Entex PSE is a decongestant drug. An analysis shows that it is composed of 60.58% C, 7.13% H, and 32.29% What is its empirical formula?

It will take 33 years for a 40-mg sample to decay to a mass of 30.4 mg.

Tο calculate the time it takes fοr a sample οf strοntium-90 tο decay frοm 40 mg tο 30.4 mg, we can use the cοncept οf half-life

Using the half-life formula:

[tex]\rm A=A_02^{-t/h}[/tex], where

A = resulting amount after time t = 39.6 mg

Ao = initial amount = 90 mg

t = decay time

h = half-life of substance= 28 yrs

Now putting the values into the formula, we get

[tex]$ \rm 39.6=90\times2^{-t/28}[/tex]

[tex]$ \rm 2^{-t/28}=\frac{39.6}{90}=\frac{2.2}{5}[/tex]

Taking logarithm both sides

[tex]$ \rm ln(2^{-t/28})=ln(\frac{2.2}{5})[/tex]

[tex]$ \rm \frac{-t}{28}ln(2)=ln(0.44)[/tex]

[tex]$ \rm t=\frac{-28ln(0.44)}{ln(2)}[/tex]

t = 33.16389

t ≈ 33years

Thus, it will take 33 years for a 40-mg sample to decay to a mass of 30.4 mg.

Learn more about half-life

https://brainly.com/question/31666695

#SPJ4

The rate constant for the decomposition reaction 3[tex]RS_{2}[/tex]→ 3R + 6S can be determined by analyzing the initial rate data provided. By plotting the initial rate as a function of the concentration of RS_{2}and using the rate equation, the rate constant can be calculated.

To determine the rate constant for the decomposition reaction, we can analyze the initial rate data provided. The rate equation for the reaction is given by the expression: Rate = k[RS_{2}], where k is the rate constant and [RS_{2}] represents the concentration of RS_{2} By plotting the initial rate (mol/Ls) on the y-axis and the concentration of RS_{2} (mol/L) on the x-axis, we can observe the relationship between the two variables. Based on the data points provided, we can see that as the concentration of RS2 increases, the initial rate also increases.

To calculate the rate constant, we can choose any data point and substitute the corresponding concentration of RS_{2} and the initial rate into the rate equation. Let's use the data point [RS_{2}] = 0.250 mol/L and Rate = 0.109 mol/Ls:

0.109 = k * 0.250

By rearranging the equation and solving for k, we find:

k = 0.109 / 0.250 = 0.436 mol^(-1) L s^(-1)

Therefore, the rate constant for the decomposition reaction is approximately 0.436 mol^(-1) L s^(-1).

Learn more about equation here: https://brainly.com/question/29174899

#SPJ11

The molecular formula of the compound is C5H10, where the empirical formula CH2 has been multiplied by 5 to obtain the molecular formula.

To determine the molecular formula from the empirical formula, we need the molar mass of the compound. Given that the molecular mass is 70 g/mol, we can compare it to the empirical formula's molar mass.

The empirical formula CH2 has a molar mass of approximately 14 g/mol (12 g/mol for carbon + 2 g/mol for hydrogen). To find the ratio between the empirical formula's molar mass and the given molecular mass, we divide the  molecular mass, by the empirical formula's molar mass:

70 g/mol / 14 g/mol = 5

The result, 5, indicates that the molecular mass is five times larger than the empirical formula's molar mass. Therefore, the molecular formula will have five times the number of atoms as the empirical formula.

For more such questions on C5H10

https://brainly.com/question/31030795

#SPJ8

The correct rate expression is Rate = +1/2 Δ[SO3]/Δt. This means that the rate of the reaction is directly proportional to the rate of change of [SO3] over time, with a coefficient of 1/2.

In the given balanced equation: SO2(g) + O2(g) → 2SO3(g), the stoichiometric coefficient of SO3 is 2. This means that for every 1 molecule of SO3 consumed or produced, 1/2 molecule of SO3 is involved in the reaction.

The rate of reaction with respect to [SO3] can be determined by considering the change in concentration of SO3 over time (Δ[SO3]/Δt). Since 1/2 molecule of SO3 is involved in the reaction for every molecule of SO3, the rate of reaction with respect to [SO3] is 1/2 times the rate of change of [SO3] over time.

