For most of history, the lack of observable stellar parallax was interpreted to mean that.

Total magnetic field at the point P midway between the wires is Zero.

The higher wire's contribution to the magnetic field at point P is directed into the page, whereas the lower wire's contribution is directed out of the page. These two oppositely directed contributions to the magnetic field have identical magnitudes and cancel each other out since point P is equally spaced from the two wires and the currents flowing through them are of equal magnitude.

The term "magnitude" refers to an object's greatest size and direction. Scalar and vector quantities both use magnitude as a common factor. We are aware that scalar quantities are those that have just magnitude by definition. Those quantities with both magnitude and direction are considered vector quantities. It can also be used to describe how far an object has travelled or how much an object weighs in terms of its magnitude.

To learn more about magnitude, visit:

https://brainly.com/question/14033610

#SPJ4

Sun exploded 16 years after Tau Ceti.

Considering a scenario in which the Sun is going to explode.

In order to escape the explosion, we depart in a spacecraft with a speed of v = 0.8c.

The star Tau Ceti is 12 life years away.

At the midpoint of the journey, the Sun as well as Tau Ceti explode. at the same instant.

Now, the distance between the Sun and the spacecraft:

L = L(p) √( 1 - (v/c)²)

L = (6 ly) √[1 - (0.8)²] = 3.6 ly

Now, we observe Sun to be flying away from us at a speed of 0.8c whereas the light from the Sun approaches at a speed 1c.  Therefore, the gap between the Sun and the blast of the Sun wave is opened at a speed of 1.8c.

Therefore, the time passed ever since the Sun exploded is:

t = 3.60 ly / 1.80c = 2 years.

Now, we observe Tau Ceti moving toward us at a speed of 0.8c, whereas the light from the blast approaches at a speed of 1c which is only 0.2c faster. Then the gap between the Tau Ceti and its blast wave is 3.60 ly and growing at a speed of 0.2c.

Therefore, the time for which it has been opening is:

t = 3.60 ly/ 0.20c

t = 18 years.

Therefore, Tau Ceti exploded 16 years before the Sun.

Learn more about Sun here:

https://brainly.com/question/15837114

#SPJ4

A bulb that consumes 25 A of current is separated from a dc power source by a span of 250 feet. Calculate the amount of power lost in the cable if 14 AWG wire is used (keep in mind that two wires are required for a total length of 500 ft).

The answer is 34%, according to the Energy Information Administration (EIA). In other words, by the time the power reaches the consumer metre, 66% of the raw energy needed to generate it has been lost.

The biggest televisions in particular might be the most energy-hungry of all entertainment devices, according to Brian Horne, Senior Insights & Analytics Consultant, Energy Saving Trust. Regardless of its energy rating, a television will use more energy the bigger it is.

Learn more about power refer

https://brainly.com/question/1634438

#SPJ4

The force on the wire will be

F = 3.16 Newton

We have a current carrying wire in a uniform magnetic field.

We have to determine the magnitude of the magnetic force on the wire assuming the angle between the magnetic field and the current is 60.0°.

The force on the current carrying wire will be -

F = IBL sinθ

According to the question, we have -

L = 2.80 m

I = 5 A

B = 0.39 T

Therefore -

F = IBL sinθ

F = 5 x 0.39 x 2.80 x sin(120)

F = 5.46 x sin(120)

F = 5.46 x 0.58

F = 3.16 Newton

Hence, the force on the wire will be

F = 3.16 Newton

To solve more questions on Magnetic field intensity, visit the link below-

brainly.com/question/13103888

#SPJ4

The magnitude of the magnetic force on the wire 4.728 N.

To find the magnetic force, the values given are:

Length A = 2.80m

Current I = 5 A

Magnetic field B = 0.390 T

Angle = 120° .

What is meant by magnetic force?

                      F =iBLsinθ Newton

Substituting the values given,

Magnetic force,

F = 5 A × 0.390 T × 2.80 m × Sin 120°

  = 5 A × 0.390 T × 2.80 m × 0.8660254

F = 4.728 N.

The magnitude of the magnetic force on the wire 4.728 N.

