For what values of r does the function y Se satisfy the differential equation - 730y0? The smaller one is The larger one (possibly the same) is

Answers

Answer 1

The function y(r) satisfies the differential equation -730y'(r) = 0 for all values of r.

The given differential equation is -730y'(r) = 0, where y'(r) represents the derivative of y with respect to r. To find the values of r for which the equation is satisfied, we need to solve it.

The equation -730y'(r) = 0 can be rewritten as y'(r) = 0. This equation states that the derivative of y with respect to r is zero. In other words, y is a constant function with respect to r.

For any constant function, the value of y does not change as r varies. Therefore, the equation y'(r) = 0 is satisfied for all values of r. It means that the function y(r) satisfies the given differential equation -730y'(r) = 0 for all values of r.

In conclusion, there is no specific range of values for r for which the differential equation is satisfied. The function y(r) can be any constant function, and it will satisfy the equation for all values of r.

Learn more about differential equation :

https://brainly.com/question/25731911

#SPJ11


Related Questions

a 6 foot tall man walks toward a street light that is 16 feet above the ground at the rate of 5 ft/s. at what rate is the tip of the shadow moving?

Answers

The tip of the shadow is moving at a rate of approximately 1.36 ft/s.

Definition of the rate?

In general terms, rate refers to the measurement of how one quantity changes in relation to another quantity. It quantifies the amount of change per unit of time, distance, volume, or any other relevant unit.

Rate can be expressed as a ratio or a fraction, indicating the relationship between two different quantities. It is often denoted using units, such as miles per hour (mph), meters per second (m/s), gallons per minute (gpm), or dollars per hour ($/hr), depending on the context.

To find the rate at which the tip of the shadow is moving, we can use similar triangles.

Let's denote:

H as the height of the man (6 feet),L as the distance from the man to the street light (unknown),h as the height of the street light (16 feet),x as the distance from the man's feet to the tip of the shadow (unknown).

Based on similar triangles, we have the following ratio:

[tex]\frac{(L + x)}{ x} = \frac{(H + h)}{ H}[/tex]

Substituting the given values, we have:

[tex]\frac{(L + x)}{ x} = \frac{(6 + 16)}{ 6}=\frac{22}{6}[/tex]

To find the rate at which the tip of the shadow is moving, we need to differentiate this equation with respect to time t:

[tex]\frac{d}{dt}[\frac{(L + x)}{ x}]= \frac{d}{dt}[\frac{22}{ 6}][/tex]

To simplify the equation, we assume that L and x are functions of time t.

Let's differentiate the equation with respect to t:

[tex]\frac{[(\frac{dL}{dt} + \frac{dx}{dt})*x-(\frac{dL}{dt} + \frac{dx}{dt})*(L+x)]}{x^2}=0[/tex]

Simplifying further:

[tex](\frac{dL}{dt} + \frac{dx}{dt})= (L+x)*\frac{\frac{dx}{dt}}{x}[/tex]

We know that [tex]\frac{dx}{dt}[/tex] is given as 5 ft/s (the rate at which the man is walking towards the street light)

Now we can solve for [tex]\frac{dL}{dt}[/tex], which represents the rate at which the tip of the shadow is moving:

[tex]\frac{dL}{dt}= (L+x)*\frac{\frac{dx}{dt}}{x}- \frac{dx}{dt}[/tex]

Substituting the given values and rearranging the equation, we have:

[tex]\frac{dL}{dt}= (L+x-x)\frac{\frac{dx}{dt}}{x}[/tex]

Substituting L = 6 feet, [tex]\frac{dx}{dt}[/tex] = 5 ft/s, and solving for x:

[tex]x =\frac{22}{6}*L\\ =\frac{22}{6}*6\\ =22[/tex]

Substituting these values into the equation for [tex]\frac{dL}{dt}[/tex]:

[tex]\frac{dL}{dt}=6*\frac{5}{22}\\=\frac{30}{22}[/tex]

≈ 1.36 ft/s

Therefore, the tip of the shadow is moving at a rate of approximately 1.36 feet per second.

To learn more about the rate  from the given link

brainly.com/question/4895463

#SPJ4

20 POINTS
Choose A, B, or C

Answers

The simplified expression of 3x³ - 2x + 4 - x²  + x is determined as 3x³ - x² - x + 4.

option A is the correct answer.

What is the simplification of the expression?

Simplifying expressions mean rewriting the same algebraic expression with no like terms and in a compact manner.

The given expression;

= 3x³ - 2x + 4 - x²  + x

The given expression is simplified as follows by collecting similar terms or adding similar terms together as shown below;

= 3x³ - x² - x + 4

Thus, the simplified expression of 3x³ - 2x + 4 - x²  + x is determined as 3x³ - x² - x + 4.

Learn more about simplification here: https://brainly.com/question/28008382

#SPJ1

A jar of peanut butter contains 456 grams with a standard deviation of 10.4 grams. Assuming a normal distribution, find the probability that a jar contains less than 453 grams.

Answers

To find the probability that a jar contains less than 453 grams, we need to standardize the value using the z-score and then use the standard normal distribution table.

The z-score is calculated as follows:

z = (x - μ) / σ

Where x is the value we want to find the probability for, μ is the mean, and σ is the standard deviation.

In this case, x = 453 grams, μ = 456 grams, and σ = 10.4 grams.

Substituting the values, we get:

z = (453 - 456) / 10.4

z ≈ -0.2885

Next, we look up the probability associated with this z-score in the standard normal distribution table. The table gives us the probability for z-values up to a certain point. From the table, we find that the probability associated with a z-score of -0.2885 is approximately 0.3869. Therefore, the probability that a jar contains less than 453 grams is approximately 0.3869, or 38.69%.

learn more about z-score here:

https://brainly.com/question/31871890

#SPJ11

a standard die is rolled until a six rolls. each time a six does not roll, a fair coin is tossed, and a running tally of the number of heads minus the number of tails is kept. (for example, if the die rolls are 5, 2, 1, 6, and the coin tosses are h, h, t, then the running tally is 1, 2, 1.) what is the probability that the absolute value of the running tally never equals 3?

Answers

The probability that the absolute value of the running tally never equals 3 is approximately 0.718, or 71.8%. In this scenario, the running tally can only change by 1 each time the coin is tossed, either increasing or decreasing. It starts at 0, and we need to calculate the probability that it never reaches an absolute value of 3.

