Explain why water can take many different paths while moving though the water cycle

Answer:

[tex]k=8.63x10^{-8}\frac{1}{M*s}[/tex]

Explanation:

Hello!

In this case, since the differential rate law of a second-order reaction is:

[tex]\frac{dC_A}{dt}=-kC_A^2[/tex]

Whereas A stands for NOCl and the corresponding integrated rate law is:

[tex]\frac{1}{C_A} =kt+\frac{1}{C_A_0}[/tex]

Thus, since we know the concentrations and the elapsed time, we compute the rate constant as shown below:

[tex]k=( \frac{1}{C_A}-\frac{1}{C_A_0} )/t\\\\k=( \frac{1}{0.83M}-\frac{1}{0.878M} )/763,200s\\\\k=8.63x10^{-8}\frac{1}{M*s}[/tex]

Best regards!

Answer:

Explanation:

25 Mass

The mass of the aluminum that has reacted is equal to 2.84 grams.

A chemical equation of a reaction contains of reactants, formed products, and an arrow indicating the direction of the given reaction. The balanced chemical equation in which the number of atoms is equal on either side of the equation. The law of conservation of mass should be followed by a balanced equation.

The chemical equation of the reaction of the KOH and Al is :

[tex]Al + KOH + H_2O \longrightarrow KAl(OH)_4 + H_2[/tex]

From the above equation, we can say that one mole of aluminum is reacting with one mole of KOH.

Given the volume and concentration of KOH are 35 ml and 3.0 M.

The moles of KOH = 3 × 0.035 = 0.105 mol

Therefore, the moles of Al will react = 0.105 mol

The mass of Al will react with KOH = 0.105 × 27 = 2.84 g

Learn more about the balanced chemical equation, here:

brainly.com/question/15052184

#SPJ5

Option ( C ). Hydrolysis (/haɪˈdrɒlɪsɪs/; ancient Greek for "water" and "to dissolve") is a chemical reaction in which water molecules break one or more chemical bonds.)

What does the example of hydrolysis mean?

Hydrolysis is the process of breaking down compounds by adding water. Here is an example of hydrolysis:

Sodium acetate is a type of salt. When sodium acetate is mixed with water, the chemical bonds are broken and it breaks down into sodium ions and acetate ions.

What is function of hydrolysis?

Hydrolysis reactions break the bonds and release energy. Biopolymers are ingested and hydrolyzed in the gastrointestinal tract to form small molecules that can be absorbed by cells and further broken down to release energy.  

Where does the hydrolysis take place?

Hydrolysis is the process by which compounds are broken down into simpler compounds and involves the chemical uptake of water. Almost all tissues contain enzymes that catalyze hydrolysis, but the highest concentration is in the liver.

To know more about Hydrolysis visit here:

https://brainly.com/question/30457911

#SPJ1

Answer:

Explanation:

1

When elements in group 2 react with Iodine, a salt MI_2 is formed

2

When they react with water, Hydrogen gas is released

3

When they react with Oxygen, an Oxide, MO is formed

4

The most vigorously reactive metal in group 2 is Barium, Ba. Reactivity increases as one moves downward in group 2

5

The most metallic element is Barium, Ba. This is because in the periodic table, metallic strength of metals increases as one moves down the table.

The thing that happens when the elements in group 2 react with iodine is:

The way these elements react with water is:

The way they react with oxygen is:

The element which reacts the most vigorously  in group 2 is:

The element in the group which is the most metallic in character is:

Read more here:

https://brainly.com/question/16377112

Answer:

its B

Explanation:

Because its can only go cold to hot. -hope this help :)

Answer:

The correct answer would be C.) a line graph

Explanation:

I just did the assignment on edge 2020 and got it right

Answer:

Mass = 185.896 g

Explanation:

Given data:

Mass in gram = ?