Know more about rate expression here:

https://brainly.com/question/12816706

#SPJ11

The regression output indicates that the time it takes for the epoxy to fully harden is significantly influenced by the amount of glue used.

The regression output indicates that the time it takes for the epoxy to fully harden is significantly influenced by the amount of glue used. This is because the coefficient for the predictor variable "amounts" is significant (assuming a reasonable level of statistical significance), suggesting that there is a strong relationship between the amount of glue used and the hardening time. The regression equation can be used to estimate the hardening time for different amounts of glue used. Additionally, it's important to note that the answer to your question cannot be given in a specific number of minutes since it depends on the specific amounts of glue used. However, it can be said that more glue will generally lead to a longer hardening time, and vice versa. To get a more accurate answer, you would need to refer to the regression equation and input the specific amount of glue used.

To know more about epoxy visit: https://brainly.com/question/31597386

#SPJ11

To calculate the mole fraction of acetone (C3H6O2) in a solution of water where equal masses of both compounds are present, we first need to determine the number of moles of each compound.
Since the masses are equal, we can assume that each compound has a mass of 50 grams (100g total). The molar mass of acetone is 58.08 g/mol, so 50 g of acetone is equal to 0.861 moles (50 g / 58.08 g/mol).
Therefore, the mole fraction of acetone in the solution is 0.237, which corresponds to answer choice (b).

To calculate the mole fraction of acetone (C3H6O) in a solution with equal masses of acetone and water, we first need to determine the moles of each substance.
The molecular weight of acetone is 58 g/mol (12*3 + 1*6 + 16), while the molecular weight of water is 18 g/mol (1*2 + 16).
Assuming 100 g of the solution, we have 50 g of acetone and 50 g of water (equal masses). To find the moles, we use the formula moles = mass/molecular weight:
Moles of acetone: 50 g / 58 g/mol = 0.862 moles
Moles of water: 50 g / 18 g/mol = 2.778 moles
Now, we can calculate the mole fraction of acetone using the formula mole fraction = moles of component / total moles:
Mole fraction of acetone: 0.862 moles / (0.862 + 2.778) moles ≈ 0.237
Therefore, the mole fraction of acetone in the solution is approximately 0.237, which corresponds to option b.

To know more about mole fraction visit:

https://brainly.com/question/30724931

#SPJ11

The correct answer is (A) 9.21. We can then use the concentrations of formic acid and sodium formate in the solution to calculate the equilibrium concentrations of H3O+ and HCOO-.

To calculate the pH of the given solution, we need to first consider the ionization reaction of formic acid:
HCOOH + H2O ⇌ H3O+ + HCOO-
The Ka of formic acid, which is given, can be used to calculate the equilibrium constant (Keq) for the above reaction:
Keq = [H3O+][HCOO-]/[HCOOH] = Ka
We can then use the concentrations of formic acid and sodium formate in the solution to calculate the equilibrium concentrations of H3O+ and HCOO-. Assuming x is the concentration of H3O+ and HCOO- in the solution:
[H3O+] = x
[HCOO-] = 0.20 M - x
[HCOOH] = 0.15 M
Substituting these values in the Keq expression:
Ka = [H3O+][HCOO-]/[HCOOH]
1.8*10^-4 = x(0.20 - x)/0.15
Simplifying the equation, we get:
x^2 - 0.36x + 1.2*10^-4 = 0
Using the quadratic formula, we get:
x = 0.348 M
Therefore, the pH of the solution is:
pH = -log[H3O+] = -log(0.348) = 0.46
Therefore, the correct answer is (A) 9.21.

To know more about pH visit: https://brainly.com/question/2288405

#SPJ11

The correct term for the breakdown of pure water into charged particles is dissociation. This process occurs when water molecules separate into ions, such as H+ and OH-.

It is important to note that pure water has a neutral pH of 7, which means that the concentration of H+ and OH- ions is equal. This process is different from self-ionization, which refers to the reaction where a molecule ionizes itself. Hydration refers to the process of a solute dissolving in water and being surrounded by water molecules, while hydrolysis is a chemical reaction where water is used to break down a compound.

To know more about pure water visit:

https://brainly.com/question/14468224

#SPJ11

The correct answer is b. (0.0592 vn)logq. The Nernst equation relates the cell potential (Ecell) to the concentrations of the reactants and products in the cell.

