For a particular reaction, the change in enthalpy is â9kJmole and the activation energy is 13kJmole. The enthalpy change (ÎH) and activation energy (Ea) for the catalyzed reaction could be which of the following? a. â9kJmole,5kJmole. b. â9kJmole,19kJmole.c. â14kJmole,5kJmole.d. â14kJmole,â13kJmole.
Answers
Answer:
The answer is Option a, that is "−9kJmole,5kJmole".
Explanation:
Please find the complete question in the attached file.
In the question, it uses the catalyst inside a process, which does not modify the process eigenvalues, however, it decreases the active energy with an enthalpy of -9kJmole, and also the power for activating decreases around 13 to 5 kJ mole, that's why the choice a is correct.
Related Questions
A(n)___ is the smallest neutral unit of two or more atoms held together by a covalent bond?
Answers
Answer:
A(n)___ is the smallest neutral unit of two or more atoms held together by a covalent bond?
=>MOLECULE
What is the mole fraction of each component if 3.9 g of benzene (C6H6) is dissolved in 4.6 g of toluene (C7H8)
Answers
Answer:
Step 1 of 6
(a)
The mass of benzene is  , so calculate the moles of benzene as follows:

The mass of toluene is, so calculate the moles of toluene as follows:

Now, calculate the mole fraction as follows:


Therefore, the mole fraction of benzene and toluene is  and  respectively.
Step 2 of 6
(b)
The formula to calculate the partial pressure is as follows:

Here,  is the partial pressure of benzene,  is the vapour pressure of pure benzene and  is the mole fraction of benzene.
Vapour pressure of pure benzene at  is.
Substitute the values in the equation as follows:

Therefore, the partial pressure is  .
Step 3 of 6
(c)
Vapor pressure of the solution at 1 atm is  .
When the total pressure of the vapour pressure of the mixture is  at a temperature, then, the solution boils. It corresponds to the boiling point of the solution.
Calculate the total pressure of the solution at  as follows:

Since, the total pressure is less than the atmospheric pressure, the solution will not boil at  .
Calculate the total pressure of the solution at  as follows:

Since, the total pressure is greater than the atmospheric pressure, the solution will boil at  .
Therefore, the boiling point of the solution is  .
Step 4 of 6
(d)
Mole fraction of benzene at  is calculated as follows:

Mole fraction of toluene at  is calculated as follows:

Therefore, the mole fractions of benzene and toluene are  and  respectively.
Step 5 of 6
(e)
Vapor pressure of benzene at  is  .
Partial pressure of benzene is calculated as follows:

Vapor pressure of toluene at  is  .
Partial pressure of toluene is calculated as follows:

Step 6 of 6
Weight composition of the vapour that is in equilibrium with the solution is calculated as follows:

Weight composition of the vapour that is in equilibrium with the solution is calculated as follows:

Explanation:
mark me as brainliest
Mole fraction benzene = 0.0499 / 0.0798 = 0.5.
Mole fraction toluene = 0.0499 / 0.0798 = 0.5
a sample of lead had a mass of 150 g. The molar mass of lead is 207.19 g. How many moles of lead does the sample contain?
Answers
Answer:
Explanation:
no of moles=given mass/molar mass
no of moles=150 g/207.19
no of moles=0.72
We will use dimensional analysis to answer this question.
[tex]150 g * \frac{1 g}{207.19 mol} = 0.724 mol[/tex]
The answer is 0.724 mol.
The indicator phenolphthalein is added to the _____________.
a. Analyte
b. Water
c. Solute
d. Titrant
Answers
Answer:
A
Explanation:
I took the test
How would you synthesize 1-hexanol starting from 1-propanol, incorporating a Grignard reagent in the synthesis?
Answers
Answer:
hjhjhjhhhhh
Explanation:
An atom of an element has two electrons in the first energy level and five electrons in the second energy level. Write the electron configuration and name the element. How many unpaired electrons does an atom of this element have?
Answers
Answer:
electronic configuration: 1s^2,2s^2,2p^3
name: nitrogen
unpaired electron: 3
Explanation:
The atom with 2 electrons and 5 electrons in the first and second energy level is NITROGEN. The element has 3 unpaired electron.
The electronic configuration of the atom is 1s² 2s² 2p³Since the atom has 7 Electrons, the element which has 7 electrons is NITROGEN. The 2p orbital has 3 unpaired electrons in it's second energy level.Therefore, the 2p orbital has 3 unpaired electrons in it's outermost shell.
Learn more :https://brainly.com/question/19328396
Are light and other forms of energy are made of atoms
Answers
Answer:
yes they are
Explanation:
Determine the number of Au atoms found in 5.18 grams of gold.
A.1.02x1022 atoms
B. 3.84 x 1022 atoms
C.2.13 x 1022 atoms
D.4.58x1022 atoms
1.58 x 1022. atoms
Please let me know
Answers
Answer:
1.58× 10²² atoms of Au
Explanation:
Given data:
Mass of gold = 5.18 g
Number of atoms of gold = ?
Solution:
First of all we will calculate the number of moles of gold.
Number of moles = mass/molar mass
Number of moles = 5.18 g/196.96 g/mol
Number of moles = 0.0263 mol
Number of atoms:
Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.
The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms of Au
0.0263 mol × 6.022 × 10²³ atoms of Au / 1mol
0.158× 10²³ atoms of Au
1.58× 10²² atoms of Au
Using the equations
2 C₆H₆ (l) + 15 O₂ (g) → 12 CO₂ (g) + 6 H₂O (g)∆H° = -6271 kJ/mol
2 H₂ (g) + O₂ (g) → 2 H₂O (g) ∆H° = -483.6 kJ/mol
C (s) + O₂ (g) → CO₂ (g) ∆H° = -393.5 kJ/mol
Determine the enthalpy (in kJ/mol) for the reaction
6 C (s) + 3 H₂ (g) → C₆H₆ (l).
Answers
The enthalpy : 49.1 kJ/mol
Further explanationThe change in enthalpy in the formation of 1 mole of the elements is called enthalpy of formation
The enthalpy of formation measured in standard conditions (25 ° C, 1 atm) is called the standard enthalpy of formation (ΔHf °)
Based on the principle of Hess's Law, the change in enthalpy of a reaction will be the same even though it is through several stages or ways
Reaction
1. 2C₆H₆ (l) + 15 O₂ (g) → 12 CO₂ (g) + 6 H₂O (g)∆H° = -6271 kJ/mol
Reverse
12 CO₂ (g) + 6 H₂O (g) ⇒ 2C₆H₆ (l) + 15 O₂ (g) ∆H° = 6271 kJ/mol : 2
6CO₂ (g) + 3H₂O (g) ⇒ C₆H₆ (l) + 15/2 O₂ (g) ∆H° = 3135.5 kJ/mol
2. 2 H₂ (g) + O₂ (g) → 2 H₂O (g) ∆H° = -483.6 kJ/mol x 3/2
3H₂ (g) + 3/2O₂ (g) → 3H₂O (g) ∆H° = -725.4 kJ/mol
3. C (s) + O₂ (g) → CO₂ (g) ∆H° = -393.5 kJ/mol x 6
6C (s) + 6O₂ (g) → 6CO₂ (g) ∆H° = -2361 k/j/mol
-------------------------------------------------------------------------------------
6 C (s) + 3 H₂ (g) → C₆H₆ (l) ∆H° = 49.1 kJ/mol
We add up and the same compound that is on different sides we eliminate
What mass of a solution labeled 6.3% sucrose (C12H22O11, 342 g/mol) by mass contains 11.0 g of sucrose?
Answers
Answer:
174.6g of solution contains the 11.0g of sucrose
Explanation:
A solution of 6.3% by mass of sucrose contains 6.3g of sucrose in 100g of solution, that is, 6.3g of sucrose / 100g of solution.
As we want to find the mass contains 11.0g of sucrose, we can write:
11.0g of sucrose * (100g of solution / 6.3g of solution) =
174.6g of solution contains the 11.0g of sucrosePart A Calculate the [H3O+] of the following polyprotic acid solution: 0.300M H3PO4. Express your answer using two significant figures.