Number of moles = 2.00 mol

Solution:

Formula:

Number of moles = mass/molar mass

Molar mass of cobalt (I) hydroxide =92.948 g/mol

by putting the values,

2.00 mol = Mass/92.948 g/mol

Mass = 2.00 mol × 92.948 g/mol

Mass = 185.896 g

Answer:

[tex]23.093\ \text{torr}[/tex]

Explanation:

[tex]M_g[/tex] = Molar mass of glucose = 180.2 g/mol

[tex]M_w[/tex] = Molar mass of water = 18 g/mol

[tex]m_g[/tex] = Mass of glucose = 76.6 g

[tex]m_w[/tex] = Mass of water = [tex]250\times 1\ \text{g/mL}=250\text{g}[/tex]

[tex]P_0[/tex] = Vapor pressure of pure water at 25°C = 23.8 torr

The mole fraction of glucose is

[tex]x_g=\dfrac{\dfrac{m_g}{M_g}}{\dfrac{m_g}{M_g}+\dfrac{m_w}{M_w}}=\dfrac{\dfrac{76.6}{180.2}}{\dfrac{76.6}{180.2}+\dfrac{250}{18}}\\\Rightarrow x_g=0.0297[/tex]

Mole fraction of the solute would be

[tex]\dfrac{P_0-P}{P_0}=x_g\\\Rightarrow 0.0297=\dfrac{23.8-P}{23.8}\\\Rightarrow P=23.8-0.0297\times23.8\\\Rightarrow P=23.093\ \text{torr}[/tex]

The vapor pressure of the solution is [tex]23.093\ \text{torr}[/tex].

Answer:

Sphere

Explanation:

The shape of the s-sublevel is spherical in shape.

This sublevel has an azimuthal quantum number of 0 and it is spherical in shape;

Answer:

a) 0.03050 = 3.050 × 10-²

b) 0.256 x 10°= 2.56 × 10-¹

c) 25.005 10 =​ 2.500510 × 10¹

Explanation:

Scientific notations is a way of making very large or very small numbers more comprehensive or simplified. It involves the use of power of ten (10^). The numbers are represented to the power of ten. The following format is used:

a x 10^b

where; a is a number or decimal number between 1 and 10 i.e less than 10 but greater than 1

b is the power of ten

To write a number in scientific notation,

- we move the decimal point right or left depending on whether we're trying to reduce or increase the number

- we count the number of times the decimal point was moved. This serves as the b in the format above.

For example,

a) 0.03050 = 3.050 × 10-²

The decimal point was moved rightward twice. This caused the ^-2 power.

b) 0.256 x 10°= 2.56 × 10-¹

The decimal point was moved rightward once. This caused the ^-1 power.

c) 25.005 10 =​ 2.500510 × 10¹

The decimal point was moved leftward once. This caused the ^1 power.

Answer:

(a) 6332.812 N (b) 1469.59  pounds.

Explanation:

Given that,

The surface area of the top of yu head is 25 cm x 25 cm

Area = 625 cm² = 0.0625 m²

Atmospheric pressure on it is 101325 Pa.

(a) Pressure acting on an object is given by force acting per unit area. It can be written as :

[tex]P=\dfrac{F}{A}\\\\F=PA\\\\F=101325\ Pa\times 0.0625\ m^2\\\\F=6332.812\ N[/tex]

6332.812 N of force is acting on your head at sea level.

(b) If area, A = 100 in²

We know that,

1 atm = 14.6959 pounds/in²

[tex]P=\dfrac{F}{A}\\\\F=PA\\\\F=14.6959 \ \text{Pounds}/in^2\times 100\ in^2\\\\F=1469.59\ \text{pounds}[/tex]

So, the force is 1469.59  pounds.