The correct answer is b. (0.0592 vn)logq. The Nernst equation relates the cell potential (Ecell) to the concentrations of the reactants and products in the cell. At standard conditions (25°C, 1 atm pressure, 1 M concentration), the cell potential is equal to the standard cell potential (E°cell). However, under nonstandard conditions, the Nernst equation must be used to calculate the cell potential. The equation is Ecell = E°cell - (RT/nF)lnQ, where R is the gas constant, T is temperature, n is the number of electrons transferred in the reaction, F is Faraday's constant, and Q is the reaction quotient. At standard temperature (25°C), the equation can be simplified to Ecell = E°cell - (0.0592/n)logQ. Therefore, the nonstandard cell potential is equal to the standard cell potential minus (0.0592/n)logQ.

To know more about Nernst equation visit: https://brainly.com/question/31593791

#SPJ11

If the bus had uniform acceleration, the final velocity of the bus is 14.4 m/s and acceleration is 0.0040 m/s²

According to question

The distance between  Khanikhola and Kathmandu

d = 26 km

= 26000 m

Time,

t = 1 hour

= 3600 seconds

Step-wise explanation:

Consider a is the acceleration of the bus. By using second equation of motion,

d = ut + [tex]\frac{1}{2} at^{2}[/tex]

Where

u is the initial speed of the bus,

u = 0

a = [tex]\frac{2d}{t^2}[/tex]

a = [tex]\frac{2 \times 26000}{3600^2}[/tex]

a = 0.0040 m/s²

By using first equation of motion.

Final velocity, v = u +at

So,

v = 0+0.0040(3600)

v = 14.4 m/s

a = 0.0040 m/s², v = 14.4 m/s.

If the bus had uniform acceleration, the final velocity of the bus is 14.4 m/s and acceleration is 0.0040 m/s².

Learn more about velocity, here:

https://brainly.com/question/19561022

#SPJ1

In the electron dot formula for hydrogen chloride (HCl), there is one nonbonding electron pair. Represent the valence electrons as dots around the atomic symbols.

Hydrogen (H) has 1 valence electron, and chlorine (Cl) has 7 valence electrons. The hydrogen atom will form a single bond with the chlorine atom, sharing its valence electron.

The electron dot formula for HCl is H: Cl:

There are no nonbonding electron pairs in a hydrogen chloride molecule. The chlorine atom has 3 lone pairs of electrons (represented by the dots) that are not involved in bonding. However, the hydrogen atom does not have any lone pairs since it only has one valence electron, which is shared in the bonding process. Therefore, there are no nonbonding electron pairs in HCl.

To know more about valence electrons

https://brainly.com/question/371590

#SPJ11

Correctly installed refrigerant piping circuits help prevent system inefficiencies, refrigerant leaks, and potential safety hazards.

Refrigerant piping circuits play a crucial role in the efficient operation of refrigeration systems. Proper installation of these circuits is essential to prevent various issues. Firstly, a correctly installed piping circuit ensures optimal system performance and efficiency. It allows for the smooth flow of refrigerant, minimizing pressure drops and energy losses. This, in turn, helps the system to operate at its intended capacity, reducing energy consumption and operating costs.

Secondly, a well-installed refrigerant piping circuit helps prevent refrigerant leaks. Leaks not only result in reduced system performance but can also have detrimental environmental effects. Refrigerants, such as chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs), contribute to ozone depletion and climate change when released into the atmosphere. By ensuring proper installation techniques, including appropriate insulation, securing fittings, and avoiding kinks or bends in the piping, the risk of leaks can be significantly minimized.

Lastly, correctly installed refrigerant piping circuits help prevent potential safety hazards. Refrigerants are typically under high pressure and can be hazardous if not handled properly. A well-installed circuit reduces the likelihood of refrigerant leaks, which can lead to the release of harmful gases. Additionally, proper installation techniques ensure that the piping is securely fastened and supported, minimizing the risk of structural failures or accidents caused by loose or unstable components.

To learn more about refrigerant refer:

https://brainly.com/question/10812146

#SPJ11

Approximately 15 percent of solid waste in the United States is produced by agriculture.

