Answers
The solution can still take an additional 30 grams of KCl before the solution becomes saturated.
What is solubility?The term solubility refers to the fact that a substance is able to dissolve in water. In fact we define the solubility of a substance as the amount of a substance that is able to dissolve in a given amount of a solvent.
Thus the solution is made when the solute is dissolved in a solvent. The solubility curve shows the impact of temperature on the solubility of a substance. For some substances, the solubility may even be increased as temperature increases and for some substances, the solubility is decreased as the temperature increases.
If we study the solubility curves, we can see that the solubility of KCl at 80 degrees Celsius is 50g/100gH2O. This implies that if we dissolve about 20 grams of the solid KCl in 100g of water at 80 degrees, the solution can still take an additional 30 grams of KCl before the solution becomes saturated.
Learn more about solubility curve:https://brainly.com/question/10207839
#SPJ1
Related Questions
Study the chemical reaction.
This formula shows a reaction between iron and oxygen.
What should the values of x and y be in order to balance
this reaction?
Answers
Answer:
B
Explanation:
left side has 3 Fe and 4 oxygen
Need help very fast on this hard question
A sample of baking soda contains 34.48 g of sodium, 1.51 g of hydrogen, 18.02 g of carbon, and 72.00 g of oxygen.
a. What is the total mass of the sample? ______________g
Remember the addition rule for sigfigs
b. What is the percent by mass of each element in baking soda? Remember the sigfig rule for division
Sodium ______________%
Hydrogen ______________%
Carbon ______________%
Oxygen ______________%
Follow sigfig rules for division; answers will be marked incorrect by the computer if you do not use the correct sigfigs in your final answer
Answers
Answer:
The total mass is "126.01"
The sodium is "0.2736"
The hydrogen is "1.20"
The carbon is "14.30"
The oxygen is "57.14"
- From my chemistry teacher, we did this in class
A sample of 0.2655 g of an unknown monoprotic acid was dissolved in 25.0 ml of water and titrated with 0.0950 mnaoh. the acid required 30.0 ml of base to reach the equivalence point.
Answers
The molar mass of the monoprotic acid is 93.16 g/mol.
Because the acid (HA) is monoprotic, it reacts with NaOH like this:
[tex]HA + NaOH[/tex] → [tex]NaA + H_{2}O[/tex]
The ratio in which HA and NaOH react is 1:1. This means that the amount of NaOH expended will be equal to the amount of acid in the sample.
c = n/V, so n = c x V = 0.0950 M x 0.0300 L = 0.00285 mol of NaOH and HA
From this, we can now calculate the molar mass of the acid.
n = m/M, so M = m/n = 0.2655 g / 0.00285 mol = 93.16 g/mol
You can learn more about monoprotic acids here:
brainly.com/question/18724098
#SPJ4
define uniform velocity, instantaneous velocity, uniform acceleration. show how, from the velocity time graph for a body
Answers
Answer:
The velocity at that particular instant is the instantaneous velocity. Uniform velocity is when the distance being covered is changing uniformly with time
Explanation:
What is the mass of an object when the triple beam balance reads 100.00 g, 20.00 g, 0.20 g, and 0.05 g?
Answers
How many moles of atoms are in 50 atoms Ba
Answers
moles of atoms in 50 atoms of barium are 301.15 × 10^23
We may determine how many chemicals or particles are included in one mole using Avogadro's number.Chemistry's fundamental building block is an atom. It is the smallest fraction of matter into which electrically charged particles cannot be released. It is also the smallest piece of substance with chemical element-like characteristics.A mole of any substance is equal to 6.023 x 10^23, or Avogadro's number. Additionally, it is employed to express concentrations in terms of moles per litre or molecular weight.The number of atoms in exactly 12 grammes of pure carbon-12 is the value of a mole.Chemical element barium has the chemical symbol Ba and atomic number 56. In group 2, it is the fifth element.1 mole of substance = 6.023 x 10^23
so in 50 atoms of Ba = 50 × 6.023 × 10^23
= 301.15 × 10^23
Therefore, moles in 50 atoms of Ba is 301.15 × 10^23.