To find the probability, we can break down the problem into smaller cases. First, we consider the probability of reaching an absolute value of 1. This happens when there is either 1 head and no tails or 1 tail and no heads. The probability of this occurring is 1/2.

Next, we calculate the probability of reaching an absolute value of 2. This occurs in two ways: either by having 2 heads and no tails or 2 tails and no heads. Each of these possibilities has a probability of (1/2)² = 1/4.

Since the running tally can only increase or decrease by 1, the probability of never reaching an absolute value of 3 can be calculated by multiplying the probabilities of not reaching an absolute value of 1 or 2. Thus, the probability is (1/2) * (1/4) = 1/8.

However, this calculation only considers the case of the first coin toss. We need to account for the fact that the coin can be tossed multiple times. To do this, we can use a geometric series with a success probability of 1/8. The probability of never reaching an absolute value of 3 is given by 1 - (1/8) - (1/8)² - (1/8)³ - ... = 1 - 1/7 = 6/7 ≈ 0.857. However, we need to subtract the probability of reaching an absolute value of 2 in the first coin toss, so the final probability is approximately 0.857 - 1/8 ≈ 0.718, or 71.8%.

Learn more about probability here: https://brainly.com/question/31828911

#SPJ11

A tree is standing next to a 40-foot high building. The tree has an 18-foot shadow, while the building has a 16-foot
shadow. How tall is the tree, rounded to the nearest foot? (sketch a picture)
Tree height:

Answers

The height of the tree can be determined using the concept of similar triangles. With an 18-foot shadow and a 40-foot height for the building. The height of the tree is approximately 45 feet.

Let's consider the similar triangles formed by the tree, its shadow, the building, and its shadow. The ratio of the height of the tree to the length of its shadow is the same as the ratio of the height of the building to the length of its shadow. We can set up a proportion to solve for the height of the tree.

Using the given information, we have:

Tree's shadow: 18 feet

Building's shadow: 16 feet

Building's height: 40 feet

Let x be the height of the tree. We can set up the proportion as follows:

x / 18 = 40 / 16

Cross-multiplying, we get:

16x = 18 * 40

Simplifying, we have:

16x = 720

Dividing both sides by 16, we find:

x = 45

Therefore, the height of the tree is approximately 45 feet.

Learn more about triangle here:

https://brainly.com/question/2773823

#SPJ11

In R3, the point (1,1,1) does not belong to the sphere x2 + y2 + 2 = 3. - Select one: O True O False The value of the triple integral E x² + y2 + z2 = 4 with 0 < y, is in the interval (0, 30). SIS

Answers

The statement is True. The point (1,1,1) does not belong to the sphere x^2 + y^2 + 2 = 3, and the value of the triple integral ∫E x^2 + y^2 + z^2 = 4 with 0 < y is in the interval (0, 30).

Explanation:Given:In R3, the point (1,1,1) does not belong to the sphere x2 + y2 + 2 = 3.To Check: True or FalseExplanation:The sphere can be represented as below:x² + y² + 2 = 3Simplifying the above equation:x² + y² = 1For (1,1,1) to belong to the sphere, it must satisfy the above equation by replacing x, y, and z values as follows:x=1, y=1, z=1When we substitute the above values in the equation x² + y² = 1, it does not satisfy the equation.Hence, the statement is True.The value of the triple integral E x² + y² + z² = 4 with 0 < y, is in the interval (0, 30).It can be calculated as follows:Let the triple integral be denoted by I.$$I = \int \int \int_E x^2+y^2+z^2 dx dy dz$$Where E represents the region in R3 defined by the conditions:0 < yx²+y²+z² ≤ 4y > 0To calculate the triple integral, we first integrate with respect to x:$$I_x = \int_{0}^{2\pi}\int_{0}^{\sqrt{4-y^2}}\int_{0}^{\sqrt{4-x^2-y^2}} x^2+y^2+z^2 dzdx\ d\theta\ dy$$After performing integration with respect to z, the integral is now:$$I_x = \int_{0}^{2\pi}\int_{0}^{\sqrt{4-y^2}} [\frac{1}{3}z^3+z^2(y^2+x^2)^{\frac{1}{2}}]_0^{\sqrt{4-x^2-y^2}}dx\ d\theta\ dy$$Simplifying the above equation:$$I_x = \int_{0}^{2\pi}\int_{0}^{\sqrt{4-y^2}} \frac{8}{3}[(x^2+y^2)^{\frac{3}{2}}-(x^2+y^2)^{\frac{1}{2}}]\ dx\ d\theta\ dy$$After integrating with respect to x, the integral becomes:$$I = \int_{0}^{2\pi}\int_{0}^{2} \frac{8}{3}[(x^2+y^2)^{\frac{3}{2}}-(x^2+y^2)^{\frac{1}{2}}]\ dx\ d\theta\ dy$$Finally, we integrate with respect to y:$$I = \int_{0}^{2\pi}\int_{0}^{2} \frac{8}{3}[(x^2+y^2)^{\frac{3}{2}}-(x^2+y^2)^{\frac{1}{2}}]\ dy\ d\theta\ dx$$On simplification, the integral becomes:I = $\frac{32\pi}{3}$By considering the value of y such that 0 < y < 2, the interval is (0, 30).Hence, the statement is True.

learn more about integral here;

https://brainly.com/question/30001995?

#SPJ11

Apply the three-step method to compute the derivative of f(x) = 8x3. '0 f'(x) =

Answers

The derivative of f(x) =[tex]8x^3[/tex] is f'(x) = [tex]24x^2[/tex].

To compute the derivative of f(x) = 8x^3 using the three-step method, we can follow these steps:

Step 1: Identify the power rule for derivatives, which states that if f(x) = x^n, then f'(x) = nx^(n-1).

Step 2: Apply the power rule to the function f(x) = 8x^3. Since the power is 3, we differentiate the term 8x^3 by multiplying the coefficient 3 by the power of x, which is (3-1):

f'(x) = 3 * 8x^(3-1) = 24x^2.

Step 3: Simplify the derivative. After applying the power rule, we obtain the final result: f'(x) = 24x^2.

Therefore, the derivative of f(x) = 8x^3 is f'(x) = 24x^2.

Learn more about power rule here:

https://brainly.com/question/23418174

#SPJ11

suppose that a certain college class contains students. of these, are freshmen, are business majors, and are neither. a student is selected at random from the class. (a) what is the probability that the student is both a freshman and a business major? (b) given that the student selected is a freshman, what is the probability that he is also a business major?