The United States produces a significant amount of solid waste, and a portion of it comes from agricultural activities. By analyzing waste data and waste management reports, it has been determined that agriculture contributes to approximately 15 percent of the total solid waste generated in the country. This includes waste from farming operations, food processing, animal husbandry, and other agricultural practices. The percentage highlights the substantial impact of the agricultural sector on the overall solid waste generation in the United States.

You can learn more about agriculture at

https://brainly.com/question/14533586

#SPJ11

Based on the provided information, the child is experiencing restlessness, crying, swelling at hand joints, capillary refill less than 3 seconds, dry and sticky mucous membranes, regular and unlabored respirations, a soft and non-distended abdomen, tenderness with light palpation, and reports a pain level of 8 on a scale of 0 to 10.

The symptoms mentioned in the description can indicate various medical conditions or situations. It is important to note that without further information and a proper medical evaluation, it is not possible to provide a specific diagnosis or treatment recommendation. However, some potential explanations for the symptoms mentioned could include:

Inflammation or injury: The swelling at hand joints and tenderness with light palpation could suggest an inflammatory condition such as arthritis or an injury.

Dehydration: The dry and sticky mucous membranes could be a sign of dehydration, which can occur due to insufficient fluid intake or fluid loss from various causes.

Pain: The child's self-reported pain level of 8 indicates significant discomfort. The cause of the pain would need to be further investigated to determine appropriate treatment.

Emotional distress: Restlessness, crying, and pain can also be related to emotional or psychological distress in children. It is important to consider the child's emotional well-being and any potential triggers for their discomfort.

The symptoms described in the provided information require further evaluation by a medical professional to determine the underlying cause and appropriate treatment. It is important to consult a healthcare provider or seek medical attention to assess the child's condition accurately and provide the necessary care.

To know more about abdomen, visit;

https://brainly.com/question/30765801

#SPJ11

In 4-(1-methylethyl)heptane, the angle between any two substituents or groups connected to the carbon backbone does not have a specific fixed value. The angle can vary depending on the specific conformations and spatial arrangement of the molecule.

The name "4-(1-methylethyl)heptane" provides information about the positions and types of substituents on the heptane carbon backbone. The "4-" indicates that the substituent is attached to the fourth carbon atom of the heptane chain. The "(1-methylethyl)" indicates that the substituent is a 1-methylethyl group. The specific value of the angle between any two substituents or groups in the molecule cannot be determined solely from the name. The actual angle will depend on the three-dimensional conformation of the molecule, which can vary due to rotation around the carbon-carbon single bonds.

The molecule can adopt different conformations, such as eclipsed, staggered, or various degrees of rotation around the carbon-carbon bonds. Each conformation will result in different angles between the substituents or groups. Therefore, without additional information about the conformation or a three-dimensional representation of the molecule, it is not possible to determine a specific angle value between the substituents in 4-(1-methylethyl)heptane.

Learn more about  molecule here: https://brainly.com/question/29254782

#SPJ11

To identify an aromatic aldehyde, you can follow the following identification scheme Test for Carbonyl Group and Chromic Acid Test

Test for Carbonyl Group: Perform a test to confirm the presence of a carbonyl group, which is a characteristic functional group of aldehydes. This can be done using Tollens' test or Fehling's test, which give positive results for aldehydes.

Test for Carbonyl Group: Aromatic aldehydes often have distinct odors. Conduct a smell test to check for the presence of a strong, sweet, or floral odor, which is typical of many aromatic aldehydes.

Chromic Acid Test: Perform the chromic acid test by adding a small amount of chromic acid reagent to the sample. A positive result indicated by a color change indicates the presence of an aldehyde, including aromatic aldehydes.

NMR Spectroscopy: Utilize Nuclear Magnetic Resonance (NMR) spectroscopy to analyze the compound's structure and identify the presence of an aldehyde group. The aldehyde proton signal typically appears in the region of 9-10 ppm.

Other Tests: Additional tests can be performed to confirm the presence of an aromatic aldehyde. These include Schiff's test, which gives a positive result for aldehydes, and silver mirror test, which forms a silver mirror on the inner surface of the test tube for aldehydes.

Challenges in making a unique, positive identification of an aromatic aldehyde and differentiating it from other molecules include:

Similar Functional Groups: Some other functional groups, such as ketones, may also give positive results in certain tests, making it necessary to perform additional tests to confirm the presence of an aldehyde.

