an astronaut is being testing in a centrifuge. the centifuge has a radius of 8.3m and, in starting, rotates according to

The electric field is defined as the field that surrounds the charges. The electric field is radially outwards if the charge is positive and the electric field is radially inwards if the charge is negative.

The electric field is directly proportional to the charge and is inversely proportional to the distance between them. E = KQ/r, where Q is the charge and r is the distance between the source and test charge. k is the constant of proportionality and is equal to 9×10⁹N.m₂/C².

From the given,

The radius of the spherical shell, R = 15 cm

Total charge (Q) = 28μC

A) electric field E=?

r = 10 cm

The electric field at a distance of 10 cm contains no charge. The Gaussian surface is considered inside of the sphere as the sphere of radius is 15 cm. Inside the sphere, there is no charge. Hence, the electric field, E=0.

B) electric field at a distance of 25 cm=?

E = kQ/r

   = 9×10⁹×26×10⁻⁶ / (0.25)²

   = 3.744×10⁶ C/m.

Thus, the electric field at a distance of 25 cm is 3.74C/m.

To learn more about the Electric field:

https://brainly.com/question/11482745

#SPJ1

To find the amplitude of the oscillation, we can use the relation between the maximum speed and the amplitude for simple harmonic motion. The maximum speed of the glider is equal to the amplitude multiplied by the angular frequency.

Given that the period of oscillation is 2.40 s, we can calculate the angular frequency (ω) using the formula:

ω = 2π / T

where T is the period.

Substituting the values:

ω = 2π / 2.40 s ≈ 2.618 rad/s

Now, we can find the amplitude (A) using the equation:

max speed = A * ω

Given that the maximum speed is 32.0 cm/s, we need to convert it to meters per second:

max speed = 32.0 cm/s * (1 m / 100 cm) = 0.32 m/s

Substituting the values:

0.32 m/s = A * 2.618 rad/s

Solving for A:

A = 0.32 m/s / 2.618 rad/s ≈ 0.122 m

Therefore, the amplitude of the oscillation is approximately 0.122 m.

To find the glider's position at t = 0.300 s, we can use the equation for the displacement in simple harmonic motion:

x = A * cos(ωt)

Substituting the values:

x = 0.122 m * cos(2.618 rad/s * 0.300 s)

Calculating the value, we find:

x ≈ 0.113 m

Therefore, at t = 0.300 s, the glider's position is approximately 0.113 m.

Learn more about glider's position   from

https://brainly.com/question/31960990

#SPJ11

Answer: the answer is b

Explanation: becuse the friction of the air heats it

The elasticity of highly elastic body is can tend to infinity and not represented as 1, 0 or 0.5.

option D; none of them.

Elasticity is the tendency of solid objects and materials to return to their original shape after the external forces (load) causing a deformation are removed.

An object is said to be elastic when it comes back to its original size and shape when the load is no longer present and inelastic if it dose not return back to its original size and shape after being deformed.

The elasticity of a highly elastic body is not represented by a specific numerical value like 1, 0, or 0.5. In other words, the elasticity of an elastic material can tend to infinity.

Learn more about elasticity here: https://brainly.com/question/29767033

#SPJ1

To estimate the radius of curvature of the convex security mirror, we can use the mirror equation:

1/f = 1/di + 1/do

m = -d_i / d_o

Substituting the given values into the magnification equation:

0.5 = -d_i / (-2.8)

Simplifying the equation:

d_i = 0.5 * 2.8

d_i = 1.4 m

where f is the focal length of the mirror, di is the image distance, and do is the object distance. Given that you are standing 2.8 m from the mirror and you estimate the height of your image to be half of your actual height, we can assume that the image distance is equal to the object distance (di = do).

Since the mirror is convex, the image formed is virtual and upright, meaning the focal length is positive.

Plugging the values into the mirror equation, we have: 1/f = 1/do + 1/do

Simplifying, we get: 1/f = 2/do

Since di = do, we can rewrite the equation as: 1/f = 2/di

Given that you estimate the height of your image to be half of your actual height, the magnification (M) is 1/2.

