Answer:
B. Color change
3&5
hope this helps <3
have a great day/night
-Dan
Which substances are subject to avogadro law?
Answer:
Avogadro's law (sometimes referred to as Avogadro's hypothesis or Avogadro's principle) is an experimental gas law relating the volume of a gas to the amount of substance of gas present.[1] The law is a specific case of the ideal gas law. A modern statement is:
Avogadro's law states that "equal volumes of all gases, at the same temperature and pressure, have the same number of molecules."[1]
For a given mass of an ideal gas, the volume and amount (moles) of the gas are directly proportional if the temperature and pressure are constant.
The law is named after Amedeo Avogadro who, in 1812,[2][3] hypothesized that two given samples of an ideal gas, of the same volume and at the same temperature and pressure, contain the same number of molecules. As an example, equal volumes of molecular hydrogen and nitrogen contain the same number of molecules when they are at the same temperature and pressure, and observe ideal gas behavior. In practice, real gases show small deviations from the ideal behavior and the law holds only approximately, but is still a useful approximation for scientists.
I hope helps you and if you want and you consider you can give me a brainly crown
Part A
According to the following balanced reaction, how many moles of Ca(OH)2 will be formed from 4.33 moles of H₂O?
The number of moles of Ca(OH)2 formed is 4.33 moles.
Given,
number of moles of H₂O = 4.33
The balanced equation is :
CaO + H₂0 → Ca(OH)₂
From the balanced chemical reaction, we conclude that,
As 1 moles of H₂O react with 1 mole of Ca(OH)₂
Then, 4.33 moles of H₂O will react with 4.33 moles of H₂O.
Thus, the number of moles of Ca(OH)₂ formed will be 4.33 moles.
To learn more about Ca(OH)₂ visit the link:
https://brainly.com/question/308899?referrer=searchResults
#SPJ9
I need these done please
Answer:
A, it is metal oxide
Which atom would be expected to have a half-filled 6s subshell
Answer: I think the answer is Cesium (Cs)
Explanation:
A half-filled 6s subshell would be 6s^1
What volume of 0.26 M H2SO4 can be prepared by diluting 125 mL of 5.1 M H2SO4?
______L
Answer:
2451.9 ml
Explanation:
M1V1 = M2 V2
M1 = 5.1M
V1 = 125ml
M2=0.26M
V2= ?
V2= M1 V1/M2
V2 = 5.1*125/0.26
V2 = 2451.9 ml
How many aluminums are in the chemical formula of 2AI²(S0³)³?
Answer:
4
General Formulas and Concepts:
Chemistry
Identifying Moles/Atoms and CompoundsExplanation:
Step 1: Define
Al₂(SO₃)₃ - Aluminum Sulfide
2Al₂(SO₃)₃
Step 2: Identify
In Aluminum Sulfide, we have 2 Al's for every 3 SO₃²⁻'s.
So far, we have 2 Al's in total.
BUT, since we have a 2 coefficient in 2Al₂(SO₃)₃, we need to multiply by 2.
Therefore, we have 4 Al's in total.
4 Nitrogen monoxide reacts with oxygen like this:
2NO(gas) + O2(gas) -> 2NO2 (gas)
a. How many moles of oxygen molecules react
with I mole of nitrogen monoxide molecules?
b. What volume of oxygen will react with
50 cm of nitrogen monoxide?
c. Using the volumes in b, what is:
i. the total volume of the two reactants?
ii. the volume of nitrogen dioxide formed?
a. mol O₂=0.5
b. volume O₂ = 25 cm³
c. i. the total volume of the two reactants = 75 cm³
c. ii. the volume of nitrogen dioxide formed = 50 cm³
Further explanationReaction
2NO(gas) + O₂(gas) ⇒ 2NO₂ (gas)
a.
mol NO = 1
From the equation, mol ratio NO : O₂ = 2 : 1, so mol O₂ :
[tex]\tt \dfrac{1}{2}\times 1=0.5[/tex]
b.
