Angle
Given that,
L = 240 mm = 0.24 m
I = 150 A
B = 5 * [tex]10^{-5}[/tex] T
θ = 60°
F = 150 * 5 * [tex]10^{-5}[/tex] * 0.24 * sin 60°
F = 1.55 mN
Magnetic force is the attractive or repulsive force created when electrically charged particles are moved. So, it is the consequence of an electromagnetic force which is one of the four fundamental forces of nature.
Therefore, the magnitude of magnetic force is 1.55 mN
To know more about Magnetic force
https://brainly.com/question/10353944
#SPJ1
Block 1, of mass m1, is connected over an ideal (massless and frictionless) pulley to block 2, of mass m2, as shown. Assume that the blocks accelerate as shown with an acceleration of magnitude a and that the coefficient of kinetic friction between block 2 and the plane is μ.
Find the ratio of the masses m1/m2 .
Express your answer in terms of some or all of the variables a , μ , and θ , as well as the magnitude of the free-fall acceleration g .
The ratio of the masses will be: (a + gsin(θ) + μgcos(θ)) / (g – a)
What is friction?Friction can be defined as the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other
To solve the above problem, we must find the tension with respect to both masses, and then equate since the tension is the same throughout the entire rope:
For mass 1:
(m1)g – T = (m1)a
substituting where
T = (m1)g – (m1)a
T = (m1)(g – a)
For mass 2:
T – (m2)gsin(θ) – (m2)μgcos(θ) = (m2)a
T = (m2)a + (m2)gsin(θ) + (m2)μgcos(θ)
T = (m2)(a + gsin(θ) + μgcos(θ) )
we will then equate both equations having m1 and m2 were factored in the above equations. we do this in order to isolate m1/m2
(m1)(g – a) = (m2)(a + gsin(θ) + μgcos(θ))
m1/m2 = (a + gsin(θ) + μgcos(θ)) / (g – a)
The ratio of the masses is:
(a + gsin(θ) + μgcos(θ)) / (g – a)
Learn more about friction at: https://brainly.com/question/24338873
#SPJ1
By January, the 1.2 kg of water in the birdbath in Robyn’s backyard has frozen to a temperature of -7.6°C. As the season changes, how much heat must be added to the water to make it a comfortable 26.9°C for the birds? Q=mcΔT and Q=mhf
(Heat of fusion for water is 335,000 J/kg) Round to the tenth place.
The heat that is added is 2277 kJ.
What is the heat to be added?We know that heat is a form of energy that appears as a result of temperature difference that exist between two bodies. In this case now, we are told that by January, the 1.2 kg of water in the birdbath in Robyn’s backyard has frozen to a temperature of -7.6°C.
Now there are three transitions that took place here;
The ice was heated to raise its temperature from -7.6°C to zero degreesThe ice melted at zero degreesThe heat required to raise the temperature from zero degrees to 26.9°CThus;
H = mcicedT + mhf + mcwaterdT
H = (1.2 * 2060 * 7.6) + (1.2 * 335,000) + (1.2 * 4182 * 26)
H = 1745kJ + 402 kJ + 130 kJ
H = 2277 kJ
Learn more about heat of fusion:https://brainly.com/question/14053504
#SPJ1
What is the first step to composing a short piece?
A. Choosing an image as stimuli
B. Choosing your lyrics
C. Choosing a rhythm and a melody
 which of the following questions may be difficult to test scientifically?
What is the average flight speed of an African swallow?
how was Hawaii formed?
why is cheating wrong?
is there evidence of water on other planets?
When conducting a scientific experiment, it will be difficult to test why cheating is wrong. Thus, (c) is the correct answer.
Scientific experiment is an experiment or study conducted by researchers to verify the authenticity of a test or hypothesis scientifically or assess the possibility or effectiveness of something that has not been attempted before. Scientific experiments show what happens when a certain component is modified, which sheds light on cause-and-effect relationships.
Controlled, field and natural experiments are three essential types of scientific experiments.
Keeping in mind that a successful scientific experiment typically evaluates one independent variable at a time, it is crucial to utilize a control group and to hold all other possible variables constant.
Therefore, it is difficult to test scientifically why cheating is wrong.
Learn more about Scientific experiment here:
https://brainly.com/question/13184032
#SPJ9
Answer: why is cheating wrong?
Explanation: may be difficult to test scientifically is why is cheating wrong
A car passes you going at 15 m/s and accelerating at 0.2 m/s2. Another person farther along on the road observes it traveling at 30m/s. How far are you from the other person?
