F=ma (pls help i need it)
the net force acting on an object is 10N as the object speeds up. what affect would applying 10x as much force have on the object? F=ma

Answers

Answer 1

The main affect would applying 10x as much force have on the object is the  covering of 10 times more distance as compared to the previous force because the force is 10 times.

What affect would applying 10x as much force have on the object?

If on movable object we apply 10x as much force then the object will move in the forward direct and accelerate more which leads to covering of distance 10 times more because we know that if one newton force is applied the body accelerate to 1 meter per second square so we apply 10 times more force so the body will accelerate 10 times and attain 10 times more distance. So that's why we can say that increasing force will lead to increase distance covered by the body.

So we can conclude that the main affect would applying 10x as much force have on the object is the  covering of 10 times more distance as compared to the previous force because the force is 10 times.

Learn more about force here: https://brainly.com/question/12785175

#SPJ1


Related Questions

a brick is dropped (zero initial speed) from the roof of a building. the brick strikes the ground in 1.90 s. you may ignore air resistance, so the brick is in free fall.

Answers

If A brick is dropped (zero initial speed) from the roof of a building. The brick strikes the ground in 1.90s then the building is 17.69 meters tall.

What is velocity?

Velocity is the directional speed of a moving item as an indication of its rate of change in position as seen from a specific frame of reference and measured by a specific time standard (e.g., 60 km/h northbound). The idea of velocity is crucial in kinematics, the part of classical mechanics that explains the motion of bodies.

A physical vector quantity called velocity requires both magnitude and direction to be defined. Speed is a coherent derived unit that expresses the scalar absolute value (magnitude) of velocity. Its quantity is expressed in SI units (metric system) of metres per second (m/s or ms1). For example, "5 meters per second" is a scalar while "5 meters per second east" is a vector.

We have given that

u = 0 m/s                          (initial velocity)

t = 1.90 s                           (time)

a = g = 9.80 m/s²             (acceleration = falling = gravity)

We will use the second equation of motion to determine the height(S) of the building in meters:

⇒ S =  [tex]ut + \frac{1}{2} at^2[/tex]

⇒ S = (0)(1.90) + [tex]\frac{1}{2}[/tex](9.80)(1.90)²

⇒ S = 4.9 × 3.61

       = 17.69 meters

Learn more about velocity

brainly.com/question/80295?source=archive

#SPJ4

Full question

A brick is dropped (zero initial speed) from the roof of a building. The brick strikes the ground in 1.90 s. You may ignore air resistance, so the brick is in free fall. (a) How tall, in meters, is the building?

13. How are controlled experiments useful?

Answers

The allow to get much more accurate results as there won't be any influences that you haven't controlled. The also ensure that the experiment is fair and that no outside influences have altered your results

The diagram shows how states of matter can change when energy is either added or removed.
System before change
System after change
00000
00000
00000
00000
00000
00000
00000
All of these statements below are true EXCEPT
Energy was added to the matter causing the particle movement to increase.
The matter changed states which is a physical change.
The particles in the matter before the change had more energy than after the change.
The particles in the matter before the change had less energy than after the change

Answers

A change in temperature frequently causes substances to change phases. Most substances are solid at low temperatures; as the temperature rises, they become liquid; and at still greater temperatures, they become gaseous.

Melting is the conversion of a solid into a liquid (an older term that you may see sometimes is fusion). Solidification is the process where a liquid turns into a solid. The melting point, or the temperature at which a pure substance begins to melt, is a property of that substance. A solid must expend energy to become a liquid. A specific quantity of energy is required by every pure substance in order to transform from a solid to a liquid. This amount is known as the substance's enthalpy of fusion (or heat of fusion).

The complete question is- The diagram shows how states of matter can change when energy is either added or removed.

System before change

System after change

00000

00000

00000

00000

00000

00000

00000

All of these statements below are true EXCEPT

Energy was added to the matter causing the particle movement to increase.