A. The force required to push your head at sea level is 6332.8125 N

B. The force in pound is 1469.59 lb

A. Determination of the force required at sea level.

Pressure (P) = 101325 Nm²

Area (A) = 25 cm × 25 cm = 0.25 m × 0.25 m = 0.0625 m²

P = F / A

Cross multiply

F = PA

F = 101325 × 0.0625

Therefore, the force required to push your head at sea level is 6332.8125 N

B. Determination of the force in pounds

Area (A) = 100 in²

Pressure (P) = 14.6959 pound / in²

F = PA

F = 14.6959 × 100

Learn more: https://brainly.com/question/13182194

Answer:

E = 3.6×10⁻¹⁹ J

Explanation:

Given data:

Wavelength = 550 nm  (550 ×10⁻⁹ nm)

Energy of wave = ?

Solution:

Formula:

E = h c/λ

c = 3×10⁸ m/s

h = 6.63×10⁻³⁴ Js

Now we will put the values in formula.

E = 6.63×10⁻³⁴ Js × 3×10⁸ m/s /550 ×10⁻⁹ nm

E = 19.89×10⁻²⁶ J.m /550 ×10⁻⁹ nm

E = 0.036×10⁻¹⁷ J

E = 3.6×10⁻¹⁹ J

Answer:

Answer: Tin (II) nitride

Answer:

1.6 L CH3OH

Explanation:

3.20 L H2 x (1 mol H2/22.4 L H2) x (1 mol CH3OH/2 mol H2) x (22.4 L CH3OH/1 mol CH3OH) = 1.60 LCH3OH

1.602 liters of CH₃OH gas are formed when 3.20 L of H₂ gas are completely reacted at STP according to the following chemical reaction:

CO(g) + 2 H₂(g) → CH₃OH(g)

Remember 1 mol of an ideal gas has a volume of 22.4 L at STP

To find the volume of CH₃OH gas formed when 3.20 L of H₂ gas is completely reacted, we need to use stoichiometry and the given balanced chemical equation.

The balanced equation is:

CO(g) + 2 H₂(g) → CH₃OH(g)

From the balanced equation, we can see that 1 mol of CO reacts with 2 moles of H₂ to produce 1 mole of CH₃OH.

Step 1: Convert the given volume of H₂ gas to moles at STP.

Using the information provided, 1 mol of any ideal gas at STP (Standard Temperature and Pressure) occupies 22.4 L.

Number of moles of H₂ gas = Volume of H2 gas at STP / Volume of 1 mol of H₂ gas at STP

Number of moles of H₂ gas = 3.20 L / 22.4 L/mol

Number of moles of H₂ gas = 0.14286 moles (rounded to 5 decimal places)

Step 2: Use stoichiometry to find the moles of CH₃OH formed.

From the balanced equation, we know that 1 mol of CO reacts with 2 moles of H₂ to produce 1 mole of CH₃OH.

Since the ratio of H₂ to CH₃OH is 2:1, the number of moles of CH₃OH formed will be half of the moles of H₂ used in the reaction.

Number of moles of CH₃OH = (1/2) * Number of moles of H₂

Number of moles of CH₃OH = (1/2) * 0.14286

Number of moles of CH₃OH = 0.07143 moles (rounded to 5 decimal places)

Step 3: Convert the moles of CH₃OH to volume at STP.

Using the information provided, 1 mol of any ideal gas at STP (Standard Temperature and Pressure) occupies 22.4 L.

Volume of CH₃OH gas at STP = Number of moles of CH₃OH * Volume of 1 mol of CH₃OH gas at STP

Volume of CH₃OH gas at STP = 0.07143 moles * 22.4 L/mol

Volume of CH₃OH gas at STP = 1.602 L (rounded to 3 decimal places)

Therefore, approximately 1.602 liters of CH₃OH gas are formed when 3.20 liters of H₂ gas are completely reacted at STP.

To know more about chemical reaction here

https://brainly.com/question/34137415

#SPJ2

K20

K = 1+

0 = 2-

K/0 = 1/2

the answer is K:O = 1:2

Answer:

i think it is ge

Explanation:

Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Therefore, the condensed electron configurations for the given element can be written as below.

Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.

