2. The boiling point of a solution containing 6.4 g of the hormone adrenaline in 360 g of
CCl4 is 0.49 K higher than the boiling point of pure CC14. Calculate the molar mass of
adrenaline. (K = 5.02 kg K/mol).
Answer:
MM = 182.13g/mol
Explanation:
Hello!
In this case, since the boiling point elevation is computed via:
[tex]\Delta Tb=i*m*K[/tex]
Thus, since adrenaline is nonionizing, we can compute the molality at first instance:
[tex]m=\frac{\Delta Tb}{i*K}=\frac{0.49K}{1*5.02kg\frac{K}{mol} } \\\\m=0.0976mol/kg[/tex]
Now, we compute the the moles of adrenaline in 360 g (0.360 kg) of CCl4:
[tex]n=0.0976mol/kg*0.360kg\\\\n=0.0351mol[/tex]
Finally, the molar mass:
[tex]MM=\frac{6.4g}{0.0351mol}\\\\MM=182.13g/mol[/tex]
Best regards!
Determine whether the given name for each ionic compound is correct or not. C o I 2 CoIX2: cobalt(II) iodide Correct name B a C l 2 BaClX2: barium dichloride Correct name C s 2 O CsX2O: cesium oxide Choose... R b 2 S RbX2S: rubidium sulfite Correct name S r B r 2 SrBrX2: strontium(II) bromide Incorrect name
Answer: [tex]CoI_2[/tex] : cobalt (II) iodide : correct
[tex]BaCl_2[/tex] : barium di chloride : incorrect
[tex]Cs_2O[/tex] : cesium oxide: correct
[tex]Rb_2S[/tex] : rubidium sulphite : incorrect
[tex]SrBr_2[/tex] : strontium (II) bromide : correct
Explanation:
The nomenclature of ionic compounds is given by:
1. Positive is written first followed by the oxidation state of metal in roman numerals in parenthesis.
2. The negative ion is written next and a suffix is added at the end of the negative ion. The suffix written is '-ide'.
Hence, the name of [tex]CoI_2[/tex] is cobalt (II) iodide, [tex]BaCl_2[/tex] is barium (II) chloride, [tex]Cs_2O[/tex] is cesium oxide, [tex]Rb_2S[/tex] is rubidium sulphide and [tex]SrBr_2[/tex] is strontium (II) bromide.
The process of the body changes that cause a child's body to become capable of reproduction
Answer:
The process is called Puberty.
A solution is prepared by dissolving 25.0 mL ethanol, CH3CH2OH (d=0.789 g/mL), in enough water to produce 250.0 mL solution. What is the molarity of ethanol in the solution?
The molarity = 1.716 M
Further explanationGiven
25 ml ethanol
d = 0.789 g/ml
250 ml solution
Required
The molarity
Solution
Molarity shows the number of moles of solute in every 1 liter of solute or mmol in each ml of solution
[tex]\large{\boxed {\bold {M ~ = ~ \frac {n} {V}}}[/tex]
mass of ethanol :
= 25 ml x 0.789 g/ml
= 19.725 g
mol ethanol :
= 19.725 g : 46 g/mol
= 0.429
The molarity :
= 0.429 : 0.25 L
= 1.716 M
The molarity of ethanol in the solution is 1.716M
What is the molarity of a solution?Molarity shows the number of moles of solute in every 1 liter of solute or mmol in each ml of solution
Determine the mass of ethanol :
Mass of ethanol = 25 ml x 0.789 g/ml
Mass of ethanol = 19.725 g
Determine the moles of ethanol
Moles = Mass/Molar mass
Moles = 19.725 g/46 g/mol
Moles of ethanol = 0.429moles
Calculate the molarity using the formula below;
Molarity = Moles/Volume
Molarity = 0.429/0.25 L
Molarity = 1.716 M
Hence the molarity of ethanol in the solution is 1.716M
Learn more on molarity here: https://brainly.com/question/17138838
Looking at the following equation, which is the correct order of coefficients?
NH3 + O2 --> NO + H2O
Answer: The correct order of coefficients is 4, 5, 4 and 6.
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side.
The balanced chemical equation is:
[tex]4NH_3+5O_2\rightarrow 4NO+6H_2O[/tex]
The correct order of coefficients is 4, 5, 4 and 6.
Describe the motion of a person NOT wearing a seat belt if the car stops suddenly
A the person and car will stop together
B the person will stop faster than the car because they are lighter
C the car will stop and the person will keep moving forward
D the car will stop and the person will speed up
Answer:
c the car will stop and the person will keep moving forward
Explanation:
Because since the person has no force apllied they will keep moving until force is apllied.