The matter changed states which is a physical change.

The particles in the matter before the change had more energy than after the change.

The particles in the matter before the change had less energy than after the change.

the diagram is attached below.

Learn more about temperature here-

https://brainly.com/question/11464844

#SPJ9

The biggest school in the world is in lucknow, india. it has more than 40,000 students and 2500 teachers! would it be easier to make new friends in a school with 40,000 kids than a school with fewer than 100 kids?

Answers

School population.

What is the population in school?The total number of full-time and part-time students who were enrolled in the institution during the reporting period.The biggest school in the world is the City Montessori School in Lucknow. With more over 45,000 students, it was included as the largest city school in the Guinness Book of World Records in 2013.The degree to which pupils engage with or participate in a lesson, course, etc.Education among the populace contributes to the well of their families and communities. Education about the population raises students' and teachers' awareness while also changing their attitudes.

The biggest school in the world is in lucknow, india. it has more than 40,000 students and 2500 teachers! would it be easier to make new friends in a school with 40,000 kids than a school with fewer than 100 kids? School population.

To learn more about the School population, refer to:

https://brainly.com/question/25896797

#SPJ4

how can i eat a pizza with my toes

Answers

Answer:

You grab (grasp or seize suddenly and roughly.) the pizza with your toes

Explanation:

Answer:

First, you have to wash your toes to get all the germs off.

Next, make sure you have a good grip on the pizza.

Then, make sure you are in a comfortable position.

Next, wrap your leg around your neck so the pizza can reach.

Finally, you can enjoy your pizza.

Hope this helped!

Name the three particles of the atom and their respective charges (positive, negative, neutral)

Answers

Answer:

Positive: Proton, Negative: Electron, Neutral: Neutron

Explanation:

the elastic cords used for bungee jumping are designed to endure large strains. consider a bungee cord that stretches to a maximum length 3.51 times the original length. there are different ways to report this extensional deformation.

Answers

The ratio of (ε true/ε engr) = (1.2556/2.51) = 0.5002

So, the engineering strain is around 0.5002 bit wrong from the value of the true strain. This calculated value of difference is known as the extensional deformation.

For finding out the Engineering strain,

Engineering strain is a unit used to describe how much a material deforms when subjected to a specific force. It is equal to the amount of deformation divided by the material's initial length in the direction of the applied force.

⇒ε(engineering) = ΔL/L₀

⇒Lₓ= final length = 3.51 L₀

⇒L₀ = original length = L₀

⇒ΔL = Lₓ- L₀

        = 3.51 L₀ - L₀

        = 2.51 L₀

⇒ε(engineering) = ΔL/L₀

                            = (2.51L₀)/L₀  

                            = 2.51

For finding out the True Strain,

Deformation is measured by True Strain. It can be calculated by integrating the strain across short time intervals and adding them up. Hence,

⇒ε(true) = In (Lₓ/L₀)

⇒Lₓ = 3.51L₀

⇒L₀ = L₀

⇒ε(true) = In (Lₓ/L₀)

              = In (3.51L₀/L₀)

              = In 3.51

              = 1.2556

So, dividing both the values, we get

(ε true/ε engr) = (1.2556/2.51) = 0.5002

The complete question is as follows:

The elastic cords used for bungee jumping are designed to endure large strains. Consider a bungee cord that stretches to a maximum length 3.51 times the original length. There are different ways to report this extensional deformation. Calculate how wrong' the engineering strain is compared to the true strain by evaluating the ratio: ε true/ε engr

To solve sums regarding extensional deformation go to https://brainly.com/question/15018276

#SPJ4

Imagine a time-position graph where the velocity of an object is constant. What will be observed on the graph concerning the slope of the line segment as well as the velocity of the object? (1 p
O The slope of the line is positive, and the object will be stationary.
O The slope of the line is negative, and the object will be stationary.
O The slope of the line is equal to zero and the object will be stationary.
O The slope of the line is equal to zero and the object will be in motion.