Using the magnification formula, M = -di/do, we can rewrite the equation as: 1/f = -2

Solving for f, we find: f = -1/2

The negative sign indicates that the mirror is convex. Therefore, the estimated radius of curvature of the mirror is approximately -0.5 m or 0.5 m (rounded to two significant figures).

Learn more about radius here

https://brainly.com/question/29595940

#SPJ11

The statement "vapor pressure of water decreases with addition of table salt, thus increasing its boiling point" is true.

When table salt (NaCl) is added to water, it dissociates into sodium ions (Na⁺) and chloride ions (Cl⁻). These ions interfere with the vaporization process of water, reducing the number of water molecules escaping from the liquid surface. As a result, the vapor pressure of the water decreases.

Boiling occurs when the vapor pressure of a liquid equals the atmospheric pressure. By decreasing the vapor pressure, the addition of table salt raises the boiling point of water. This means that a higher temperature is required for the vapor pressure of the water to equal the atmospheric pressure, leading to an increased boiling point.

The phenomenon of increasing the boiling point of a liquid by adding solutes is known as boiling point elevation. It is a colligative property, meaning it depends on the concentration of solute particles rather than their identity.

In the case of table salt and water, the presence of ions contributes to the boiling point elevation.

Therefore, (True) Adding table salt to water reduces the vapor pressure of water, thereby raising its boiling point.

To know more about atmospheric pressure, refer here:

https://brainly.com/question/31634228#

#SPJ4

It is important to note that determining the exact height of the pepper in the shaker on the right is difficult without more information. From the given image, we can estimate that the shaker is approximately half full, and since the total height of shaker .

the shaker is 160 millimeters, we can assume that the height of the pepper is around 80 millimeters. However, this is only an approximation and the actual height could vary slightly.

the approximate height the shaker on the right is filled with pepper is: c. 80 millimeters. The long answer includes the explanation that among the given options, 80 millimeters best represents the height of the pepper in the shaker on the right.

To know more about height  Visit;

https://brainly.com/question/30206477

#SPJ11

The initial speed needed for the ball to land at the target that is 42 m away, in m/s, is approximately 20.79 m/s.

To solve this problem, we can use the kinematic equation:
d = v_i * t
where d is the horizontal distance traveled by the ball, v_i is the initial horizontal velocity of the ball, and t is the time it takes for the ball to reach the target.
Since the ball is thrown horizontally, its initial vertical velocity is zero, and we can use the kinematic equation for vertical motion to find the time it takes for the ball to fall from a height of 20 m:
y = v_i * t - 0.5 * g * t^2
where y is the initial height of the ball, g is the acceleration due to gravity (9.81 m/s^2), and t is the time it takes for the ball to reach the ground.
Solving for t, we get:
t = sqrt(2 * y / g) = sqrt(40 / 9.81) ≈ 2.02 s
Now we can use the horizontal distance formula to find the initial velocity needed for the ball to travel 42 m in 2.02 s:
v_i = d / t = 42 / 2.02 ≈ 20.79 m/s
To know more about acceleration, visit:

https://brainly.com/question/2303856

#SPJ11

The strategy used by tuna fish wave to be ectothermic while slightly elevating their inner body temperature is known as regional endothermy.

Endothermy is the ability of an animal to regulate its body temperature internally. Ectothermy, on the other hand, is the ability of an animal to regulate its body temperature externally. Tuna fish are typically considered ectothermic, but they have developed a unique strategy called regional endothermy.

The rete mirabile is a network of blood vessels located near the muscles, where warm blood from the muscles transfers heat to the colder blood returning from the gills. This heat exchange system enables tuna fish to maintain a slightly elevated internal body temperature compared to the surrounding water, providing them with increased muscle efficiency and better swimming performance.

To know more about wave visit:

https://brainly.com/question/25954805

#SPJ11

As oil is pumped through a hydraulic system, it progressively builds pressure and flows through the system, providing power to hydraulic components such as cylinders, motors, and valves.

The oil's flow rate, viscosity, and temperature can all impact the system's performance and efficiency. It's crucial to maintain the oil's cleanliness and monitor its level to ensure the hydraulic system's proper function.

As oil is pumped through a hydraulic system, it progressively flows from the hydraulic pump, which generates the required pressure, to various components such as valves, actuators, and cylinders.

