calculate the mass of iron(iii) oxide fe2o3 that contains a billion ×1.00109 iron atoms. be sure your answer has a unit symbol if necessary, and round it to 3 significant digits.

Based on the Law of conservation of mass, the product form when baking soda decomposes is also 25 g.

NaHCO₃ => Na₂CO₃ + H₂O + CO₂

reactant mass = product mass  (law of conservation)

The law of conservation of mass or principle of mass conservation states that for any machine close to all transfers of rely and energy, the mass of the gadget has to remain consistent over the years because the gadget's mass cannot alternate, so the amount can neither be added nor be removed.

The law of conservation of mass states that during a chemical reaction mass is neither created nor destroyed. as example, the carbon atom in coal turns into carbon dioxide while it is burned. The carbon atom modifications from a strong shape to a gas however its mass does not trade.

Learn more about mass conservation here:-https://brainly.com/question/15289631

#SPJ1

Ionization energy tends to drop from the top to the bottom of a group as electrons move away from the nucleus.

All elements in the periodic table possess ionisation energy, also known as ionisation potential.

It is the energy needed to remove one electron from a neutral atom, which results in the formation of an ion.

learn more about Ionization energy here

https://brainly.com/question/1445179

#SPJ4

the question you are looking for is

Which best explains why ionization energy tends to decrease from the top to the bottom of a group?

A.The number of orbitals decreases.

B.The number of neutrons decreases.

C.Electrons get closer to the nucleus.

D.Electrons get farther from the nucleus.

Half-reaction for the cell's anode is given below:

Anode : [tex]\\Sn(s) \rightarrow Sn^{2+} (aq) +2e^{-}[/tex]

The anode is defined as the electrode at which electrons leave the cell and oxidation occurs, and the cathode as the electrode at which electrons enter the cell and reduction occurs. The anode is usually the positive side.

Learn more about anode here:

https://brainly.com/question/4052514

Your given question is quite incomplete here is complete question.

A voltaic cell is based on the reduction of _ Agt(aq) to Ag(s) and the oxidation of Sn(s) to Sn2+(aql) : Part 1  Include the phases of all species in the chemical equation: (aqh Anode: Sn(s) Sn?+ (aq)

#SPJ4

Elements from group 1 have the least chances to attract electrons due to their low electronegativity.

The atom's tendency to attract electrons in a molecule is known as electronegativity. The trend of electronegativity on the periodic table is as follows:

This means that the least electronegative element is from group 1 elements, specifically Cesium and Francium which have electronegativity of 0.79 and 0.70, respectively. In general, group 2 elements have higher electronegativity compared to group 1 elements. The three elements with the highest electronegativity are nitrogen, oxygen, and fluorine which have 3.04, 3.44, and 3.98, respectively.

To learn more regarding electronegativity, please refer to the link https://brainly.com/question/12676386.

#SPJ4

Answer:

independent variable is what you change in a science experiment, dependent variable is what's being measured in a science experiment. any characteristics, number, or quantity that can be measured or counted. A variable may also be called a data item.

A constant is a quantity that does not change. Although you can measure a constant, you either cannot alter it during an experiment or else you choose not to change it. Contrast this with an experimental variable, which is the part of an experiment that is affected by the experiment.

for materials and equipment, can be a ruler, and a data chart to put information, and a timer if needed,

you will record the amount of baking powder you have, and make observations of making sure you have the right amount of baking powder.

also make sure your experiment is safe.

I guess you can use a data chart to keep track of your information, and you can make a hypothesis, conlusion, BUT NO OPINION, make sure to know that before starting a experiment

The average atomic mass of strontium reported to two decimal places is 87.62 amu

To learn more about average atomic mass visit:

brainly.com/question/13753702

#SPJ9

Answer:

310 u

Explanation:

Hence, the formula unit mass for Ca 3 ( PO 4 ) 2 is 310 u .

An example of a chemical change is water undergoing electrolysis: liquid water becoming oxygen and hydrogen molecules.

In chemistry, changes are classified into two: physical and chemical.

A physical change occurs when a substance or object changes its appearance, phase, or is used in a mixture. More importantly, a physical change does not change the molecular structure of a substance. These three are examples of physical changes in water, wherein the changes are on their phases only:

water freezing: liquid water becoming solid water

water boiling: solid water becoming gaseous water

water evaporating: liquid water becoming gaseous water

On the other hand, a chemical change takes place when the original substance's of molecules are taken apart and put back together into new combinations that are different from the original combinations. An example of this is water undergoing electrolysis: liquid water becoming oxygen and hydrogen molecules, wherein a compound of water molecule is being break down into different molecules.

To learn more about chemical change: https://brainly.com/question/1222323

#SPJ4

The following elements are given in the table:

For the complete table, refer attachment.

Simple rules can be used to calculate the number of protons, neutrons, electrons, mass number and atomic number in an atom:

Read more about Structure of Atom:

https://brainly.com/question/14214017

#SPJ9

If the bears don't pack on enough pounds before they hibernate, they won't enough energy that will sustain them during the hibernation period.