Answers

D. The slope of the line is equal to zero and the object will be in motion.

What is constant velocity?

Velocity of a body is said to be constant, if it covers equal distances in equal intervals of time, and also does not change the direction it is moving in

To have a constant velocity, an object must have a constant speed in a constant direction.

Slope of the position time graph

slope = change in velocity / change in time

if the velocity is constant, then change in velocity = 0

slope = 0/change in time = 0

In constant velocity, the object will be in motion, but the velocity of the object will not change.

Thus, the slope of the line is equal to zero and the object will be in motion.

Learn more about constant velocity here: https://brainly.com/question/529176

#SPJ1

====================================Position, Distance, and Displacement

========================================================

Hello! Lets begin!

1. Which answer best describes displacement?

A) Displacement is a vector quality showing total length of an area traveled by a particular object.

2. Kelley is playing pool and hits the cue into the nine ball, which is directly in the center of the pool table. The nine ball travels a total of 7 meters before stopping, 1 meter to the left of the initial starting point of the nine ball. Which sentence reflects the correct statement regarding distance and displacement when considering the motion of the nine ball?

D) The nine ball traveled a distance of 7 meters and was displaced by 1 meter.

3. What is velocity?

B) Velocity is a vector quantity that tells the distance an object has traveled over a period of time.

4. Imagine a time-position graph where the velocity of an object is constant. What will be observed on the graph concerning the slope of the line segment as well as the velocity of the object?

C) The slope of the line is equal to zero and the object will be stationary.

5. Select the option that best summarizes the reason for the use of position-time graphs when studying physical science.

B) The position-time graphs show the relationship between the position of an object (shown on the y-axis) and the time (shown on the x-axis) to show velocity.

_______________________________________________________

Good luck my peeps! ;D

A population of a tree snail species has different patterns in their shells. These slight differences in appearance among the individual members of the species are called variations. How do you think these variations get passed on from one generation of tree snails to the next? Select the answer that best matches your thinking.

Answers

The variations get passed on from one generation of tree snails to the next from both parents to offspring and through the environment (Option C is correct).

What is genetic variation?

The expression of genetic variation refers to differences in the nucleotide sequences between individuals of the same special which are passed across generations from parents to offspring and are selected by natural selection.

In conclusion, the variations get passed on from one generation of tree snails to the next from both parents to offspring and through the environment (Option C is correct).

Learn more about genetic variation here:

https://brainly.com/question/14926046

#SPJ1

Which phrase best describes the amplitude of longitudinal waves?
OA. The maximum pressure at a compression
B. The vertical distance from a trough to the midpoint
O C. The distance from a compression to a rarefaction
D. The vertical distance from the midpoint to a crest

Answers

C because it’s grime a compressor to a rare faction :)

What is the average speed across my bunny’s entire trip when she hops 6 meters to the east across the room in 11 seconds and then takes another 12 seconds to hop back to her initial position? Express your answer using the proper SI units round your to two decimal places include a direction if necessary
Help me asap calculating average velocity and speed

Answers

The average speed of bunny's entire trip is 0.52 m/s and her average velocity is 0 m/s.

What is average speed?

The average speed of an object is the ratio of total distance travelled to the total time of motion of the object.

V(speed) = total distance / total time of motion

V(speed) = (6 m + 6 m) / (11 s + 12 s)

V(speed) = (12 m) / (23 s)

V(speed) = 0.52 m/s

What is average velocity?

The average velocity of an object is the ratio of total displacement to total time of motion of the object.

V(velocity) = total displacement / total time of motion

V(velocity) = (6 m - 6m) / (11 s + 12 s)

V(velocity) = (0 m) / (23 s)

V(velocity) = 0 m/s

Thus, the average speed of bunny's entire trip is 0.52 m/s and her average velocity is 0 m/s.

