Circle the correct word(s) in brackets to complete each sentence.
i) Hooke's Law works for ( springs only / all materials / some materials ).
ii) Hooke's Law only applies ( up to / over ) a certain force.
iii) The force at which Hooke's Law stops working for springs is
( higher / lower ) than
for most other materials?

Answers

Answer 1

Answer:

i) Hooke's Law works for some materials

ii) Hooke's Law only applies up to a certain force

iii) The force at which Hooke's Law stops working for springs is lower than for most materials

Explanation:

Hooke's Law of elasticity states that the deformation of an elastic material is proportional to the applied for small deformations

The law is applicable to elastic materials whose values of deformation or extension as well as the applied load or stress are expressible by a single real number

Hooke's Law is applicable when the force and the extension of the elastic material are proportional, at larger force, the elastic material is observed to expand more than as expected based on Hooke's Law

The nature of springs is such that its elastic limit is reached by a much lower force than for most materials. Therefore, Hooke's law stops working for springs at a lower force than for most materials.


Related Questions

A paratrooper jumping from the plane lands safely ,why?​

Answers

A paratrooper opens parachute immediately after jumping to increase the air resistance and land safely on the ground. as the speed of the paratrooper increases, the air resistance also increases

A constant force of 4.5N acts on a 7.2 kg object for 10 s what is the change in the object velocity

Answers

Answer:

The change in the object's velocity is 6.25 m/s

Explanation:

Force

According to the second Newton's law, the net force exerted by an external agent on an object of mass m is:

F = ma      [1]

Where a is the acceleration of the object.

On the other hand, the equations of the Kinematics describe the motion of the object by the equation:

[tex]v_f=v_o+at\qquad\qquad[2][/tex]

Where:

vf is the final speed

vo is the initial speed

a is the acceleration

t is the time

It's given a constant force of F=4.5 N acts on an object of mass m=7.2 kg. The object has an acceleration we can calculate solving [1] for a:

[tex]a=\frac{F}{m}[/tex]

[tex]a=\frac{4.5}{7.2}=0.625[/tex]

[tex]a=0.625\ m/s^2[/tex]

It's required con compute the change of velocity (or its magnitude, the speed). From [2]:

[tex]v_f-v_o=at[/tex]

The expression at the left side is the change of speed Δv:

[tex]\Delta v=at[/tex]

Knowing the time is t=10 s:

[tex]\Delta v=0.625*10[/tex]

[tex]\Delta v=6.25\ m/s[/tex]

The change in the object's velocity is 6.25 m/s

How high will the ball go? I would really appreciate a step by step answer!

Answers

Answer:

y = 3.26 [m]

Explanation:

In order to solve this problem, we must use the following equation of kinematics.

[tex]v_{f}^{2}= v_{o}^{2}-2*g*y[/tex]

where:

Vf = final velocity = 0

Vo = initial velocity = 8 [m/s]

g = gravity acceleration = 9.81 [m/s²]

y = elevation [m]

Note: The negative sign in the equation above represents that the movement is againts the direction of the gravity acceleration.

Now replacing:

[tex]0=8^{2} -2*9.81*y\\19.62*y=64\\y=3.26 [m][/tex]

An incandescent bulb is supplied with
100 J of energy every second and
transfers 5 J of energy by light
Calculate the efficiency of the bulb.

I need some help can you explain this to me please and thank you

Answers

Answer:

Efficiency = 5%

Explanation:

Given that,

Supplies energy to the bulb = 100 J

Transferred energy by the bulb = 5 J

We need to find the efficiency of the bulb. It can be given by "

[tex]\eta=\dfrac{\text{useful energy out}}{\text{useful energy in}}\times 100\\\\=\dfrac{5}{100}\times 100\\\\=5\%[/tex]

So, the efficiency of the bulb is 5%.

Does static electricity attract dead skin cells

Answers

Answer:

no i dont think so

Explanation:

Twins Jody and Taylor are rearranging the furniture in their bedroom and want to move a dresser across the room. The dresser has a sliding force of 90N. Jody can push with a force of 55N and Taylor can push with a force of 38N. What is the Net Force? Can the twins move the dresser across the room? Explain why in complete sentences and show all math work to support your answer.

Plz help this is due in 5 days ;-;

Answers

Answer:

yes, They will be able to move the dresser.

Explanation:

sliding force 90N

55N + 38N = 93N

therefore, yes the twins can move the dresser

In what direction do the velocity vectors point in circular motion?