Hibernation is a condition when an animal slows its heart rate to save energy and survive the winter without eating much.

Some animals just slow down and move less frequently during hibernation, but others go into a deep sleep and don't wake up till spring.

If the bears don't pack on enough pounds before they hibernate, they won't return to the mountains to den for the winter.

Packing on enough pounds will provide them with enough energy that will sustain them during the hibernation period.

Thus, If the bears don't pack on enough pounds before they hibernate, they won't enough energy that will sustain them during the hibernation period.

Learn more about hibernation here: https://brainly.com/question/1884191

#SPJ1

Answer:

variables because they can change or be changed

percentage error in the student’s experiment is 0.8%

To find percentage error we use the formula I E -T I / I T I X100

so by the given data experimental value is 99.2ºC and actual theoretical value is 100.0ºC by putting the values we get 0.8% error.

To determine how closely the measured number resembles the real value, the percentage error is calculated. It is a component of a thorough error analysis. In most domains, % error is always reported as a positive figure, although in some, either a positive or negative value is acceptable.

To learn more about percentage error:

https://brainly.com/question/4170313

#SPJ9

Answer: B

Explanation: :)

The heat change for vaporization of 6.00 kg of water at 100°C is 13490.584 kJ.

The heat or enthalpy for vaporization is the amount of heat energy which is required to bring change in the state of a substance, such as from a liquid into a vapor or gas. It is also known as enthalpy of vaporization. The unit of enthalpy for vaporization is given in joules (J) or calories (cal).

Given data :

mass of water = 6.00 kg

Hvap = 40.7 kJ/mol

To calculate the amount of heat -

we know,

the heat required for 1 mol of water to vaporize at 100°C is 40.7 kg

and

we know molar weight of water is  18.015 gram

So,

moles of 6.00 kg water is  = 2600  

                                               18.1015

mole of water = 331.464 mol

Hence,

Heat change for vaporization is = 331.464 × 40.7

                                                     = 13490.584 kJ

To learn more about vaporization,

brainly.com/question/28177805

#SPJ1

We could use a large size sieve to separate large stones from pear sized gravel. Option A

A sieve is a device that could be used for separation. When we are carrying out separation using a sieve, the separation is done according to the sizes of the materials. We know that the sieve allows a given size of the material to pass through while holding back the other sizes.

In this case, we can see a sieve that has been pictured in the question. The size of the sieve is what determines the kind of things that it could separate. As such, we could use a large size sieve to separate large stones from pear sized gravel. Option A

Learn more about sieve:https://brainly.com/question/13663054

#SPJ1

Carlos likes to bowl. He timed how long it took his ball to travel the length of the bowling alley's 18-meter lane. The ball will travel 12 m far after it had travelled for 2 s.

Length can be defined as a term used for identifying the size of an object and distance travelled by the object from one point to another point.

The S.I. unit of length is meter.

It can also be defined as the amount of time that something can last.

Thus, Carlos likes to bowl. He timed how long it took for his ball to travel the length of an 18-m lane in the bowling alley. The ball will travel 12 m far after it had travelled for 2 s.

To learn more about  length, refer to the link below:

https://brainly.com/question/8552546

#SPJ1

Your question is incomplete but most probably your full question was

Carlos likes to bowl. He timed how long it took for his ball to travel the length of a an 18-m lane in the bowling alley. He plotted the final distance and time on a line graph. Carlos drew a line from this point to the origin of the graph.

How far down the lane was the ball after it had traveled for 2 s?

6 m

9 m

12 m

18 m

Answer:

Explanation:

Scientists use the periodic table to quickly refer to information about an element, like atomic mass and chemical symbol. The periodic table's arrangement also allows scientists to discern trends in element properties, including electronegativity, ionization energy, and atomic radius.

Answer:

Scientists use the periodic table to quickly refer to information about an element, like atomic mass and chemical symbol. The periodic table's arrangement also allows scientists to discern trends in element properties, including electronegativity, ionization energy, and atomic radius.

Explanation:

The ground state electron configuration of the element is; 1s2 2s2 2p6 3s2.

The mass spectrum shows the identity of an element. We can use it to identify the number of isotopes in the elements as well as the abundance of each of the isotopes.

Now, the element that is here has three isotopes, the element is magnesium. We can obtain the relative atomic mass as the sum of the products of the mass of each isotope and its relative abundance. The ground state electron configuration of the element is; 1s2 2s2 2p6 3s2.

Learn more about isotopes:https://brainly.com/question/12955625

#SPJ1

Taking into account the rule of three, you eat 480 kcal.

The rule of three is a way of solving problems of proportionality between three known values and an unknown value, establishing a relationship of proportionality between all of them.

That is, what is intended with it is to find the fourth term of a proportion knowing the other three.  