Learn more about average speed here: https://brainly.com/question/6504879

#SPJ1

6. A person walks 60.0 m and then he walks 130 m.
What is the person's distance?

Answers

Answer:

130+60=190

Explanation:

i.e. if you asked for the distance covered by the person

Please help I will mark brainliest

Answers

Answer:

1.) B

2.) Polar Regions or high altitudes.

Explanation:

what comes to your mind when you think about the Energy, Forces, and Earth's Crust?

Answers

Welll I would think air but that’s rlly it :)

As a freely falling object picks up downward speed, what happens to the power supplied by the gravitational force?.

Answers

The power supplied by the gravitational force will increase because (Power=work/time).

What happens to a freely falling object's speed as it descends?

A falling object gains momentum as it descends.

An increase in air resistance is caused by a speed increase.

At some point, the force of air resistance grows strong enough to counteract the pull of gravity.

Since there is no net force at this point, the object will stop accelerating.

Although the direction and magnitude of velocity fluctuate, the acceleration caused by gravity remains constant and downward.

The ball has zero velocity at the highest point in its trajectory, and it picks up speed as it descends back toward the earth.

To learn more about speed, refer

https://brainly.com/question/24598572

#SPJ4

a neutron star is the remnant left after certain supernovae (explosions of giant stars). typically, neutron stars are about 21 km in diameter and have around the same mass as our sun. what is a typical neutron star density in g/cm3 ?

Answers

The density of the neutron star is  ρ = [tex]7.733[/tex]×[tex]10^{14}[/tex] [tex]g/cm^{3}[/tex].

What is a neutron star?

The volume of the neutron star is

V=([tex]4\pi /3[/tex])×[tex]R^{3}[/tex]

V= [tex]25.72^{17} cm^{3}[/tex]

Now the density of the neutron star is

ρ = M/V

ρ =  [tex]7.733[/tex]×[tex]10^{14}[/tex]g/[tex]cm^{3}[/tex]

The collapsing core of a large supergiant star with a total mass of between 10 and 25 solar masses—possibly even more if the star was very metal-rich—is what we refer to as a neutron star. Neutron stars are the tiniest and densest class of stellar objects currently known, with the exception of black holes and other hypothetical phenomena.

Although the galaxy may contain hundreds of millions of ancient neutron stars, only about 1,000 pulsars are known to exist. Although the enormous pressures found at neutron star cores may be similar to those at the moment of the big bang, conditions like this cannot be replicated on Earth.

To learn more about neutron star from the given link:

brainly.com/question/1322201

#SPJ4

Clara jogs 600 m in 5 minutes

Answers

The conventional approach to this question would be to find the velocity in metres per second, and then convert it to kilometres per hour.

But the easiest approach is more simple:

Distance = 600m = 0.6km

Time = 5min = (5/60)hrs = (1/12)hrs

Speed = Distance/Time = (0.6)/(1/12) = 12(0.6) = 7.2kmph

rajesh used a lens to burn a piece of paper.what is the lens?draw a ray diagram related to this process​

Answers

If we want to burn a paper by focusing sunlight then we have to use a converging lens that can converge all sunlight at a point called the focus.

Thus Convex lens is used to burn the paper.

What is the lens?

The transmissive optical device known as a lens employs refraction to focus or disperse a light beam. While a compound lens is made up of numerous simple lenses (elements), they are typically oriented along a common axis, as opposed to a simple lens, which is made up of a single transparent piece. Materials like glass or plastic are used to create lenses, which are then polished, ground, or molded into the desired shape. Unlike a prism, which refracts light without concentrating, a lens can focus light to create an image. Lenses are also used to describe instruments that focus or scatter waves of radiation other than visible light, such as explosives, microwaves, and electron lenses.

To know more about convex lens visit:- https://brainly.com/question/27038900

#SPJ4

which of the forces have infinite range? group of answer choices weak nuclear force only both gravitational and weak nuclear forces electromagnetic force only both electromagnetic and gravitational forces

Answers

The gravitational force and the electromagnetic force are the two forces that have infinite ranges.