Answers

The velocity vector is always perpendicular to the radius. By radius, I mean the inward centripetal force that pulls the object to continue on its curved path. Without this inward force, the object would continue on a straight path tangential to the curve it was previously on.

A student wants to use all of the appliances at the same time so plugs them in to a multiway socket.
The socket has a maximum safe current of 30A and the mains electricity is 230V.
a. Is it safe to use all five appliances at once?
Explain your answer showing your use of the equation

Answers

Answer:

The answer would be no

Explanation:

because the voltages are so high, we can assume that 5 appliances divided up between the voltages would not be safe to use together and would ultimately cause the circuits to overload

the distance between pole and position of image can denoted by___
a)u. b)v. c)R. d)C​

Answers

Answer:

b) v

Explanation:

the distance between pole and position of image can denoted by v

1. Two vectors have magnitudes 6 & 8 units, respectively. Find the maximum &
minimum resultant vectors.
nitsdoftboltant fuo vectors acting in the same direction is 20​

Answers

Answer:

The maximum magnitude of their resultant is 14 units, and the minimum is 2 units

Explanation:

Resultant Vectors

When two or more vectors are added or subtracted, the resultant vector can be found by considering their magnitudes and directions.

Two vectors applied to the same point can produce a result that can vary from being completely collaborative or completely opposite.

If two vectors act in a collaborative form, their magnitudes are added and the result has the maximum possible magnitude. If they act in opposite directions, the result has the minimum possible magnitude.

Thus, being 6 and 8 units the magnitudes of the vectors, the maximum magnitude of their resultant is 14 units, and the minimum is 2 units.

the height has a distance of 2.5 seconds to hit the ground what is gravity?

Answers

Answer:

11 times

Explanatiom:

756 fourty

For this graph to the right, what is the
velocity of the object? Show your work.

Answers

I dont see a mark where it is, if there was a line it would be marking the constant speed of it. There is just time(s) which probably stands for speed, and position(m) which probably stands for miles. There is a measurement of 50, down to 10. Please give me more explanation to this question and I may be able to help!

You are driving at 30.0 m/s on a freeway curve of radius 25.0 m. What is the magnitude of your acceleration?

Answers

Answer:

36.0 m/s^2

Explanation:

The magnitude of your acceleration is equal to 36.0 [tex]m/s^2[/tex].

Given the following data:

Radius, r = 25.0 meters. Speed, V = 30.0 m/s.

To calculate the magnitude of your acceleration:

Mathematically, the centripetal acceleration of an object is given by this formula:

[tex]A_c = \frac{V^2}{r}[/tex]

Where:

[tex]A_c[/tex] is the centripetal acceleration.r is the radius of the circular track.V is the velocity of an object.

Substituting the given parameters into the formula, we have;

[tex]A_c = \frac{30.0^2}{25.0}\\\\A_c = \frac{900}{25.0}[/tex]

Centripetal acceleration = 36.0 [tex]m/s^2[/tex]

Read more on centripetal acceleration here: https://brainly.com/question/2788500

_____ is the sum of all potential and kinetic energy.

Group of answer choices

Law of Conservation of Energy

Gravitational Potential Energy

Stored energy

Mechanical Energy

Answers

Answer:

mechanical energyis the sum of all potential and kinetic energy.hope it helps!

force of 4 Newtons in 20 power output? 40 Nm/sec 2 Nm 2 Nm/sec 1​

Answers

Answer:

P = 0.2 W

Explanation:

Given that,

Force, F = 4 N

Displacement, d = 1 m (say)

Time, t = 20 s

We need to find the power output. Power is the rate of doing work. So,

P = W/t

[tex]P=\dfrac{Fd}{t}\\\\P=\dfrac{4\times 1}{20}\\\\P=0.2\ W[/tex]

So, the required power is 0.2 W.

Calculate Density:
Volume=43cm3, Mass=45g

Answers

Answer:

P= 1.04651 g/cm3

Explanation:

Zach drives his car around a circular section of a road having a radius of 50 meters at a constant speed of 20 m/s. What is the centripetal acceleration of Zach's car?

Answers

Answer:

Centripetal acceleration = 8m/s²

Explanation:

Given the following data;

Radius, r = 50m

Velocity, v = 20m/s

To find centripetal acceleration;

Centripetal acceleration = v²/r

Centripetal acceleration = 20²/50

Centripetal acceleration = 400/50

Centripetal acceleration = 8m/s²

Therefore, the centripetal acceleration of Zach's car is 8 meters per seconds square.