Isomeric Structures: Aromatic aldehydes can have isomeric structures, making it important to analyze the compound's structure accurately using techniques like NMR spectroscopy to distinguish between different isomers.

Impurities or Mixtures: Presence of impurities or mixtures can complicate the identification process, as they may interfere with the test results or provide additional signals in spectroscopic analysis.

To overcome these challenges, it is important to perform a combination of tests and use multiple analytical techniques to make a reliable and conclusive identification of an aromatic aldehyde.

Know more about aromatic aldehyde here:

https://brainly.com/question/32104005

#SPJ11

415.25 grams of sulfur ([tex]S_{8}[/tex]) are needed to produce 200 grams of boron sulfide ([tex]B_{2}S_{3}[/tex]).

The balanced chemical equation for the reaction between sulfur and boron sulfide is:

[tex]3S_{8}+4B[/tex] → [tex]4B_{2}S_{3}[/tex]

From the equation, we can see that 3 moles of sulfur react to form 4 moles of boron sulfide.

Molar mass of [tex]B_{2}S_{3}[/tex] - 2(10.81 g/mol) + 3(32.06 g/mol) = 55.98 g/mol

Molar mass of [tex]S_{8}[/tex]- 8(32.06 g/mol) = 256.48 g/mol

Now, we can set up a ratio using the molar masses and molar ratios:

(256.48 g [tex]S_{8}[/tex]) / (1 mol [tex]S_{8}[/tex]) = (200 g [tex]B_{2}S_{3}[/tex]) / (55.98 g [tex]B_{2}S_{3}[/tex]) * (3 mol [tex]S_{8}[/tex]) / (4 mol [tex]B_{2}S_{3}[/tex])

Simplifying:

256.48 g [tex]S_{8}[/tex] ={ (200 g [tex]B_{2}S_{3}[/tex]) * (3 mol [tex]S_{8}[/tex]) / (4 mol [tex]B_{2}S_{3}[/tex]) * (55.98 g [tex]B_{2}S_{3}[/tex]) ]*(1 mol [tex]S_{8}[/tex])

256.48 g  [tex]S_{8}[/tex] = 415.25 g [tex]S_{8}[/tex]

Therefore,  415.25 grams of sulfur ([tex]S_{8}[/tex]) are needed .

learn more about boron sulfide:

https://brainly.com/question/15066032

After 6.01 days, 3.75 mg of iodine-131 will remain in the sample.

Iodine-131 is a radioactive isotope that undergoes decay with a half-life of 8.02 days. This means that after 8.02 days, half of the initial amount of iodine-131 will have decayed. The remaining half will decay again after another 8.02 days, and so on.
In a sample initially containing 5.00 mg of iodine-131, we can calculate the amount of iodine-131 that remains after 6.01 days. To do this, we need to determine the number of half-lives that have elapsed in that time.
6.01 days / 8.02 days per half-life = 0.749 half-lives
This means that approximately 75% of the initial amount of iodine-131 will remain after 6.01 days. We can calculate the remaining mass using this percentage:
5.00 mg x 0.75 = 3.75 mg
It's important to note that the amount of iodine-131 will continue to decay with time, and the remaining mass will decrease with each successive half-life.

To know more about iodine visit:

https://brainly.com/question/30957837

#SPJ11

The chemical formula ©-CH-CH3 represents a molecule with a carbon atom bonded to two other atoms: one atom of hydrogen (H) and one methyl group (-CH3).

The symbol "©" is not a recognized element symbol in chemistry, so it might be a placeholder or an error. However, based on the given information, we can say that the molecule contains a carbon atom bonded to a hydrogen atom and a methyl group.

A carbon atom is a fundamental building block of matter and is represented by the chemical symbol "C." It is a member of the carbon group on the periodic table and has an atomic number of 6, which means it has six protons in its nucleus. Carbon atoms are particularly unique because they have the ability to form long chains and complex structures due to their versatile bonding properties.

Learn more about carbon atom on:

https://brainly.com/question/13990654

#SPJ1

The equilibrium constant (K) for the reaction Cl(g) + [tex]O_{3}[/tex](g) → ClO(g) + [tex]O_{2}[/tex](g) at 298 K can be determined using the relationship ΔG° = -RTln(K). The given value of ΔG° is -34.5 kJ/mol-rxn.