8. Neil pogo sticks from his locker to his science class. He travels 8 m east then 8 m west
back to his locker. What distance did he cover? What was his displacement?
Answer:
12
Explanation:
The distance that Neil Pogo travels is 16 meters. While the displacement is Zero (0).
What is Displacement?Displacement may be defined as the distance traveled by an object from the initial point to the final point. It is a vector quantity and has a direction and magnitude. In a more simple sense, it is known to be the alteration of the position of the object.
According to the question,
The total distance covered by Neil Pogo = 8 m east then 8 m west = 16 meters.
But according to the definition of displacement, his total displacement was zero. This is because the distance between his initial point and the final point is zero.
He returned back to the same place indicating his zero displacements.
Therefore, the distance that Neil Pogo travels is 16 meters. While the displacement is Zero (0).
To learn more about Displacement, refer to the link:
https://brainly.com/question/14422259
#SPJ2
Determine the density (in g/mL) of a substance with a mass of 105 g and a volume of 17.6 mL.
Answer:
Density, d = 5.96 g/mL
Explanation:
Given that,
Mass, m = 105 g
Volume, V = 17.6 mL
We need to find the density of the substance. So,
[tex]d=\dfrac{m}{V}\\\\d=\dfrac{105\ g}{17.6\ mL}\\\\d=5.96\ g/mL[/tex]
So, the density of the substance is 5.96 g/mL.
How many grams of H2O are needed to produce 150 g of Mg(OH)2? (Molar mass: H2O = 18.02 g/mol; Mg(OH)2 = 58.33 g/mol )
Answer:
92.6
Explanation:
6 mol x 18.02 g of H2o --> 3 mol x 58.33 g Mg(OH)2
108.12 g of h2o --> 174.99 of Mg(OH)2
g of H2O is 150 g of Mg(OH)2
150g x 108.12g / 174.99 =
92.67
compute the mass-specific enthalpy change associated with Nz that is undergoing a change in state from 400 k to 800 k
Answer:
The correct answer is "430 kJ/kg". A further explanation is given below.
Explanation:
The given values are:
T₁ = 400 k
T₂ = 800 k
The average temperature will be:
= [tex]\frac{T_1+T_2}{2}[/tex]
= [tex]\frac{400+800}{2}[/tex]
= [tex]600 \ k[/tex]
From table,
At 600 k the [tex]C p[/tex] will be = 1.075
Now,
⇒ The specific enthalpy = [tex]Cp(T_2-T_1)[/tex]
⇒ [tex]\Delta h=1.075 (800-700)[/tex]
⇒ [tex]=430 \ kJ/kg[/tex]
What is the volume, in liters, of a 0.2 M solution containing 8.5 grams of AgNO3?
Answer:
The volume of a 0.2 M solution containing 8.5 grams of AgNO₃ is 0.25 L
Explanation:
Molarity (M) is a common way of expressing the concentration of solutions. It is defined as the number of moles of solute per volume of solution. The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution.
[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
Being the molar mass of AgNO3 169.87 g / mol, then you can apply the following rule of three: if 169.87 grams are present in 1 mole of the compound, 8.5 grams will be present in how many moles?
[tex]amount of moles=\frac{8.5 grams*1 mole}{169.87 grams}[/tex]
amount of moles= 0.05
So, being the molarity equal to 0.2 M, replacing in the definition of molarity:
[tex]0.2 M=\frac{0.05 moles}{volume}[/tex]
and solving you get:
[tex]volume=\frac{0.05 moles}{0.2 M}[/tex]
volume=0.25 L
The volume of a 0.2 M solution containing 8.5 grams of AgNO₃ is 0.25 L
How is the effect of concentration changes on the reaction rate seen in the
rate law?
A. The effect of concentration changes on the rate constant affects
the reaction rate.
O B. A change in concentration of a reactant would change the
exponent of that reactant.
O C. The rate law does not show how concentration changes would
affect the reaction rate.
D. The exponents determine how much concentration changes affect
the reaction rate.
Answer: D. The exponents determine how much concentration changes affect the reaction rate.
Explanation: This is correct. The exponents in the rate law do determine how much the concentration changes impact the reaction rate.
Option A i.e. The effect of concentration changes on the rate constant affects the reaction rate.
what is rate constant?
The proportionality constant, which explains the link between the molar concentration of the reactants and the pace of a chemical reaction, is known as the rate constant. The rate constant, also known as the reaction rate constant or reaction rate coefficient, is indicated by the letter k. Because reactant concentrations decrease as reactants are transformed to products, reaction speeds typically decrease over time. When reactant concentrations are raised, reaction rates generally increase. The temperature has an impact. The following are two methods for calculating rate constant:
Using the Arrhenius formula.The order of the reaction and the molar concentrations of the reactants are used.To know more about rate constant here
https://brainly.com/question/20305871
#SPJ2
Each of the following organs had a role in excretion, EXCEPT for the _____?