Part B Calculate the pH of this solution.
Express your answer using one decimal place.
Part C Calculate the [H3O+] and pH of the following polyprotic acid solution: 0.310M H2C2O4.
Express your answer using two significant figures.
Part D Calculate the pH of this solution.
Express your answer using two decimal places.
Answers
Answer:
A. [H₃O⁺] = 0.900 M
B. pH = 0.0 to one decimal place
C. [H₃O⁺] = 0.620 M
D. pH = 0.21 to two decimal places
Explanation:
A. Equation for the complete dissociation of H₃PO₄ is given below:
H₃PO₄(s) + 3H₂O(l) -----> PO₄³⁻(aq) + 3H₃O⁺(aq)
From the equation of reaction, one mole of H₃PO₄ produces 3 moles of H₃O⁺
Therefore, [H₃O⁺] = 3 * 0.300M = 0.900 M
B. pH = -log[H₃O⁺]
pH = - log(0.900)
pH = -log (9 * 10⁻¹)
pH = 0.0 to one decimal place
C. Equation for the complete dissociation of H₂C₂O₄ is given below:
H₂C₂O₄(s) + 2H₂O(l) ----> C₂O₄⁻(aq) + 2H₃O⁺
From the equation of reaction, one mole of H₂C₂O₄ produces 3 moles of H₃O⁺
Therefore, [H₃O⁺] = 2 * 0.310 M = 0.620 M
D. pH = -log[H₃O⁺]
pH = -log(0.620)
pH = -log(0.62 * 10⁻¹)
pH = 0.21 to two decimal places
The concentration of [[tex]\rm H_3O^+[/tex]] has been 0.9 M, and the pH has been 0.045.
The polyprotic acid has been able to donate more than one proton in an acid-base reaction.
The balanced chemical reaction can be:
[tex]\rm H_3PO_4\;+\;3\;H_2O\;\rightarrow\;PO_4^3^-\;+\;3\;H_3O^+[/tex]
(a) According to the equation, 1 mole of [tex]\rm H_3PO_4[/tex] gives 3 moles of hydronium ions. The molarity has been defined as moles per liter. Assuming the volume of reaction to be 1 liter.
1 mole [tex]\rm H_3PO_4[/tex] = 1 M [tex]\rm H_3PO_4[/tex]
1 mole [tex]\rm H_3PO_4[/tex] = 3 moles [[tex]\rm H_3O^+[/tex]]
0.3 mole [tex]\rm H_3PO_4[/tex] = 3 [tex]\times[/tex] 0.3 moles [[tex]\rm H_3O^+[/tex]].
0.3 mole [tex]\rm H_3PO_4[/tex] = 0.9 moles [[tex]\rm H_3O^+[/tex]]
The concentration of [[tex]\rm H_3O^+[/tex]] has been 0.9 mole/L, or 0.9 M.
(b) pH of the solution can be defined as:
pH = -log [[tex]\rm H_3O^+[/tex]]
pH = -log (0.9)
pH = 0.045
The pH of the solution has been 0.045.
(c) The polyprotic acid have the balanced equation:
[tex]\rm H_2C_2O_4\;+\;2\;H_2O\;\rightarrow\;C_2O_4^-\;+\;2\;H_3O^+[/tex]
According to the equation, 1 M [tex]\rm H_2C_2O_4[/tex] gives 2 M [tex]\rm H_3O^+[/tex].
The concentration of hydronium ions from 0.310 M [tex]\rm H_2C_2O_4[/tex] has been:
1 M [tex]\rm H_2C_2O_4[/tex] = 3 M [tex]\rm H_3O^+[/tex]
0.310 M [tex]\rm H_2C_2O_4[/tex] = 2 [tex]\times[/tex] 0.310 moles [[tex]\rm H_3O^+[/tex]]
0.310 M [tex]\rm H_2C_2O_4[/tex] = 0.62 M [[tex]\rm H_3O^+[/tex]].
The [[tex]\rm H_3O^+[/tex]] concentration of the solution has been 0.62 M.
(d) pH of the solution can be defined as:
pH = -log [[tex]\rm H_3O^+[/tex]]
pH = -log (0.62)
pH = 0.20
The pH of the solution has been 0.20.
For more information about the pH of the solution, refer to the link:
https://brainly.com/question/1265333
In the third century B.C., King Hieron of Syracuse asked the famous mathematician Archimedes to determine if his crown was made of pure gold. This was a puzzling problem for Archimedes-he knew how to measure the weight of the crown, but how could he measure the volume? Archimedes solved the problem when he got into his bath and noticed the water spilling over the sides of the tub. He realized that the volume of the displaced water must be equal to the volume of the object placed into the water. Archimedes was so excited by. his discovery that he jumped out of the bath and ran through the streets shouting "Eureka!" a. How can you tell if a crown is made of solid gold? b. Gold is one of the densest substances known, with a density of 19.3 g/mL. If the gold in the crown was mixed with a less-valuable metal like bronze or copper, how would that affect its density? c. What is the relationship between the object density, the liquid density, and the tendency of the object to float? d. From the experimental results obtained by you in the lab of the density of the liquid and the object, could the object float in that liquid? Explain.
Answers
Answer:
See explanation
Explanation:
a. I can conclusively tell if the crown was made of gold by measuring its density. First the mass of the crown is measured on a weighing balance. The crown is now put into a given volume of water and the volume of water displaced is accurately measured. The density of the crown is computed as mass/volume of fluid displaced. If the density of the crown is 19.3 g/mL, then it is made of solid gold.
b) When less valuable metals such as bronze or copper is mixed with gold in the crown, the density of the crown decreases and the crown becomes more brittle.
c) An object will float in a liquid when the density of the object is less than the density of the liquid. Hence the tendency of an object to float in a liquid depends on the density of the object and the density of the liquid.
d) Even though i do not know the results from your experiment but as regards the decision as to whether the object will float in the given liquid or not, reference must be made to the measured density of the object as well as the given density of the liquid. If the object is less dense (from values of density obtained from the experiment) than the liquid, then the object will float in the liquid and vice versa.
How many valence electrons are found in P3- ?
Answers
Answer:
5 valence elctrons
Explanation:
the outer most orbitals, 3s2 and 3p3 contains 5 electrons, thus valences electrons for P is 5
Calculate the following quantity: volume of 1.58 M calcium chloride that must be diluted with water
to prepare 994 mL of a 6.20 x 10^-2 M chloride ion solution.
Answers
What is the change in the internal energy of a system that does 100 joules of
work and absorbs 1,000 joules of heat?
Answers
Answer:900j
Explanation:
Roughly how many water molecules are ionized at any given time in a sample of room-temperature water? a. one in a thousand b. one in a million c. one in a billion d. one in a trillion
Answers
Answer:
one in a billion
Explanation:
We have it known that Pure water is entirely made up of H2O molecules. Just 1 in 10⁹, that is a billion molecules are ionized when it is at room temperature.
The Ionization of water has this chemical equation:
H2O <--> H+ + OH-
When At equilibrium and at room temperature, we have the rate of forward reaction and the backward reaction to be very fast such that no water molecule would eventually remain ionized.
Therefore our answer is roughly one in a billion water.
Which element is most likely suspected?
iron
Sulfur
Chromium
Nickel
Answers
Answer: sulfur
Explanation:
Answer:
its sulfur babes
Explanation:
The sun shines more directly near the equator, bringing more warmth there. In polar regions the sun shines at angles such that
they get little or no sunlight during the winter, causing colder temperatures. Predict how these differences in temperature create a
movement in the atmospheric gases and distribute heat energy from the sun across the planet.
A)
B)
As air in one region diffuses, it becomes less condensed than the
surrounding air and begins to rise and draws more air along.
As air in one region warms, it becomes less dense than the surrounding air
and begins to rise and draws more air in underneath.
As air in one region warms, it becomes less nebulous than the surrounding
air and begins to descend and draws more air in with it.
As air in one region cools, it becomes less compact than the surrounding
air and begins to accelerate and draws more air in supportively.
C)
D)
Answers
Answer:Because the Earth is round and not flat, the Sun's rays don't fall evenly on the land and oceans. The Sun shines more directly near the equator bringing these areas more warmth. However, the polar regions are at such an angle to the Sun that they get little or no sunlight during the winter, causing colder temperatures.
Explanation:
Please help I will give brainiest
Answers
Answer:
Answer
Answer is option B coz da negative charge r more thn positive
Answer:
B.
Explanation:
On the hand in the option B there are 3 positive and 5 negative signs so the answer is B.
Other than the starting material, 2-methylcyclohexanol, what base or bases are present in the dehydration reaction mixture to participate in proton transfers?
a) H2PO4- only
b) H2O and H2PO4-
c) H2O and HSO4-
d) H2O only
Answers
Answer:
c) H2O and HSO4-
Explanation:
The dehydration of 2-methylcyclohexanol occurs in the presence of H2SO4. Recall that acids are proton donors in solution; the equilibrium shown below is then set up,