Answers

(a) The probability that a randomly selected student is both a freshman and a business major cannot be determined without knowing the specific numbers of students in each category. (b) Without information on the number of freshmen and business majors, the probability that a freshman is also a business major cannot be calculated.

To further explain the answer, let's assume that there are a total of N students in the class. Among these, the number of freshmen is given as F, the number of business majors is given as B, and the number of students who are neither is given as N - F - B.

(a) The probability that a student is both a freshman and a business major can be calculated by dividing the number of students who fall into both categories (let's call it FB) by the total number of students (N). So the probability is FB/N.

(b) Given that the student selected is a freshman, we only need to consider the subset of students who are freshmen. Among these freshmen, the number of business majors is B. Therefore, the probability that a freshman is also a business major is B/F.

Learn more about probability here: https://brainly.com/question/31828911

#SPJ11

2 of the triple integral in rectangular coordinates that gives the volume of the sold enclosed by the cone 2-Vx+y and the sphere x2+2+2 47 l LIL 1 didydx. Then a 02 D- III 1

Answers

The triple integral in rectangular coordinates that gives the volume of the solid enclosed by the cone and the sphere can be set up as follows:

∫∫∫ V dV

Here, V represents the region enclosed by the cone and the sphere. To determine the limits of integration, we need to find the boundaries of V in each coordinate direction.

Let's consider the cone equation first: [tex]2 - Vx + y = 0.[/tex] Solving for y, we have [tex]y = Vx + 2[/tex], where V represents the slope of the cone.

Next, the sphere equation is [tex]x^2 + y^2 + z^2 = 47[/tex]. Since we are looking for the volume enclosed by the cone and the sphere, the z-coordinate is bounded by the cone and the sphere.

To find the limits of integration, we need to determine the region of intersection between the cone and the sphere. This can be done by solving the cone equation and the sphere equation simultaneously.

Substituting y = Vx + 2 into the sphere equation, we get [tex]x^2 + (Vx + 2)^2 + z^2 = 47[/tex]. This equation represents the curve of intersection between the cone and the sphere.

Once we have the limits of integration for x, y, and z, we can evaluate the triple integral to find the volume of the solid enclosed by the cone and the sphere.

learn more about  solid enclosed here:

https://brainly.com/question/28328407

#SPJ11

"Consider the region enclosed by the cone z = √(x^2 + y^2) and the sphere x^2 + y^2 + z^2 = 47. Evaluate the triple integral ∭R (1) dV, where R represents the region enclosed by these surfaces, in rectangular coordinates. Then, express the result as a decimal number rounded to two decimal places."

Differentiate implicitly to find dy dx Then, find the slope of the curve at the given point. 5x2 – 3y2 = 19; (15,12) ; √5 dy dx The slope of the curve at (15,72) is (Type an exact answer, using radicals as needed.)

Answers

After differentiating implicitly, the slope of the curve at the point (15, 12) is found to be approximately 2.777.

The first step is to differentiate the equation implicitly with respect to x, which involves finding the derivatives of both sides of the equation. Then, substituting the given point (15, 12) into the derivative expression will allow us to find the slope of the curve at that point.

To find dy/dx implicitly, we differentiate both sides of the equation 5x^2 - 3y^2 = 19 with respect to x.

Differentiating the left side, we apply the power rule and chain rule.

The derivative of 5x^2 with respect to x is 10x. For the derivative of -3y^2, we use the chain rule, which states that if we have a composition of functions, the derivative is the derivative of the outer function multiplied by the derivative of the inner function. The derivative of -3y^2 with respect to y is -6y.

However, since we are finding dy/dx, we multiply by dy/dx to incorporate the chain rule. Therefore, the derivative of -3y^2 with respect to x is -6y(dy/dx).

Setting up the equation and isolating dy/dx, we have:

10x - 6y(dy/dx) = 0

dy/dx = (10x) / (6y)

Now we substitute the given point (15, 12) into the expression for dy/dx to find the slope of the curve at that point. Plugging in x = 15 and y = 12, we have:dy/dx = (1015) / (612) = 25/9 = 2.777...

Therefore, the slope of the curve at the point (15, 12) is approximately 2.777.

Learn more about implicit differentiation:

https://brainly.com/question/11887805

#SPJ11

clear legible work please
4 Find the integral of S 1 dx when n=10 In x 2 a) Solve using trapezoidal rule b) Solve using midpoint rule c) Solve using simpons rule State approximate decimal answers

Answers

the integral of 1 dx when n = 10 using different numerical integration methods, let's use the trapezoidal rule, midpoint rule, and Simpson's rule.

a) Trapezoidal Rule:The trapezoidal rule approximates the integral by approximating the area under the curve as a trapezoid.

Using the we have:

∫(1 dx) ≈ (Δx/2) * [f(x0) + 2 * (f(x1) + f(x2) + ... + f(xn-1)) + f(xn)]

where Δx = (b - a) / n is the interval width, and f(x) = 1.

In this case, a = 2, b = 10, and n = 10.

Δx = (10 - 2) / 10 = 8 / 10 = 0.8

x0 = 2

x1 = 2 + 0.8 = 2.8x2 = 2.8 + 0.8 = 3.6

...xn = 10

Plugging these values into the trapezoidal rule formula:

∫(1 dx) ≈ (0.8/2) * [1 + 2 * (1 + 1 + ... + 1) + 1] ≈ (0.8/2) * [1 + 2 * 9 + 1] ≈ (0.8/2) * 19 ≈ 7.6

So, using the trapezoidal rule, the approximate value of the integral is 7.6.

b) Midpoint Rule:

The midpoint rule approximates the integral by evaluating the function at the midpoint of each interval and multiplying it by the width of the interval.

Using the midpoint rule, we have:

∫(1 dx) ≈ Δx * [f((x0 + x1)/2) + f((x1 + x2)/2) + ... + f((xn-1 + xn)/2)]

In this case, using the same values for a, b, and n as before, we have:

Δx = 0.8

Using the midpoint rule formula:

∫(1 dx) ≈ 0.8 * [1 + 1 + ... + 1] ≈ 0.8 * 10 ≈ 8

So, using the midpoint rule, the approximate value of the integral is 8.

c) Simpson's Rule:Simpson's rule approximates the integral using quadratic polynomials.