Learn more about avagadro number here:
https://brainly.com/question/859564
#SPJ9
highlight all the atoms of the four functional groups by clicking on them. when you click on each atom, it will change color. to deselect an atom, click on it again. do not highlight any bonds.
Answers
H-S
PO4
O-H
NH2
A functional group is a group of atoms bonded together in a specific way that can replace a hydrogen atom in a hydrocarbon. The molecule shown here contains four functional groups (−OH−OH, −SH−SH, −NH2−NH2, and −OPO2−3−OPO32−) attached to a carbon chain that is six carbon atoms long.
In chemistry, what are the four functional groups?Alkanes, alkenes, alkynes, and arenes are the four distinct hydrocarbon functional groups.A functional group is a collection of atoms or bonds that define the function of the hydrocarbon to which they are attached. Alcohol, aldehyde, ketone, carboxylic acid, halogens, and double and triple covalent bonds are some examples.A functional group is a group of atoms in a molecule that have distinct chemical properties independent of the molecule's other atoms. Covalent bonds connect the atoms in a functional group to each other and to the rest of the molecule. Phosphate: The addition and release of phosphate groups to and from ADP and ATP is how cells store and expend chemical energy.
To learn more about four functional groups refer to
https://brainly.com/question/24419453
#SPJ4
The titration of 25. 00 ml of 0. 2215 m hcl required 28. 84 ml of naoh for neutralization. What is the molarity of naoh?
Answers
The molarity of the NaOH solution is 0.192 M.
The reaction between HCl and NaOH looks like this:
[tex]HCl + NaOH[/tex]→[tex]NaCl + H_{2} O[/tex]
So NaOH and HCl react in a 1:1 ratio, which means that the amount of HCl is equal to the amount of NaOH. We can calculate the amount of HCl using its volume and molarity:
c = n/V, so n = c * V = 0.2215 M * 0.025 L = 0.0055375 mol of HCl and NaOH
So now we can calculate the molarity using the volume of NaOH:
c = n/V = 0.0055375 mol / 0.02884 L = 0.192 M
You can learn more about molarity here:
brainly.com/question/22997914
#SPJ4
Those 2 Question say...
1. Which substance is the most soluble at 100°C
and at most at 0°C
PLEASE HELP
Answers
Answer:
Water,
Explanation:
Water is one of the best liquids. It has an effect that called van der Waals forces lets geckos stick to stuff, and it's essential for life.
Consider the model of a sodium atom. An orange circle labeled upper n a is surrounded by three concentric circles. The innermost ring has dots at the north and south positions. The next ring has eight dots, evenly spaced, with dots aligning with those in the inner ring. The outermost ring has one dot at the north position. Which feature does the model show accurately?.
Answers
Consider the model of a sodium atom. An orange circle labeled upper n a is surrounded by three concentric circles. The innermost ring has dots at the north and south positions. The next ring has eight dots, evenly spaced, with dots aligning with those in the inner ring. The outermost ring has one dot at the north position. The distribution of electrons in different shells feature does the model show accurately.
Using the atomic number of each element, we may depict its atomic structure. Therefore, you must first know the atomic number of sodium in order to depict its atomic structure.
The sodium atom has a number of 11. Any element's atomic number describes how many electrons are present in one of its atoms.
Always start your sentence with the element's atomic number. Knowing an object's atomic number also lets you know how many protons and electrons it contains. The number of protons and electrons is the same as it is in every stable atom. Consequently, you are also aware of the quantity of electrons.
Learn more about sodium atom:
https://brainly.com/question/25033306
#SPJ4
The complete question is ''Consider the model of a sodium atom. An orange circle labeled upper N a is surrounded by three concentric circles. The innermost ring has dots at the north and south positions. The next ring has eight dots, evenly spaced, with dots aligning with those in the inner ring. The outermost ring has one dot at the north position. Which feature does the model show accurately?