These components help control and transmit the energy created by the pressurized oil, allowing the hydraulic system to perform work efficiently. Here's a step-by-step explanation of the process:

1. The hydraulic pump draws oil from the reservoir, increasing its pressure and generating the necessary power.

2. The pressurized oil flows through the hydraulic lines, which are designed to withstand the high pressure.

3. The oil reaches control valves, which regulate the flow and direction of the oil within the system.

4. The oil then moves to the actuators (such as hydraulic cylinders or hydraulic motors), where the pressurized oil's energy is converted into mechanical force, allowing the system to perform work.

5. Once the work is done, the oil's pressure decreases, and it returns to the reservoir, where it may be filtered and re-circulated through the hydraulic system.

As oil progresses through a hydraulic system, it's essential to maintain its proper viscosity, cleanliness, and temperature to ensure efficient performance and prevent component wear or damage.

To know more about hydraulic system visit -

brainly.com/question/12008408

#SPJ11

When we talk about resonant frequencies, we refer to the natural frequencies at which an object vibrates when it's disturbed. The number of antinodes, on the other hand, refers to the points on the standing wave where the displacement is at its maximum. So, if we divide each resonant frequency by the corresponding number of antinodes, we obtain a value that represents the frequency at each antinode.

There is indeed a pattern that emerges when we perform this calculation. We find that the frequency at each antinode is a constant value, irrespective of the resonant frequency. This value is known as the fundamental frequency or the first harmonic. It represents the lowest possible frequency at which an object can vibrate.

The significance of this pattern is that it tells us that the different harmonics of an object's vibration are all integer multiples of the fundamental frequency. This is known as the harmonic series and is a fundamental concept in physics and music theory. By understanding this pattern, we can predict the resonant frequencies of an object and even manipulate them to our advantage in various applications.

When you take resonant frequencies and divide each by the corresponding number of antinodes, you may observe a pattern. This pattern typically shows that the resulting value remains relatively constant. The significance of this pattern is that it highlights the fundamental frequency of the system. The fundamental frequency is the lowest frequency at which a system can vibrate, and it serves as the basis for all the other resonant frequencies, which are usually integer multiples of the fundamental frequency. This relationship between resonant frequencies and antinodes helps us understand the harmonic nature of oscillating systems and their modes of vibration.

To know  more about  Resonant frequencies visit

https://brainly.com/question/32273580

SPJ11

To find the average current in the lightning bolt, we can use the formula I = Q/t, where I is current, Q is the charge, and t is the time. In this case, the charge is 15 coulombs and the time is 500 microseconds (or 0.0005 seconds). So, the average current would be:

I = Q/t
I = 15 coulombs / 0.0005 seconds
I = 30,000 amperes

Therefore, the average current in the lightning bolt would be 30,000 amperes. It's important to note that this is an extremely high current, which is why lightning can be so dangerous.

The average current in a lightning bolt can be calculated using the formula I = Q / t, where I represents the average current, Q is the charge transferred, and t is the duration. In this case, Q is 15 coulombs and t is 500 microseconds (500 × 10^-6 seconds). Plugging in the values, we get I = 15 / (500 × 10^-6) which simplifies to I = 15 / 0.0005. This results in an average current of I = 30,000 Amperes for the lightning bolt.

To know more about the average current in the lightning bolt visit

https://brainly.com/question/14903721

SPJ11

The maximum height that the projectile reaches is 264.49 meters

To find the maximum height reached by a projectile launched in the air, we can use the kinematic equations of motion.

Assuming the projectile follows a parabolic trajectory without considering air resistance, we can use the equation for vertical motion:

h = (v₀²sin²θ) / (2g)

Where:

Since the launch angle is not given, we can assume it to be the angle that gives the maximum height. This occurs when the projectile is launched straight up, so θ = 90 degrees.

Plugging the values into the equation, we have:

h = (72²sin²(90°)) / (2 * 9.8)

h = (72² * 1) / (2 * 9.8)

h = 5184 / 19.6

h ≈ 264.49

Therefore, the maximum height reached by the projectile is approximately 264.49 meters

More on maximum height can be found here: https://brainly.com/question/11182480

#SPJ1

During the collision, the 6 kg helmet experiences a change in velocity as it comes to a stop (from 13.3 m/s to 0 m/s). The time it takes for this change is 0.0700 s. The force exerted on the helmet by the dashboard is approximately -1134 N, w

To find the force exerted on the helmet by the dashboard, we can use the equation:

Force = (mass × change in velocity) / time

Force = (6 kg × (0 m/s - 13.3 m/s)) / 0.0700 s

Force = (6 kg × -13.3 m/s) / 0.0700 s

Force ≈ -1134 N
The negative sign indicating that the force is in the opposite direction of the initial motion of the helmet.

To know more about Force, visit

https://brainly.com/question/12785175
#SPJ11

The first diagram is a blackbody radiation curve that shows that an increase in wavelength results in a decrease in the intensity of radiation

The second diagram is of stars showing the shift from red to blue color as the temperature of the stars increases.

The third diagram shows that the brightness of stars increases with an increase in temperature.

Stars are massive, luminous celestial objects composed of hot gases, primarily hydrogen and helium held together by their own gravity and generate energy through nuclear fusion reactions in their cores.

Stars vary in size from small relatively cool stars known as red dwarfs to massive, hot stars called blue giants. They exist in a wide range of colors, luminosities, and temperatures, which are determined by their mass, age, and stage of evolution.

Learn more about stars at: https://brainly.com/question/17870368

#SPJ1

The period (T) of a pendulum is given by the equation:

T = 2π√(l/g)

(T/2)^2 = (2π√(l'/g))^2

T^2/4 = (4π^2l')/g

where l is the length of the pendulum and g is the pendulum due to gravity. If we have a pendulum with a period of T/2, we can substitute this value into the equation and solve for the length (l') of the new pendulum:

T/2 = 2π√(l'/g)

To find the relationship between l and l', we can square both sides of the equation:

(T/2)^2 = (2π√(l'/g))^2

T^2/4 = (4π^2l')/g

Rearranging the equation, we get: l' = (T^2/16π^2)g

Comparing this equation with the original equation for the period of a pendulum, we can see that l' is equal to l/4. Therefore, the length of a pendulum with a period of T/2 is L/4.

So, the correct answer is (D) L/4.

Learn more about pendulum here

https://brainly.com/question/27187715

#SPJ11

To find the electric field strength required for 86 keV electrons to pass through undeflected in a crossed-field velocity selector, we can use the equation for the electric field strength in terms of the magnetic field strength, velocity, and charge of the particle.

The velocity of the electron can be determined using the kinetic energy equation:

KE = 0.5 * m * v^2

Given the mass of the electron (m = 9.10939 × 10^-31 kg) and the kinetic energy (KE = 86 keV), we can calculate the velocity (v) of the electron.

KE = 0.5 * m * v^2

86 keV = 0.5 * (9.10939 × 10^-31 kg) * v^2

Solving for v, we have:

v^2 = (2 * 86 keV) / (9.10939 × 10^-31 kg)

v^2 = 1.88718 × 10^23 m^2/s^2

v = √(1.88718 × 10^23) m/s

v ≈ 4.344 × 10^11 m/s

Now, for an electron moving perpendicular to a magnetic field (B) and an electric field (E), the Lorentz force is given by:

F = q * (E + v * B)

Since we want the electrons to pass through undeflected, the Lorentz force should be zero. Therefore:

0 = q * (E + v * B)

Solving for the electric field (E):

E = -v * B

Substituting the values:

E = -(4.344 × 10^11 m/s) * (0.045 T)

E ≈ -1.9558 × 10^10 V/m

The electric field strength required for the 86 keV electrons to pass through undeflected in the crossed-field velocity selector is approximately 1.9558 × 10^10 V/m. Note that the negative sign indicates the direction of the electric field.

Learn more about  crossed-field velocity selector from

https://brainly.com/question/15587068

#SPJ11

The change in the truck's kinetic energy is approximately 113709.9718 Joules.

Kinetic energy is a fundamental concept in physics that represents the energy possessed by an object due to its motion. It is a form of energy associated with the speed or velocity of an object. When an object is in motion, it has the ability to do work or transfer energy to other objects.