Learn more about Magnetic force,

https://brainly.com/question/28446452

#SPJ4

The magnitude of their relation compares by the given relation E_A= E_B  > 0 (c) when two solid spheres, both of radius 5cm, carry identical total charges of 2 μC, given that Sphere A is a good conductor. Sphere B is an insulator, and its charge is distributed uniformly throughout its volume

Both spheres produce identical fields at the outer locations, much like particles do at the cores, due to the spherically symmetric charge distributions. However, the magnitude of the electric field in charge A is equal to the magnitude of the electric field in charge B greater than zero.

To learn more about charges in a sphere. Click, https://brainly.com/question/14527109.

#SPJ4

Then step off and then throw to the base where the infraction occurred. There is no need to tell an umpire what you are appealing the players have a greater change of hitting a home run.

In baseball, a home run (abbreviated HR) is scored when the batter is able to safely round the bases and get to home plate in one play without any errors from the opposing team's defense. Typically, a home run is obtained by launching the ball over the outfield fence in between the foul poles (or by striking either foul pole) without allowing it to touch the field. A much less frequent type of home run is one that occurs "within the park," in which the batter makes it safely home while the ball is still in play on the field.

A hit, a run scored, and a run batted in (RBI) are all given to the batter when a home run is hit.

To learn more about home run from the given link:

https://brainly.com/question/13071738

#SPJ4

The average speed of the car that travels 10km for 3h, then travels 15km for another 6h, finally travels 3km for 5h is 2km/hr.

The average speed of a moving object can be calculated by dividing the distance moved by the substance by the time taken.

Average speed = Distance/time

According to this question, a car travels 10km for 3h, then travels 15km for another 6h, finally travels 3km for 5h.

Average speed = 28km ÷ 14h = 2km/hr

Therefore, the average speed of the car that travels 10km for 3h, then travels 15km for another 6h, finally travels 3km for 5h is 2km/hr.

Learn more about average speed at: https://brainly.com/question/12322912

#SPJ1

Answer:

Ο Α. 300.0 Ω

Explanation:

The equivalent resistance of a circuit that contains four 75.0 Ω  in series combination 300Ω

When two or more resistors are connected between two same points, they are said to be connected in parallel combination(as shown in fig). The equivalent resistance is the reciprocal and the sum of reciprocals of all resistance connected in parallel combination.

1/Rs = 1/R₁ + 1/R₂ + 1/R₃...........+ 1/R(n).

where Rs is the equivalent or total resistance of the circuit.

In parallel combination, same potential difference exists across each resistor. But current through each resistance is different.

When two or more resistors are connected one after other, they are said to be connected in series as shown in figure. in this combination voltage difference across each resistance is different which is given by ohms law. current flowing through each resistance is same.

equivalent resistance for series combination is given by,

R(s) = R₁ + R₂ + R₃...........+R(n).

Given,

R₁ + R₂ = R₃ = R₄ = 75Ω

For series combination,

R(s) = R₁ + R₂ + R₃+R₄

R(s) = 75+75+75+75

R(s) = 300 Ω

Hence option A is correct.

To know more about resistance :

https://brainly.com/question/30799966

#SPJ5.

The statements which are true about Newton's Third Law force pairs include the following:

Newton's Third Law of Motion states that for every action there is an equal but opposite reaction. This ultimately implies that, in every interaction, there is a pair of forces (force pairs) acting on the two interacting objects.

In Science, force pairs are also referred to as action-reaction pairs, which are forces acting on different object and have the same (equal) magnitude but opposite in direction.

A free body diagram can be defined as a graphical illustration which is typically used to visualize moments, tension, and applied forces that are acting on an isolated or rigid body (object), while using arrows pointing in the direction of these forces.

Read more on Newton's Third Law of Motion here: brainly.com/question/25998091

#SPJ1

Complete Question:

Which of the following statements are true about Newton's 3rd law force pairs? There may be more than one correct answer.

The Michelson-Morley test set out to test whether or not or not the ether becomes an absolute reference body by measuring the velocity of light with admire to the shifting Earth. It became hypothesized that the rate of light ought to alternate with a change within the Earth's velocity across the solar.

The outcomes of the Michelson-Morley experiment found no interference styles which means that the velocity of light is equal in a vacuum. This brought about the realization that mild does now not require any medium to travel. The results of the Michelson-Morley experiment supported Einstein's principle of unique relativity.