A) the size of the electrons in different shells
B) the shapes of the orbitals in different shells
C)the distribution of electrons in different shells
D)the orientation of the orbitals in different shells
Sodium phosphate reacts with sulfuric acid to form sodium sulfate and phosphoric acid. What is the stoichiometric coefficient for sulfuric acid when the chemical equation is balanced using the lowest whole-number stoichiometric coefficients?.
Answers
When sodium phosphate reacts with sulfuric acid, forming sodium sulfate and phosphoric acid, the stoichiometric coefficient for sulfuric acid in the balanced chemical equation is 3.
In every balanced chemical equation, the total number of individual atoms on the reactant side must be equal to the total number of individual atoms on the product side. The stoichiometric coefficient is the number written in front of each reactants and products that tells how many moles of each are needed in the reaction.
The chemical equation for the given reaction is:
[tex]Na_{3} PO_{4}[/tex] + [tex]H_{2} SO_{4}[/tex] = [tex]Na_{2} SO_{4}[/tex] + [tex]H_{3} PO_{4}[/tex]
Put the necessary stoichiometric coefficient to balance each element.
Balancing Na:
[tex]2Na_{3} PO_{4}[/tex] + [tex]H_{2} SO_{4}[/tex] = [tex]3Na_{2} SO_{4}[/tex] + [tex]H_{3} PO_{4}[/tex]
Balancing P:
[tex]2Na_{3} PO_{4}[/tex] + [tex]H_{2} SO_{4}[/tex] = [tex]3Na_{2} SO_{4}[/tex] + [tex]2H_{3} PO_{4}[/tex]
Balancing S:
[tex]2Na_{3} PO_{4}[/tex] + [tex]3H_{2} SO_{4}[/tex] = [tex]3Na_{2} SO_{4}[/tex] + [tex]2H_{3} PO_{4}[/tex]
Notice that H and O are already balanced.
Hence, the balanced chemical equation for the reaction is:
[tex]2Na_{3} PO_{4}[/tex] + [tex]3H_{2} SO_{4}[/tex] = [tex]3Na_{2} SO_{4}[/tex] + [tex]2H_{3} PO_{4}[/tex]
where 3 is the stoichiometric coefficient of sulfuric acid, [tex]H_{2} SO_{4}[/tex].
Learn more about stoichiometric coefficient here: https://brainly.com/question/6666875
#SPJ4
the reaction of cr2o3 with silicon metal at high temperatures will make chromium metal. $$ the reaction is begun with 74.00 g of si and 116.00 g of cr2o3.
Answers
The limiting reactant is Cr₂O₃ and the left mass of the excess reactant after the reaction is complete is 41.847 grams.
Solution:The balanced chemical equation for the reaction is:
2Cr₂O₃(s) + 3 Si(s) → 4Cr(l) + 3SiO₂(s)
Moles of Si = Mass Si / Molar mass Si
= 74 g / 28.0855 g/mol
= 2.634 mol
Moles of Cr₂O₃ = Mass Cr₂O₃ / Molar Mass Cr₂O₃
= 116 g / 151.99 g/mol
= 0.763 mol
Since Cr₂O₃ is in a lesser amount, so it is the limiting reactant and hence the excess reactant is Si.
The amount of Si used to reactant with limiting reactant is:
= 116.00 g of Cr₂O₃ ×( 1 mol of Cr₂O₃/ 151.99 g of Cr₂O₃)× (3 mol Si / 2 mol Cr₂O₃) × ( 28.0855 g Si / 1 mol Si)
= 32.153 g Si
Amount of excess reactant(Si) left = 74.00 g - 32.153 g = 41.847 g
So, after the reaction is completed, 41.847 g of excess reactant(Si) is left.
What is a limiting reactant?Another name for a limiting reagent is a limiting reactant. The reactant having the lowest mole for one molecule is known as a limiting reactant or limiting reagent. When the reaction will end is determined by a limiting reactant. It is basically the reactant that is consumed first in a chemical reaction, which limits the amount of product that can be produced. The mole ratios from the balanced chemical equation are used in each of the numerous methods for identifying the limiting reactant.