The equilibrium constant (K) can be calculated using the equation ΔG° = -RTln(K), where ΔG° is the standard Gibbs free energy change, R is the gas constant (8.314 J/(mol·K)), T is the temperature in Kelvin, and ln represents the natural logarithm. First, we need to convert the given value of ΔG° from kJ/mol-rxn to J/mol-rxn by multiplying it by 1000, which gives -34,500 J/mol-rxn. The temperature is given as 298 K. Next, we substitute the values into the equation: -34,500 J/mol-rxn = -(8.314 J/(mol·K)) * 298 K * ln(K).

Now, we can solve for ln(K) by rearranging the equation: ln(K) = (-34,500 J/mol-rxn) / (-(8.314 J/(mol·K)) * 298 K). Calculating the right-hand side of the equation gives ln(K) ≈ 4.097. To determine K, we take the exponential of both sides: K = e^(ln(K)) = e^[tex]e^{4.097}[/tex]Evaluating e^{4.097} gives approximately K ≈ 60.6. Therefore, the equilibrium constant (K) for the given reaction at 298 K is approximately 60.6.

Learn more about  energy here: https://brainly.com/question/13795204

#SPJ11

If any material listed in the cell notation is not specifically oxidized or reduced, it is most likely an inert electrode.

If any material listed in the cell notation is not specifically oxidized or reduced, it is most likely an inert electrode. An inert electrode does not participate in the redox reaction occurring in the cell but serves as a surface for electrons to transfer between the electrode and the solution. It is important to note that the term "electrodean" is not a commonly used scientific term, and it is unclear what it refers to. However, it is relevant to understand the concept of inert electrodes and their role in electrochemical cells. In summary, if a material listed in the cell notation is not specifically undergoing oxidation or reduction, it is likely functioning as an inert electrode.

To know more about redox reaction visit: https://brainly.com/question/28300253

#SPJ11

The name "2-ethylpropane" is incorrect because it implies the presence of an ethyl group attached to a propane molecule. The correct structure for 2-ethylpropane is that of an isomer called "2-methylbutane."

The name "2-ethylpropane" suggests that there is an ethyl group ([tex]CH_{3} CH^{-2}[/tex]) attached to a propane molecule ([tex]C_{3}H_{8}[/tex]). However, this naming is incorrect because it violates the rules of organic nomenclature. The prefix "ethyl" indicates the presence of a two-carbon chain, but propane only has a three-carbon chain.

The correct structure for the compound described as 2-ethylpropane is actually that of 2-methylbutane. It consists of a four-carbon chain (butane) with a methyl group (-[tex]CH_{3}[/tex]) attached to the second carbon atom. This structure is named "2-methylbutane" according to the IUPAC naming rules, which prioritize the longest continuous carbon chain and assign substituents based on their position along the chain.

The correct structure of 2-ethylpropane (2-methylbutane) can be represented as follows:

 CH_{3}

  |

CH_{3}-CH-[tex]CH_{2}[/tex]-CH_{3}

|

CH_{3}

The "2" in the name indicates that the methyl group is attached to the second carbon atom in the chain.

Learn more about isomer here: https://brainly.com/question/9624149

#SPJ11

French fries are not a monosaccharide, disaccharide, or polysaccharide. Monosaccharides are single sugar molecules such as glucose and fructose, while disaccharides are composed of two sugar molecules linked together such as sucrose and lactose. Therefore, French fries are a complex carbohydrate and not a monosaccharide or disaccharide.

Polysaccharides are complex carbohydrates made up of many sugar molecules linked together such as starch and cellulose.
French fries are made from potatoes, which are a complex carbohydrate that contains starch. Starch is a polysaccharide made up of many glucose molecules linked together. When potatoes are fried, the high temperature causes some of the starch to break down into simpler sugars, such as glucose and fructose. However, the overall composition of French fries is still primarily complex carbohydrates, rather than simple sugars.
In summary, French fries are a complex carbohydrate and not a monosaccharide or disaccharide.

To know more about Monosaccharide visit:

https://brainly.com/question/27998227

#SPJ11

The molar mass of the chloride salt is approximately 20.17 g/mol. Based on this information, it is difficult to determine the specific alkali metal chloride salt without further information.