Using Simpson's rule, we have:

∫(1 dx) ≈ (Δx/3) * [f(x0) + 4 * f(x1) + 2 * f(x2) + 4 * f(x3) + ... + 2 * f(xn-2) + 4 * f(xn-1) + f(xn)]

In this case, using the same values for a, b, and n as before, we have:

Δx = 0.8

Using Simpson's rule formula:

∫(1 dx) ≈ (0.8/3) * [1 + 4 * 1 + 2 * 1 + 4 * 1 + ... + 2 * 1 + 4 * 1 + 1] ≈ (0.8/3) * [1 + 4 * 9 + 1] ≈ (0.8/3) * 38 ≈ 10.133333333

Learn more about function here:

https://brainly.com/question/30721594

#SPJ11

3 у Find the length of the curve x = 3 - + 1 from y = 1 to y = 4. 4y The length of the curve is (Type an integer or a simplified fraction.)

Answers

The length of the curve is 3√17/4.. to find the length of the curve defined by the equation x = 3 - (y/4) from y = 1 to y = 4, we can use the arc length formula for a curve in cartesian coordinates .

the arc length formula is given by:

l = ∫ √[1 + (dx/dy)²] dy

first, let's find dx/dy by differentiating x with respect to y:

dx/dy = -1/4

now we can substitute this into the arc length formula:

l = ∫ √[1 + (-1/4)²] dy

 = ∫ √[1 + 1/16] dy

 = ∫ √[17/16] dy

 = ∫ (√17/4) dy

 = (√17/4) ∫ dy

 = (√17/4) y + c

to find the length of the curve from y = 1 to y = 4, we evaluate the definite integral:

l = (√17/4) [y] from 1 to 4

 = (√17/4) (4 - 1)

 = (√17/4) (3)

 = 3√17/4

Learn more about coordinates here:

https://brainly.com/question/22261383

#SPJ11

Please help i do not understand at all

Answers

The final graph should resemble a "V" shape starting from the origin and extending to the right (with two lines converging at the origin).

The given polynomial function f meets the criteria of being negative for all real numbers and having an increasing slope when x is less than -1 and between 0 and 1. Therefore, we can represent this graphically on the coordinate plane by starting at the origin (x=0, y=0). We can then plot a line going from the origin with a negative slope (moving left to right). This will represent the increasing slope of the graph when x<-1 and 0<x<1.

We can then plot a line going from the origin with a positive slope (moving left to right). This will represent the decreasing slope of the graph when -1<x<0 and x>1.

The final graph should resemble a "V" shape starting from the origin and extending to the right (with two lines converging at the origin). The graph should be entirely below the x-axis, since the given polynomial function is negative for all real numbers.

Therefore, the final graph should resemble a "V" shape starting from the origin and extending to the right (with two lines converging at the origin).

To learn more about the function visit:

https://brainly.com/question/28303908.

#SPJ1

Find the work done by F in moving a particle once counterclockwise around the given curve. = F= (3x - 5y)i + (5x – 3y); C: The circle (x-4)2 + (y – 4)2 = 16 = ... What is the work done in one counterclockwise circulation?

Answers

We are given a vector field F = (3x - 5y)i + (5x - 3y)j and a curve C defined by the equation (x-4)^2 + (y-4)^2 = 16. We need to find the work done by F in moving a particle once counterclockwise around the curve.

The work done by a vector field F in moving a particle along a curve is given by the line integral of F along that curve. In this case, we need to evaluate the line integral ∮F · dr, where dr is the differential displacement vector along the curve.

To calculate the line integral, we can parameterize the curve C. Since C is a circle centered at (4, 4) with radius 4, we can use the parameterization x = 4 + 4cos(t) and y = 4 + 4sin(t), where t ranges from 0 to 2π.

Next, we calculate dr as the differential displacement vector along the curve:

dr = dx i + dy j = (-4sin(t))i + (4cos(t))j.

Substituting the parameterization and dr into the line integral ∮F · dr, we have:

∮F · dr = ∫[F(x, y) · dr] = ∫[(3x - 5y)(-4sin(t)) + (5x - 3y)(4cos(t))] dt.

Evaluating this integral over the range 0 to 2π will give us the work done by F in moving a particle once counterclockwise around the curve C.

Note: The detailed calculation of the line integral involves substituting the parameterization and performing the integration. Due to the length and complexity of the calculation, it is not possible to provide the exact numerical value in this text-based format.

Learn more about vector here;

https://brainly.com/question/30481491

#SPJ11

help
Find the point on the line - 200 + 3y + 4 = 0 which is closest to the point (-1, -1). fs - 2x+3x+4 Please enter exact answers in whole numbers or factions. fx= -2 fy - 3

Answers

The equation 400 = 0 is not true, so the two lines do not intersect. This means that there is no point on the given line that is closest to the point (-1, -1).

To find the point on the line -200 + 3y + 4 = 0 that is closest to the point (-1, -1), we can use the concept of perpendicular distance.

The given line can be rewritten as 3y - 196 = 0 by rearranging the terms.

We can express the distance between any point (x, y) on the line and the point (-1, -1) as the distance formula:

d = √[(x - (-1))^2 + (y - (-1))^2]

 = √[(x + 1)^2 + (y + 1)^2]

We want to minimize this distance. Since the line is perpendicular to the shortest distance between the point (-1, -1) and the line, the slope of the line will be the negative reciprocal of the slope of the given line.

The slope of the given line is found by rearranging the equation in slope-intercept form: y = (-4/3)x + 196/3. So, the slope of the given line is -4/3.

The slope of the perpendicular line will be 3/4.

Now, let's find the equation of the perpendicular line passing through the point (-1, -1) using the point-slope form:

y - (-1) = (3/4)(x - (-1))

y + 1 = (3/4)(x + 1)

4(y + 1) = 3(x + 1)

4y + 4 = 3x + 3

4y = 3x - 1

So, the equation of the perpendicular line passing through (-1, -1) is 4y = 3x - 1.

To find the point of intersection between the given line and the perpendicular line, we can solve the system of equations:

3y - 196 = 0 (equation of the given line)

4y = 3x - 1 (equation of the perpendicular line)

Solving this system of equations, we can substitute the value of y from the first equation into the second equation:

3(196/3 + 4) - 196 = 0

588 + 12 - 196 = 0

400 = 0

The equation 400 = 0 is not true, so the two lines do not intersect. This means that there is no point on the given line that is closest to the point (-1, -1).

Therefore, there is no solution to this problem.