To know more about limiting reactant visit:
https://brainly.com/question/14225536
#SPJ4
The full question is :
"The reaction of Cr₂O₃ with silicon metal at high temperatures will make chromium metal.
2Cr₂O₃(s) + 3 Si(s) → 4Cr(l) + 3SiO₂(s)
The reaction is begun with 74.00 grams of Si and 116.00 grams of Cr₂O₃. What is the limiting reactant? How many grams of the excess reactant is left after the reaction is complete? "
A quasi-equilibrium process is a process during which a system never remains in equilibrium at all times.
a. true
b. false
Answers
I need help with this chemistry question.
If the percent by mass of carbon in sucrose is 42.2%, then how many grams of carbon are in a 30.0 g sample of sucrose?
_______________ g
Use the correct sigfigs in your answer or the computer will mark it incorrect
Answers
Answer:
12.66g
Explanation:
42.2% of 30.0g
=42.2/100 * 30.0
=0.422*30.0
12.66g
The hydrogen ion concentration of a vinegar solution is 0.00010 m. how is this concentration written in scientific notation? 1.0 times. 10â€""5 m 1.0 times. 10â€""4 m 1.0 times. 104 m 1.0 times. 105 m
Answers
1.0 ×[tex]10^{-4}[/tex] this is the concentration scientific notation.
What is the significance of scientific notation?The main reason for converting numbers to scientific notation is to make calculations involving unusually large or small numbers easier. Because zeros are no longer used to set the decimal point, all digits in a scientific notation number are significant, as demonstrated by the examples below.The primary reason for the importance of scientific notation is that it allows us to convert very large or very small numbers into much more manageable sizes. It is much easier to work with these numbers when they are written in scientific notation.In this problem, there are two significant figures. The final answer should also have two significant figures.
All scientific notation should have a non-zero number, followed by a decimal point to it's right, followed by remaining significant figures after that. The first non-zero number is 1, so the decimal point should follow the 1.
Moving the decimal to the right decreases the power of ten. The current number can be expressed as
0.00010×[tex]10^{0}[/tex]
00.0010×[tex]10^{-1}[/tex]
000.010×[tex]10^{-2}[/tex]
0000.10×[tex]10^{-3}[/tex]
00001.0×[tex]10^{-4}[/tex]
You can write the final answer by ignoring the initial zeros
1.0×[tex]10^{-4}[/tex]
To learn more about concentration written in scientific notation refer to
https://brainly.com/question/26117248
#SPJ4
Exclusive of compounds with double bonds, four hydrocarbons are constitutional isomers of cis− and trans−1,2−dimethylcyclopropane. Select the names of these four compounds
Answers
The names of these constitutional isomers are cyclopentane, methylcyclobutane, ethylcyclopropane, and 1,1-dimethylcyclopropane.
Constitutional isomers have the same molecular formula. This means that they have the same number of carbon and hydrogen atoms, with a general formula of:
[tex]C_{5} H_{12}[/tex]
When we consider the possible structures, the first option is cyclopentane, the simplest five-membered ring. When we reduce the ring to four carbons, we have the methylcyclobutane and when we reduce it to three carbons, we can arrange the other two carbons in an ethyl group or we can put two methyl groups on a single carbon atom to get the final two constitutional isomers.
You can learn more about constitutional isomers here:
brainly.com/question/9972986
#SPJ4
In the 1800s, one of the statements in john dalton's atomic theory was that atoms are indivisible. later experimental evidence led to the discovery of subatomic particles such as neutrons, electrons, and protons. what happened to the indivisible atom part of dalton's atomic theory, and why? the entire theory was discarded because dalton's scientific reputation was ruined once new evidence invalidated part of his theory. the indivisible atom part of the theory was discarded because consensus of data must exist for theories to be valid. the theory remained unchanged because dalton was correct regarding all other statements within the accepted scientific theory. the theory remained unchanged because new data is discarded if it doesn't fit within the accepted theory.