From Avogadro's hypothesis, at the same temperature and pressure, the ratio of gas volume will be equal to the ratio of gas moles
Because mol ratio NO : O₂ = 2 : 1, so volume O₂ :
[tex]\tt \dfrac{1}{2}\times 50~cm^3=25~cm^3[/tex]
c.
i. total volume of reactants : 25 cm³+ 50 cm³=75 cm³
ii. the volume of nitrogen dioxide formed :
mol ratio NO : NO₂ = 2 : 2, so volume NO₂ = volume NO = 50 cm³
The stem and leaves of the plant in the diagram above are exhibiting which behavior?
Answer:
Try to go to quizzlet
Explanation:
Answer:
j
Explanation:
Calculate the molar mass of menthol, C10H20O
Answer:
C10H200
Explanation:
The molecular formula C10H20O (molar mass : 156.27 g/mol) may refer to: Citronellol. Decanal.
The molar mass of menthol ([tex]\rm C_10H_{20}O[/tex]) is 156.3 g/mol.
To calculate the molar mass of menthol ([tex]\rm C_10H_{20}O[/tex]), we need to determine the sum of the atomic masses of all the individual atoms in the compound.
The atomic masses of the elements are as follows:
C (carbon) = 12.01 g/mol
H (hydrogen) = 1.01 g/mol
O (oxygen) = 16.00 g/mol
Now, let's calculate the molar mass of menthol:
Molar mass of menthol = (10 * molar mass of C) + (20 * molar mass of H) + (1 * molar mass of O)
= (10 * 12.01 g/mol) + (20 * 1.01 g/mol) + (1 * 16.00 g/mol)
= 120.1 g/mol + 20.2 g/mol + 16.0 g/mol
= 156.3 g/mol
Therefore, the molar mass of menthol ([tex]\rm C_10H_{20}O[/tex]) is 156.3 g/mol.
Know more about molar mass:
https://brainly.com/question/31545539
#SPJ6
The teal line of the hydrogen emission spectrum has a wavelength of 486.0 nm.486.0 nm. Calculate the energy of one photon of this light.
Answer:
4.086 × 10⁻¹⁹ J
Explanation:
Step 1: Given and required data
Wavelength of the teal line of the hydrogen emission spectrum (λ): 486.0 nmSpeed of light (c): 2.997 × 10⁸ m/sPlanck's constant (h): 6.626 × 10⁻³⁴ J.sStep 2: Convert "λ" to meters
We will use the conversion factor 1 m = 10⁹ nm.
486.0 nm × 1 m/10⁹ nm = 4.860 × 10⁻⁷ m
Step 3: Calculate the energy of one photon of this light
We will use the Planck-Einstein's relation.
E = h × c / λ
E = 6.626 × 10⁻³⁴ J.s × 2.997 × 10⁸ m/s / 4.860 × 10⁻⁷ m
E = 4.086 × 10⁻¹⁹ J
You are given 10ml (M) 20 Naoh solution in a conical flask and asked to titrate with (M) 20 Hcl and (M) 20 H2so4 separately. calculate the moles of Hcl and H2so4 required to neutralize the Naoh solution
Answer:
[tex]n_{HCl}=0.2molHCl\\n_{H_2SO_4}=0.1molH_2SO_4[/tex]
Explanation:
Hello!
In this case, since the reactions between NaOH and the acids are:
[tex]NaOH+HCl\rightarrow NaCl+H_2O\\\\2NaOH+H_2SO_4\rightarrow Na_2SO_4+2H_2O[/tex]
Whereas we can see the 1:1 and 2:1 mole ratios between NaOH and HCl and H2SO4 respectively. In such a way, at the equivalence point we realize that:
[tex]n_{HCl}=n_{NaOH}=V_{NaOH}M_{NaOH}=0.01L*20mol/L=0.2molHCl\\\\2n_{H_2SO_4}=n_{NaOH}\\\\n_{H_2SO_4}=\frac{1}{2} V_{NaOH}M_{NaOH}=\frac{0.01L*20mol/L}{2} =0.1molH_2SO_4[/tex]
Best regards!
the mass of the empty graduated cylinder is 35.101 g. if 12.33 g of water is added to this cylinder, what is the total mass?