To know more about intersect refer here:

https://brainly.com/question/12089275#

#SPJ11

Polar coordinates: Problem 6 Previous Problem Problem List Next Problem (1,5). Among all the lines through P, there is only one line (1 point) Point P has polar coordinates 1, P such that P is closer to the origin than any other point on that line. Write a polar coordinate equation for this special line in the form: r is a function of O help (formulas) r (Write "theta" (without quotes) to enter 0, and "pi" to enter , in your answer.)

Answers

To find the polar coordinate equation for the special line passing through point P(1, 5) such that P is closer to the origin than any other point on that line, we need to determine the equation in the form r = f(θ).

We can start by expressing point P in Cartesian coordinates:

P(x, y) = (1, 5)

To convert this to polar coordinates, we can use the following formulas:

r = √(x² + y²)

θ = arctan(y/x)

Applying these formulas to point P, we have:

r = √(1² + 5²)

 = √(1 + 25)

 = √26

θ = arctan(5/1)

   = arctan(5)

   ≈ 1.373

Therefore, the polar coordinate equation for the special line is:

r = √26

The angle θ can take any value since the line extends infinitely in all directions. Thus, θ remains as a variable.

The polar coordinate equation for the special line passing through point P(1, 5) is:

r = √26, where θ is any real number.

To know more about equation visit;

brainly.com/question/10724260

#SPJ11

How many times bigger is 12^8 than 12^5

Answers

Answer:

1,728

Step-by-step explanation:

To determine how many times bigger 12^8 is than 12^5, we need to divide 12^8 by 12^5.

The general rule for dividing exponents with the same base is to subtract the exponents. In this case, we have:

12^8 / 12^5 = 12^(8-5) = 12^3

So, 12^8 is 12^3 times bigger than 12^5.

Calculating 12^3:

12^3 = 12 * 12 * 12 = 1,728

Therefore, 12^8 is 1,728 times bigger than 12^5.

b. Calculate Si°3x2 dx by first writing it as a limit of a Riemann sum. Then evaluate the limit. You may (or not) need some of these formulas. n n n Ei n(n+1) 2 į2 n(n + 1)(2n + 1) 6 Σ = = r2 = In(

Answers

The integral ∫(0 to 3) x^2 dx can be written as the limit of a Riemann sum as the number of subintervals approaches infinity.

To evaluate the limit, we can use the formula for the sum of the squares of the first n natural numbers:

Σ(i=1 to n) [tex]i^2[/tex] = n(n + 1)(2n + 1)/6

In this case, the integral is from 0 to 3, so a = 0 and b = 3. Therefore, the width of each subinterval is Δx = (3 - 0)/n = 3/n.

Plugging these values into the Riemann sum formula, we have:

∫(0 to 3) x^2 dx = lim (n→∞) Σ(i=1 to n) [tex](iΔx)^2[/tex]

= lim (n→∞) Σ(i=1 to n) [tex](3i/n)^2[/tex]

= lim (n→∞) Σ(i=1 to n) [tex]9i^2/n^2[/tex]

Applying the formula for the sum of squares, we have:

= lim (n→∞) ([tex]9/n^2[/tex]) Σ(i=1 to n)[tex]i^2[/tex]

= lim (n→∞) ([tex]9/n^2[/tex]) * [n(n + 1)(2n + 1)/6]

Simplifying further, we get:

= lim (n→∞) ([tex]3/n^2[/tex]) * (n^2 + n)(2n + 1)/2

= lim (n→∞) (3/2) * (2 + 1/n)(2n + 1)

Taking the limit as n approaches infinity, we find:

= (3/2) * (2 + 0)(2*∞ + 1)

= (3/2) * 2 * ∞

= ∞

Therefore, the value of the integral ∫(0 to 3) x^2 dx is infinity.

Learn more about Riemann sum here:

https://brainly.com/question/30404402

#SPJ11

Solve the initial value problem. Vydx + (4 + x)dy = 0, y( – 3)=9 The solution is (Type an implicit solution. Type an equation using x and y as the variables.)

Answers

The solution to the initial value problem, vydx + (4 + x)dy = 0, y(–3) = 9 is:

y = 9/(4 + x)

To solve the initial value problem vydx + (4 + x)dy = 0, y(–3) = 9, we'll separate the variables and integrate both sides.

Let's begin by rearranging the equation to isolate the variables:

vydx = -(4 + x)dy

Next, we'll divide both sides by (4 + x) and y:

(1/y)dy = -(1/(4 + x))dx

Now, we can integrate both sides:

∫(1/y)dy = ∫-(1/(4 + x))dx

Integrating the left side with respect to y gives us:

ln|y| = -ln|4 + x| + C1

Where C1 is the constant of integration.

Applying the natural logarithm properties, we can simplify the equation:

ln|y| = ln|1/(4 + x)| + C1

ln|y| = ln|1| - ln|4 + x| + C1

ln|y| = -ln|4 + x| + C1

Now, we'll exponentiate both sides using the property of logarithms:

e^(ln|y|) = e^(-ln|4 + x| + C1)

Simplifying further:

y = e^(-ln|4 + x|) * e^(C1)

Since e^C1 is just a constant, let's write it as C2:

y = C2/(4 + x)

Now, we'll use the initial condition y(–3) = 9 to find the value of the constant C2:

9 = C2/(4 + (-3))

9 = C2/1

C2 = 9

Therefore, the solution to the initial value problem is given by:

y = 9/(4 + x)

This is the implicit solution, represented by an equation using x and y as variables.

Learn more about initial value problem here, https://brainly.com/question/31041139

#SPJ11

Write the solution set of the given homogeneous system in parametric vector form.
X+2Xz+9X3 =0
2X1+ X2 + 9X3 = 0
- X1 + X2
= 0

Answers

To find the solution set of the given homogeneous system, we can write it in augmented matrix form and perform row operations to obtain the parametric vector form. The augmented matrix for the system is:

[1 2 9 | 0]

[2 1 9 | 0]

[-1 1 0 | 0]

By performing row operations, we can reduce the augmented matrix to its row-echelon form:

[1 2 9 | 0]

[0 -3 -9 | 0]

[0 3 9 | 0]

From this row-echelon form, we can see that the system has infinitely many solutions. We can express the solution set in parametric vector form by assigning a parameter to one of the variables. Let's assign the parameter t to X2. Then, we can express X1 and X3 in terms of t:

X1 = -2t

X2 = t

X3 = -t

Therefore, the solution set of the given homogeneous system in parametric vector form is:

X = [-2t, t, -t], where t is a parameter.