There are four fundamental forces in nature. They are:

Gravitational forceElectromagnetic ForceWeak Nuclear ForceStrong Nuclear Force

The strength and range of the fundamental forces are mentioned in the table given in the adjoining image.

Out of the four forces, two forces are there whose range is infinite i.e gravitational force and electromagnetic force, and the other two forces i.e., weak nuclear force and strong nuclear force have extremely short ranges.

Thus, both gravitational force and electromagnetic force are two forces that have infinite ranges.

To know more about the "fundamental forces", refer to the following link:

https://brainly.com/question/28027715?referrer=searchResults

#SPJ4

A hockey player is standing on his skates on the Rideau Canal when an opposing player, moving with a uniform speed of 2.8 m/s, skates by with the puck. After 3.0 s, the first player makes up his mind to chase his opponent. If he accelerates uniformly at 3.5 m/s^2
a. How long does it take him to catch his opponent?
b. How far has he travelled in this time? (Assume the player with the puck remains in motion at a constant speed.)

Answers

After 3.0 s, If the first player makes up his mind to chase his opponent. If he accelerates uniformly at 3.5 m/s^2 then it would take 3.13 seconds to catch his opponent.

What are the three equations of motion?

There are three equations of motion given by  Newton,

v = u + at

S = ut + 1/2×a×t²

v² - u² = 2×a×s

As given in the problem, a hockey player is standing on his skates on the Rideau Canal when an opposing player, moving with a uniform speed of 2.8 m/s, skates by with the puck. After 3.0 s, the first player makes up his mind to chase his opponent. If he accelerates uniformly at 3.5 m/s^2,

Let us assume the time taken to catch up would be t seconds.

The distance traveled by the hockey player = 2.8×3 + 2.8×t

By using the second equation of the motion,

s = ut+0.5at²   = 2.8×3 + 2.8×t

1.75t² - 2.8t -8.4 = 0

t = 3.13 seconds

The distance traveled by the hockey player to catch up = 2.8×(3+3.13)

                                                                                             =17.164 meters

Thus, it would take 3.13 seconds to catch his opponent.

To learn more about equations of motion from here, refer to the link;

brainly.com/question/5955789

#SPJ1

if a resistor with a current of 20 ma through it converts 12 j of electrical energy into heat energy in 60 s, what is the voltage across the resistor?

Answers

The voltage across the resistor is 0.2V.

Heat energy is given as H = [tex]I^{2}[/tex]Rt.

What is a resistor ?

Voltage across the resistor is

V= 0.2v

12 = [tex]0.02^{2}[/tex]×R×60

R= 500 ohms.

voltage across the resistor is

V=IR

V=   0.02^{2} ×500

V= 0.2V

A resistor is an electrical component with two terminals that implements electrical resistance as a circuit element. Resistors are employed in electronic circuits for a variety of purposes, including lowering current flow, adjusting signal levels, dividing voltages, biasing active devices, and terminating transmission lines.

An electrical component known as a resistor controls or restricts the passage of electrical current in an electronic circuit. Additionally, resistors can be used to supply a specified voltage to an active device like a transistor.

To learn more about resistor  from the given link:

brainly.com/question/24297401

#SPJ4

To obtain the approximate short-circuit current values when two hot conductors of a 3-phase system are shorted together, use _____ percent of the 3-phase current value.

Answers

To obtain the approximate short-circuit current values when two hot conductors of a 3-phase system are shorted together, use _maximum percent of the 3-phase current value.

short circuit- It is an electrical circuit in which current finds a way to bypass the appliances on a path that has little or no resistance.

In the 3- phase system, there are three power wires which carries load.

most common. Types of three phase system are known as wye and delta.

Delta configuration has only three wires. Wye configuration may have a fourth, neutral ,wire.

