An ocean liner is cruising at 10 meters/second and is about to approach a stationary ferryboat. A parcel is released from the ocean liner from a height of 5.5 meters above the ferryboat’s deck. Calculate the distance at which the ferryman should position the boat from the point horizontally below the point of release so that the parcel lands inside the boat.

By using uniform motion, the high up the slope will it strike is 730.62 m.

We need to know about uniform motion to solve this problem. The uniform motion is an object's motion under acceleration. It should follow the rule

vt = vo + a . t

vt² = vo² + 2a . s

s = vo . t + 1/2 . a . t²

where vt is final velocity, vo is initial velocity, a is acceleration, t is time and s is displacement.

From the question above, we know that

θ = 70⁰

vi = 200 m/s

x = 300 m

Find the initial velocity in x and y axis

vx = vi cosθ = 68.40 m/s

vy = vi sinθ = 187.94 m/s

Find the time taken to reach 300 m

vx = x / t

68.4 = 300 / t

t = 4.39 second

Find the time taken to reach maximum height

vt = vo + a . t

0 = vy - g . t

vy = gt

187.94 = 9.8 . t

t = 19.18 second

The motion of projectile is raising to maximum height, hence

s = vo . t + 1/2 . a . t²

h = vy . t - 1/2 . g . t²

h = 187.94 . 4.39 - 1/2 . 9.8 . 4.39²

h = 730.62 m

Find more on uniform motion at: https://brainly.com/question/28040370

#SPJ4

The equilibrium temperature is required and to find whether the temperature change can be measured by a thermometer is required. The temperature is 310 K.

A physical measure that describes how hot a substance or radiation is is called temperature.

There are three different types of temperature scales: those, like the SI scale, that are defined in terms of the average translational kinetic energy per freely moving microscopic particle, like an atom, molecule, or electron, in a body; those that only rely on strictly macroscopic properties and thermodynamic principles, like Kelvin's original definition; and those that are defined by practical empirical properties of particulates rather than by theoretical principles.

With a thermometer, temperature is measured. It is calibrated in a number of temperature scales that historically defined themselves using different reference points and thermometric substances. The Celsius scale, originally known as "centigrade," is the most popular scale.

To learn more about temperature  from the given link:

https://brainly.com/question/24746268

#SPJ4

By using uniform motion, the high up the slope will it strike is 730.62 m.

We need to know about uniform motion to solve this problem. The uniform motion is an object's motion under acceleration. It should follow the rule

vt = vo + a . t

vt² = vo² + 2a . s

s = vo . t + 1/2 . a . t²

where vt is final velocity, vo is initial velocity, a is acceleration, t is time and s is displacement.

From the question above, we know that

θ = 70⁰

vi = 200 m/s

x = 300 m

Find the initial velocity in x and y axis

vx = vi cosθ = 68.40 m/s

vy = vi sinθ = 187.94 m/s

Find the time taken to reach 300 m

vx = x / t

68.4 = 300 / t

t = 4.39 second

Find the time taken to reach maximum height

vt = vo + a . t

0 = vy - g . t

vy = gt

187.94 = 9.8 . t

t = 19.18 second

The motion of projectile is raising to maximum height, hence

s = vo . t + 1/2 . a . t²

h = vy . t - 1/2 . g . t²

h = 187.94 . 4.39 - 1/2 . 9.8 . 4.39²

h = 730.62 m

Find more on uniform motion at: https://brainly.com/question/28040370

#SPJ4

gravity created a solar nebula when 99% of the gas and dust materials were gathered into the center of a flattened disc during the formation of the solar system

The explosion of a flattened disc created waves in space that compressed the cloud of gas and dust.  The cloud is all gravitationally bounded together.  

As the cloud continued to fall inward, the center eventually became so hot that it became a star, the Sun, and blew away most of the new solar system's gas and dust with a powerful stellar wind.

This squeeze caused the cloud to begin collapsing as gravity pulled the gas and dust together to form the solar nebula.

For more information on gravity click on the link below:

https://brainly.com/question/940770

#SPJ4

(b) the set of points is in a plane

A circle has points in a plane, a center, a radius, and a diameter. Depending on the situation, at least one of the following words must be included in the definition of a circle:

Based on James' definition of a circle, he needed to specify that the points are in a plane (option b).