H2SO4(aq) + H2O(l) ⇄H3O^+(aq) + HSO4^-(aq)
The species H2O and HSO4- are two proton acceptors in the system. According to the Brownstead- Lowry definition, a base is a proton acceptor in solution.
Hence H2O and HSO4- are bases present in the dehydration of 2-methylcyclohexanol.
Look at the picture below. Name the isotope
Calcium-19
Calcium-39
Potassium-20
Potassium-39
Answers
What is the energy of a wave if the frequency is 300. Hz
Answers
Answer:
[tex]E=1.98\times 10^{-31}\ J[/tex]
Explanation:
Given that,
The frequency of a wave, f = 300 Hz
We need to find the energy of a wave. The formula for the energy of a wave is given by :
E = hf,
Where h is Planck's constant
[tex]E=6.63\times 10^{-34}\times 300\\\\=1.98\times 10^{-31}\ J[/tex]
So, the energy of the wave is [tex]1.98\times 10^{-31}\ J[/tex].
Which unit of measurement would best be used to measure the volume of a points a DROP of water? .
Answers
Answer:
milliliter
Explanation:
smallest form of measuring volume from all the available choices
chlorine monobromide ionic or molecular
Answers
A 1.038 g sample of unknown containing C, H, and O yielded 2.48 g of CO2 and 0.510 g of H2O during combustion analysis. Determine the empirical formula of the compound.
A) C3H3O
B) C6H6O
C) CH3O
D) C6H6O2
E) C2H6O2
Answers
Answer:
A. C3H3O
Explanation:
We have the following data:
m = mass of organic compound = 1.038g
Then mass of CO2 is 2.48g
Also mass of H2O is 0.510g
To calculate percentage of carbon = 12 x mass of CO2 x 100/44 x mass of organic compound
This gives us 65.1 percent
Formula to calculate percentage of H=
2 x mass of water x 100/18 x mass of organic compound.
= 2 x 0.510 x 100/18x 10038
This gives 5.4%
Percentage of Oxygen =100-(percentageof carbon +percentageof H)
= 100-(65.1+5.4)
= 100-70.5
= 29.5
We have to calculate emperical formula:
For C = 65.1
65.1/12
= 5.4
= 5.4/1.8
=3
For H=5.4
5.4/1
= 5.4
= 5.4/1.8
=3
For O = 29.5
= 29.5/16
= 1.8
= 1.8/1.8
=1
So the emperical formula of organic compound is given as
C3H3O1
= C3H3O
(The atomic weights of C, H, O are 12,1,16)
Which of these compounds do not have a pH dependent solubility at less than pH 7.00?
Answers
Answer:
tbh idekkk
Explanation:
Why can’t you ice skate on a lake when it is not frozen?
Answers
Washing machines use a large amount of water. A student suggested that old pairs of stained jeans which have to be washed more frequently should be replaced by new pairs of jeans to conserve water. Which of these statements best describes the suggestion made by the student? Question 9 options: It is not practical because an old pair of jeans needs less water to be washed than a new pair of jeans. It is practical because a huge amount of water can be conserved by this method. It is practical because it is easy to implement. It is not practical because it takes a huge amount of water to produce a new pair of jeans.
Answers
Answer:
C |||| It is not practical because it takes a huge amount of water to produce a new pair of jeans
Explanation:
If you're doing flvs then it's C.
Answer:
C!
Explanation:
i got it right on the test UwU
How something works is related to its structure
Answers
Step by step explanation:
Not sure if this is what you wanted.
Answer:
Forms and Functions
Explanation:
It refers to the direct relationship between the structure of a thing and the way it functions.
Blood takes about 1.55 s to pass through a 2.00 mm long capillary. If the diameter of the capillary is 5.00 μm and the pressure drop is 2.45 kPa, calculate the viscosity ???? of blood. Assume laminar flow.
Answers
Answer:
The viscosity [tex]\mathbf{\eta = 7.416 \times 10^{-4} \ N.s/m^2}[/tex]
Explanation:
From the given information:
Time t = 1.55 s
The radius of capillary = 5.00 μm /2
The pressure drop ΔP = 2.45 kPa
The length of the capillary = 2.00 mm
∴
The viscosity of the blood flow can be calculated by using the formula:
[tex]\eta = \dfrac{r^2 \Delta P }{8Lv}[/tex]
where;
v = L/t
Then;
[tex]\eta = \dfrac{r^2 \Delta P }{8L(\dfrac{L}{t})}[/tex]
[tex]\eta = \dfrac{(\dfrac{5 \times 10^{-6} \ m}{2})^2(2.45 \times 10^3 \ Pa) }{8(2.0 \times 10^{-3} \ m ) (\dfrac{2.0 \times 10^{-3} \ m }{1.55 \ s })}[/tex]
[tex]\eta = 7.416 \times 10^{-4} \ Pa.s[/tex]
To (N.s/m²)
[tex]\mathbf{\eta = 7.416 \times 10^{-4} \ N.s/m^2}[/tex]