Given:

Mass of the truck (m) = 1980 kg

Initial velocity (v1) = 42 km/h = 11.67 m/s

Final velocity (v2) = 57 km/h = 15.83 m/s

Using the formula for kinetic energy:

Initial kinetic energy (KE1) = (1/2) * m * v1²

= (1/2) * 1980 kg * (11.67 m/s)²

Final kinetic energy (KE2) = (1/2) * m * v2²

= (1/2) * 1980 kg * (15.83 m/s)²

Calculating the initial kinetic energy:

KE1 = (1/2) * 1980 kg * (11.67 m/s)²

= 1/2 * 1980 kg * 136.1564 m²/s²

= 133770.5524 Joules

Calculating the final kinetic energy:

KE2 = (1/2) * 1980 kg * (15.83 m/s)²

= 1/2 * 1980 kg * 250.1089 m²/s²

= 247480.5242 Joules

Now, let's calculate the change in kinetic energy:

ΔKE = KE2 - KE1

= 247480.5242 Joules - 133770.5524 Joules

= 113709.9718 Joules

Therefore, the change in the truck's kinetic energy is approximately 113709.9718 Joules.

Learn more about kinetic energy:

https://brainly.com/question/999862

#SPJ4

The self-inductance of the solenoid is approximately 1.256 × 10⁻³ H (henry).

To calculate the self-inductance of a solenoid, you can use the formula L = μ₀ * n² * A * l, where L is the self-inductance, μ₀ is the permeability of free space (approximately 4π × 10⁻⁷ H/m), n is the number of turns per unit length, A is the cross-sectional area, and l is the length of the solenoid.
Given the solenoid is 50 cm long and has 500 turns of wire, we first need to convert the length to meters: 50 cm = 0.5 m. Now we can find the number of turns per unit length: n = 500 turns / 0.5 m = 1000 turns/m.
The cross-sectional area is given as 2.0 cm², which needs to be converted to square meters: 2.0 cm² = 2.0 × 10⁻⁴ m².
Now, we can use the formula:
L = (4π × 10⁻⁷ H/m) * (1000 turns/m)² * (2.0 × 10⁻⁴ m²) * (0.5 m)
L ≈ 1.256 × 10⁻³ H
To know more about self-inductance, visit:

https://brainly.com/question/28167218

#SPJ11

The angular velocity of the thin ring after it has traveled a distance of s down the plane, assuming it rolls without slipping, is given by ω = v0 / (R + s), where v0 is the initial angular velocity and R is the radius of the ring.

When a thin ring rolls without slipping, the linear velocity of any point on the ring is directly proportional to its distance from the center of the ring. In other words, the linear velocity v of a point on the ring can be expressed as v = ω * r, where ω is the angular velocity of the ring and r is the distance of the point from the center of the ring.

Since the ring is rolling without slipping, the linear velocity v of any point on the ring is also equal to the product of its angular velocity ω and the radius of the ring R. Therefore, we have v = ω * R.

Initially, the center of the ring is given an angular velocity of v0. So we can write v0 = ω0 * R, where ω0 is the initial angular velocity.

Now, as the ring travels a distance s down the plane, the center of the ring will also move a linear distance s. This means that the effective radius of the ring becomes R + s.

Using the relationship between linear velocity and angular velocity, we can write the equation:

v = ω * (R + s)

Substituting v0 = ω0 * R, we have:

v0 = ω * (R + s)

Solving for ω, we get:

ω = v0 / (R + s)

This equation gives us the angular velocity of the thin ring after it has traveled a distance of s down the plane, assuming it rolls without slipping.

The angular velocity of the thin ring, after it has traveled a distance of s down the plane while rolling without slipping, is given by ω = v0 / (R + s), where v0 is the initial angular velocity and R is the radius of the ring.

Learn more about angular  visit:

https://brainly.com/question/13014974

#SPJ11

To estimate the energy expenditure during horizontal treadmill walking, we can use the Metabolic Equivalent of Task (MET) method.