It turned into hypothesized that the rate of mild ought to trade with a change in the Earth's pace around the sun. however, no such exchange in velocity of light turned into observed and this became called the null result. Michelson and Morley were capable of degree the velocity of light by means of seeking out interference fringes among the mild which had surpassed via the 2 perpendicular palms of their equipment.

Learn more about the Michelson-Morley experiment here:-https://brainly.com/question/15858195

#SPJ1

The average speed of the plane is 816 m/s.

We need to know about the average speed to solve this problem. The average speed can be determined as the total distance divided by the total time. It can be written as

v = d / t

where v is average speed, d is distance and t is time.

From the question above, we know that

d1 = d2 = 430 km

v1 = 680 m/s

v2 = 1020 m/s

Because of the distance is the same, we can calculate the average speed as

v = 2d / (t1 + t2)

v = 2.d / (d/v1 + d/v2)

v = 2/(1/v1 + 1/v2)

v = 2/(1/680 + 1/1020)

v = 816 m/s

For more on average speed at: https://brainly.com/question/24739297

#SPJ4

The initial speed of the proton that is projected in the positive x direction into a region of a uniform electric field is 2.84×〖10〗^6 m/s

The equation of motions expresses the speed of an object with initial velocity u, final velocity v, and distance s, as;

v^2= u^2+2 a.s

Making u the subject of the formula,

u^2= -2 a.s

Given that:

a=5.76×〖10〗^13 m/s^2

s =7.00cm or 0.07m

Inserting values,

u^2= -2 ×(-5.76×〖10〗^13  m/s^2)×0.07m

u^2=8.06×〖10〗^12 m^2/s^2

Therefore,

u= √8.06×〖10〗^12 m^2/s^2

u=2.84×〖10〗^6  m/s

Therefore, the initial speed  of the proton is  2.84×〖10〗^6  m/s

https://brainly.com/question/14892278

#SPJ4

Answer: I would say that the answer to your question is "Nature"

Explanation: Everything that you've listed is related to nature.

a) 6000 Pa

b) 400 Pa

The watt (abbreviated W) is the International System of Units' (SI) standard unit of power (energy per unit time), the equivalent of one joule per second. The watt is used to specify the rate at which electrical energy is dissipated, or the rate at which electromagnetic energy is radiated, absorbed, or dissipated.

One pascal can be defined as the pressure exerted on a surface of area 1m2 by a force of 1N that acts normally on it.

in statement six thousand watt

six thousand in figure will be = 6000

since , its unit is in watt it can be written as = 6000 W

in statement four hundred pascals

four hundred in figures will be = 400

having unit pascal = Pa

which can be written as = 400 Pa

To learn more about Pressure here

https://brainly.com/question/356585

#SPJ1

The calculated acceleration is for plane and in 19 s 2.63 m/s2 and 475.25 m respectively.

An object's velocity can alter depending on whether it moves faster or slower or in a different direction. A few instances of acceleration include an apple falling, the moon orbiting the earth, or a car being halted at a set of traffic lights.

We employ the following equation to resolve the first portion of this problem.

Vf = 50 m/s final speed

Initial speed: 0 V

t=time

a=acceleration

a=(Vf-Vo)/t

a= (50-0)/19=2.63m/s^2

The following equation is used for this problem's second component.

X=(Vf^2-Vo^2)/2a

X= (50^2-0^2)/ (2*2.63)

=475.25m

The complete question is- A small turbo prop commuter airplane, starting from rest on a New York airport runway, accelerated for 19.0s before taking off. It's speed at takeoff is 50.0 m/s. Calculate the acceleration of the plane, assuming it remains constant. Part B) In this problem, how far did the plane move while accelerating for 19.0s?

Learn more about acceleration here-

https://brainly.com/question/12550364

#SPJ4

The Peak power output of the motor is 0.452 Watt

To find the peak power output, the given values are,

No .of turns of the wire = 80

Dimensions is given as, 2.50 cm by 4.00 cm

Magnetic field = 0.800 T.

current = 10 mA.

Angular speed = 3.60 ×10³ rev/min

The formula for peak power output,

                     Pout = τ * ω

where,

Pout - output power  watts (W),

τ - torque   Newton meters (Nm),

ω - angular speed  radians per second (rad/s).