The distance between myself and the other person is 1687.5 m
What is distance?Distance is the length between two points. The S.I unit of distance is meter(m)
To calculate the distance between me and the other person, we use the formula below.
Formula:
v² = u²+2ad........ Equation 1Where:
v = Final speedu = Initial speeda = Accelerationd = distance between me and the other personFrom the question,
v = 30 m/su = 15 m/sa = 0.2 m/s²Substitute these values into equation 1
30² = 15²+2×0.2×d900 = 225+0.4d0.4d = 900-2250.4d = 675d = 1687.5 mHence, the distance between myself and the other person is 1687.5 m.
Learn more about distance here: https://brainly.com/question/26046491
#SPJ1
A brass plate has a 4.00 inch diameter hole in it. A rod with a diameter of 4.01 inches is to be
threaded through this plate to produce an interference fit. This is to be done by increasing the temperature of the plate, passing the rod through the plate, and then allowing the plate to return to its normal temperature. What must be the temperature change of the plate? (The coefficient of expansion per degree centigrade for brass is “19x10^-6 or 0.000019”)
The change in the temperature of the plate is 160 degree centigrade
What is the superficial expansion?We know that the superficial expansion has to do with the increase in the rea per kelvin rise in the temperature of the plate. The first thing that we must do now is to obtain the area of the plate before and after.
Initial area of the plate in square meters = πd^2/4 = 3.14 * (0.1016)^2/4 = 8.10 * 10^-3 m^2
Final area of plate in square meters = πd^2/4 = 3.14 * (0.1019)^2/4
= 8.15 * 10^-3 m^2
2α = ΔA/A1θ
α = linear expansion
ΔA = change in area
A1 = initial area
θ = temperature change
2(1.9 * 10^-5) = 5 * 10^-5/8.10 * 10^-3θ
2(1.9 * 10^-5) * 8.10 * 10^-3θ = 5 * 10^-5
θ = 5 * 10^-5/2(1.9 * 10^-5) * 8.10 * 10^-3
θ = 5 * 10^-5 /3.1 * 10^-7
θ = 1.6 * 10^2 or 160 degree centigrade
Learn more about superficial expansion:https://brainly.com/question/28293570?
#SPJ1
A ball is dropped from the top of a 55.0 m-high cliff. At the same time, a carefully aimed stone is thrown straight up from the bottom of the cliff with a speed of 26.0 m/s. The stone and ball collide part way up.
Distance from base of the cliff is 33.2 m
Distance is the sum of an object's movements, regardless of direction. Distance can be defined as the amount of space an object has covered, regardless of its starting or ending position.
It is given that
height of cliff = 55.0 m
speed of stone = 26.0 m/s
y1 = 55.0 - 4.9 t^2
y2 = 26 t - 4.9 t^2
y2 - y1 = 26 t - 55
t = 55/26 = 2.11 s
y1 = 33.2 m
Hence, distance from base of the cliff is 33.2 m
Learn more about Distance here:
https://brainly.com/question/17146782
#SPJ9
Complete Question
A ball is dropped from the top of a 55.0m high cliff. At the same time, a carefully aimed stone is thrown straight up from the bottom of the cliff with a speed of 26.0m/s The stone and ball collide part way up.
How far above the base of the cliff does this happen in meters?
Question for everybody... Do you like billie eilish or do u hate her and give a explanation why you hate or like her?
Answer:
I like Billie Eilish
Explanation:
My friend introduced me to yer music and really liked stuff like the 30th and Happier than ever. Me and my friend bond over her music and my friend has her own records that we listen too. Billie sticks up for herself and hasnt had to many big controversal moments and she bring modernism to the music indrustry. We have seen many sides of her and she supports others and seems to be a good be a good human being.
Answer:
Yes I like Billie sm
Explanation:
I've heard her music in so many places for years, and she is on my playlist. She is very amazing! I love Happier than Ever, lovely, and Ocean Eyes, they are my fav!
Science 6a unit 2 test study guide
Please help me out!!! This is a major grade been taking care of my baby brother while mom works barely had time to study!
Answer:
at number 8 the answer is Uranus
What system includes the system that starts the vehicle?
Explanation:
The electrical system provides the voltage necessary to operate the many electrical components on the vehicle such as the vehicle's lighting system. The main source of power for the electrical system is the battery. The electrical system also includes the starting system and the charging system.
5. A ball is thrown up in the air with an initial velocity of 11.4 m/s. What is the maximum height in the air the ball will reach?
Answer:
6.50m
Explanation:
Vf=0
Vi=11.4
g=-10(against the gravity)
D=x?