After a rocket falling through the air explodes, the net momentum of its
fragments...
A. increase
B. Decrease
C. stays the same
D. Is zero

Answers

it increase it momentum

When the velocity of an object is quadrupled , by what factor is its kinetic energy changed ?

Answers

Answer:

I believe it is 16

Explanation:

Answer:so add the momentum twice and then the kinetic energy becomes four times

Explanation:This includes to me not the factor but by what factor it’s kenetic energy changes Momentum becomes twice and kinetic energy becomes four times its original value

2. What is the smallest particle into which an
element can be divided?
O proton
particle
O atom
O nucleus

Answers

Explanation:

atommmmmmmmmmmmmmmmmmmmm

Atom hope this helps!

The density of solid copper is 8960 kg/m3.
The density of molten copper is 7900 kg/m3.
Explain this difference in density by referring to the particle model and the arrangement of
atoms in the two states. (2)

Answers

Explanation:

The density of a solid copper is 8960kg/m^3 while the density of a molten copper is 7900kg/m^3 this is due to the difference in the state of matter, the solid copper is in solid state while the molten copper is in form of a liquid. In the solid copper atoms are tightly pack while they atom are not tightly packed.

PLEASEEEE HELP MEEEEE!!!! WILL GIVE BRAINLIST!
Which point is located at (4, –2)?

On a coordinate plane, point A is 2 units to the left and 4 units up. Point B is 4 units to the right and 2 units down. Point C is 4 units to the left and 2 units up. Point D is 2 units to the right and 4 units down.
A
B
C
D

Answers

Answer:

It is B

Explanation:

Answer:

the other guy is right im answering so you can give him brainliest have a nice day :)

Explanation:

What does the universe contain?

A. Only stars and planets

B. Everything

Answers

Answer:

B

In my opinion. :)

Explanation:

Which of the following is a force?

Momentum

Friction

Acceleration

Velocity

Answers

Answer:

friction

Explanation:

have you not heard frictional force?

have you ever heard momentum force or acceleration force

hope this helps. if not. please report it and let someone else try it

an object is moving along a straight road at the speed of 6 km per hour

a,how future away is the object every one hour​

Answers

Answer:

6km

Explanation:

Drag the tiles to the correct boxes to complete the pairs. Not all tiles will be used. Match the reactants with the products.

Answers

This is an incomplete question, the complete question is given below.

Drag the tiles to the correct boxes to complete the pairs. Not all tiles will be used.  Match the reactants with the products.

copper sulfate + oxygen

copper oxide

zinc sulfate + copper

aluminum chloride + copper

copper + water

copper sulfate + zinc  →

aluminum + copper chloride  →

copper oxide + hydrogen  →

copper + oxygen  →

Answer :

Copper sulfate + Zinc → Zinc sulfate + copper

Aluminium + Copper chloride → Aluminium chloride + copper

Copper oxide + Hydrogen → Copper + Water

Copper + Oxygen → Copper oxide

Explanation :

As we know that chemical reaction is a reaction in which two or more than two substances or reactants are reacted to give two or more than two different products.

According to the question:

Copper sulfate + Zinc → Zinc sulfate + copper

This reaction is a single replacement reaction in which zinc is more reactive than copper and zinc displaces copper from its salt to give products.

Aluminium + Copper chloride → Aluminium chloride + Copper

This reaction is a single replacement reaction in which aluminium is a more reactive element than copper and aluminium displaces copper from its salt to give products.

Copper oxide + Hydrogen → Copper + water

This reaction is a single replacement reaction in which hydrogen displaces less reactive metals from their oxide to form water and the metal.

Copper + Oxygen → Copper oxide

This reaction is a synthesis reaction in which two different atoms or molecules combine to form single compound.

Answer:

Copper sulfate + Zinc → Zinc sulfate + copper

Aluminium + Copper chloride → Aluminium chloride + copper

Copper oxide + Hydrogen → Copper + Water

Copper + Oxygen → Copper oxide

Explanation:

guy above me

The intensity of a sound is another way to say the _________ of a sound.
frequency
amplitude
wavelength
loudness

Answers

Answer:

Frequency and tfcvvbyfgffhhi

Answer:

I think frequency

Explanation:

What two things determine whether a molecule is polar?
Check all that apply.
A. If there is an anion and a cation
B. If the molecule is easily ionized
C. If the bonds are polar
D. The molecular shape

Answers

Answer:

c

Explanation:

Answer:C&D

Explanation:

I just did it

How are electromagnetic waves different from sound or water waves?