Calculating angular speed as here rotational speed of the motor in rpm is given:

                      ω = rpm * 2π / 60

where,

ω – angular speed, radians per second (rad/s),

rpm – rotational speed in revolutions per minute,

π – mathematical constant pi (3.14),

60 – number of seconds in a minute.

So, the formula is,

Peak power output = τ *rpm * 2π / 60

τ = NIAB sinθ Nm

  = 80×10×10⁻³×0.0250×0.040×0.800× Sin 90°

  = 2 × 6.4 × 10 ⁻⁴

  = 1.2 × 10⁻⁴ Nm.

Peak power output = 1.2 × 10⁻⁴ ×3.60×10³ × 2π / 60

= 0.452 Watt

Thus, the peak power output is 0.452 Watt.

Learn more about Peak power output,

https://brainly.com/question/13937812

#SPJ4

Small angle approximation is used. Thus, the magnetic dipole displaced from the equilibrium acts as a torsional pendulum only for a small angle.

The angle (measured in radians, degrees, or revolutions) through which a point spins around a particular axis or center is known as the angular displacement of a body. Because a body rotates about its axis, its motion cannot simply be analyzed as a particle because it constantly changes its speed and acceleration (t). It is less complicated to think of a body as rigid while dealing with its rotation. When all of the particle separations remain constant during a body's motion—for instance, when its mass is not flying off—the body is said to be rigid. Realistically, everything is susceptible to deformation, but the effects are little and insignificant.

To learn more about angular displacement, visit:

https://brainly.com/question/24158647

#SPJ4

The magnitude of the current in wire 3  is 2.4 A and in a direction pointing in the downward direction.

From the image, force on wire 2 due to wire 1 = force on wire 2 due to wire 3

[tex]F_2_1=F_2_3[/tex]

Using equation (1) , we get

[tex]\frac{u_0I_2I_1}{0.2} =\frac{u_0I_2I_3}{0.32} \\\\\frac{I_1}{0.2} =\frac{I_3}{0.32} \\\\\frac{1.50}{0.2} =\frac{I_3}{0.32} \\\\0.48=0.2I_3\\\\I_3=2.4A[/tex]

I₃ = 2.4 A and the current is pointing in the downward direction

Learn more about the magnitude and direction of forces here:

brainly.com/question/14879801?referrer=searchResults

#SPJ4

The complete question is given below :

A schematic of the information provided in the question can be seen in the image attached below.Two long wires hang vertically. Wire 1 carries an upward current of 1.50 A . Wire 2,20.0cm to the right of wire 1, carries a downward current of 4.00 A . A third wire, wire 3 , is to be hung vertically and located such that when it carries a certain current, each wire experiences no net force. (c) the magnitude and direction of the current in wire 3 .

Vania is correct in her saying that 25 meters per second is speed as in 25 meter per seconds nothing represents the direction in which the speed is pointing.

Speed is a physical quantity that represents the change in distance per unit time it is a scalar quantity and its SI unit is meter per second. Speed only has magnitude but does not have direction.

Velocity is a physical quantity that represents the change in displacement per unit time it is electric quantity and its SI unit is meter per second. Velocity has both magnitude and direction.

Given:

The physical quantity is 25 meters per second.

According to the question Shakib points out that 25 meters per second is velocity, but Shakib is wrong in saying so as in 25 meters per second nothing represents the direction of this quantity.

Here from the given data we can only know the magnitude of the physical quantity but not wear it is pointing towards to.

On the other hand one ya says that 25 m per second is a physical quantity that represents speed and her reasoning is that 25 m per second gives the magnitude as well as the SI units of speed and do not point out in a particular direction therefore the quantity must be speed.

Hence, Vania is correct in her saying that 25 meters per second is speed as in 25 meter per seconds nothing represents the direction in which the speed is pointing.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ9

Dimensions of a steel block that is uniformly rectangular are 1. 00 cm, 2. 00 cm, and 3. 00 cm. It starts to slide at the shallowest angle whenever the block's face comes into contact with the board.

An angle is formed when the two straight lines or rays meet at a common endpoint. The common point of the contact is called the vertex of an angle. The word angle comes from Latin word named ‘angulus,’ meaning “corner.”