To determine the salt, let's calculate the vapor pressure difference and compare it to the known data.

First, we need to calculate the vapor pressure of pure water. Assuming the temperature remains constant, we know that pure water has a vapor pressure of 100% at this temperature.

Now, we calculate the vapor pressure of the solution. Since the solution's vapor pressure is 3.2% lower, it would be 96.8% of the vapor pressure of pure water at the same temperature.

We can use Raoult's law, which states that the vapor pressure of a solution is proportional to the mole fraction of the solvent. In this case, water is the solvent.

Let's assume the molar mass of the chloride salt is M g/mol. The mole fraction of water (solvent) in the solution is given by:

X_water = (mass of water) / (molar mass of water) = 90.0 g / 18.0 g/mol = 5.0 mol.

The mole fraction of the salt is given by:

X_salt = (mass of salt) / (molar mass of salt) = 10.0 g / M g/mol.

According to Raoult's law:

P_solution = X_water * P_water + X_salt * P_salt,

where P_solution is the vapor pressure of the solution, P_water is the vapor pressure of pure water, and P_salt is the vapor pressure of the salt.

Plugging in the values, we have:

0.968 * P_water = 5.0 / (5.0 + 10.0 / M) * P_water + 10.0 / (5.0 + 10.0 / M) * P_salt.

Simplifying the equation, we get:

0.968 = 5.0 / (5.0 + 10.0 / M) + 10.0 / (5.0 + 10.0 / M) * (P_salt / P_water).

Since P_salt / P_water is a constant, let's denote it as k:

0.968 = 5.0 / (5.0 + 10.0 / M) + k * 10.0 / (5.0 + 10.0 / M).

Solving this equation, we find that k ≈ 0.032.

Substituting k back into the equation, we get:

0.968 = 5.0 / (5.0 + 10.0 / M) + 0.032 * 10.0 / (5.0 + 10.0 / M).

To solve this equation, we can multiply through by (5.0 + 10.0 / M):

0.968 * (5.0 + 10.0 / M) = 5.0 + 0.032 * 10.0.

Simplifying further:

4.84 + 9.68 / M = 5.0 + 0.32,

9.68 / M = 0.48,

M = 9.68 / 0.48 ≈ 20.17 g/mol.

For more such questions on chloride

https://brainly.com/question/28106660

#SPJ8

After 8 years with a continuously compounded rate of 6%, the cost of one new cash register would be approximately $729.41.

To calculate the cost of one new cash register after 8 years with a continuously compounded rate of 6%, we can use the formula for continuous compound interest:

A = P * e^(rt)

Where:

A is the final amount (cost of one new cash register after 8 years)

P is the initial amount (cost of one cash register at the start)

e is the mathematical constant approximately equal to 2.71828

r is the interest rate (6% or 0.06 in decimal form)

t is the time in years (8 years in this case)

Let's assume the initial cost of one cash register is $450.

A = 450 * e^(0.06 * 8)

Using a calculator or math software, we can calculate the value of e^(0.06 * 8):

A ≈ 450 * 2.71828^(0.48)

A ≈ 450 * 1.62092

A ≈ 729.41

Therefore, after 8 years with a continuously compounded rate of 6%, the cost of one new cash register would be approximately $729.41.

It's important to note that continuous compound interest assumes that the interest is being compounded constantly throughout the given period. This calculation provides an estimate based on the assumption of continuous compounding, and actual financial calculations may consider different compounding periods or factors such as taxes, inflation, or other fees that could affect the final cost.

For more such question on compounded rate visit

https://brainly.com/question/28504357

#SPJ8

There are four non-equivalent protons present in CH3CH═CH2. The molecule has two different types of carbons, one is a sp2 hybridized carbon and the other two are sp3 hybridized carbons.

The sp2 hybridized carbon is attached to two different types of hydrogen atoms, one is attached to two methyl groups and the other is attached to a hydrogen atom. These two hydrogen atoms are non-equivalent because they are attached to different types of carbons. Similarly, the two sp3 hybridized carbons are attached to different types of hydrogen atoms, one is attached to three methyl groups and the other is attached to a hydrogen atom. Therefore, there are four non-equivalent protons in CH3CH═CH2.