The phrase "the set of all the points," as he defines it, has a variety of meanings. among them are:

the set of points on a line.

a plane's set of points.

the region's collection of points

James should have made it clear that the collection of points is in a plane.

Learn more about circles here:

https://brainly.com/question/8952990

#SPJ9

The complete question is mentioned below:

James defines a circle as "the set of all the points equidistant from a given point." His statement is not precise enough

because he should specify that

(a) a circle includes its diameter

(b) the set of points is in a plane

(c) a circle includes its radius

(d) the set of points are collinear

Answer:

450

Explanation:

I think answer is 450.

Antelope's acceleration as it passes the second point is 1.65 m/s².

Speed: The ratio of distance to time can be used to quantify speed. M/s is the S.I. unit of speed.

Newton's equation of motion yields the following: S = (v+u)t/2.

u is the starting speed, v is the final speed, and S is the distance.

Given: v = 16.0 m/s, t = 7.10 s, S = 72 m.

making u the subject of the equation,

7.1(16+u) = 72×2

113.6+7.1u = 144

7.1u = 144-113.6

7.1u = 30.4

u = 30.4/7.1

u = 4.28 m/s

Thus the speed at the first point = 4.28 m/s .

The rate at which velocity changes is known as acceleration. M/s2 is the SI unit of acceleration.

a = (v-u)/t............................ Equation 2: acceleration is given by a.

v = 16.0 m/s, u = 4.28 m/s, and t = 7.10 s are given.

Replace in equation 2

a = (16-4.28)/7.1

a = 11.72/7.10

a = 1.65 m/s²

Thus the acceleration = 1.65 m/s².

To learn more about similar question from the given link:

brainly.com/question/14612339

#SPJ4

The ball will stop after 6 s.

The initial velocity of the ball is u.

u = 0.2 m/s

Acceleration of the ball is a.

a = 0.05 m/s²

The time interval is t.

t = 6 seconds.

The displacement of the ball at time t is s.

The displacement of the ball at time t is,

[tex]s= ut + \frac{1}{2} at ^{2} [/tex]

[tex]s= 0.2 \times 6+ \frac{1}{2} \times ( - 0.05) \times (6)^{2} [/tex]

[tex]s= 0.3 \: m[/tex]

Therefore, the displacement of the ball at time t is 0.3 meters.

The time at which the ball will stop is,

Distance = Speed × Time

0.3 = 0.05 × Time

Time = 6 seconds.

Therefore, the ball will stop after 6 s.

To know more about acceleration, refer to the below link:

https://brainly.com/question/2303856

#SPJ4

The 5.00 grams of oxygen gas (O₂) is the limiting reagent and the mass of aluminum oxide formed is 10.6 g.

The limiting reagent is the reactant that is completely used up in a reaction, and thus determines when the reaction stop.

3O₂ + 4Al  → 2Al₂O₃

combining ratio of the elements;

O = 3

AL = 4

In the reaction above, 5.0 g of oxygen will be completely used, since it has the smaller combining ratio.

3O₂  ---------------> 2Al₂O₃

3(16 x 2) ------> 2(27 x 2   + 16 x 3)

96 ------------------>  204

5 -------------------> ?

= (5 x 204)/96

= 10.6 g

Thus, the 5.00 grams of oxygen gas (O₂) is the limiting reagent and the mass of aluminum oxide formed is 10.6 g.

Learn more about limiting reagent here: https://brainly.com/question/14222359

#SPJ1

You walk in a given direction for 20 m during the first 5 seconds, your average speed is equal to 5m/s

Average speed is determined by dividing the total distance you travelled by the total time, whereas average velocity is determined by dividing your displacement (a vector pointing from your initial position to your end position) by the whole time.

The amount of something that happens or changes in a unit of time is expressed as a rate.

The equation for speed is that Divide the distance an object travels by the time it takes to cover that distance to determine its speed. A unit of distance is divided by a unit of time in the speed equation.

Then Average speed = total distance / total time

= 20 + 15 / 5 + 2

= 35/7

= 5 m/s

The average speed is calculated as 5m/s

To know more about average speed, visit:

https://brainly.com/question/12322912

#SPJ4

The mass of the object is obtained as 130 g.

The triple beam balance is the kind of balance that could be used to measure the mass of a substance. There are so many kinds of balance that could be used in science and these include;

1) beam balance

2) Spring balance
3) unequal arm balance

We read the mass of the object by looking at all the points that we have set on the triple beam balance to achieve the balance point. In the case of the substances that we have seen in the image of the question, the mass of the object is obtained as 130 g.

Learn more about triple beam balance:https://brainly.com/question/11334484

#SPJ1

Based on the problem, the distance between two parallel conducting plate is x=10cm=0.10mx=10cm=0.10m

a)

The potential difference is V= 593VV= 593V

The distance between is d=7.05cm= 0.705md= 7.05cm= 0.705m

Recall the expression for the electric field.

E= VdE= Vd

Substitute the given values in above equation.

E= 5930.705= 841.13V/ mE =5930.705 = 841.13V/Vmm

Thus, the electric field strength is 841.13V/m.841.13V/Vmm.

b)

Recall the term for the voltage between the plate.

ΔV= E× x ΔV= E×x

Substitute the given values in above equation.

ΔV=841.13V/m×0.10m=84.11VΔV=841.13V/Vmm×0.10m=84.11V

Thus, the voltage within the plate is 84.11V.

To learn more about the electric field. visit the link

https://brainly.com/question/15800304

#SPJ4

The required electric field in the equipment is  35.77 * [tex]10^{17}[/tex] N/C.

We know that,

E = F / q

where,

E = Electric field

F = Electric force

q = Charge of electron

Given that,

F = 10e - 14 N = 13.18 N

No. of electrons = 23

q = 23 * 1.602 * [tex]10^{-19}[/tex] = 36.846 * [tex]10^{-19}[/tex] C

E = 13.18 / 36.846 * [tex]10^{-19}[/tex] = 35.77 * [tex]10^{17}[/tex] N / C

Protein electrophoresis is a test used to measure specific proteins in blood. The separation of proteins is based on their electric charge.

To know more about Protein electrophoresis

https://brainly.com/question/14367268

#SPJ4

A girl delivering newspapers covers her route by traveling so resultant displacement is 5 blocks.

Her net x (east-west) displacement is –3.00+0+6.00= +3.00 blocks, while her net y (north-south) displacement is 0+4.00+0=+4.00 blocks.

The magnitude of the resultant displacement is

R= [tex]\sqrt{x^{2} +y^{2} } =\sqrt{3^{2} + 4^{2} }[/tex] = 5 blocks

and the angle made by the resultant

= [tex]\theta[/tex] = [tex]tan^{-2} =[/tex] 4/3

= 53.1°

The resultant displacement is 5 blocks at 53.1°

The term “displacement” refers to a shift in an object’s position. It is a vector quantity with a magnitude and direction. The symbol for it is an arrow pointing from the initial location to the ending place.

For instance, if an object shifts from location A to position B, its position changes.

An object’s displacement is equal to its velocity times its acceleration times its time squared plus one-half (t2).

A scalar quantity known as distance measures “how much ground an object has traversed” while moving.

The term “how far out of place an object is” is referred to as displacement, a vector quantity.

To know more about displacement visit:

https://brainly.com/question/11934397

#SPJ4

The magnitude of the acceleration of the block at this instant is 1.11m/s².

Given here the dimension of the block 1×2×3m, so the volume = l×b×h =6m3 and density = 600kg/m³

Mass of the block can be calculated as, m= volume × density = 600×6=3600kg.

Now, we calculate magnitude of force which is given by,

∑Force = F buoyant – ∑F drag- ∑F gravity

Force = 6×104 -2×104 – 3600× 9.8 =3600 ×a

On calculating this, we get

a= 1.11m/s².

Thus, the magnitude of acceleration is found to be 1.11m/s².

Buoyant force, is an upward force applied by a fluid against the weight of an object that is partially or completely submerged. The weight of the fluid on top causes pressure in a fluid column to rise with depth. If the buoyant force acting on an object is greater than the gravitational force then object will float, if gravitational force is greater than buoyant force then object will sink or drown.

To learn more about buoyant force, refer this link.

https://brainly.com/question/11884584

#SPJ4

The resistivity of the materials must be constructed  in ratio A₂ = 2A.