MET is a unit that represents the metabolic rate, where 1 MET is equivalent to the energy expenditure at rest. The formula to estimate energy expenditure in METs is:

Energy Expenditure (METs) = Treadmill Speed (m/min) / 3.5

To convert the energy expenditure to ml ⋅ kg^(-1) ⋅ min^(-1), we multiply the MET value by 3.5.

Let's calculate the estimated energy expenditure for the given examples:

a) Treadmill speed = 50 m ⋅ min^(-1), Subject's weight = 62 kg

Energy Expenditure (METs) = 50 / 3.5 ≈ 14.29 METs

Estimated Energy Expenditure = 14.29 METs * 3.5 ml ⋅ kg^(-1) ⋅ min^(-1) ≈ 50 ml ⋅ kg^(-1) ⋅ min^(-1)

b) Treadmill speed = 80 m ⋅ min^(-1), Subject's weight = 75 kg

Energy Expenditure (METs) = 80 / 3.5 ≈ 22.86 METs

Estimated Energy Expenditure = 22.86 METs * 3.5 ml ⋅ kg^(-1) ⋅ min^(-1) ≈ 80 ml ⋅ kg^(-1) ⋅ min^(-1)

Therefore, the estimated energy expenditure during horizontal treadmill walking is approximately 50 ml ⋅ kg^(-1) ⋅ min^(-1) for a treadmill speed of 50 m ⋅ min^(-1) and a subject's weight of 62 kg, and approximately 80 ml ⋅ kg^(-1) ⋅ min^(-1) for a treadmill speed of 80 m ⋅ min^(-1) and a subject's weight of 75 kg.

Learn more about horizontal here

https://brainly.com/question/25825784

#SPJ11

When a gas contracts, its volume decreases. This means that the gas molecules are getting closer together and their kinetic energy (movement) is decreasing. In order for the gas to contract, some form of energy must be released from the system. This energy is often released as heat to the surroundings.

The correct option is A

So, in this case, the gas is releasing heat to the surroundings. This means that q, the heat transferred from the system to the surroundings, is negative. The negative sign indicates that heat is leaving the system.

Now, let's consider work. Work is defined as the energy required to move an object a certain distance against a force. In the case of a gas, work can be done when the gas expands or contracts against an external force, such as the walls of a container.

When a gas contracts, it is doing work on its surroundings. This means that w, the work done by the gas, is negative. The negative sign indicates that work is being done by the system on the surroundings.

To know more about kinetic energy visit:-

https://brainly.com/question/999862

#SPJ11

The ratio of the speed of the pulse of the wave from the first string to the second string is 1:1. The speed of a pulse in a string depends on the tension (T) and the linear mass density (μ). The formula for wave speed (v) is: v = √(T/μ)

Since both strings have the same tension (T) and linear mass density (μ), we can compare their speeds directly. Let v1 and v2 be the speeds of the pulses in the first and second strings, respectively.

Given that the first string is twice as long as the second, the ratio of their speeds (v1/v2) will be equal to 1 because the length of the strings does not affect the wave speed, as both strings have the same tension and linear mass density.

to know more about mass, visit
https://brainly.com/question/28021242

#SPJ11

The effect of weight on u(μ) is determined by the specific measurement error. In general, systematic measurement errors can cause an increase or decrease in u(μ), whereas non-systematic measurement errors are less likely to cause an increase or decrease in u(μ).

It is difficult to say for sure whether weight affects u(μ) without knowing more about the specific measurement error. However, in general, it is possible that weight could affect u(μ) if the measurement error is systematic. For example, if the measurement error is always positive, then heavier objects would tend to be measured as being heavier than they actually are. This would lead to an increase in u(μ). Conversely, if the measurement error is always negative, then heavier objects would tend to be measured as being lighter than they actually are. This would lead to a decrease in u(μ).

Here are some examples of how weight could affect u(μ) in different measurement situations:

If you are measuring the weight of a person on a scale, then the measurement error is likely to be small and systematic. This is because the scale is calibrated to be accurate within a certain range of weights. As a result, the weight of the person is likely to be measured accurately, regardless of their actual weight.

If you are measuring the weight of a piece of fruit on a balance, then the measurement error is likely to be larger and non-systematic. This is because the balance is not as sensitive as a scale and is more likely to be affected by factors such as air currents. As a result, the weight of the fruit is more likely to be measured incorrectly, depending on its actual weight.