Answers

Explanation:

Electromagnetic waves are different from sound or water waves in such a way that water and sound waves are called mechanical waves that requires a material medium for their propagation.

Electromagnetic waves do no require a material medium for propagation.

Electromagnetic waves are carried or transported by radiation and this can be passed through vacuums and different other materials. But mechanical waves such as water and sound waves requires a material medium for their propagation. They cannot pass through a vacuum.

mechanical waves apply________to push molecules in their path?
(fill in the blank)

Answers

Answer:

what is the force of gravitational attraction between an object with a mass of 100 kg and another object that has a mass of 300 kg are at a distance of 2m apart

Other Questions
what happened in spains golden age ? PLEASE HELP out of 50 flags, 35 are triangular and of the remaining 15 some are rectangular and some are pentagonal. Satish chooses one flag randomly from all 50. Estimate the highest probability is that he picks which flag can someone help meee please OMG PLEASE HURRRRYYYYYYYYY Simplify:3x + xdoes anyone know the answer? V = BH - 5 How do I solve for b in this equation What was life like in Ancient Egypt? The ________ were at the bottom of the Sumerian social hierarchy.a.priestsb.merchantsc.slavesd.farmers 2z 7 need this done now What is a product of knowledge and intelligence that allows us to judge right from wrong? A ConscienceB EmotionC WisdomD Integrity What does the graph show the rate of temperature change over time? 22. (MC)SHARKS' TEETH Langston CarterThe day we found the sharks' teeth was foggy and cool. Moisture hung in the air so thick you could almost see it sparkling in the dim sunlight. There were days, early in the summer like this one, where it seemed there was more water in the air than in the bay. We had beached the boat and stepped out on the recently cleared spit of land. The ground had a light dusting of white sand over an under layer of dried black mud. It looked like a recently frosted chocolate cake, though the frosting was spread a bit thin for my taste. The ground was solid, but we knew from experience that it was full of fiddler crab holes, and would be underwater at the first super-high tide. Mysteriously, to us anyway, someone wanted to build a house there.We often came to these spots to look for artifacts. Our beach, our summer home, had been a fishing camp for as long as anyone living could remember. The oldest stories told of travelers coming down to the edge of the sea, lining up to fill their wagon beds with salted fish to take back home. Old decaying cabins still lined the beach. Rotting nets, hung out to dry in the last century, decorated their weathered walls. Their broken faces spun stories in our minds. The fishermen who, tanned and wrinkled from sun and salt, hauled their nets full of splashing mullet in to cheers from the waiting crowds. The bounty of the sea lightened everyone's hearts, and the smell of roasting fish filled the damp air. Women fanned themselves from wagon seats. Children splashed in the shallow edges of the bay. It was a scene we had acted out as youngsters, building an imaginary bridge to a life we would never fully know.What line from the text introduces an element of the plot? (5 points)Moisture hung in the air so thick you could almost see it sparkling in the dim sunlightWe often came to these spots to look for artifacts.Our beach, our summer home, had been a fishing camp for as long as anyone living could rememberThe bounty of the sea lightened everyone's hearts which pair of of expressions are equivalent? A. 10(x+4) and 10x+14 B. 3(x+5) and 3x + 5 C. x+x+x+1+1+1 and 3(x+1) D. x+x+x+x+1+1+1+1 and 8x Which of the following represents a function? OA X -5-1 9 8 -1 y 1 7 23 17 1 B. y NS x -4 NO 4 C. {(0,1),(3,2), (-8,3), (-7,2), (3,4)} D. -4 5 9 3 13 If you have a spectrum modem can you connect it to a VPN without a Router. Is it possible to do? What is 7.44444444444 in fraction form The variable s varies directly as the square of t. When s = 4, t = 12. Nicks work finding the value of t when s = 48 is shown:What is the first error, if any, in Nicks work?See in pic: A bicycle pump contains 20 cm3 of air at a pressure of 100 kPa. The air is then pumped in a tyre of volume 100 cm3. Calculate the pressure of the air in the tyre. Assume that the temperature is fixed. 1) ________ is a common technique to help integrate a quotation into an originally written sentence. only find the vertex and axis of symmetry