To learn more about homogeneous system: -brainly.com/question/30502489#SPJ11

Find an equation for the plane tangent to the given surface at
the specified point. x = u, y = u2 + 2v, z = v2, at (0, 6, 9)

Answers

The equation for the plane tangent to the surface at the point (0, 6, 9) is 6y - z = 27.

To find the equation for the plane tangent to the surface defined by the parametric equations x = u, y = u^2 + 2v, z = v^2, at the specified point (0, 6, 9), we need to determine the normal vector to the tangent plane.

The normal vector can be obtained by taking the cross product of the partial derivatives of the surface equations with respect to the parameters u and v at the given point.

Let's find the partial derivatives first:

∂x/∂u = 1

∂x/∂v = 0

∂y/∂u = 2u

∂y/∂v = 2

∂z/∂u = 0

∂z/∂v = 2v

Evaluating the partial derivatives at the point (0, 6, 9):

∂x/∂u = 1

∂x/∂v = 0

∂y/∂u = 0

∂y/∂v = 2

∂z/∂u = 0

∂z/∂v = 12

Taking the cross product of the partial derivatives:

N = (∂y/∂u * ∂z/∂v - ∂z/∂u * ∂y/∂v, ∂z/∂u * ∂x/∂v - ∂x/∂u * ∂z/∂v, ∂x/∂u * ∂y/∂v - ∂y/∂u * ∂x/∂v)

= (0 * 12 - 0 * 2, 0 * 0 - 1 * 12, 1 * 2 - 0 * 0)

= (0, -12, 2)

Therefore, the normal vector to the tangent plane is N = (0, -12, 2).

Now, we can write the equation for the tangent plane using the point-normal form of a plane:

0(x - 0) - 12(y - 6) + 2(z - 9) = 0

Simplifying:

-12y + 72 + 2z - 18 = 0

-12y + 2z + 54 = 0

-12y + 2z = -54

Dividing by -2 to simplify the coefficients:

6y - z = 27

So, the equation for the plane tangent to the surface at the point (0, 6, 9) is 6y - z = 27.

To learn more about tangent plane click here

brainly.com/question/30260323

#SPJ11

Nakul starts his journey to his school by scooter at 9 am and reaches his school at 1 pm. if he drives the scooter at a speed of 30 km/hr. By how much should he increase the speed of the scooter so that he can reach the school by 12 noon ?

Answers

Answer:

(30 km/hr)(4 hr) = 120 km

120 km/3 hr = 40 km/hr

Nakul should increase the speed of the scooter by 10 km/hr.

a study will be conducted to construct a 90% confidence interval for a population proportion. an error of 0.2 is desired. there is no knowledge as to what the population proportion will be. what sample size is required ?

Answers

A sample size of 17 is required to construct a 90% confidence interval for a population proportion with an error of 0.2.

To determine the sample size required to construct a 90% confidence interval for a population proportion with an error of 0.2 (or 20%), we need to use the formula for sample size calculation in proportion estimation.

The formula for sample size in proportion estimation is:

n = (Z² * p * q) / E²

Where:

n = required sample size

Z = Z-score corresponding to the desired confidence level (90% confidence level corresponds to a Z-score of approximately 1.645)

p = estimated or assumed population proportion (since there is no knowledge about the population proportion, we can assume a conservative value of 0.5 to get the maximum sample size)

q = 1 - p (complement of p)

E = desired margin of error (0.2 or 20% in this case)

Substituting the values into the formula:

n = (1.645² * 0.5 * (1 - 0.5)) / 0.2²

n = (2.705 * 0.5 * 0.5) / 0.04

n = 0.67625 / 0.04

n ≈ 16.90625

Since the sample size must be a whole number, we round up the result to the nearest whole number:

n = 17

Therefore, a sample size of 17 is required to construct a 90% confidence interval for a population proportion with an error of 0.2.

It's important to note that this calculation assumes maximum variability in the population proportion (p = 0.5) to ensure a conservative estimate. If there is any information or prior knowledge available about the population proportion, it should be used to refine the sample size calculation.

for more such question on interval visit

https://brainly.com/question/30460486

#SPJ8

Multiply the question below (with an explanation)
(0.1x^2 + 0.01x + 1) by (0.1x^2)

Answers

Answer:

Step-by-step explanation:

Distribute the 0.1x² to each term of the trinomial

(0.1x²)(0.1x² + 0.01x + 1)

.001x^4+.001x^3+.1x²

- the power of each term is added as the coefficients are multiplied

If an angle is compounded four times (alternate normal and plunged) and the last angle reads 6°02', determine all possible values for the correct horizontal angle. a) 1°30'30" b)91°30'30" c)181°30'30" d)271°30'30"

Answers

The possible values for the correct horizontal angle after compounding four times are 0°00'00" and 180°00'00".

To determine all possible values for the correct horizontal angle, we need to understand the effect of compounding angles.

When an angle is compounded multiple times by alternating between normal and plunged positions, each compounding introduces a rotation of 180 degrees. However, it's important to note that the original position and the direction of rotation are crucial for determining the correct horizontal angle.

In this case, the last angle reads 6°02', which means it is the result of four compounded angles. We'll start by considering the original position as 0 degrees and rotating clockwise.

Since each compounding introduces a 180-degree rotation, the first angle would be 180 degrees, the second angle would be 360 degrees, the third angle would be 540 degrees, and the fourth angle would be 720 degrees.

However, we need to convert these angles to the standard notation of degrees, minutes, and seconds.

180 degrees can be written as 180°00'00"

360 degrees can be written as 0°00'00" (as it completes a full circle)

540 degrees can be written as 180°00'00"

720 degrees can be written as 0°00'00" (as it completes two full circles)

Therefore, the possible values for the correct horizontal angle after compounding four times are 0°00'00" and 180°00'00".

Comparing these values with the options provided:

a) 1°30'30" is not a possible value.

b) 91°30'30" is not a possible value.

c) 181°30'30" is not a possible value.

d) 271°30'30" is not a possible value.

Thus, the correct answer is that the possible values for the correct horizontal angle are 0°00'00" and 180°00'00".

for more such question on angle visit

https://brainly.com/question/25716982

#SPJ8

Let R be the region in the first quadrant bounded below by the parabola y = x² and above by the line y = 2. Then the value of [yx dd is: None of these This option This option 6 3

Answers

None of the provided options matches the calculated value. To find the value of the expression [yxd2], we need to evaluate the double integral over the region R.

