acid+base->salt+water
What type of reaction is this?​

Answer:

0.05859091769326505 moles Mn203

Explanation:

Answer:

Explanation:

Thus, if we have 6.022 × 10 23 O atoms, we say we have 1 mol of O atoms. If we have 2 mol of Na atoms, we have 2 × (6.022 × 10 23) Na atoms, or 1.2044 × 10 24 Na atoms. Similarly, if we have 0.5 mol of benzene (C 6H 6) molecules, we have 0.5 × (6.022 × 10 23) C 6H 6 molecules, or 3.011 × 10 23 C 6H 6 molecules.

For example the atomic mass of methane (CH4)is 12 amu for the carbon plus 4 x 1 amu for the four hydrogens, for a total of 16 amu. Therefore the molar mass of methane is 16g. We say that one mole of methane has a mass of 16 g, and that there are 6.022 x 1023 atoms in that mass of methane.

The number of atoms present in 0.75 mole of methane, CH₄ is 4.515×10²³ atoms

1 mole of CH₄ = 6.02×10²³ atoms

From Avogadro's hypothesis, we discovered that:

1 mole of CH₄ = 6.02×10²³ atoms

Therefore,

0.75 mole of CH₄ = 0.75 × 6.02×10²³

0.75 mole of CH₄ = 4.515×10²³ atoms

Thus, 4.515×10²³ atoms are present in 0.75 mole of CH₄

Learn more about Avogadro's number:

https://brainly.com/question/26141731

#SPJ2

Answer:

They may have different phenotypes because of differences in their environments, such as nutrition and healthcare. Why might genetically identical twins have different phenotypes?  Any genes on the same chromosome could be linked genes, whereas only genes on sex chromosomes can be sex-linked genes.

Explanation:

Due to the effects of the environment, genetically identical twins might have different phenotype.

The qualities or visible characteristics of an organism are its phenotype. It depends on how the environment and the genotype, or genetic code, of the organism interact.

Although human monozygotic twins as well as other genetically identical species may share startling physical similarities, they frequently differ in key characteristics, such as complicated diseases. The effects of the environment have generally been blamed for this variance across organisms with essentially identical chromosomal DNA sequences.

Therefore, due to the effects of the environment, genetically identical twins might have different phenotype.

To know more about phenotype, here:

https://brainly.com/question/11197451

#SPJ2

Answer:

Homologous chromosome

Answer:

It's A

Explanation:

Animals get the nitrogen they need by eating plants or other animals that contain nitrogen. When organisms die, their bodies decompose bringing the nitrogen into soil on land or into ocean water. Bacteria alter the nitrogen into a form that plants are able to use.

Answer:

Mobiles are made from many non-renewable materials which have been extracted from the earth – such as: Metals. Plastics.

Explanation:

Answer: they are made from many metals,plastics. etc...

Explanation:

they also aren't bio-degradeable so they're also harmful for the environment.

Answer:

15 moles  of CO₂

Explanation:

Given data:

Number of formula units = 8.9 ×10²⁴ formula units

Number of moles of CO₂ = ?

Solution:

The given problem will solve by using Avogadro number.

The number 6.022 × 10²³ is called Avogadro number.

1 mole = 6.022 × 10²³ formula units

8.9 ×10²⁴ formula units  × 1mol / 6.022 × 10²³ formula units

1.5 mol ×10¹ mol

15 moles  

Answer:

All the answers you chose are correct

Explanation:

Answer:

I cant see the fist question but all that you chose are correct

Explanation:

Answer:

The melting/boiling point of a substance determines what state of matter it takes at a certain temperature.

In Cl2 there are covalent bonds between the atoms forming simple molecules. There are weak attractions between molecules of Cl2 meaning little energy is needed to break these forces of attraction and therefore Cl2 has a low boiling point.

NaCl on the other hand has strong electrostatic forces of attraction between the positvely charged Na ion and the negatively charged Cl ion. NaCl forms a giant ionic lattice that requires high amounts of energy to break and therefore has a high melting point.

Moles of Iron : 1.01

Given

Reaction

Fe2O3 + 3CO → 2Fe + 3CO2

34 liters of CO

Required

moles of Iron

Solution

Assumed at STP

Conditions at T 0 ° C and P 1 atm are stated by STP (Standard Temperature and Pressure). At STP, Vm is 22.4 liters / mol.

so for 34 L :

= 34 : 22.4

= 1.518 moles

From the equation, mol Fe :

= 2/3 x moles CO

= 2/3 x 1.518

= 1.01 moles

Answer:

A tomato plant use photosynthesis to make food

Explanation:

Answer:

add baking soda maybe

Explanation:

Answer and Explanation

__________________________________________________________

All of the Information below is not owned by me, it is owned by CCBCMD.

__________________________________________________________

Colas are also carbonated beverages. The carbonation can produce some carbonic acid in the  Cola, which would affect your results. Therefore, to ensure that you are only titrating the  phosphoric acid you will use de-carbonated soda. This can easily be obtained by gently  heating the soda, or as you may already know, by rapidly shaking the bottle. It is also important that we do not use diet Colas since the artificial sweeteners that they contain have  acidic functional groups that will also interfere with the titration.