If the relationship between the magnitudes is direct, the direct rule of three must be applied as follow, being a, b and c known data and x the variable to be calculated:

a ⇒ b

c ⇒ x

So: x= (c×b)÷ a

To know the mass of eaten gummy bears, the following rule of three applies: if 1 gummy bear weighs 3 g, 40 gummy bears weigh how much mass?

1 gummy bear ⇒ 3 g

40 gummy bears ⇒ x

So: x= (40 gummy bears× 3 g)÷ 1 gummy bear

Solving:

x= 120 g

If gummy bears are 100% carbohydrates and carbohydrates are 4 kcal/g, the following rule of three applies: If 1 g has 4 kcal, 120 g has how many kcal?

1 g ⇒ 4 kcal

120 g⇒ x

So: x= (120 g× 4 kcal)÷ 1 g

Solving:

x= 480 kcal

In summary, you eat 480 kcal.

Learn more with this example:

brainly.com/question/12482948

#SPJ1

The saline solution has a density of 1.045 g/mL.

Pure water has a density of 1.000 g/mL.

The saline solution has larger mass, but the volumes are equal.

d = 1.000 g/ml ×25.6g / 24.5g

d = 1.045 g/mL.

The saline solution has a density of 1.045 g/mL.

Because it is a nontoxic, isotonic solution that does not impair healing, normal sterile saline is recognised as the most suitable and preferred cleansing solution.

learn more about saline solution here

https://brainly.com/question/4934751

#SPJ4

Using an empirical approach when attempting to answer mean your answer should be based on data that is backed by experiments and evidence.

It is an experiment-based approach based on real-world data and results. The empirical approach-based answer should not be made up of theories and concepts. Your calculations and results should be based on experiences in the real world. Empirical research can be Quantitative research (information based on numerical data) or Qualitative (non-numerical).

On the other hand, non-empirical or theoretical answers are based on theories and concepts that have not been experimented as of now.

If you need to learn more about  empirical approach, click here

https://brainly.com/question/15880833?referrer=searchResults

#SPJ4

The article aims to highlight the most recent improvements in the PCET procedures for electrocatalysis at clearly characterized electrode–electrolyte interfaces.

Aim : Here, we focus on the most recent developments in the PCET methods for electrocatalysis at clearly defined electrode–electrolyte interfaces.

Method: Since the groundbreaking and ongoing studies made by Frumkin and his colleagues initiated in the 1930s, non-covalent interaction, which is controlled by the cation/anion features, is known to play a crucial role in the interfacial water and adsorbate environments correlated to electrode–electrolyte catalytic properties.

The microscopic perspective of this interaction is still a significant scientific mystery, nevertheless. Recent research based on the well-defined surface and solid-liquid interfacial structure of single-crystal model electrodes revealed novel characteristics of the cation effect.

Practical usage: Designing high-performance electrode and electrolyte materials requires an understanding of the roles played by the electrical double layer (EDL) structure in proton-coupled electron transfer (PCET) electrode processes.

Learn more about  electrode–electrolyte here:

https://brainly.com/question/10427575

#SPJ4

Answer:

3HCl + Cr (HCO3)3 --> CrCl3 + 3CO2 + 3H2O

Answer: An atom

Hope this helps!

Answer:

Cm2 Is not a unit of volume.

Explanation:

Hope this helps!

Please mark as brainliest if correct!

The large piece of jewelry  that has a mass of 132.6 g and when is submerged in a graduated cylinder that initially contains 48.6 ml water and the volume increases to 61.2 ml once the piece of jewelry is submerged, has a density of: 10.523 g/ml

To solve this problem the formulas and the procedures that we have to use  are:

Where:

Information about the problem:

Applying the volume formula we get:

v = v(f)-v(i)

v = 61.2 ml - 48.6 ml

v = 12.6 ml

Applying the density  formula we get:

d = m/v

d = 132.6 g/12.6 ml

d = 10.523 g/ml

It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.

Learn more about density in: brainly.com/question/1354972

#SPJ4

The histone octamer has a total charge of +146 at pH 7 if histidine residues are assumed to be uncharged.

There are 9 negatively charged (Asp + Glu) and 26 positively charged (Arg + Lys) residues in total on histone H2B.

The net charge on H2A is 26 - 9 = +17.

There are 10 negatively charged (Asp + Glu) and 28 positively charged (Arg + Lys) residues in total on histone H2B.

The net charge on H2B is 28 - 10 = +18.

There are 11 negatively charged (Asp + Glu) and 31 positively charged (Arg + Lys) residues in total on histone H3.

The net charge on H3 is 31 - 11 = +20.

There are 7 negatively charged (Asp + Glu) and 25 positively charged (Arg + Lys) residues in total on histone H4.

The net charge on H4 is 25 - 7 = +18.

2 x (17 + 18 + 20 + 18) = +146 is the total charge of the histone octamer.

Learn more about charge on Histones here:

https://brainly.com/question/9081174

#SPJ4