The resistance of a wire can be defined as

R = ρL/A

Where,

ρ is Resistivity

L is Length of the conductor

A is Area of cross section of the conductor.

R₁/R₂ = (L₁/L₂) × (A₂/A₁)  ----> rearranging it for A

A₂ = (R₁/R₂) × (L₂/L₁) × A₁  

A₂ = (R/R) × (2L/L) × A  

A₂ = 2A

Therefore, cross section area of another conductor must be 2A.

The strength with which a substance resists electric current is known as electrical resistivity, which is a fundamental attribute of materials. A substance that permits electric current to flow easily has a low resistance. The Greek letter is often used to symbolize resistivity. The ohm-meter is the SI unit used to measure electrical resistivity.

A substance's ability to resist the flow of current, or electrons, can be characterized as a physical attribute. A specific substance with specific dimensions is distinguished by its physical property of resistivity.

To learn more about Resistivity from the given link:

brainly.com/question/11431009

#SPJ4

Surface Charge density on each plate  sigma =+- Q/a = +4.9×10²⁴/4.6×10⁻²C/m² and Electric field is found to be 0.12×10³⁸N/C.

Given, here the cross sectional area of the conducting plate (A)

A = 460 cm² = 460 x 10-4 m² = 4.6 x10-²m² and distance between plate, d = 4.0 cm = 4x10² m²

Charge on the plate, Q = ne ,where n= 1×10¹²

Q = ± 10¹² x4.9x 10¹²c = ± 4.9x 10²⁴ c

Now, we have to find charge density on each plate  sigma =+- Q/a = +4.9×10²⁴/4.6×10⁻² C/m²

σ= 1.09× 10²⁶ C/m²

Now we have to find electric field between the plates.

E= σ /E°= 1.09× 10²⁶/ 8.85×10⁻¹²

E= 0.12×1038N/C

Charge density is a measure of the amount of electric charge present in a space per unit volume in one, two, or three dimensions. The quantity of electric charge per surface area or volume, respectively, is known as the linear surface or volume charge density.

To learn more about charge density, refer this link.

https://brainly.com/question/15080316

#SPJ4

They have a lower-than-normal magnifying power. is the correct answer.

Whatever your objective, a binocular tripod enables you to focus and stay there regardless of the wind or other environmental circumstances. You can see various regions simultaneously by using a tripod to hold several lenses in focus at once. Work your way down from the top of your head to get the appropriate tripod height. About four to five inches separate your eyes from the top of your head. The tripod head is roughly 4 to 4.5 inches high, and the telescopic eyepiece is about 4 inches above the bottom of the mount plate.

learn more about telescopic here-

https://brainly.com/question/556195

#SPJ9

The y-component of the vector is 13.24 m.

Vector components allow us to break a single vector quantity into two or more scalar quantities with which we have more mathematical experience.

The two component of a vector include;

The component of a vector that acts in horizontal direction is known as x-component of the vector.

The component of a vector that acts in vertical direction is known as y-component of the vector.

The y-component of the vector is calculated as follows;

Vy = V sinθ

Vy = 55.1 m x sin(13.9)

Vy = 13.24 m

Thus, the y-component of the vector is 13.24 m.

Learn more about y-component of the vectors here: brainly.com/question/24116614

#SPJ1

The complete question is below:

a vector is 55.1 m long pointing in a 13.9 degree angle. Find the y-component of the vector.

the frequency of each wavelength of electromagnetic radiation is

A)frequency of wavelength 632.8nm(red light from helium–neon laser)

is 4.738×10¹⁴ s⁻¹

B)frequency of wavelength 503 nm (maximum solar radiation)

is5.960×10¹⁴ s⁻¹

C)frequency of wavelength 0.052nm (medical x-rays)

is5.765×10¹⁸s⁻¹

A)

632.8 nm (wavelength of red light from helium–neon laser)

1 nm = 10⁻⁹ m

632.8 nm = 632.8×10⁻⁹ m = 6.328×10⁻⁷ m

The speed of light is c = 2.998×10⁸ m/s

λ = 6.328×10⁻⁷ m

the frequency can be calculated as

ƒ = c / λ

ƒ = (2.998×10⁸m/s) / (6.328×10⁻⁷ m)