__________________________________________________________

Use a 25.00-mL pipet to deliver exactly 25.00 mL of room temperature, de-carbonated

Cola into a 250-mL beaker. Check out a magnetic stir bar and gently add it to the

beaker. Place the beaker on a stir plate. Set up a pH meter so that the probe is   completely immersed, but in a way that the stir bar will not hit it. The tip of the probe

has a thin glass membrane. Handle it with care! Position the beaker so that the stir bar

is as close to the center of the beaker as possible for optimal stirring. It should stir

rapidly enough to ensure thorough mixing but not so rapidly as to cause splattering.

__________________________________________________________

Obtain about 75 mL of 0.0100 M NaOH in a beaker. Use this NaOH to fill a buret.

Remember that you should always rinse a buret 2-3 times with the solution that you are

about to put into it and remove air bubbles at the buret tip. If you do not remember how

The initial level of the NaOH should be at exactly

0.00 mL. Once the buret is ready, place it over the beaker containing the Cola

__________________________________________________________

Hope this helps! <3

__________________________________________________________

Answer:

true <3

Explanation:

Answer:

all of them

Explanation:

took test

Floods can cause soil erosion and sedimentation. It will destroy all the properties of human beings. All the options are correct. Thus the correct option is D.

Flood is defined as a natural disaster which results from the overflow of water on land. It is mainly generated by the heavy rainfall, sudden snow melt, etc. It affect the ecosystem adversely.

The floods are mostly affected to the coastal regions. It is even a threat to life of people. The habitat of aquatic organisms are destructed by the floods. The ground water is found to be contaminated with pathogenic microbes and causes water borne diseases.

As a result of floods the life of small insects which play a primary role in the ecosystem of food chain is also affected. All fields like education, communication, transport, etc. of our state is affected by the floods.

The floods can cause loss of people, low water quality, destruction of habitats. Some times the effect of flood in our life will be long lasting.

Thus the correct option is D.

To know more about Flood, visit;

https://brainly.com/question/28725721

#SPJ6

Answer:

Here is your ans

Explanation:

potassium mass is 39.0983u

Tq

Answer:

abcdefghijklmnopqrstuvwxyz

Explanation:

I pooped the bed last night when I farted

The orbital filling and electron configuration are based on various principles. The Aufbau principle states that electrons fill the orbital from lowest to highest energy levels. Thus, option A is correct.

The Aufbau principle is the rule that states about the filling of the electron in the various orbitals of an atom. It defines the filling of the lower atomic orbitals before the higher levels are filled.

This principle allows for determining the electronic configuration of the atom. The rule states that the electron first occupies the lowest energetically unrestricted orbits that can hold a certain number of electrons. The electron can only move to a higher level when the electron is filled in the previous subshell.

Therefore, option A. the Aufbau principle gave the filling of electrons in the lowest energy level.

Learn more about the Aufbau principle here:

https://brainly.com/question/15006708

#SPJ6

Answer:

-175.15

Explanation:

1.0 °C = 274.15 K

2.0 °C = 275.15 K

3.0 °C = 276.15 K

4.0 °C = 277.15 K

5.0 °C = 278.15 K

6.0 °C = 279.15 K

7.0 °C = 280.15 K

8.0 °C = 281.15 K

9.0 °C = 282.15 K

Answer:

No bcz it is insulator it will not conduct electric

the second one i think, hope this helps

Answer:

 a

Explanation:

Answer:

77460 g

Explanation:

To solve this problem first we convert molecules into moles, using Avogadro's number:

3.47x10²⁶ molecules ÷ 6.023x10²³ molecules/mol = 576.12 moles

Then we convert 576.12 CuCl₂ moles into grams, using its molar mass:

576.12 mol * 134.45 g/mol = 77460 g

So the answer is 77460 g, or 77.46 kg.

Volume of H2 produced = 57.6576 L

Given

23.17 g Be

Required

Volume of H2

Solution

Reaction

Be(s)+H2O(g)→BeO(s)+H2(g)

mol Be :

= 23.17 g : 9 g/mol

= 2.574

From the equation, mol H2 : mol Be = 1 : 1, so mol H2 = 2.574

Volume H2(assumed at STP, 1 mol=22.4 L) :

= 2.574 x 22.4 L

= 57.6576 L

Answer:

The density of substance A is more.

Explanation:

Given that,

The density of a substance is 5.4 g/cm³.

The density of another substance is 5.4 kg/m³.

We need to find a substance that has a greater density.

First, we make the units the same.

1 kg = 1000 g

1 m = 100 cm

5.4 kg/m³ = 0.0054 g/cm³

Now, if we compare 5.4 g/cm³ and 0.0054 g/cm³, we find that the density of substance A is more.

Answer:

To name an ionic compound, you simply need to find the names  of the cation and anion present in the compound and make sure to revise the ends of metal names as needed. First, write out the name of the metal, followed by the name of the non-metal with its new ending.

Explanation:

Write the name of the cation, and then write the name of the anion, changing the ending to "-ide" if it's a single element and leaving it as it is if it's a polyatomic ion.

Answer:eighter a b or c

nah i am playing it is a

Explanation:

Answer:

A is correct i took the quiz

Explanation: