Calculate 1.4 + 15 + 7.15 +8.003 using the proper number of significant figures. 32 31.55 O 31.550 31.553 31.6​

Calculate 1.4 + 15 + 7.15 +8.003 Using The Proper Number Of Significant Figures. 32 31.55 O 31.550 31.553

Answers

Answer 1

The result of the calculation to the proper number of significant figures will be 31.6.

Addition operation to a proper significant figure

There are certain rules guiding significant figures in mathematical operations.

When it comes to performing an addition or subtraction operation, the significant figure of the final answer takes cognizance of the participating number in the operation with the lowest significant figure after the decimal. The number of significant digits is then applied to the final answer, after its decimal.In division of multiplication operations, the figure with the lowest significant digits determines the significant digits of the final answer.

Following the first rule:

1.4 + 15 + 7.15 + 8.003 = 31.553

The participating number with the lowest significant digit after the decimal is 1.4 with just one significant digit. Thus, the final answer would be 31.6.

More on significant digits can be found here: https://brainly.com/question/1658998

#SPJ1


Related Questions

Why do we need to be curious?

in your own sentence​

Answers

Answer:

Well, there are a few reasons to be curious..

Being curious can: Keep your mind active instead of passive.

Keeps your mind observant on new ideas.

It also opens up new possibilities and keeps you creative.

You can have more excitement and mysteries in life!

Explanation:

Answer: I think you need to be curious because that is how we explore things. Many people find things interesting and if you don't inspect basically you will never learn to question right or wrong things.

Explanation:

if you react 28 grams of butene with excess hydrogen how many grams of butane would you expect to get

Answers

Answer:

The correct answer is 29 grams.

Explanation:

Based on the given question, the reaction will be,

CH3CH=CHCH3 + H2 ⇒ CH3CH2CH2CH3

The molecular weight of butene is 56 grams per mole, and the molecular weight of butane is 58 grams per mole.

Thus, it can be said that 56 grams of butene reacts with hydrogen gas and produces 58 grams of butane.

Therefore, 28 grams of butene when reacts with hydrogen gas to give,

= 58/56 * 28 = 29 grams of butane.

Hence, the mass of butane produced will be 29 grams.

What is the mass of 1.52 mol of the element
chlorine (Cl)?
Answer in units of g. HELP!!!!!!

Answers

Answer:

53.96g

Explanation:

Given parameters:

Number of moles  = 1.52mole

Unknown:

Mass of the given mole  = ?

Solution:

The given element is chlorine;

        Mass of chlorine  = number of moles x molar mass

 Molar mass of chlorine  = 35.5g/mol

   So;

        Mass of chlorine  = 1.52 x 35.5 = 53.96g

Do grasshoppers have wings

Answers

Answer: yes

Explanation: I feed grasshoppers to frogs

Yes, all grasshoppers have wings, but they can’t fly, their wings make them jump higher

Please help me I need these answers

Answers

Answer:

Q8) True

Q9) First ionization energy

Q10) Metal oxides

Explanation:

A common property of group one elements (alkali metals) is their combination with water to form basic solutions. E.g 2K(s)+2H2O(l)→2KOH(aq)+H2​(g).

The distance of the outermost electron in the atom from the nucleus is inversely related to the first ionization energy. As the distance between the outermost electron and the nucleus in group 17 elements gets larger, the corresponding first ionization energies of elements in the group gets smaller.

Group 1 elements can combine with oxygen to give metal oxides. E.g  4K + O2 --> 2 K2O

invenstigatory project potato battery research questions

Answers

Answer:

My hypothesis is that: If the electrolyte source is changed (potato, apple, lime, lemon), then the production of energy (measured in volts) using a lemon will produce the highest voltage because the acid content in the fruit or vegetable will produce electricity when in contact with the electrodes (both zinc and copper

Explanation:


Does you have more momentun when you are running 3 km/hr or when you are walking 1 km/hr? Explain your answer

Answers

3 km/h

formula for momentum = mass x velocity

explain how to convert the moles to litters and litters to moles

Answers

Converting from volume (liters) to moles: Divide your initial volume by the molar volume constant, 22.4 L. Converting from moles to volume (liters): Multiply your mole value by the molar volume constant, 22.4L.

How many valence electrons does nitrogen atom have

Answers

Answer:

5 valence electrons

Explanation:

Answer:

5 electrons

Explanation:

Because atomic number of Nitrogen is 7 total 7 electrons are present 2 in first shell and 5 in valence shell

So these 5 electrons are known as valence electrons

HELP HELP !!
All stimuli must be sent to ur brain for a response to occur
true or false?

Answers

I think it is true but don’t count on me

Describe the preparation of
2.ool of o. 108M Bacl2 from
Bacl2.2HO (244.3 /mol)​

Answers

Answer:

We have to weigh 52.8 g of BaCl₂·2H₂O, add it to a 2.00 L flask and add water until reaching the final volume.

Explanation:

Describe the preparation of 2.00 L of 0.108 M BaCl₂ from BaCl₂·2H₂O. (244.3 g/mol).

Step 1: Calculate the moles of BaCl₂

We need to prepare 2.00 L of a solution that contains 0.108 moles of BaCl₂ per liter of solution.

2.00 L × 0.108 mol/L = 0.216 mol

Step 2: Calculate the moles of BaCl₂·2H₂O that contain 0.216 moles of BaCl₂

The molar ratio of BaCl₂·2H₂O to BaCl₂ is 1:1. The moles of BaCl₂·2H₂O required are 1/1 × 0.216 mol = 0.216 mol.

Step 3: Calculate the mass corresponding to 0.216 mol of BaCl₂·2H₂O

The molar mass of BaCl₂·2H₂O is 244.3 g/mol.

0.216 mol × 244.3 g/mol = 52.8 g

We have to weigh 52.8 g of BaCl₂·2H₂O, add it to a 2.00 L flask and add water until reaching the final volume.

(01.05 LC)
Which of the following is an example of a chemical change? (4 points)
Select one:
O
a.Boiling water
b.Burning paper
c. Dissolving sugar in water
d.Melting gold

Answers

the answer is burning paper

who was the modern astronomer who provided insight into inertia through careful experiments

Answers

The modern astronomer who provided insight into the physical phenomena of inertia through careful experiments was Galileo Galilei, who showed by empirical evidence the heliocentrism to left in the past the erroneous earthcentrism idea.

Who was Galileo Galilei?

Galileo Galilei was one of the most important astronomers in history who showed through careful experimentation that the Earth orbit around the Sun, which is known as heliocentrism.

In conclusion, the modern astronomer who provided insight into the physical phenomena of inertia through careful experiments was Galileo Galilei, who showed by empirical evidence the heliocentrism to left in the past the erroneous earthcentrism idea.

Learn more about Galileo Galilei here:

https://brainly.com/question/1074733

#SPJ1

51. The radius of gold is 144 pm and the density is 19.32 g/cm3. Does elemental gold have a face-centered cubic structure or a body-centered cubic structure

Answers

Answer:

Elemental gold to have a Face-centered cubic structure.

Explanation:

From the information given:

Radius of gold = 144 pm

Its density = 19.32 g/cm³

Assuming the structure is a face-centered cubic structure, we can determine the density of the crystal by using the following:

[tex]a = \sqrt{8} r[/tex]

[tex]a = \sqrt{8} \times 144 pm[/tex]

a = 407 pm

In a unit cell, Volume (V) = a³

V = (407 pm)³

V = 6.74 × 10⁷ pm³

V = 6.74 × 10⁻²³ cm³

Recall that:

Net no. of an atom in an FCC unit cell = 4

Thus;

[tex]density = \dfrac{mass}{volume}[/tex]

[tex]density = \dfrac{ 4 \ atm ( 196.97 \ g/mol) (\dfrac{1 \ mol }{6.022 \times 10^{23} \ atoms})}{6.74 \times 10^{-23} \ cm^3}[/tex]

density d = 19.41 g/cm³

Similarly; For a  body-centered cubic structure

[tex]r = \dfrac{\sqrt{3}}{4}a[/tex]

where;

r = 144

[tex]144 = \dfrac{\sqrt{3}}{4}a[/tex]

[tex]a = \dfrac{144 \times 4}{\sqrt{3}}[/tex]

a = 332.56 pm

In a unit cell, Volume V = a³

V = (332.56 pm)³

V = 3.68 × 10⁷ pm³

V  3.68 × 10⁻²³   cm³

Recall that:

Net no. of atoms in BCC cell = 2

[tex]density = \dfrac{mass}{volume}[/tex]

[tex]density = \dfrac{ 2 \ atm ( 196.97 \ g/mol) (\dfrac{1 \ mol }{6.022 \times 10^{23} \ atoms})}{3.68 \times 10^{-23} \ cm^3}[/tex]

density =17.78 g/cm³

From the two calculate densities, we will realize that the density in the face-centered cubic structure is closer to the given density.

This makes the elemental gold to have a Face-centered cubic structure.

the specific heat capacity of water is 1 cal/gc how much heat in calories is released when 25.7 of water is cooled from 85 to 49

Answers

Answer:

The amount of heat that is released is -925.2 cal

Explanation:

Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.

Sensible heat is the amount of heat that a body can receive or release without affecting its molecular structure, that is, it does not change the state (solid, liquid, gaseous).  In other words, sensible heat is the amount of heat that a body absorbs or releases without any changes in its physical state.

The equation that allows to calculate heat exchanges is:

Q = c * m * ΔT

Where Q is the heat exchanged by a body of mass m, constituted by a substance of specific heat c and where ΔT is the variation in temperature.

In this case:

c= 1 [tex]\frac{cal}{g*C}[/tex]m= 25.7 gΔT= Tfinal - Tinitial= 49 °C - 85 °C= -36 °C

Replacing:

Q= 1 [tex]\frac{cal}{g*C}[/tex] *25.7 g* (-36 C)

Solving:

Q= -925.2 cal

The amount of heat that is released is -925.2 cal

Balance the following SYNTHESIS chemical reaction with the correct coefficients:

___Al (s) + ___S (s) --> ___Al2S3 (s)

a
1, 2, 3
b
2, 3, 1
c
1, 1, 2
d
3, 2, 1

Answers

Answer:

b 2,3,1

Explanation:

2 Al + 3 S ----> Al2S3

pls help me this is hard aaaaa

Answers

The mass of the aluminum sample is 52 g.

Mass of the aluminum

The mass of the aluminum is determined by applying the principle of conservation of energy as shown below.

heat lost by aluminum = heat gained by water

m₁c₁Δθ₁ = m₂c₂Δθ₂

where;

m₁ is mass of aluminumm₂ is mass of waterc₁ is specific heat capacity of aluminumc₂ is specific heat capacity of water = 4.186 J/g⁰CΔθ₁  is change in temperature of aluminumΔθ₂ is change in temperature of water

m₁(0.897)(93.2 - 17.8) = (300)(4.186)(17.8 - 15)

m₁(0.897)(75.4) = (300)(4.186)(2.8)

67.634m₁ = 3516.24

m₁ = 3516.24/67.634

m₁ = 52 g

Thus, the mass of the aluminum sample is 52 g.

Learn more about heat capacity  here: https://brainly.com/question/16559442

#SPJ1

What did the Bohr model assume about the motion of electrons?
A. All electrons move in a circular orbit around the nucleus.
B. Electrons do not have a specific path around the nucleus.
C. All electrons move in a single cloud layer around the nucleus.
D. Electrons always remain in the same location around a nucleus.

Answers

Answer:

A

Explanation:

Bohr proposed that an electron is found only in specific circular paths, or orbits, around the nucleus

Which best describes how magnesium (Mg) and oxygen (O) bond?

a
They form an ionic bond by exchanging two electrons.

b
They form an ionic bond by exchanging three electrons.

c
They form a covalent bond by sharing one electron.

d
They form a covalent bond by sharing four electrons.

Answers

Answer:

a

They form an ionic bond by exchanging two electrons.

Explanation:

Magnesium loses two electrons and oxygen gains these electrons so ionic bond is formed

The statement that best describes how magnesium (Mg) and oxygen (O) bond is, "they form an ionic bond by exchanging two electrons." This is further explained below.

What is bonding?

Generally, bonding is the process of firmly connecting items together using adhesive, heat, pressure, or chemical bonding.

In conclusion, When magnesium (Mg) and oxygen (O) bond, they form an ionic bond by exchanging two electrons

Read more about Bonding

https://brainly.com/question/819068

#SPJ2

What process do you think occurred in stars and supernovae to produce the atoms that make up everything on Earth?

Answers

Answer:

A big star collapsing creates a shock wave that can trigger fusion events in the star's outer shell, which is how I believe the process that took place in stars and supernovae to form the atoms that make up everything on Earth happened. Nucleosynthesis is the process by which these fusion processes produce new atomic nuclei. One of the primary sources of the universe's heavy elements is thought to be supernovae. It is possible to synthesize materials heavier than iron, such as uranium and gold, during a supernova because the star emits enormous amounts of energy and neutrons. All of these components are launched into space during the supernova explosion.

A model shows that the moon has grown to twice its size, yet it has remained in the same place. In one to two sentences, explain how this would impact the gravity between Earth and the moon.(2 points)
pls help

Answers

It would make the planet's tilt harder to change, which would mean a more stable climate, which “just means maybe ice ages wouldn't happen as often,” he told me.

What is climate?

The average weather throughout a region's long term, usually 30 years, is called the climate. More precisely, it is the mean and variability of meteorological variables over a period of time that can range from a few months to many millions of years. Temperature, humidity, air pressure, wind speed, and precipitation are a few of the meteorological parameters that are frequently observed.

Climate, in a larger sense, refers to the interactions between the atmosphere, hydrosphere, cryosphere, lithosphere, and biosphere as well as their status as parts of the climate system. Latitude/longitude, topography, altitude, land use, and the presence of surrounding water bodies and their currents all have an impact on a place's climate.

To learn more about climate from the given link:

https://brainly.com/question/25707645

#SPJ4

When this event occurs and blankets animals with poisonous gasses it is called a ___________________ cloud.





Fill in the blank! :)

Answers

Answer:

pollution cloud. im not really sure but hope this helps

Explanation:

List the Basic Skill And Experiments​

Answers

Answer:

Observing. This is the most basic skill in science. ...

Communicating. It is important to be able to share our experiences. ...

Classifying. After making observations it is important to notice similarities, differences, and group objects according to a purpose. ...

Inferring. ...

Measuring. ...

Predicting.Explanation:

hope this he;lp

pick me a the brainliest

What are the developing reactions that allow the identification of Ni2+ and Cu²+?

Answers

Dimethylglyoxime is reacted with nickel ion solution. If it gives red precipitate then nickel ions are confirmed to be present.

Sodium hydroxide solution is been added to Copper Sulphate first in little and then in excess. A pale blue soluble precipitate is formed. This confirms presence of Cu²+.

CuSO4 + 2NaOH → Na2SO4 + Cu(OH)2

Fill in the blanks: Repeating an experiment several times and averaging the results helps to reduce ___ ___

Answers

Answer:

the amount of mistakes?

Explanation:

5.
The reaction 2AB 2A + B is first order with respect to AB.
The half-life of the reaction is 2 minutes.
0.100 mol of AB is dissolved in a solvent to form 100 cm of a reaction mixture.
What is the concentration of AB, in mol dm, after 6 minutes?
A. 0.0125
B. 0.0250
CU 0.125
D. 0.250
[1]
Your answer

Answers

The concentration of AB, in mol/dm³, after 6 minutes : 0.125

Further explanation

For first-order reaction :

[tex]\tt [A]=[A]oe^{-kt}\rightarrow t1/2=\dfrac{ln~2}{k}[/tex]

The half-life of the reaction is 2 minutes⇒t1/2=2 minutes

The concentration of AB, in mol dm, after 6 minutes ⇒ t=6 minutes

The rate constant (k) :

[tex]\tt k=\dfrac{ln~2}{t1/2}=\dfrac{0.693}{2}=0.3465[/tex]

The concentration after 6 minutes :

[tex]\tt [A]o=0.1~mol/100~cm^3=1~~mol/dm^3\\\\(A]=1\times e^{-0.3465\times 6}\\\\(A]=0.125[/tex]

hot dog hot dog hot diggity dog we got ears its time for cheers so long for now ah mickey mouse........ hot dog hot dog hot diggity dog

Answers

Answer:

b

Explanation:

Answer:

hot dog

Explanation:

The frequency of a radio wave was measured to be (3.1x10^8) Hz What is the energy of the radio wave in kilojoules (kJ)?
1 Hz = 1 s–1
h = 6.626 x 10-34 J.s
MAKE SURE YOU PAY ATTENTION TO THE UNIT OF ENERGY GIVEN

Answers

The frequency of a radio wave was measured to be ( 3.1 x [tex]10^8[/tex] ) Hz . The  energy of the radio wave in kilojoules ( kJ ) is  20.5   x [tex]10^{-29}[/tex] kJ .

The radio waves are the types of the electromagnetic radiation .

Calculation ,

given frequency of radio wave ( v ) = 3.1 x [tex]10^8[/tex]  Hz

plank's constant ( h ) = 6.626 x [tex]10^{-34}[/tex] J.s ( given )

Formula used : E = hv

where h = plank's constant

v = frequency of radio wave

Now putting the value of all in equation ( i ) we get ,

E =  6.626 x [tex]10^{-34}[/tex] × 3.1 x [tex]10^8[/tex]  

E = 20.5   x [tex]10^{-29}[/tex] kJ

to learn more about radio wave please click here ,

https://brainly.com/question/21995826

#SPJ1

How many atoms in Be element

Answers

Answer:

4

Explanation:

The Atomic number of beryllium is 4, which means that it has 4 protons.

anybody know this ?? If so help ASAP .

Answers

Answer:

Mechanical Energy

Explanation:

Definition: Mechanical Energy The mechanical energy is

the sum of the kinetic and potential energies.

Other Questions
If the amplitude of a simple harmonic oscillator is doubled, by what multiplicative factor does the angular frequency change? What are the life cycles of a butterfly will list you brainlest please hurry On June 1, the company collected $16,800 cash, which is for services to be performed over the next 12 months. For the following two separate cases, prepare the adjusting entry and determine the balance of Deferred Service Revenue at year-end. Case A: $16,800 was credited to Service Revenue during the year. Case B: $16,800 was credited to Deferred Service Revenue during the year. It due today answer this correctly and I mark you Brainliest look at the 2 picture it 5 question easy right, if you dont answer and put I dont know I will report you... If the area of the triangle with vertices (5,2),(x,4) and (0,3) is 25/2, find x? help me please! is compound interest I need help with this Which equation describes the line with a slope of 5 and a y-intercept of 4. Garvin Enterprises' bonds currently sell for $1,150. They have a 6-year maturity, an annual coupon of $85, and a par value of $1,000. What is their current yield? From 10 am to 4 pm the temperature changed -36 degrees. If the temperature changed equally for the last 6 hours, How much did it change each hour? 1. At STP, potassium is classified asA. a metallic solidB.a nonmetallic solidC.a metallic liquidD. metalloid solid Quadrilateral ABCD was dilated with the origin as the center of dilation to create quadrilateral EFGH on the graph below.Which rule best represents the dilation that was applied to quadrilateral ABCD to create quadrilateral EFGH? n the 1800s, middle-class women in America had few job opportunities. many job opportunities. many educational opportunities. few chances to stay at home. How did Monarchs gain more power?A.Natural ResourcesB.Raising taxesC.Waging WarD.Both B & CE.Both A and b .A gym charges an enrollment fee of $85 plus $25 per month, where xis the number of months and y is the total amount of money spent indollars. Which equation matches this situation Which percent represents the diagram?8.5%0.85%0.085%85% 4. To get to the sandwich shop, you left home and drove 6 miles south and then 10 miles west.If a bird flew from your house to the sandwich shop in a straight line, how far do you think thebird would fly? Use the simulation to check your reasoning.. What direction should it fly from your house to get to the shop?. Explain how you could use the simulation to answer these questions. Explain how you could use geometry equations to answer these questions. Zahid needs to ensure that the text flows around an image instead of the image being placed on a separate line as the text. Which tab on the Layout dialog box should Zahid use to perform this task? Position Text Wrapping Size He cant do this on the Layout dialog box. PLEASE ANSWER IMMEDIATELYSimplify the expression -416 - -613 Explain your solution using the additive inverse property.