Answers
In 1800s, the john Dalton's atomic theory was that atoms are indivisible. later on , The indivisible atom part of the theory was discarded because consensus of data must exist for theories to be valid.
The Dalton's theory has some postulate which states that :
1) The atoms are the smallest form of matter and are the indivisible.
2) Each atom of same element have same and different atoms must be different types of element.
3) Atoms can not be created nor be destroyed but can be mix match.
4) Compound form from different elements combine in specific ratio.
now, the first postulate , has already been proving wrong by experiments like Rutherford's gold foil experiment and Thomson's discovery of electron.
Science is based on experiments and testings. in case of Dalton's atomic theory . it was not completely wrong but the only part that atom is indivisible was wrong.
therefore only this part was discarded that : The indivisible atom part of the theory was discarded because consensus of data must exist for theories to be valid.
To learn more about Dalton's atomic theory here
https://brainly.com/question/16892481
#SPJ4
(HELP!) This is a conversion problem (listed in the photo below) that needs work shown. I figured out the correct overall answer, but I'm pretty sure I used calculations that you are not supposed to use when solving it professionally.
Answers
The using conversion factor the time it takes the slug to run a marathon of 26.2 miles is 148 days
What is conversion factor?Conversion factor is a ratio or factor usaed to convert from one physical units to the other.
How long will it take a slug to run a marathon 26.2 miles?The time it takes the slug to run the marathon is t = d/v where
d = distance and v = speed of slugGiven that
d = 26.2 miles and v = 0.0229 mm/s,Using conversion factor from the table, we convert the distance to mm.
So, d = 26.2 miles
= 26.2 mile × 5280 ft/1 mile × 1 in/12 ft × 2.54 cm/1 in
= 351373.44/12 cm
= 29281.12 cm
= 29281.12 cm × 10 mm/1cm
= 292811.2 mm
So, the time t = d/v
= 292811.2 mm/0.0229 mm/s
= 12786515.2838 s
We now use conversion factor from the table to convert this time to days
t = 12786515.2838 s × 1 min/60 s × 1 h/60 min × 1 day/24 hours = 12786515.2838 s × 1 day/86400 s
= 147.99 days
≅ 148 days
So, using conversion factor the time it takes the slug to run a marathon of 26.2 miles is 148 days
Learn more about conversion factor here:
https://brainly.com/question/24545553
#SPJ1
12. which property of a mixture could be used to tell the difference between a
container of salt water and a container of distilled water?
a. a mixture is not uniform.
b. a mixture contains more than one identifiable particle.
c. a mixture looks different than the pure substances from which it is made.
d. a mixture has different melting and boiling points than the pure substances
from which it is made.
Answers
Option (d) a mixture has different melting and boiling points than the pure substances from which it is made.
This property of a mixture can be used to tell the difference between a container of salt water and a container of distilled water as the two given mixtures are homogeneous mixture as they have a uniform composition throughout the substance.
The properties of the mixture i.e. the melting point and boiling point of a mixture vary depending on the particles present in it.The particles of the pure substances in a homogeneous mixture can't get separated due to their small size.The resultant of mixing two pure substances giving a new product without inseparable pure substance is termed as Solution.Therefore the given two mixtures are solution and hence they have different melting and boiling points than the pure substances from which they are made of.
To know more about homogeneous mixture,
https://brainly.com/question/22974648
#SPJ4
a substance known as aerogel has one of the lowest known densities of any solid. around 2004, nasa used aerogel to obtain interstellar dust from the tail of a comet. how many pounds of aerogel are in a cubic foot? the density of aerogel is 3.0 mg/cm^3. do not enter "pounds" as part of your answer.
Answers
0.19 pounds of aerogel are in a one cubic foot.
Aerogels are a class of synthetic porous ultralight material derived from a gel, in which the liquid component for the gel has been replaced with a gas, without significant collapse of the gel structure.
Here a substance known as aerogel has one of the lowest known densities of any solid. around 2004
So, density=mass/volume
Volume = 1 cubic foot 1 cubic foot = 28316.8 cubic
Density is given 3.0 mg/cm³, volume = 1×10⁻⁶
Mass= 0.16miligram mass in cubic meter is 160 gm
0.19 pounds of aerogel are in a one cubic foot.
Know more about aerogel
https://brainly.com/question/28608762
#SPJ1
19. When are ionic bonds formed.
When electrons are transferred between two atoms.
O When covalent compounds are melted.
When electrons are shared between two atoms.
When ionic compounds are melted.
Answers
Answer:
when electrons are shared between two atoms
Explanation:
Ionic bonding is when two elements gain and lose electrons and protons until their last shell is full
check my answers! please hurry ive been working on this test for over 2 hrs lol
Question 1: The periodic table is arranged by various patterns. Is there a pattern with regard to ionic charge? In three to five sentences, explain your reasoning and provide specific examples.
Question 1 Answer: Negative ions increase in magnitude from right to left, whereas positive ions increase in magnitude from left to right. This is due to the fact that the left side of the periodic tale contains metals whereas the right side does not. As negative-charged electrons are always produced by metals, the element will become more positive when they are lost.
Question 2: Moving from the element with atomic number 10 to atomic number 11 on the periodic table, there is a change in reactivity. In three to five sentences, identify the direction of the change, and give two reasons for the change.
Question 2 Answer: The atomic number of sodium is 11, while neon is 10. Since neon has an outer shell made entirely of electrons, it doesn't interact with the other elements. The extra electron in sodium is located in the outer shell and there is one extra proton as well. By either losing one electron or gaining seven more, it might fill that shell. Since it will start losing that electron, sodium is a much more reactive element then neon.
Answers
Positive ions grow in magnitude from left to right, while negative ions grow in magnitude from right to left.
What are ions?Any atom or collection of atoms with one or more positive or negative electrical charges is known as an ion.
The periodic table shows that there are more valence electrons on the right than the left. The maximum amount of ionic charge that an element can hold fluctuates as the number of valence electrons rises.
Second, metals on the periodic table's left side primarily produce positively charged ions. These ions get stronger over time, increasing in size.
The negative charges on the ions that non metals on the right side of the periodic table produce have a diminishing magnitude over time.
To learn more about ions, refer to the below link:
https://brainly.com/question/13327807
# SPJ1
Testing for pH levels can be useful in a variety of ways. Healthcare professionals may use pH tests on saliva or urine samples to help diagnose disorders. pH tests are also performed in the home on water samples from, for example, swimming pools.
3. pH strips measure the number of
__ in a solution.
Answer choices:
ions
charges
protons
Answers
Therefore pH measure the number of ions
Scientists have been concerned about a set of industrial chemicals called cfc's (chlorofluorocarbons) because they:____.
Answers
Scientists have been concerned about a set of industrial chemicals called CFCs (chlorofluorocarbons) because they are harmful to the environment by altering the ozone layer that covers the atmosphere.
What is the ozone layer?The ozone layer is a very tiny layer present in the atmosphere that contains O3 molecules, which serve to absorb the radiation of UV rays, and this layer can be damaged by CFCs.
In conclusion, scientists have been concerned about a set of industrial chemicals called CFCs (chlorofluorocarbons) because they are harmful to the environment by altering the ozone layer that covers the atmosphere.
Learn more about the ozone layer here:
https://brainly.com/question/7340574
#SPJ1
4 a Write a word equation for the reaction of lithium with
water.
b The pH of the water changes. Why?
Answers
The word equation for the reaction of lithium with water is:
Lithium + Water → Lithium hydroxide + Hydrogen
The pH of water changes due to the solution being basic because of the dissolved hydroxide.
Due to its lower density than water, lithium floats on the surface while fizzing and emitting hydrogen gas. It gradually transforms into a colorless solution of lithium hydroxide and disintegrates.