The systematic distribution of electrons in the various atomic orbitals is called its electronic configuration. 1,2,3 represents the number of shells and s and represents the orbitals. The superscripts represents the number of electrons in each orbitals.

Electronic configuration of Mg   Ne 3s²

Electronic configuration of Ge   [Ar] 3d¹⁰ 4s² 4p²

Electronic configuration of Br    [Ar] 3d10 4s² 4p⁵

Electronic configuration of V     [Ar] 3d³ 4s²

Electronic configuration of  Y   [ Kr ]4d¹ 5s²

Electronic configuration of Lu     [Xe] 4f¹⁴ 5d¹6s²

Therefore, the condensed  electron configurations for the given element can be written as above.

To know more about element, here:

brainly.com/question/8460633

#SPJ2

[tex]\huge\boxed{OptionB}[/tex]

The superior vena cava (SVC) is the superior of the two venae cavae, It is located above inferior vena cava and it returns the deoxygenated blood from the systemic circulation to the right atrium of the heart.

The aorta is the main artery that carries blood away from your heart to the rest of your body.

The Left Atrium is one of the two atriums, it receives the oxygenated blood from the lungs via Pulmonary vein.

The Left Ventricle is one of the two ventricles, it receives the oxygenated blood by the Left atrium through the mitral valves. From the ventricle oxygenated blood is provided to the whole body.

Pulmonary Artery is one of the two pulmonary vessels which connect the blood heart and lung. Pulmonary Artery takes the deoxygenated blood from the Right ventricle to the Lungs from the oxygenation.

Answer: 10

Explanation:

4Al + 2O2 --> 2Al2O3

This is the balanced equation so there are 2*2 +2*3 = 4+6 =10

Answer:

0.548 moles of HBr are required

Explanation:

Given data:

Number of moles of  hydrobromic acid = ?

Moles of bromine formed = 0.274 mol

Solution:

Chemical equation:

2HBr     →   H₂  + Br₂

Now we will compare the moles of HBr with Br₂.

               Br₂           :           HBr

               1               :            2

               0.274       :           2×0.274=0.548

Thus, 0.548 moles of HBr are required.

Answer:

From the numerical steps highlighted under explanation, the average atomic mass of bromine is 79.91 u

Explanation:

The steps to be taken will involve;

1) Find the number of isotopes of bromine.

2) Identify the atomic mass and relative abundance of each of the isotopes.

3) Multiply the atomic mass of each of the isotopes by their corresponding values relative abundance value.

4) Add the value in step 3 above to get the average atomic mass of bromine.

Now;

Bromine has 2 isotopes namely;

Isotope 1: Atomic mass = 78.92amu and a relative abundance of 50.69%.

Isotope 2: Atomic mass = 80.92amu and a relative abundance of 49.31%.

Using step 3 above, we have;

(78.92 × 50.69%)

And (80.92 × 49.31%)

Using step 4 above, we have;

(78.92 × 50.69%) + (80.92 × 49.31%) ≈ 79.91 u

The atomic mass of bromine has been calculated as 79.9062 amu.

The relative atomic mass of the element has been given as the mass of each isotope with respect to their abundance.

The atomic mass has been given as:

[tex]amu=\sum mass\;\times\;\% Abundance[/tex]

The available isotopes of Bromine have been:

Isotope 1 = 78.92 amu, and 0.5069 % abundance

Isotope 2= 80.92 amu, and 0.4931 % abundance

Submitting the values for the atomic mass unit of bromine ([tex]amu_{\text{Br}}[/tex]):

[tex]amu_{\text {Br}}= (78.92\;\times\;0.5069)\;+\;(80.92\;\times\;0.4931)\\amu_{\text{Br}}=40.0045\;+\;39.9016\\amu_{\text{Br}}=79.9062[/tex]

The atomic mass of bromine has been calculated as 79.9062 amu.