Therefore, whether weight affects u(μ) depends on the specific measurement error. In general, systematic measurement errors can lead to an increase or decrease in u(μ), while non-systematic measurement errors are less likely to affect u(μ).

To learn more about Mass and weight click:

brainly.com/question/28704035

#SPJ1

The symbolic expression for the magnitude of the current (i) through a resistor can be determined using Ohm's Law, which states that the current flowing through a resistor is directly proportional to the voltage across it and inversely proportional to its resistance.

Mathematically, Ohm's Law can be expressed as: i = V/R

Where:

i is the magnitude of the current flowing through the resistor,

V is the voltage across the resistor, and

R is the resistance of the resistor.

This equation shows that the current (i) is equal to the voltage (V) divided by the resistance (R). Therefore, to calculate the magnitude of the current through a resistor, you need to know the applied voltage and the resistance of the resistor. By substituting these values into the equation, you can find the value of the current.

Learn more about Ohm's Law here

https://brainly.com/question/14296509

#SPJ11

The central peak of the Airy disc contains approximately 85% of the total light energy, while the remaining 15% is spread across the surrounding rings.

The Airy disc refers to the diffraction pattern formed by a star when observed through a telescope. It consists of a central bright spot known as the Airy disc, surrounded by a series of concentric bright rings. The radii of these rings can be determined using the formula for the angular radius of the nth ring, given by θ = 1.22(λ/D), where λ is the wavelength of light and D is the aperture diameter.

In this case, the aperture diameter is 36 inches, which is approximately 0.9144 meters. The wavelength of visible light is typically around 550 nm. Using these values, we can calculate the angular radii of the first, second, and third bright rings.

The amount of light contained in the central part of the Airy disc can be determined by considering the intensity distribution of the diffraction pattern. The central peak of the Airy disc contains approximately 85% of the total light energy, while the remaining 15% is spread across the surrounding rings.

It is important to note that without specific values for the wavelength of light and the desired order of the bright rings, precise calculations for the radii of the rings and the amount of light contained in the central part of the Airy disc cannot be provided.

To learn more about light energy from the given link

https://brainly.com/question/21288390

#SPJ4

If the net force on a 10 kg object is 40 N, we can say that the object will be accelerating at 4 m/s/s. This is because the acceleration of an object is directly proportional to the net force acting on it, and inversely proportional to its mass.

Using the formula F=ma, where F is the net force, m is the mass, and a is the acceleration, we can rearrange the equation to find that a = F/m. In this case, a = 40 N / 10 kg = 4 m/s/s. This means that the object's velocity will increase by 4 m/s every second that it is under the influence of the net force. We cannot determine the object's velocity or speed without knowing more information about its initial state and any other forces acting on it.

To know more about force visit :-

https://brainly.com/question/30507236

#SPJ11

When a small percentage decrease in price produces a larger percentage increase in quantity demanded, the demand is said to be elastic. The correct option is B.

Elasticity of demand refers to the responsiveness of the quantity demanded to a change in price. If a small decrease in price results in a larger increase in quantity demanded, it indicates that consumers are very responsive to changes in price. This means that the demand is elastic.

When a small percentage decrease in price leads to a larger percentage increase in quantity demanded, it indicates that consumers are highly sensitive to price changes. This characteristic of demand is referred to as price elasticity of demand, and in this case, the demand is said to be elastic.

To know more about elastic visit:-

https://brainly.com/question/31995086

#SPJ11

The object is located 30 cm away from the lens, on the opposite side of the lens from the image.

The focal length of a convex lens is positive, so we know that the lens is converging the light. We can use the thin lens formula to relate the distances of the object, image, and lens:
1/f = 1/d_o + 1/d_i
where f is the focal length, d_o is the distance of the object from the lens, and d_i is the distance of the image from the lens. We know f = 15 cm and d_i = 30.0 cm, so we can solve for d_o:
1/15 = 1/d_o + 1/30
Multiplying both sides by 30d_o gives:
2d_o - 30 = d_o
Rearranging gives:
d_o = 30 cm
To know more about focal length, visit:

https://brainly.com/question/31755962

#SPJ11