To obtain the approximate short-circuit current values when two hot conductors of a 3-phase system are shorted together, use _maximum percent of the 3-phase current value.

To know more about current.

https://brainly.com/question/16017088

#SPJ1

When a coin is tossed in the air, it travels upward, gradually slows down, momentarily reaches zero speed, then moves back
downward with increasing speed. Which statement best explains this change in the coin's motion?


a.The force of gravity causes the coin to change its velocity.


b.The coin's inertia decreases on the way up and increases on the way down.


c.The action-reaction force pair of gravity and the applied force cancel each other.

d.The coin remains in its state of upward motion until the force.

Answers

A. The force of gravity causes the coin to change its velocity.

What is the effect of force gravity on the upward motion of an object?

Force of gravity always act toward the center of the earth , so when an object is thrown up, the force of gravity will act in opposite direction of motion, that's toward the center of earth.

This will cause the object moving upwards to slow down due to the force of gravity acting on the opposite direction of the object's upward motion.

When a coin is tossed in the air, it travels upward, gradually slows down, momentarily reaches zero speed, then moves back downward with increasing speed due to effect of force of gravity.

Thus, the statement that best explains the change in the coin's motion is "The force of gravity causes the coin to change its velocity".

Learn more about force of gravity here: https://brainly.com/question/10119978

#SPJ1

discrepancy between calculated charge and the accepted value of charge of electron

Answers

Charge of an electron, e = 1.60217662 × 10-19 coulombs whereas to calculate the charge of an electron it is not fixed as it may vary.

The charge of the electron is comparable to the size of the rudimentary charge (e) but bears a negative sign. Since the esteem of the rudimentary charge is generally 1.602 x 10-19 coulombs (C), at that point the charge of the electron is -1.602 x 10-19 C.

When communicated in nuclear units, the basic charge takes the esteem of solidarity, i.e., e = 1. In this way, the electron’s charge can be signified by -e. Even though the proton is much more gigantic than the electron, it was as it was including a charge of e.

Thus, impartial particles continuously bear the same number of protons and electrons.

JJ Thomson is the undisputed pioneer of the electron. Be that as it may, despite all those tests he performed on it, he might as it was overseen getting the electron’s charge to mass proportion.

Learn more about the charge of an electron at

https://brainly.com/question/2553023

#SPJ9

A plane is traveling 50m drops a package of explores of 134m the acceleration of gravity is 9.8 where does the package strike

Answers

Explanation:

Throughout this question, we will be taking the position at which the package is dropped as the origin.

We know that the package lands 100 m from the initial position. We have to investigate the position in the horizontal direction.

To do that, let's first calculate the time of flight of the package.

Here is what we know about the vertical motion taking the downward direction as the positive direction:

the vertical displacement is

s

=

100

m

.

the acceleration is

a

=

g

=

9.81

m

/

s

2

.

the initial velocity of the package is

u

=

0

m

/

s

.

By using an equation that connects the details that we have with the time of flight

t

, we get the time of flight as follows:

s

=

u

t

+

1

2

a

t

2

s

=

0

+

0.5

a

t

2

Make

t

the subject

0.5

a

t

2

=

s

t

2

=

s

0.5

a

t

=

s

0.5

a

=

100

m

0.5

(

9.81

m

/

s

2

)

4.52

s

The horizontal displacement

x

equals the product of the horizontal velocity

v

x

=

40.0

m

/

s

and the time of flight

t

=

4.52

s

, i.e.

x

=

v

x

t

=

40.0

m

/

s

(

4.52

s

)

181

m

The package will strike the ground at

(

181

m

;

100

m

)

.

Part b)

The horizontal component of the velocity is constant throughout the flight and is

v

x

=

40.0

m

/

s

.

For the downward motion, here is what we know:

the vertical displacement is

s

=

100

m

.

the acceleration is

a

=

g

=

9.81

m

/

s

2

.

the initial velocity of the package is

u

=

0

m

/

s

.