A. Lungs
B. Kidneys
C. Heart
D. Skin
Each of the following organs had a role in excretion, except for the Heart. Therefore, the correct option is option C.
What is excretion?Excretion seems to be the process throughout which an organism eliminates metabolic waste. In vertebrates, this is largely done by that of the skin, kidneys, especially lungs. When a substance is secreted, this could perform certain roles once it leaves the cell. Excretion is required by all forms of life.
Animals, for example, use the urethra, a member of the excretory, to evacuate urine. In unicellular organisms, waste products are ejected quickly via the cell surface. During biological functions, such as cellular respiration, a variety of chemical changes occur in the body. Each of the following organs had a role in excretion, except for the Heart.
Therefore, the correct option is option C.
To know more about excretion, here:
https://brainly.com/question/9382811
#SPJ6
Help pls!!!!!!!!!!!!!!!!!!!
Answer:
water
Explanation:
water is made up of both hydrogen and oxygen (h2o)
PLEASE HELPPP!!! Calculate the mass (in grams) of lithium hydroxide that would be needed to produce 8.03 mol of
lithium sulfate in the reaction below.
2 LIOH + H2S04 -> Li2SO4 + 2 H20
Answer:
385g LiOH
Explanation:
Assuming the equation is balanced...
(8.03 mol Li2SO4) x (2 LiOH/ 1 Li2SO4)
= 16.1 mol LiOH ;
16.1 mol LiOH x (24g LiOH/ 1 mole LiOH) = 385g LiOH
The number of moles of LiOH needed to produce 8.03 moles is 16.06 moles. One mole of LiOH weighs, 23 g/mol. Hence, 16.06 moles weighs, 369.3 g.
What is lithium sulphate ?Lithium sulphate is an ionic compound formed by the donation of electron from the lithium metal to the sulphate group. It is formed by the reaction of lithium hydroxide with sulphuric acid.
As per the given balanced chemical equation of the reaction, the 2 moles of lithium hydroxide LiOH gives one mole of lithium sulphate. Then, number of moles of LiOH needed to give 8.03 mol of the product is:
2 × 8.03 = 16.06 mol.
Molar mass of LiOH = 23 g/mol.
mass of 16.06 moles of LiOH = 23 ×16.06 = 369.3 g.
Therefore, the required mass LiOH is 369.3 g.
Find more on LiOH:
https://brainly.com/question/16251002
#SPJ6
Question 1 (1 point)
Stars come in different
a:colors
b:sizes
c:temperatures
d:all of the above
PLESE HELP ANYONE HURRY!
Answer:
All of above.
Explanation:
Stars. They come in different sizes, temperatures, and colors. Not all are yellow, and not all are small or big. Some can be hot, and others can be cold. Stars can exist for a while, years on end. It just varies on how long it's been there.
I hope this helps you!
What is the result of 2.58×0.12, including correct significant figures? Select the correct answer below: 0.3096 0.31 0.310 0.3
Answer:
The answer would depend on the required significant number.
Explanation:
0.3096 is the complete answer
0.31 is the answer when the hundredths place is asked
What can scientists do or use to predict when and where natural hazards could occur?
Answer:
Earth Scientists Use Fractals To Measure And Predict Natural Disasters.
Explanation:
Answer:they can use fractals
Explanation:
A kerosene stove that produces 0.8 g/hr of carbon monoxide (CO) is used in a closed room with a volume of 200 m3. Fresh air enters the room at the rate of 40 m3/hr and stale air leaves at the same rate. Assuming complete mixing and that carbon monoxide is a conservative pollutant (i.e., does not undergo decay), determine the steady state CO concentration
Answer:
20 mg/m3
Explanation:
Given -
S = 0.8 g/hr
Q = 40m3/hr
V =200 m3
As we know, the steady state CO concentration is given by
Css = S/Q
= 0.8/(40m3/hr)
= 800 mg/hr/(40m3/hr)
= 20mg/m3
which changes when gases condense to form liquids
In condensation, matter changes from a gas to a liquid. All matter is made of tiny moving particles called molecules. Evaporation and condensation happen when these molecules gain or lose energy. This energy exists in the form of heat.
Potassium nitrate, bKNO3 , is 38.7% potassium by mass. If you have 300 grams of KNO; how many grams of potassium can you extract from it?