ƒ = 4.738×10¹⁴ s⁻¹

frequency of wavelength 632.8nm is 4.738×10¹⁴ s⁻¹

B)

503 nm (wavelength of maximum solar radiation)

1 nm = 10⁻⁹ m

503 nm = 503×10⁻⁹m = 5.03×10⁻⁷ m

c = 2.998×10⁸ m/s

λ = 5.03×10⁻⁷ m

the frequency can be calculated as;

ƒ = c / λ

ƒ = (2.998×10⁸ m/s) / (5.03×10⁻⁷m)

ƒ = 5.960×10¹⁴ s⁻¹

frequency of wavelength 503 nm is5.960×10¹⁴ s⁻¹

C)

0.052 nm (wavelength contained in medical x-rays)

1 nm = 10⁻⁹ m

0.0520 nm = 0.0520×10⁻⁹ m = 5.20×10⁻¹¹m

Where the speed of light is

c = 2.998×10⁸ m/s

λ = 5.20×10⁻¹¹ m

the frequency can be calculated as

ƒ = c / λ

ƒ = (2.998×10⁸ m/s) / (5.20×10⁻¹¹ m)

ƒ = 5.765×10¹⁸s⁻¹

frequency of wavelength 0.052nm is5.765×10¹⁸s⁻¹

A)frequency of wavelength 632.8nm(red light from helium–neon laser)

is 4.738×10¹⁴ s⁻¹

B)frequency of wavelength 503 nm (maximum solar radiation)

is5.960×10¹⁴ s⁻¹

C)frequency of wavelength 0.052nm (medical x-rays)

is5.765×10¹⁸s⁻¹

To know more about frequency

https://brainly.com/question/5171334

#SPJ4

Answer: Initial velocity is independent of the slope of the graph; that is, the acceleration. An object thrown downward still accelerates after release at the same rate as an object that is dropped.

Explanation: hope this helps

No.

A stone has the SAME acceleration whether you throw it down, throw it up, throw it sideways, or just drop it.

YOU decide the stone's initial velocity, but it always has the same acceleration after it leaves your hand.

The negatively charged electric plate is avoided in favor of the positively charged electric plate by the cathode ray. Thomson was able to estimate the mass-to-charge ratio of the particles by measuring the degree to which the ray was refracted by a magnetic field.

What property of the electron did Thomson measure?

The negatively charged electric plate is avoided in favor of the positively charged electric plate by the cathode ray. Thomson was able to estimate the mass-to-charge ratio of the particles by measuring the degree to which the ray was refracted by a magnetic field.

To learn more about J.J. Thomson, refer to:

https://brainly.com/question/15361325

#SPJ4

The car in a time of 4 seconds will travel a distance of: 32 m

The formulas for uniformly varied rectilinear motion (UVRM) and procedures we will use to solve this exercise are:

Where:

Information about the problem:

Applying the acceleration formula we have:

a = (vf - vi) /t

a = (0 m/s - 16 m/s) /4 s

a = (-16 m/s) /4 s

a = -4 m/s²

Acceleration is negative because the car is decelerating

Applying the distance formula, we get:

x = (vf²-vi²)/ (2a)

x = [(0 m/s)²- (16 m/s)²]/ (2 * -4 m/s²)

x = (0 m²/s²- 256 m²/s²)/ -8 m/s²

x =  -256 m²/s²/ -8 m/s²

x = 32 m

It is a physical quantity that indicates the variation of velocity as a function of time, it is expressed in units of distance per time squared e.g.: m/sec2 ; km/h2

Learn more about acceleration at: brainly.com/question/14344386

#SPJ4

If the starship drops the engine force output to 3000 N of force he ship's acceleration going to be at acceleration, a = 4.28 m/s².

In the given equation we can see the different force working on engine so,

To find the acceleration first we need the mass of engine

Using formula,

F = m x v

10,000 - 3000 N = m x 10 m/s

7000N = m x 10 m/s

m = 700 kg

Now as we have mass of the engine,

By the formula,

a = F / m

F = 3000 N

m = 700 kg

So, putting values we have :

a = 3000 / 700

a = 4.28 m/s²

To know more about force :

https://brainly.com/question/26115859

#SPJ9

Im confused on your questions, however they both need each other to work :D

Answer:

Photosynthesis and cellular respiration are processes by which plants and animals use to create energy from food.