By applying an equation that combines the details that we have with the final instantaneous velocity

v

=

v

y

, we get the final instantaneous velocity as follows:

v

2

=

u

2

+

2

a

s

v

=

u

2

+

2

a

s

v

y

=

(

0

m

/

s

)

2

+

2

(

9.8

m

/

s

2

)

(

100

m

)

44.3

m

/

s

The velocity vector at the instant the package just hits the ground is (40.0 m/s ; 44.3 m/s).

Part c)

At the instant that the plane hits the ground, the plane's position is (181 m ; 0 m): i.e. the plane is directly on top of the package and 100 meters above the ground. This is because horizontally, the plane and the package move with the same velocity.

Part d)

The vertical component of the velocity of the package increases at a steady rate. In fact, the rate or gradient is the acceleration

g

=

9.8

m

/

s

2

.

A concave mirror has a focal length of 8em. A real object of height 2em is placed 12cm from the mirror. Calculate the distance of the image from the mirror. If the height of the image formed is 4cm.​

Answers

If the height of the image formed is 4cm, the distance of the image from the mirror is - 24 cm

According to mirror formula,

[tex]\frac{1}{f} = \frac{1}{v} + \frac{1}{u}[/tex]

f = Focal length

v = Image distance

u = Object Image distance

m = Magnification

[tex]h_{o}[/tex] = Object height

[tex]h_{i}[/tex] = Image height

f = - 8 cm

u = - 12 cm

[tex]h_{o}[/tex] = 2 cm

[tex]h_{i}[/tex] = 4 cm

1 / ( - 8 ) = 1 / v - 1 / 12

1 / v = - 1 / 24

v = - 24 cm

The formula used to relate focal length with image and object length is mirror formula. This formula can be used for both plane mirror and spherical mirrors such as concave and convex mirrors.

Therefore, the distance of the image from the mirror is - 24 cm

To know more about mirror formula

https://brainly.com/question/8512677

#SPJ1

URGENT!! ILL GIVE BRAINLIEST! AND 100 POINTS

The diagram shows two girls pushing on a box with equal and opposite forces. Which statement best describes the forces required to move the box to the right?

Answers

Answer: the forces must be unbalanced, with the force from the left greater than the force from the right.

Explanation:

During the experiment, the temperature of the spectrophotometer cavity is measured before inserting the cuvette. what is the main purpose of recording this temperature?

Answers

Dilution is needed to bring the unknown’s absorbance within the range of the standard curve.

If the dilution procedure is documented, it is possible to calculate the full-strength concentration after determining the diluted unknown quantity. Beer’s Law only applies to diluted solutions; hence it is preferable to dilute the unknown than to create new standards.

WHAT PURPOSE DOES A SPECTROPHOTOMETER SERVE?

Spectrophotometers gauge transmittance (T) and absorbance (A) (T). Photons per second are used to quantify the light’s intensity. A blank sample, which does not absorb light when light passes through it, is represented as (I).

What is the spectrophotometer’s fundamental tenet?

The principle of the spectrometer. The spectrophotometer is a device that calculates how much light a substance absorbs.

The spectrophotometer measures the light intensity of a sample by passing a light beam through it.

How does a spectrophotometer function and what is it?

A spectrophotometer is a device that counts the number of photons (light’s energy) absorbed after they have passed through a sample solution.

The spectrophotometer can also be used to determine the concentrations (amounts) of known chemical substances.

To know more about spectrophotometer visit:

https://brainly.com/question/24195565

#SPJ4

An egg is dropped from a treehouse and takes 1.5 seconds to reach the ground. We can ignore air
resistance.
What is the egg's displacement?

Answers

11 m

Explanation:

d = 1/2 a t^2

  = 1/2 (9.81)(1.5)^2 =11 m

Help asap.