Mass of Potassium : 116.1 g
Further explanationGiven
38.7% potassium in Potassium nitrate
300 g of KNO3
Required
mass of potassium
Solution
%mass of element = (mass of an element in 1 mole of compound/mass of 1 mole compound) x 100%
mass of K(potassium) in 300 g KNO3 :
= 38.7% x 300 g
= 116.1 g
1. Imagine that you need to take a medicine that the doctor has prescribed for
you. Explain why scientists who developed that medicine would need to know
whether or not the compound in that medicine is polar. How might a polar
medicine behave differently as it dissolved in the body than a nonpolar medicine
would? Answer in 1 to 2 paragraphs. (10 points) Think about how polar and
nonpolar compounds might behave differently in the watery environment of your
stomach or bloodstream
Answer: Only non-polar medicines can diffuse across the membrane. non-polar drugs are lipid soluble, while polar drugs are water soluble, so polar drugs cant absorb through biological membranes.
If H3O+ is an acid according to Brønsted-Lowry, what is its conjugate base?
Select one:
Need ASAP please
a. H4O2+(aq)
b. H+(aq)
c. H2O(aq)
d. OH-(aq)
Answer:
C. H20(aq)
Explanation:
How many moles are in 3.69 x 1022 atoms of Ag?
Answer:
I'm assuming that 1022 is supposed to be 10^22, or 10 to the 22nd power. If that is the case, then the answer is 0.0612956811 mol. Round it to the number that you are supposed to round it to.
How many hydrogen atoms are in the compound represented by the following bond-line drawing?
ОН
Answer:
Theres no drawing
Explanation:
Show drawing
Skeletal structural diagram and bond-line drawing are similar;
Parts of the question appear missing: The number of hydrogen atoms in the attached example bond-line drawing is 6 hydrogen atoms
The reason the above value is arrived at for the attached example bond-line diagram is as follows;
A bond-line drawing is the diagram showing the molecular structure of a compound, such that covalent bonds within the molecule are represented by lines with the number of lines indicating the number of covalent bonds.
A single covalent bond is represented by one line, double bonds by two lines while three parallel lines represents a triple bond.
In bond-line drawing, the lines symbolically infer the carbon to carbon bonds while the bonds to the hydrogen atoms are implied noting that each carbon has four covalent bonds. Hydrogen atoms attached to other heteroatoms are indicated with an H.
The number of hydrogen shown in the example diagram can be found by noting that the number of covalent bonds between the carbon atoms are three, therefore, the atom of the fourth bond not shown with a line is to a hydrogen atom
There are six such carbon atoms, one of which is attached to an oxygen atom, which gives five hydrogen atoms located on the ring
There is one more hydrogen atom attached to the oxygen in the hydroxyl group, the total number of hydrogen is therefore;
5 hydrogen on ring + One hydrogen in the hydroxyl group = 6 hydrogen atoms
Learn more about bond-line drawing here:
https://brainly.com/question/13265901
How to calculate the orbital period of earth
Answer:
By observing the time between transits, we know the orbital period. Kepler's Third law can be used to determine the orbital radius of the planet if the mass of the orbiting star is known (R3=T2−Mstar/Msun, the radius is in AU and the period is in earth years)
hope this helps you out
Iontophoresis is a noninvasive process that transports drugs through the skin without needles. In the photo, the red electrode is positive and the black electrode is negative. The electric field between the electrodes will drive the negatively charged molecules of an anesthetic through the skin. Should the drug be placed at the red or the black electrode
Answer:
Follows are the explanation to this question:
Explanation:
When the drug is negatively charged, its negative electrolyte is annihilated to just the positive electrode. It is enticed, and it may not have a picture showing the electrode, however, We suppose that electrodes from either side of a skin slice. Its negative electrode will bypass or push thru the skin if in front of the counter terminal this becomes a red-positive electrode.
What does the symbol (s) represent when it is next to an atom?
Answer:
The symbol for an atom indicates the element via its usual two letter symbol, the mass number as a left superscript, the atomic number as a left subscript (sometimes omitted), and the charge as a right superscript.
Explanation:
I hope that helps!! sorry if it dont!
Hurry I need Now!!!In which biome would the climax species be reached most quickly following a fire?
A Taiga
B desert
C Grassland
D. deciduous forest
E tropical rain forest
Answer:
D. Deciduous Forest.
Explanation:
15 The picture shows Earth’s rotation. Which pattern listed below is caused by Earth’s rotation? A Water cycle processes B Length of shadows C Seasonal temperatures D Weathering and erosion HELP ME
Answer:
jayfeather friend me
Explanation:
Hence it is quite important to understand and learn the processes of the water cycle.
Step 1: Evaporation. The water cycle starts with evaporation. ...
Step 2: Condensation. ...
Step 3: Sublimation. ...
Step 4: Precipitation. ...
Step 5: Transpiration. ...
Step 6: Runoff. ...
Step 7: Infiltration.