In general, an angle is a figure created in Euclidean geometry by two rays that have a common terminus and are referred to as the vertices and sides of the angle, respectively.

The angles produced by the beams are always contained in the plane that comprises two rays.

In conclusion, the block will start to slide at the angle that offers the least resistance once its face makes contact with the board.

To know more about angle visit: https://brainly.com/question/28451077

#SPJ4

If a toy rocket is launched vertically and rises to a height of 250 meters, then the initial velocity of the toy rocket would be 70 m / s.

There are three equations of motion given by Newton,

v = u + at

S = ut + 1/2×a×t²

v² - u² = 2×a×s

As given in the problem, a toy rocket is launched vertically and rises to a height of 250 meters, we have to find the initial velocity of the launch,

By using the third equation of motion given by Newton,

v² - u² = 2×a×s

0² - u² = 2×(-9.81)×250

u² = 4905

u = 70 m / s

Thus, the initial velocity of the toy rocket would be 70 m / s.

To learn more about equations of motion from here, refer to the link;

brainly.com/question/5955789

#SPJ1

By using vector, the total displacement is 36 km.

We need to know about vectors to solve this problem. Vector has magnitude and also direction. Displacement is included in vector. It can be written as

s = sx i + sy j + sz k

where s is displacement, sx is displacement on x-axis, sy is displacement on y-axis and sz us displacement on z-axis.

From the question above, we know that

east = positive x

west = negative x

s1 = 92i km

s2 = -56i km

Hence, the total displacement is

s = s1 + s2

s = 92i - 56i

s = 36i

Find the magnitude

|s| = √sx²

|s| = √36²

|s| = 36 km

Find more on vector at: https://brainly.com/question/25811261

#SPJ4

The pitch of the helical path of positron is, [tex]p=1.038 \times 10^{-4}[/tex]

The radius of a circular arc that most closely resembles the curve at a given point on a projectile's trajectory is the radius of the trajectory, which reveals the direction in which the projectile is curving at that particular location.

Given:

Magnitude of magnetic field, [tex]B=0.150\;T[/tex]

Speed of position, [tex]v=5 \times 10^{6}\;m/s[/tex]

Angle, [tex]\;\theta=85^{\circ}[/tex]

The motion of the particle is expected to be a helix.

(a)

We know that,

[tex]Pitch,\;p=V_{11} \times T[/tex]

Where,

[tex]V_{11}=parallel\;velocity\;to\;magnetic\;field[/tex]

[tex]T=Time\;period=\frac{2 \times \pi \times m}{q \times B}[/tex]

[tex]Mass\;of\;positron,\;m=9.1 \times 10^{-31}\;kg\\[/tex]

[tex]Change\;of\;positron,\;q=+1e=1.6 \times 10^{-19}\;kg[/tex]

Substitute the known values in pitch equation,

[tex]p=Vcos\theta\frac{2\times \pi \times m}{q\times B}[/tex]

[tex]p=(5\times 10^{6)} cos85^{\circ}\;\frac{2\times \pi \times 9.1 \times 10^{-31} }{1.6 \times 10^{-19} \times 0.150}[/tex]

By solving the above equation, we get

[tex]p=1.038 \times 10^{-4}[/tex]

Therefore,

[tex]p=1.038 \times 10^{-4}[/tex]

(b)

We know that,

[tex]Radius\;of\;trajectory,\;r=\frac{m \times V_{1} }{q \times B}[/tex]

Where,

[tex]V_{1}=perpendicular\;velocity\;to\;magnetic\;field[/tex]

[tex]m=mass\;of\;positron=9.1 \times 10^{-31} \;kg[/tex]

[tex]q=charge\;of\;positron=+1e=1.6 \times 10^{-19}\;kg[/tex]

Substitute the known values in the radius of trajectory equation,

[tex]Radius\;of\;trajectory,\;r=\frac{m}{q \times B}\;(Vsin\theta)[/tex]

[tex]Radius\;of\;trajectory,\;r=\frac{9.1 \times 10^{-31} \times 5 \times 10^{6} \times sin85^{\circ}}{1.6 \times 10^{-19} \times 0.150}[/tex]

By solving the above equation, We get,

[tex]r=1.88 \times 10^{-4} \;m[/tex]

Therefore, The radius of the trajectory is,

[tex]r=1.88 \times 10^{-4} \;m[/tex]

To learn more about trajectory's radius, visit:

https://brainly.com/question/14377973

#SPJ4

The acceleration of the motorboat is proportional to the speed.