Vf²=vi²+2ad
0²=11.4²+2(-10)d
0=129.96+-20d
-129.96=-20d
-129.96/-20=d
D=6.50m
What is the force in this
Answer:
It something big enough for this
might be balance force, because the stacks of sticks remains stationary/ stable
definition of balance force = it is when resultant force acting on an obeject is zero and its said to be equilibrium. by newton's first law, the object remains stationary or continues moving at a constant velocity,
bye, hope u understand
John is traveling north at 20 meters/second and his friend Betty is traveling south at 20 meters/second. If north is the positive direction, what are John and Betty's speeds?
A.
-20 meters/second, 20 meters/second
B.
20 meters/second, -20 meters/second
C.
-20 meters/second, -20 meters/second
D.
0 meters/second, 40 meters/second
Answer:
B. 20 meters/ second, -20 meters/ second
How do microwaves differ from radio waves?
OA. Microwaves have a lower frequency.
OB. Radio waves have a shorter wavelength.
C. Microwaves have more energy.
OD. Microwaves are not used in communications.
Microwaves differ from radio waves as they have higher frequencies than radio waves.
A recurring event's frequency is measured by how many times it occurs in a unit of time. To emphasize differences between spatial and angular frequencies, it is also sometimes referred to as ordinary frequency or temporal frequency respectively.
Microwaves propagate in a single direction at a time because they are directional. Radio waves have multiple directions in which they can travel from their source. The acceleration of electrons produced in the radio antenna produces radio waves. Microwaves are a subclass of radiowaves.
A microwave is an electromagnetic wave with a low frequency and relatively long wavelength. Despite having greater frequencies than conventional radio waves, microwaves are frequently categorized as radio waves. They have more energy and higher frequencies.
The correct option is B.
Learn more about radiowaves here:
https://brainly.com/question/69373
#SPJ4
Show transcribed data A vacationer gets into his outboard motorboat and leaves a dock on a river bank for a day of fishing. Just as he turns upstream, he hears a splash but pays no attention and continues cruising at normal speed. Unfortunately, only 25 minutes later does he realize that his (fortunately watertight) lunchbox is missing. He then turns downstream, with the motor still set at cruising speed. Luckily, he sights his lunchbox floating down the river and retrieves it at a point 2.8 km downstream of the dock. 9 How long after turning around does he pick up his lunch? Give your answer in minutes.
It is after a time of 25 minutes that the vacationer picks up his lunch after turning around the dock.
Let the speed of the motorboat be v and the speed of the river be u.
Upstream - The term "upstream" refers to a boat that is moving against the direction of the stream. The boat's upstream speed in this situation is its net speed.
Downstream - A boat is said to be moving downstream if it is moving in the same direction as the stream. In this instance, the boat's downstream speed is its net speed.
Given in the question
Distance travelled downstream = d = 2.8 km
Time = t = 25 mins = 25 × 60 = 1500 seconds
Downstream Speed = v + u
Let the time after he picks the lunch be t' seconds
Distance traveled by boat in t' seconds
d = (v + u )t'
Distance traveled by lunch in t + t' seconds
x = u(t + t')
Upstream Speed = v - u
Distance traveled by boat upstream :
x' = (v-u)t
So accordingly,
x + x' = d
u(t + t') + (v-u)t = (v + u )t'
ut + ut' + vt -ut = vt' + ut'
vt = vt'
t = t'
t' = t = 1500 seconds = 25 minutes
So, the vacationer picks up the lunch 25 mins after turning around.
LEARN MORE ABOUT RELATIVE MOTION HERE:
https://brainly.com/question/867069
#SPJ9
A speedboat with a mass of 531 kg (including the driver) is tethered to a fixed buoy by a strong 30.3 m cable. The boat's owner loves high speed, but does not really want to go anywhere. So the owner revs up the boat's engine, makes a lot of noise, and runs the boat in circles around the buoy with the cable supplying all the necessary centripetal force. When the tension of the cable is steady at 12900 N, with what force is the boat's engine pushing the boat? Different physics textbooks treat drag force somewhat differently and use different formulas. For the present purpose, take the water's drag force on the boat to be (450 kg/m)×2, where denotes the boat's speed. Ignore any drag force on the cable.
As the tension in the rope is constant therefore the boat engine will also be pushing the boat with the same force as that of the drag force that is given to be 450 Newton.
What is a drag force?Drag force is similar to friction force but is experienced by a moving body in a fluid. Direction of drag force is a positive to the direction of motion.