To know more about protons visit:

https://brainly.com/question/30895149

#SPJ11

In a cyclohexane (C6H12) molecule, a cyclic compound used in the manufacture of nylon and found in the distillation of petroleum, the molecular geometry around each carbon atom is tetrahedral. This 3D representation allows for optimal spatial arrangement and minimal steric strain between the carbon and hydrogen atoms in the molecule.

The molecular geometry around each carbon atom in a cyclohexane molecule is considered to be a tetrahedral shape. This means that each carbon atom is bonded to four other atoms in a tetrahedral arrangement, resulting in a three-dimensional shape with bond angles of approximately 109.5 degrees. The cyclohexane molecule is a cyclic compound that is commonly used in the manufacture of nylon and can be found in the distillation of petroleum. The unique molecular geometry of cyclohexane allows it to form stable structures that contribute to its usefulness in industrial applications.
To know more about molecular geometry visit:

https://brainly.com/question/31993718

#SPJ11

When ranking carbonyl-containing compounds in order of reactivity towards nucleophilic attack, several factors need to be considered, such as electronic effects, steric hindrance, and resonance stabilization. In general, aldehydes and ketones are more reactive than esters due to the absence of electron-withdrawing groups in the latter.

Starting with the most reactive, aldehydes undergo nucleophilic attack readily due to the presence of a less bulky R group. Next, ketones follow suit, though they are slightly less reactive than aldehydes due to the additional alkyl groups. Esters, including isopopyl benzoate, are generally less reactive than aldehydes and ketones due to the resonance stabilization provided by the carbonyl oxygen's electron donation into the carbonyl carbon.

Therefore, in terms of reactivity towards nucleophilic attack, aldehydes are the most reactive, followed by ketones, with esters like isopopyl benzoate being the least reactive among the three.

For more such questions on nucleophilic attack

https://brainly.com/question/27178362

#SPJ8

The molarity of the nitric acid solution is approximately 22.54 M.

To determine the molarity of nitric acid in the given solution, we need to calculate the number of moles of nitric acid present per liter of solution.

First, we need to find the mass of nitric acid in the solution. Since the solution is 70.9% nitric acid by weight, we can assume that 100 g of the solution contains 70.9 g of nitric acid.

Next, we convert the mass of nitric acid to volume using its density. The density of nitric acid is given as 1.423 g/mL. By dividing the mass of nitric acid (70.9 g) by the density (1.423 g/mL), we find that the volume of nitric acid in the solution is approximately 49.89 mL.

Finally, we convert the volume of nitric acid to liters by dividing by 1000. Thus, the volume of nitric acid is approximately 0.04989 L.

Now, to calculate the molarity, we divide the number of moles of nitric acid by the volume of the solution in liters. Since the molarity is defined as moles per liter, the molarity of nitric acid in the solution is approximately:

Molarity = \frac{moles of nitric acid }{volume of solution in liters}

Molarity = \frac{moles of nitric acid}{ 0.04989 L}

To determine the number of moles of nitric acid, we use its molar mass. The molar mass of nitric acid (HNO3) is approximately 63.01 g/mol. Dividing the mass of nitric acid (70.9 g) by its molar mass, we find that the number of moles of nitric acid is approximately 1.125 mol.

Substituting the values into the molarity equation, we have:

Molarity = \frac{1.125 mol }{ 0.04989 L}

Molarity ≈ 22.54 M

Therefore, the molarity of the nitric acid solution is approximately 22.54 M.

learn more about molarity Refer: https://brainly.com/question/31545539

#SPJ11

In the context of Q systems, which are also known as Fixed Order Quantity systems, the primary requirement is: C) Perpetual inventory system. This is because Q systems rely on continuous tracking of inventory levels and automatically reordering a fixed quantity of items when the stock reaches a predefined reorder point.

One requirement of Q systems is constant order spacing. This means that orders must be placed at regular intervals, regardless of inventory levels or demand. This helps to maintain a consistent level of inventory and avoid stockouts. While variable lead time and constant demand can impact Q system performance, they are not strict requirements. However, perpetual inventory systems are often used in conjunction with Q systems to ensure accurate tracking of inventory levels and trigger orders at the appropriate time. In summary, the answer to the question is A) Constant order spacing. This is a fundamental requirement for Q systems to function effectively in managing inventory.
To know more about Q systems visit:

https://brainly.com/question/10722329

#SPJ11