The speed of the motorboat when it cuts its engine =

10 m/s

The motion of a motorboat is v.

[tex]v = v _{i} \: e ^{ - ct}[/tex]

[tex]10= v _{i} \: e ^{ - ct} = (v _{1})(1)[/tex]

[tex] v _{i} = 10 \:m /s[/tex]

At t = 20. seconds.

v = 5 m/s

[tex]5= 10 \: e ^{ - c(20 \: s)}[/tex]

[tex] e ^{ - c(20 \: s)} = 0.500[/tex]

At t = 40 seconds.

[tex]v = 10 \: e ^{ - 40 \: c}[/tex]

[tex] = \frac{10}{0.250} [/tex]

= 2.50 m/s

Acceleration of the motor boat is,

[tex]a = \frac{dv}{dt} [/tex]

[tex] = \frac{d}{dt} \: v = v _{i} \: e ^{ - ct}[/tex]

[tex] = v _{i} \: e ^{ - ct}(-c)[/tex]

[tex]= -c(v _{i} \: e ^{ - ct})[/tex]

a = -cv

The acceleration of the motorboat is negative constant into speed.

Therefore, the acceleration of the motorboat is proportional to the speed.

To know more about acceleration, refer to the below link:

https://brainly.com/question/980919

#SPJ4

Answer:

6 kilometers per hour

Explanation:

Distance = 15km

Time= 2 hours 30 minutes

Speed = Distance / Time

Speed = 15 / 2.5

Speed = 6 km per hour.

The buoyant force on the ball in the pool of mercury is greater.

An object is subject to the buoyant force of the liquid ( fully or partially submerged in a liquid ). An object won't sink in a liquid if its buoyant force (pointing upward) exceeds its weight (pointing downward) on the object. A fluid's buoyancy, also known as its upthrust, is the upward force it exerts in opposition to the weight of an object that is partially or completely submerged. The weight of the fluid on top causes pressure in a fluid column to rise with depth. As a result, the pressure at the bottom of a fluid column is higher than at the top.

To learn more about Buoyancy, Visit:

https://brainly.com/question/17009786

#SPJ4

By analyzing the vector, the clothesline tension is 25 N.

We need to know about vectors to solve this problem. Force is included in vectors that have magnitude and direction. It can be written as

F = (Fx i + Fy j) N

where F is the force vector, Fx is the x-axis component and Fy is the y-axis component.

From the question we know that :

x = 10 m

(midpoint = 5m)

y = 1 m

m = 1 kg

Find the weight

W = m . g

W = 1 x 10

W = 10N

There are two y-axis components of the tension that hold the clothes. Because of static conditions, we can write

∑Fy = 0

Ty + Ty - W = 0

2Ty - 10 = 0

2Tsinθ - 10 = 0

Find sinθ

sinθ = y/x

sinθ = 1/5

Substitute the sinθ

2Tsinθ - 10 = 0

2T(1/5) - 10 = 0

2T/5 = 10

T = 25 N

Hence, the clothesline tension is 25 N.

For more about vectors at: https://brainly.com/question/25811261

#SPJ4

A bigger star has a bigger surface.The ability to emit more light and energy is made possible by the greater surface area.The luminosity of a star is also influenced by temperature.

The radius of star B is nearly 800 times greater than that of star A.

When two stars with a 3000K surface temperature are present.

The star A is about 5% brighter than the star B, which is about 32,000 imes brighter.In light of the fact that brightness is a property of both stars and suns, star B will have a radius that is 800 times greater than star A's.

To learn more about Luminosity of the star , visit :

https://brainly.com/question/15099713

#SPJ4

Answer:

1.65 m = 165 cm = 1650 mm

Explanation:

Hope this helps :)

Answer:

1.65 m = 165cm

1.65 m = 1,650mm

Explanation:

1.65 m = 165cm

    for converting m to cm ▶ meters×100 ▶ 1.65×100=165cm

1.65 m = 1,650mm

    for converting m to mm ▶ meters×1,000 ▶ 1.65×1,000=1,650mm

Hope it helps!!!

;}