Photosynthesis is exclusive to plants only though. It starts with sunlight which goes through the Electron Transport Chains (ETC's) and then through a cycle known as the Calvin-Benson cycle to create glucose.

Cellular respiration (cell resp) takes the glucose made in photosynthesis (or in the case of humans, from our food) and takes it through the Krebs cycle (sometimes referred to as the Citric Acid cycle) to create Adenosine Triphosphate (ATP) which is used to give us energy.

Hope that helps.

Taking into account the definition of Avogadro's Number, 5.029×10²⁴ atoms of zinc are in 8.35 moles.

Avogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole. Avogadro's number applies to any substance.

Then you can apply the following rule of three: If 1 mole of zinc contains 6.023×10²³ atoms, 8.35 moles of zinc contains how many atoms?

amount of atoms of zinc= (6.023×10²³ atoms× 8.35 moles)÷ 1 mole

amount of atoms of zinc= 5.029×10²⁴ atoms

Finally, 5.029×10²⁴ atoms of zinc are in 8.35 moles.

Learn more about Avogadro's Number:

brainly.com/question/11907018

brainly.com/question/1445383

brainly.com/question/1528951

#SPJ1

The answer is hang glider.

In high school, I created a project for a similar experiment that was accepted.

It matters what you carry the egg in because it is an egg, so something cushioned.

Use the fabric and cut the paper bag to make the kind of parachute I mentioned before.

When people go sky divining, they use a specific kind of parachute because the design is supposed to slow the fall and give them a chance to make a safe landing.

To learn more about hang glider, refer

https://brainly.com/question/2374318

#SPJ4

The major problem in a least developed country according to me is probably the low per capita income.

The problems that a less developed country faces are:

A lot of these countries have poor infrastructure for other sectors than primary sector ( Eg. Agriculture, fishing etc. ). This results in exploitation of natural resources with less per capita income ( Amount of money earned per person in a region ). This leads to crippling debts, not just as a person, but as a whole nation.

Therefore, the major problem in a least developed country is probably the low per capita income.

To know more about less developed country

https://brainly.com/question/14927048

#SPJ1

After conversion into cartesian coordinates, we can write the position vectors as -

a) → r = 12.4 m , θ = 170°    ↔     - 12.21 i + 2.15 j

b) → r = 4 cm , θ = 50°   ↔    2.57 i + 3.06 j

c) → r = 20 inches , θ = 210°   ↔    - 17.32 i - 10 j

Cartesian coordinates are two-dimensional coordinates which are used to represent a point in X-Y plane. They are, in general, written in the form (x, y),  such that x is the horizontal distance of point from origin and y is the vertical distance of point from origin.

Given are the position vectors in polar coordinates of three points in X-Y coordinate system.

It is important to remember the following relations, in order to transform from polar coordinates (r, θ) into cartesian coordinates (x, y) -

x = r cosθ

y = r sinθ

a) → r = 12.4 m , θ = 170°

x = 12.4 x cos (170°) = 12.4 x -0.98480775301 = -12 .21

y = 12.4 x sin (170°) = 12.4 x 0.17364817766 = 2.15

In cartesian form → ( -12.21 i + 2.15 j )

b) → r = 4 cm , θ = 50°

x = 4 x cos (50°) = 4 x 0.64278760968 = 2.57

y = 4 x sin (170°) = 4 x 0.76604444311 = 3.06

In cartesian form → ( 2.57 i + 3.06 j )

c) → r = 20 inches , θ = 210°

x = 20 x cos (210°) = 20 x -0.86602540378 = -17.32

y = 20 x sin (210°) = 20 x -0.5= -10

In cartesian form → ( -17.32 i - 10 j )

Therefore, in two - Dimensional cartesian system, we can write the position vectors as -

a) → r = 12.4 m , θ = 170°    ↔     - 12.21 i + 2.15 j

b) → r = 4 cm , θ = 50°   ↔    2.57 i + 3.06 j

c) → r = 20 inches , θ = 210°   ↔    - 17.32 i - 10 j

To solve more questions on polar to cartesian transformation, visit the link below-

https://brainly.com/question/15215968

#SPJ1