How do particles move when a transverse wave passes through a medium?
A. Up to a crest, then down through a trough, then back
B. Through a compression followed by a rarefaction
C. In wavelengths and amplitudes
OD. Along circular or elliptical paths

Answers

Answer:Transverse waves cause the medium to move perpendicular to the direction of the wave.

Explanation:

In a transverse wave, particles of the medium vibrate up and down perpendicular to the direction of the wave. In a longitudinal wave, particles of the medium vibrate back and forth parallel to the direction of the wave.

Other Questions
Which is a perfect square between 49 and 100?Group of answer choices Alexandra Efland has a savings account that earns 5.5% interest compounded daily. On May 5, the amount in the account was $28,214.35. How much interest will the money earn in the next 90 days?Use the formula: where A = AmountP = Principalr = raten = number of periodst = time in yearsGroup of answer choices$38.57$285.71$385.21$901.15 what is a reason if everyone in class does the same experiment with the exact materials and get different results The pay rate and hours worked are given below. Use this information to determine the following. Make sure to include decimals and appropriate zeros.the gross payfederal tax (assuming 20% of gross earnings)state tax (assuming 6% of gross earnings)social security deductions (assuming 7.05% of gross earnings)group health insurance (assuming 13% of gross earnings)pension deduction (assuming 6.5% of gross earnings)total deductionsnet payEarnings Description Rate Hours Current Regular 9.00 39.0 351.00 I need help to find Appropriate pick up lines about vacuoles in biology A company is considering a new product launch. There is a 0.6 chance that demand for the product will be strong and a 0.4 chance that demand will be weak. Two strategies for the launch are possible: 1 has high promotion costs and a net cash outflow of K120 000 if demand proves to be strong, and if demand proves weak a net cash outflow of (K30 000) will result. Strategy 2 has low promotion costs and if demand is strong will generate a cash inflow of only K80 000 but with weak demand a net cash inflow of K20 000.i. Draw a decision tree and advise which course of action generates the greatest expected profit. ii. What is the maximum amount that should be paid for market research to determine with certainty whether demand will be strong or weak? What kind of kitchen equipment is very useful because it offers a lot of workspace on top of what needs to be kept cold and contains a single interior shelf and various slides for prepared foods to be readily accessed?conveyor toastersover-shelvessandwich/salad unitundercounter refrigeration units When finding the intersection of two lines from both Algebra I and Geometry, you first "set the linear equations equal to each other. Find the intersection Doint of the two lines whose equations are shown below. Be sure to find both the x and y coordinates. y=5x+1 and y=2x -11 janet is called for jury duty and is selected for possible service on a jury. however, when the defendant's attorney sees her, he notices that she is wearing a green dress. both the defendant and the defendant's attorney hate green dresses, so they strike her name from the jury. this is: Tell which set or sets the 8 belongs to: natural numbers, whole, numbers, integers, rational numbers, irrational numbers, or realnumbers. First, you need to select significant and relevant facts about the impact new technologies had on the industry in the Gilded Age. que mineral desaparecio de centroamerica? If the per capita growth rate of the world population continues to be what it was in the year 2016, the world population t years after July 1, 2016, will be7.4 1.011t billion.According to this formula, when will the world population reach 8 billion?20192022 20232026 When comparing a plant cell to an animal cell, only the plant cell will have (select all that apply!)1.cell membrane2.cell wall3.nucleus 4.chlorophyll 5.ribosomes Why should a bill of sale for appliances the buyer would like to purchase be made an addendum to the sales contract? What it means to be free essay 400 words can someone help what relationship must hold for the point to be equidistant from the origin and the xz-plane? make sure that the relationship you state is valid for positive and negative values of a, b, and c Im not sure what to pick! Please helpoo Jackson has a points card for a movie theater. He receives 35 rewards points just for signing up. He earns 8.5 points for each visit to the movie theater. He needs 154 points for a free movie ticket. Write and solve an equation which can be used to determine x, the number of visits Jackson must make to earn a free movie ticket. Which angle number represents the linear pair of \angle FHCFHC?