The expression [yxd2]suggests integration with respect to both x and y.

The region R is bounded below by the parabola y = x² and above by the line y = 2. We need to find the points of intersection between these curves to determine the limits of integration.

Setting y = x² and y = 2 equal to each other, we have:

x² = 2

Solving this equation, we find two solutions: x = ±√2. However, we are only interested in the region in the first quadrant, so we take x = √2 as the upper limit.

Thus, the limits of integration for x are from 0 to √2, and the limits of integration for y are from x² to 2.

Now, let's set up the double integral:

[yxd2]=∫∫RyxdA

Since the integrand is yx, we reverse the order of integration:

[yxd2]=∫₀²∫ₓ²²yxdydx

Integrating with respect to y first, we have:

[yxd2]=∫₀²[∫ₓ²²yxdy]dx

The inner integral becomes:

∫ₓ²²yxdy=[1/2y²x]ₓ²²=(1/2)(22x²−x⁶)

Substituting this back into the outer integral, we have:

[yxd2]=∫₀²(1/2)(22x²−x⁶)dx

Evaluating this integral:

[yxd2]=(1/2)[22/3x³−1/7x⁷]ₓ₀²

= (1/2) [22/3(2³) - 1/7(2⁷) - 0]

= (1/2) [352/3 - 128/7]

= (1/2) [(11776 - 2432)/21]

= (1/2) [9344/21]

= 4672/21

Therefore, the value of [yx d^2] is 4672/21.

None of the provided options matches the calculated value.

Learn more about parabola here:

https://brainly.com/question/11911877

#SPJ11

Find the derivative of:
h(x)=(x^(-1/3))(x-16) as in: x to the -1/3 power multiplied by
x-16

Answers

The derivative of [tex]\(h(x) = x^{-\frac{1}{3}}(x-16)\)[/tex] is given by: [tex]\[h'(x) = -\frac{1}{3}x^{-\frac{4}{3}}(x-16) + x^{-\frac{1}{3}}\][/tex] In other words, the derivative of h(x) is equal to [tex]\(-\frac{1}{3}\) times \(x^{-\frac{4}{3}}\)[/tex] multiplied by [tex]\((x-16)\)[/tex], plus [tex]\(x^{-\frac{1}{3}}\)[/tex].

To find the derivative of [tex]\(h(x)\)[/tex], we can use the product rule of differentiation. The product rule states that if [tex]\(f(x) = g(x) \cdot h(x)\)[/tex], then [tex]\(f'(x) = g'(x) \cdot h(x) + g(x) \cdot h'(x)\)[/tex].

In this case, let's consider [tex]\(g(x) = x^{-\frac{1}{3}}\)[/tex] and [tex]\(h(x) = x-16\)[/tex]. Using the product rule, we differentiate g(x) and h(x) separately.

The derivative of  can be found using the power rule of differentiation. The power rule states that if [tex]\(f(x) = x^n\)[/tex], then [tex]\(f'(x) = n \cdot x^{n-1}\)[/tex]. Applying this rule, we get [tex]\(g'(x) = -\frac{1}{3}x^{-\frac{4}{3}}\).[/tex]

Next, we differentiate [tex]\(h(x) = x-16\)[/tex] using the power rule, which gives us [tex]\(h'(x) = 1\)[/tex].

Now, using the product rule, we can find the derivative of h(x) by multiplying g'(x) with h(x) and adding g(x) multiplied by h'(x). Simplifying the expression gives us [tex]\(h'(x) = -\frac{1}{3}x^{-\frac{4}{3}}(x-16) + x^{-\frac{1}{3}}\)[/tex], which is the final result.

To learn more about derivative refer:

https://brainly.com/question/31399580

#SPJ11

Please answer the following questions about the function f(x) = 2x2 x2 - 25 Instructions: • If you are asked for a function, enter a function. . If you are asked to find x- or y-values, enter either a number or a list of numbers separated by commas. If there are no solutions, enter None. . If you are asked to find an interval or union of intervals, use interval notation Enter() if an interval is empty. . If you are asked to find a limit, enter either a number, I for 0,- for -00, or DNE if the limit does not exist. (a) Calculate the first derivative off. Find the critical numbers off, where it is increasing and decreasing, and its local extrema. 0 f'(x) = -100x/(x^2-25)^2 Critical numbers x = Union of the intervals where f(x) is increasing (0.-Inf) Union of the intervals where S(x) is decreasing (-Info) Local maxima x = 0 Local minima x = DNE (b) Find the following left and right-hand limits at the vertical asymptote x = -5. 2x2 lim ---5x? - 25 11 + infinity 2x2 lim x-+-5x2 - 25 - infinity Find the following loft- and right-hand limits at the vertical asymptote x = 5. 2x lim X5 x2-25 - infinity : 2x2 lim --5+ x2 - 25 + infinity

Answers

The first derivative of the function f(x) = 2[tex]x^2[/tex] / ([tex]x^2[/tex] - 25) is -100x / [tex](x^2 - 25)^2[/tex]. The critical numbers are x = 0, where the function has a local maximum.

The function is increasing on the interval (-∞, 0) and decreasing on the interval (0, ∞).

To find the first derivative of f(x), we use the quotient rule and simplify the expression to obtain f'(x) = -100x / [tex](x^2 - 25)^2[/tex].

The critical numbers are the values of x where the derivative is equal to zero or undefined. In this case, the derivative is undefined at x = ±5 due to the denominator being zero. However, x = 5 is not a critical number since the numerator is also zero at that point. The critical number is x = 0, where the derivative equals zero.

To determine where the function is increasing or decreasing, we can analyze the sign of the derivative. The derivative is negative for x < 0, indicating that the function is decreasing on the interval (-∞, 0). Similarly, the derivative is positive for x > 0, indicating that the function is increasing on the interval (0, ∞).

Since the critical number x = 0 corresponds to a zero slope (horizontal tangent), it represents a local maximum of the function.

For the second part of the question, we are asked to find the left and right-hand limits as x approaches the vertical asymptote x = -5 and x = 5. The limit as x approaches -5 from the left is -∞, and as x approaches -5 from the right, it is +∞. Similarly, as x approaches 5 from the left, the limit is -∞, and as x approaches 5 from the right, it is +∞.