In this reaction, 2 moles of Li react with 2 moles of water to form 2 moles of LiOH and 1 mole of hydrogen gas.
Therefore, the correct equation is
2Li + 2H₂O→ 2LiOH + H₂
As, before the pH of water is nearly neutral but with the formation of lithium hydroxide which is a strong base the pH changes to basic.
To learn more about lithium visit the link:
https://brainly.com/question/14367168?referrer=searchResults
#SPJ9
Describe what the whole number is called that comes before a compound and what its purpose is.
Answers
The whole number that comes before a compound is called a coefficient and it is used to balance the compound in a chemical equation.
What is a chemical compound?Chemical compounds is defined as those substances which are made up of two or more elements that are chemically combined together.
The combination of two compounds that reacts are called the reactants while the compounds that are formed are called the products.
The reaction that leads to the formation of products needs to be balanced using whole numbers in front of the chemical compounds.
For example,
[tex]H_{2}[/tex] +[tex]O_{2}[/tex] --->[tex]H_{2} O[/tex]
To balance the above equation, the whole number 2 is inserted infront of hydrogen and the water molecule that is formed. That is,
[tex]2H_{2} +O_{2} --- > 2H_{2} O[/tex]
Therefore, the whole number that comes before a compound is called a coefficient and it is used to balance the compound in a chemical equation.
Learn more about chemical compound here:
https://brainly.com/question/26487468
#SPJ1
When a substance reacts chemically to create a new substance, will that new substance have the same physical and chemical properties as the initial substance? Explain your answer.
Answers
When a substance reacts chemically to form a new substance, that new substance will have different physical and chemical properties from the starting substance.
When a chemical change occurs, atoms in substances are recombined to form a new substance. This recombination of atoms creates new substances.
The new substances have a different composition than the composition of the first one.
Since the chemical and physical properties of a substance depend on how atoms are combined in a substance when this combination of atoms changes, the physical and chemical properties of the new substance also vary from those of the starting substance.
Therefore, when a substance reacts chemically to create a new substance, that new substance will have different physical and chemical properties from that of the initial one.
To learn about physical and chemical properties, visit: https://brainly.com/question/11321843
#SPJ9
Which quantity expresses the sum of 22.1 g + 375.66 g + 5400.132 g to the correct number of
significant figures?
1) 5800 g
2) 5798 g
3) 5797.9 g
4) 5797.892 g
Answers
The quantity that expresses the sum of the given parameters is =5797.9g. That is option 3.
Calculation of the give figureSummation is the addition of figures to achieve a significant figure.
Significant figures on the other hand is the representation of digits in numbers that are reliable and accurate.
The given figures include the following:
= 22.1 g + 375.66 g + 5400.132 g
= 5797.892
= 5797.9g
5797.9g is the correct significant figure because the digit at the second decimal place is greater than five which is counted as one and is added to the next figure making it up to 9.
Therefore, the quantity that expresses the sum of the given parameters is =5797.9 g .
Learn more about significant figures here:
https://brainly.com/question/24491627
#SPJ1
step 3 of this protocol describes using a minimal amount of boiling solvent to dissolve your impure solid. why is it important to use only a minimal amount of solvent?
Answers
Using a minimum amount of solvent is important because it minimizes the amount of material lost by retention.
Why must only a small amount of the required solvent be used for recrystallization?
In order to support the objective of recovering the greatest possible amount of crystals, the amount of solvent used during crystallization is typically kept to a minimum.
Since heat can push some solids over the edge and completely dissolve them, crystallization occurs most frequently in solids with moderate solubility at low temperatures. Accordingly, in practice, a certain amount of the compound will dissolve in the mother liquor at low temperatures. Depending on the solubility profile of the compound, this amount may be significant. Utilizing the least amount of hot solvent possible reduces the amount of compound lost to the mother liquor.
To know more about the solvent properties , visit the given link:
https://brainly.com/question/13615656
#SPJ4
PLease help love it to be over 9th answering please and thank you!!!
Answers
Answer:
search from website please