The total mass of the cylinder and the water is 47.431g.
How to calculate mass?According to this question, the mass of an empty graduated cylinder is 35.101 g.
A graduated cylinder is known to be an item of glass laboratory equipment consisting of a tall, narrow cylinder with a scale, or graduations marked up its length, which is used to measure liquids and solutions fairly accurately, but not precisely.
If 12.33 g of water is added to this cylinder, the total mass of the cylinder and the water that was added can be calculated as follows:
Total mass = 12.33g (water) + 35.101g (empty cylinder) = 47.431g
Therefore, the total mass of the cylinder and the water is 47.431g.
Learn more about mass at: https://brainly.com/question/17552181
#SPJ1
the burning of fossil fuels produces what kind of energy
Answer:
When fossil fuels are burned carbon and hydrogen react with oxygen in air to carbon dioxide (CO2) and water (H2O). During this reaction heat is released which further amplifies the reaction. Electricity is generated by transforming mechanical energy (heat) to electrical energy in a turbine or generator.
Explanation:
Which gas law is represented by the following equation: P1/T1 = P2/T2
O none of these
Avogadro's law
Charles's law
Gay-Lussac's law
Boyle's law
Answer:
none of these
Explanation:
The expression:
P1/T1 = P2/T2 is a derivative of the combined gas law.
From the combination of the Boyle's and Charles's law, if the volume is taken to be constant, the pressure of the given mass of gas is directly proportional to the absolute temperature.
This is how the expression
P1/T1 = P2/T2 was obtained.
Consider a copper-zinc corrosion couple. If the current density at the copper cathode is 0.05 A/cm2, calculate the weight loss of zinc per hour if the copper cathode area is 100 cm2 and the zinc anode area is 1 cm2 . Group of answer choices 0.061 g/h 6.1 g/h 61 g/h
Answer: the weight loss of zinc per hour is 6.1 g/h
Option c) 6.1 g/h is the correct answer.
Explanation:
Given that
copper cathode area is = 100 cm²
zinc anode area = 1 cm²
current density at the copper cathode = 0.05 A/cm²
The corrosion current can be converted to a rate of metal loss from its surface by using Faraday's law
W = ItM / nF
W is weight loss of metal , I is current ,
I = iCu × ACu = 0.05 A/cm² x 100 cm² = 5.0 A
M is atomic weight of metal
Atomic mass of Zn = 65.38 g/mol
n = number of electron
F = Faraday’s constant = 96,500 C/mol
so we substitute
W loss of Zn = (5 A) × (3600/h) (65.38 g/mol) / [2 × (96,500 C/mol) ]
= 1176840 / 193000
= 6.098 ≈ 6.1 g/h
Therefore the weight loss of zinc per hour is 6.1 g/h
Option c) 6.1 g/h is the correct answer.
What must be known for the rate constant to be calculated from the rate law?
A. The temperature at the beginning if the reaction
B. The reaction rate at known product concentrations
C. The reaction rate at known reaction concentrations
D. The activation energy the reaction must overcome
Answer:
C. The reaction rate at known reaction concentrations
Explanation:
The rate of a reaction is the measure of the speed of a chemical reaction. To find the rate constant of a reaction, the concentration of the reactants must be known.
Reaction rate is directly proportional to the concentration of the reactants. The quantitative relationship between the rate of a reaction and the concentrations of reactants is expressed as the rate law. From this we can deduce the rate constant.Answer:
C. ApE x Approved
Explanation:
Trust
30) Which of the following two atoms are isotopes?
Answer:
The correct is the letter B
What volume of 0.220 M HBr solution (in mL) is required to obtain 0.060 moles of HBr?
Answer:
273 mL.
Explanation:
From the question given above, the following data were obtained:
Molarity of HBr = 0.220 M
Mole of HBr = 0.060 mole
Volume =?
Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:
Molarity = mole /Volume
With the above formula, we can obtain the volume required as illustrated below:
Molarity of HBr = 0.220 M
Mole of HBr = 0.060 mole
Volume =?