What is centripetal force?Centripetal force is not a new force in nature but a manifestation of some force that causes rotation of a body.
Given:
Mass of the boat = 531 kg
Tension in the cable = 12900 Newton
Drag force experienced by the boat = 450 N
The boat along with the man is rotating using a cable which experiences a constant tension of 12900 Newton.
The boat's engine should also be generating a force perpendicular to the circular path travelled by the boat.
Now the tension in the string is constant this implies that all the force that the both engine is generating is being used in balancing the drag force exerted by water on the boat.
Therefore, the force produced by the engine will be equal to 450 Newton which will be used to balance the drag force.
Learn more about drag force here: https://brainly.com/question/27817330
#SPJ1
What is the scientific name of the cup-shaped pouches of lung tissue that are one-cell thick, and they are the site of gas exchange?
A. Bronchioles
B. Trachea
C. Alveoli
D. Glottis
E. Pharynx
OF. Larynx
G. Nose
Answer:
your answer is C
Explanation:
Alveoli is your answer
A box with mass m = 10
kg is pushed up a
slope to a height of h =
10 m. The slope makes
a 8 = 30° angle with
the horizontal and the
friction force along the
slope is f = 5 N. What
is the input work done
on the box?
Answer:
20m
Explanation:
u=20ms−1
v=0
f=μmgcosθ
mgsinθ+f=ma
mgsinθ+μmgcosθ=ma
530+0.5×10×54=a
6+4=a
a=10ms−2
v2−u2=2as
0−202=2×(−10)×s
s=20m
0.030 km
2. The Olympic record for the marathon is 2hr, 1min, 39s. Determine the average velocity in m/s and
miles per hour of the record.
0.0041m/s and 0.00917 mile/hr. is the average velocity.
If an object moves with an average speed of v for time t, then the distance traveled by this object is s= v.t
Average speed and time are given in the task. So you can use this formula to calculate the marathon distance.
Velocity or speed is defined as: The rate of change of the object's position in any direction. Velocity is measured as the ratio of distance traveled and time traveled. Velocity is a scalar quantity because it has only direction and not magnitude.
time =2hr, 1min, 39s s= 0.030km
t= 7299s s=30m
v=s/t=30/7299
=0.0041m/s.
in mile per hour = 0.00917 mile/hr
So feom the above equations solved the answer is 0.0041m/s and 0.00917 mile/hr.
Learn ore about Average velocity here https://brainly.com/question/24739297
#SPJ9
define physical fitness in your own definition
"One's capacity to carry out daily activities with maximum efficiency, strength, and endurance while managing the illness, exhaustion, and stress and engaging in less sedentary behavior."
The health of the heart, lungs, and muscles is a component of physical fitness. Fitness also somewhat affects traits like mental acuity and emotional stability because what we do with our body also affects what we can do with our minds.
Hence Being physically fit doesn't need include dominating a particular sport or having bulging muscles.
Learn more about fitness here
https://brainly.com/question/18267504
#SPJ1
Which one of the following is NOT consistent with a car which is accelerating?
Question 13 options:
A car is moving with a high speed.
A car is moving with a decreasing speed.
A car is changing direction.
A car is moving with an increasing speed.
A car moving at a decreasing speed is not consistent with a car that is accelerating. Hence, option B is correct.
What is Acceleration?Acceleration is the general term for any process where the velocity changes. There are just two methods for speeding up : changing your speed or changing your direction, or changing both. This is because velocity is both a speed and a direction.
Its SI unit is m/s² and the dimension is LT⁻² where,
L= length and,
T= Time
Acceleration, a= Velocity/Time
Hence, the car is moving with a decreasing speed will not consistent with a car which is accelerating.
To get more information about Acceleration :
https://brainly.com/question/12550364
#SPJ1
Velocity/Acceleration
a car driving down the highway goes from the 12 mile marker and sometimes later passes the 158 mile mark. how many miles has the car driven
The distance travelled by the car is 146 miles.
What is distance?Distance is a measure the space between two points.
Distance is measured in units of length such as kilometer, meters, miles, feet, etc.
In order to measure the distance between two points, a measuring instrument such as a ruler is used.
Considering the car that was travelling along the road, the distance traveled by the car is calculated as follows;
The car starts moving from an initial highway marker of 12 miles.
The car then travels from the initial highway marker of 12 miles to a second highway marker of 158 miles.
The distance travelled by the car is obtained by finding the differences between the highway markers.
Difference between the highway markers = 158 miles - 12 miles
Difference between the highway markers = 146 miles.
Learn more about distance at: https://brainly.com/question/26046491
#SPJ1