Learn more about first derivative here:

https://brainly.com/question/10023409

#SPJ11








Find the area of cross section of the graphs y = -0.3x + 5 and y = 0.3x² - 4 2

Answers

The area of the cross-section between the graphs y = -0.3x + 5 and y = 0.3x² - 4 is 37.83 square units.

To find the area of the cross-section, we need to determine the points where the two graphs intersect. Setting the equations equal to each other, we get:

-0.3x + 5 = 0.3x² - 4

0.3x² + 0.3x - 9 = 0

Simplifying further, we have:

x² + x - 30 = 0

Factoring the quadratic equation, we get:

(x - 5)(x + 6) = 0

Solving for x, we find two intersection points: x = 5 and x = -6.

Next, we integrate the difference between the two functions over the interval from -6 to 5 to find the area of the cross-section:

A = ∫[from -6 to 5] [(0.3x² - 4) - (-0.3x + 5)] dx

Evaluating the integral, we find:

A = [0.1x³ - 4x + 5x] from -6 to 5

A = [0.1(5)³ - 4(5) + 5(5)] - [0.1(-6)³ - 4(-6) + 5(-6)]

A = 37.83 square units

Therefore, the cross-section area between the two graphs is 37.83 square units.

Learn more quadratic equations here:

https://brainly.com/question/29269455

#SPJ11

(1) Let's consider f(x,y) dA where ƒ is a continuous function and R is the region in the first quadrant bounded by the y-axis, the line y = 4 and the curve y = r². R (a) Sketch R. (b) Write down an

Answers

To sketch the region R in the first quadrant bounded by the y-axis, the line y = 4, and the curve y = r², follow these steps:

Start by drawing the coordinate axes, the x-axis, and the y-axis.

Draw a vertical line at x = 0, representing the y-axis.

Draw a horizontal line at y = 4. This line will act as the upper boundary of the region R.

Plot the points (0, 4) and (0, 0) on the y-axis. These points represent the intersections of the line y = 4 with the y-axis and the origin, respectively.

Now, consider the curve y = r². To sketch this curve, start from the origin and plot points such as (1, 1), (2, 4), (3, 9), and so on. The curve will be a parabolic shape that opens upward.

Connect the plotted points on the curve to create a smooth curve that represents the equation y = r².

The region R is the area between the y-axis, the line y = 4, and the curve y = r². Shade this region to indicate it.

Label the region as R.

Your sketch should show the y-axis, the line y = 4, the curve y = r², and the shaded region R in the first quadrant.

Note: The variable r represents a parameter in this case, so the specific shape of the curve may vary depending on the value of r.

Learn  more about coordinate axis here:

https://brainly.com/question/31605584

#SPJ11

Other Questions
according to the text, the central tenets of social media whether in the domestic or global marketplace, and transparency, engaging with the community to building a strong profitable organization, and _____________. (q16) On a bridge under construction, a metal cable of length 10 m and mass 200 kg is hanging vertically from the bridge. What is the work done in pulling the whole cable to the bridge? A water balloon is launched in the air from a height of 12 feet and reaches a maximum height of 37 feet after 1.25 seconds. Write an equation to represent the height h of the water balloon at time T seconds. Them, find the height of the balloon at 2 seconds. How can you access the Rename dialog box to change a tab name? a. Click Rename in the Edit menu. b. Select the tab name from the All Tabs list and then click OK. c. Right-click the tab name and then click Rename at the shortcut menu. d. Open the Tools dialog box and then click Rename at the shortcut menu. a cutting tool that has a thin arched blade set at right angles to the handle and is used chiefly for shaping wood called_____ A balloon is rising vertically above a level, straight road at a constant rate of 0.1 m/s. Just when the balloon is 23 m above the ground, a bicycle moving at a constant rate of 7 m/s passes under it. How fast is the distance s(t) between the bicycle and balloon increasing 3 s later? s(t) is increasing by m/s. (Type an integer or decimal rounded to three decimal places as needed.) y(t) s(t) 0 {t) this building block reveals a company's ability to generate future revenues and meet long-term obligations. write number ICT an algorithm which reads the from 2 to 7 display Correspon ding day of the week. Which graphic presentation of data displays its categories as rectangles of equal width with their height proportional to the frequency or percentage of the category. a. time series chart. b. proportion. c. cumulative frequency distribution. d. bar graph The Rule of 78s is used to calculate the _____ when an installment loan is paid off early.a. APRb. balance duec. prepayment penaltyd. basic cost of moneye. amount saved use the definition to find the first five nonzero terms of the taylor series generated by the function f(x)=7tan1x 24 about the point a=1. T/F most incarcerated juvenile offenders are held for status offenses describe six major trends in supply chain management and collaboration. True/false: Once an organism is assigned to a particular taxonomic hierarchy, it is permanent and cannot be revised. A production process at Kenneth Day Manufacturing is shown in Figure S7.9 (Links to an external site.). The drilling operation occurs separately from, and simultaneously with, sawing and sanding, which are independent and sequential operations. A product needs to go through only one of the three assembly operations (the operations are in parallel).a. Which operation is the bottleneck? [ Select ] ["Welding", "Assembly", "Sanding", "Sawing"]b. What is the bottleneck time? [ Select ] ["30", "85.71", "40", "10"] minutesc. What is the throughput time of the overall system? [ Select ] ["140.71", "135.71", "276.42", "155.89"] minutesd. If the firm operates 8 hours per day, 20 days per month, what is the monthly capacity of the manufacturing process? [ Select ] ["320", "300", "240", "333"] units What is the future value of $500 invested annually for 20 years at a 10% rate of return? extravascular hemolysis can be caused by all the following antibodies except: group of answer choices abo rh duffy kell qwuizlet Supppose that while edducating a few OM internss about simulation, an instructor at Boeing asks the interns to explain the term 'calibrate'. The answers given by the interns are listed below.Question: Select the answer that best explains the term calibrate.A. Calibration is the technical term for running the model.B. To calibrate a model is to have it approved by management and have it accepted as the official planning tool in the company.C. To calibrate a model is to change its workings so that it adequately reproduces known (observed) data.D. Calibration is the process of selecting model input values on the basis of random numbers. Find the volume of the solid when the region enclosed by y=x2, x = 1, x = 2, and y =0 is revolved about the y-axis. 15x 16 None of the Choices O 15 2 15 4 O 15% if you had a 50g of solute, and wanted to make a 5% by mass solution, how many grams of solution would you need?