Molarity = mole /Volume
0.220 = 0.060 / Volume
Cross multiply
0.220 × Volume = 0.060
Divide both side by 0.220
Volume = 0.060 / 0.220
Volume = 0.273 L
Finally, we shall convert 0.273 L to millilitres (mL). This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.273 L = 0.273 L × 1000 mL / 1 L
0.273 L = 273 mL
Thus, 0.273 L is equivalent to 273 mL.
From the calculations made above, 273 mL of HBr is required.
The volume of 0.220 M HBr solution (in mL) required to obtain 0.060 moles of HBr is 272.7mL
From the question,
We are to determine the volume of 0.220M HBr solution that is required to obtain 0.060 moles of HBr.
To determine this, we will use the formula connecting number of moles, concentration and volume
From the formula,
Number of moles = Concentration × Volume
Then,
[tex]Volume = \frac{Number \ of \ moles}{Concentration}[/tex]
From the question,
Concentration of the HBr solution = 0.220 M
Required number of moles of HBr = 0.060 moles
∴ [tex]Volume \ of \ HBr \ required = \frac{0.060}{0.220}[/tex]
Volume of HBr required = 0.272727 L
Now, we will convert this to milliliter (mL)
(NOTE: 1L = 1000 mL)
∴ 0.272727 L = 0.272727 × 1000 mL
= 272.727 mL
≅ 272.7 mL
Hence, the volume of 0.220 M HBr solution (in mL) required to obtain 0.060 moles of HBr is 272.7mL
Learn more here: https://brainly.com/question/23868730
Can someone explain how to do this?
Balanced equation :
3H₂+N₂⇒2NH₃
Further explanationEqualization of chemical reaction equations can be done using variables. Steps in equalizing the reaction equation:
1. gives a coefficient on substances involved in the equation of reaction such as a, b, or c etc.
2. make an equation based on the similarity of the number of atoms where the number of atoms = coefficient × index between reactant and product
3. Select the coefficient of the substance with the most complex chemical formula equal to 1
Unbalanced⇒the number of atoms from both sides (reactants and products) is not the same
H₂+N₂⇒NH₃
H=2(left), H=3(right)
N=2(left), N=1(right)
Balanced ⇒ the number of atoms from both sides (reactants and products) is equal
3H₂+N₂⇒2NH₃
H=3x2=6(left), H=2x3=6(right)
N=2(left), N=2x1=2(right)
A 2.89 g sample of a metal chloride, MCl2, is dissolved in water and treated with excess aqueous silver nitrate. The silver chloride that formed weighed 6.41 g. Calculate the molar mass of M. Question 3 options: 70.9 g/mol 29 g/mol 58.0 g/mol 65 g/mol 72.4 g/mol
Answer:
58.0 g/mol
Explanation:
The reaction that takes place is:
MCl₂ + 2AgNO₃ → 2AgCl + M(NO₃)₂First we calculate how many moles of silver chloride were produced, using its molar mass:
6.41 g AgCl ÷ 143.32 g/mol = 0.0447 mol AgClThen we convert AgCl moles into MCl₂ moles, using the stoichiometric ratio:
0.0447 mol AgCl * [tex]\frac{1molMCl_2}{2molAgCl}[/tex] = 0.0224 mol MCl₂Now we calculate the molar mass of MCl₂, using the original mass of the sample:
2.86 g / 0.0224 mol = 127.68 g/molWe can write the molar mass of MCl₂ as:
Molar Mass MCl₂ = Molar Mass of M + (Molar Mass of Cl)*2127.68 g/mol = Molar Mass of M + (35.45 g/mol)*2Finally we calculate the molar mass of M:
Molar Mass of M = 57 g/molThe closest option is 58.0 g/mol.
Every cell in an organism has the same number of chromosomes, except:
A.)Skin cells
B.)Neurons
C.)White blood cells
D.)Reproductive cells
Answer: omg this is so old! :D but its D!
Explanation:
The cells that has been composed of the indifferent number chromosomes as compared to other cells have been reproductive cells. Thus, option D is correct.