For more information about atomic mass, refer to the link:

https://brainly.com/question/5566317

Answer:

2HBr + O2 = H20 +Br2

Explanation:

Answer:

4hbr(aq) + O2(g) = 2H2O + 2Br2

Explanation:

Answer:

A photon

Explanation:

When electrons pass close to the standing wave of light, they hit the particles that are called photons

Answer:

I believe its 1,2, and 5

Explanation:

C D E

temperature of medium

type of wave

type of medium

Answer:

See Explanation

Explanation:

Pb2O3 is better formulated as PbO.PbO2. It is actually a mixture of the two oxides of lead, lead II oxide and lead IV oxide.

This implies that this compound Pb2O3  (sometimes called lead sesquioxide) is a mixture of the oxides of lead in its two known oxidation states +II and +IV.

Hence Pb2O3  contains PbO and PbO2 units.

Answer:

there is your answer hope it helped :3

Answer:

[tex]T_b=239.7K=-33.49\°C[/tex]

Explanation:

Hello!

In this case, since the relationship between entropy and enthalpy for any process is defined below:

[tex]S=\frac{H}{T}[/tex]

For the vaporization of ammonia or any liquid, we can write:

[tex]\Delta S_{vap}=\frac{\Delta H_{vap}}{T_{vap}}[/tex]

In such a way, solving the temperature of vaporization, or boiling point, we have:

[tex]T_{vap}=\frac{\Delta H_{vap}}{\Delta S_{vap}}[/tex]

Plugging in the given enthalpy and entropy of vaporization we obtain:

[tex]T_{vap}=T_b=\frac{23350\frac{J}{mol} }{97.43\frac{J}{mol*K}} \\\\T_b=239.7K=-33.49\°C[/tex]

Best regards!

From the information provided in the question, the boiling point of ammonia is 240 K.

Entropy is the degree of disorderliness in a system. The entropy of a system can be obtained using the relation;

ΔS°vap = ΔH°vap /T

Now;

ΔH°vap = 23.35 kJ/mol

ΔS°vap = 97.43 J/mol·K

T = ?

Making T the subject of the formula and substituting values;

T = ΔH°vap /ΔS°vap

T = 23.35 × 10^3J/mol/97.43 J/mol·K

T = 240 K

Learn more: https://brainly.com/question/11155928

Answer:

Transition metals can have multiple oxidation states because of their electrons. The transition metals have several electrons with similar energies, so one or all of them can be removed, depending the circumstances. This results in different oxidation states.

Answer:

The answers are "partially filled" and "d" on Plato

Explanation:

Answer:

695.8kJ/mol = Enthalpy of combustion

Final temperature = 407.4°C

Explanation:

Taken the reaction:

2CH₃NO₂ + 3/2 O₂ → 2CO₂ + 3H₂O + N₂

The enthalpy of the reaction is the heat released when 1 mole of nitromethane are in combustion.

We need to find the moles presents in 121L of nitromethane using its density and molar mass (61.04g/mol). As these moles releases 1.6x10⁶kJ, we need to find heat released per mole of nitromethane

Mass nitromethane:

121L = 121000cm³ * (1.16g/cm³) = 140360g

Moles:

140360g * (1mol / 61.04g) = 2299.5 moles of nitromethane

Heat released per mole of nitromethane:

1.6x10⁶kJ / 2299.5 mol = 695.8kJ/mol = Enthalpy of combustion

The symbol - is because the heat is released, a + symbol is when the heat is absorbed.

Using:

Q = m×C×ΔT

Where Q is heat (1.6x10⁶kJ = 1.6x10⁹J)

m is mass of water:

1kL = 1000L = 1x10⁶mL = 1x10⁶g

C is specific heat of water: 4.184J/g°C

And ΔT is change in temperature.

Solving for ΔT:

1.6x10⁹J = 1x10⁶g * 4.184J/g°C * ΔT

ΔT = 382.4°C

As initial temperature was 25°C, final temperature is:

382.4°C + 25°C =

407.4°C