Cells have been the smallest and the unit of life. The cells have been composed of the pairs of chromosomes in higher organisms. There has been the presence of 46 chromosomes i.e. 23 pairs of chromosome. However, the chromosomes in the cell have been diploid i.e. in set of 2.
The reproductive cells have been resulted in the formation of the new cells. So they have been consisted of the cells with the half the number of chromosomes and are haploid in nature.
Thus, the cells that have different number of chromosomes as compared to the other cells have been reproductive cells. Thus, option D is correct.
For more information about the chromosomes, refer to the link;
https://brainly.com/question/1596925
Determine whether each observation describes a chemical or a physical property. 1. When a piece of sodium metal is placed in a test tube with water, the sodium zees and bubbles of gas are formed. 2. When table salt is added to water in a test tube, the table salt dissolves. . 3. When a glass marble is heated and then quickly cooled, it shatters. *
1.Sodium metal reacts rapidly with water to form a colorless solution of sodium hydroxide ... strip is placed in a test tube containing 5 mL of hydrochloric acid, HCl. Both liquids ... If it fizzes and bubbles
2.When salt is mixed with water, the salt dissolves because the covalent bonds of water are stronger than the ionic bonds in the salt molecules.
3.When platinum is heated, then cooled to its original state, we say this is a physical change. 19. ... Scratches glass. Sour taste ... A bar of lead is more easily bent than is a bar of aluminum of the same size.
What does it mean for a gene to be active?
Answer: You should be able to find the answer on the internet
Based on the information that is given, which atom is the table ?
Answer:
The one with the greatest mass would be the one that has the most things in the nucleus, protons and nutrons
Explanation:
barium chloride + sodium phosphate
Answer with double displacement
Answer:
Barium chloride + Sodium phosphate → barium phosphate + sodium chloride
Explanation:
Double replacement:
It is the reaction in which two compound exchange their ions and form new compounds.
AB + CD → AC +BD
Chemical equation:
BaCl₂ + Na₃PO₄ → Ba₃(PO₄)₂ + NaCl
Balanced chemical equation:
3BaCl₂ + 2Na₃PO₄ → Ba₃(PO₄)₂ + 6NaCl
The cation and anion of both reactants are exchanged with each other.
Ba²⁺ react with PO₄³⁻ and form Ba₃(PO₄)₂ while Cl⁻ react with Na⁺ and form sodium chloride.
Molecular equation:
Barium chloride + Sodium phosphate → barium phosphate + sodium chloride
Please help me I need these answers
1 is true
2 is d 7
3 is
1 e
2 b
3 d
4 a
5 c
If the specific heat of water is 4.184 J/g∙°C, how much heat is required to increase the temperature of 1.500g of water from 23 °C to 39 °C? (show your work) Units count
Answer:
Q = 100.42 J
Explanation:
Given data:
Mass of water = 1.500 g
Specific heat capacity of water = 4.184 J/g.°C
Heat required = ?
Initial temperature = 23°C
Final temperature = 39°C
Solution:
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 39°C - 23°C
ΔT = 16°C
Q = 1.500 g× 4.184 J/g.°C ×16°C
Q = 100.42 J
why dont fish fly bcs they have tiny wings
Answer:
okay....
Explanation:
technically, fish do not have wings. they are called fins and they are used for the purpose of transportation, just as legs are for humans.
~Ren
The law of conservation of mass can be demonstrated by a chemical reaction. Which of the
following models of a chemical reaction best represents the law of conservation of mass?
Answer : It’s C.
Cccccccccccccccccccccccccccccccccccccccc
The model of the chemical reaction that best represent the law of conservation of mass is the model with a balanced equation.
The correct answer to the question is the third option.
The law of conservation of matter states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.The statement above, suggest that unbalanced equation simply means matter has been created or destroyed.
Therefore, the correct answer to the question given above will be the option in which the equation is balanced.
The option with a balanced equation is the third option.
See attachment photo.
Learn more: https://brainly.com/question/23986198
HELP if water vapor condense on a cold surface is the initial and final energy thermal, phase, or chemical?