help please I don’t understand and this is due tomorrow.

Answer:

below

Explanation:

- peanuts and almonds mixed

together in a bowl heterogeneous

- a bucket full of sand and gravel

heterogeneous

- a cup of tea and sugar homogeneous

- food coloring dissolved in water homogeneous

Triads of elements with similar properties are : Strontium, Calcium, and Barium.

Dobereiner organized elements according to atomic mass.

He organized them by adding of first and third number of element's atomic mass and their average would be nearly the same as the atomic mass of the second one.

Triads are known as the three elements group, which were are given by the scientists to understand the concept of the arrangement of the elements better on the basis of their masses.

On the basis of this triad, Dobereiner introduced three triads. He added the atomic mass of first and third element and their average would be same or nearly the same as the atomic mass of the second one.

It is helpful to understand the numbering of elements better. But this system has some major drawbacks due to which, it is not followed by anyone today.

This makes modern periodic table a good option to understand about the elements better.

Therefore, the three triads of Dobereiner which were introduced by him are Strontium, Calcium, and Barium.

To learn more about Dobereiner triads,

brainly.com/question/11741731

#SPJ4

Answer:

Force Is a Vector Quantity that measures both direction and magnitude of a push or pull on an object.

Explanation:

The formula for Force= Mass × Acceleration. And when applying force, there is a direction at which the body is focused on. Hope this helps

Answer:

(Question 1) Which statement best describes force?

(Answer) Force is a vector quantity that measures both direction and magnitude of a push or pull on an object.

(Question 2) A soccer ball is traveling downfield with a force of 1.2 kN and strikes another soccer ball that is stationary. Which of the following describes the result of the collision?

(Answer) The stationary soccer ball will begin moving downfield and the ball that struck it will slow down.

(Question 3) Which of the following scenarios accurately describes magnitude and direction?

(Answer) A car traveling northward with 5 kN of force could be brought to a stop by a southward force of 5 kN.

(Question 4) What is force directly proportional to?

(Answer) the acceleration and mass of an object

(Question 5) Two ropes are being used to suspend a box. Each rope is exerting 5 N of upward force. If the forces are balanced and the box is stationary, how much force is being exerted by the box itself and in which direction?

(Answer) The box exerts 10 N of force downward.

Explanation:

just did the Quick Check UwU Enjoy

Answer:

It is Diffusion

The properties of matter which can be used to classify it include the following:

This is referred to as any substance which has mass and occupies space thereby meaning that it has a volume.

Matter can be classified into three forms which are:

Matter has physical properties such as shape in which a solid has a definite shape while gas and liquid doesn't due to the distance of their molecules. On the other hand chemical properties such as reactivity also determines the classification as gas is known to be more reactive while solids are least reactive.

Read more about Matter here https://brainly.com/question/3998772

#SPJ1

Courtship behaviours usually happen in response to seasonal changes to ensure that mating does not interfere with migration season. So the correct option is A.

Animals engage in courting behaviour, which leads to mating and eventual reproduction. Depending on the quantity of chemical, optical, or aural inputs involved, courtship can be quite basic or extremely complicated, comprising a variety of activities performed by two or more people.

To entice a partner, many species turn to courtship feeding. Some insect species' females employ odorous compounds known as pheromones to draw males in close proximity, like the spongy moth Lymantria dispar. On spring nights, much of the world can hear the courting choruses of frogs of the Rana species and the touching courtship rituals of male painted turtles, Chrysemys species.

Therefore the correct option is A.

Read more about courtship behaviours, here

https://brainly.com/question/14083774

#SPJ1

Answer: Chloride and Chromate ions

Explanation:

Two anions used in this lab to perform selective precipitation of the unknowns are chloride and chromate ions.

Anions such as  Cl− ,  Br− ,  SO2−4 ,  CO2−3 ,  S2− ,  Cr2O2−4 ,  PO2−4 ,  OH−  etc., forms a mixture of metal ions in a solution which can be separated by precipitation. If a metal ion or a group of metal ions forms insoluble salts with a particular anion, then they can be separated from others by the precipitation.

Anions can also be separated by the precipitation with appropriate metal ions. There are no separation lines between insoluble salts, sparingly soluble, and soluble salts, but their concentrations of saturated solutions are small, medium, and large. For insoluble and sparingly soluble salts, solubility products are usually listed. But for soluble salts they are not given.

Solubility products for soluble salts are very large.

To learn more about precipitation,

brainly.com/question/28384354

#SPJ4

Answer:

Calcite

Explanation:

When sodium phosphate reacts with sulfuric acid, forming sodium sulfate and phosphoric acid, the stoichiometric coefficient for sulfuric acid in the balanced chemical equation is 3.

In every balanced chemical equation, the total number of individual atoms on the reactant side must be equal to the total number of individual atoms on the product side. The stoichiometric coefficient is the number written in front of each reactants and products that tells how many moles of each are needed in the reaction.

The chemical equation for the given reaction is:

[tex]Na_{3} PO_{4}[/tex] + [tex]H_{2} SO_{4}[/tex] = [tex]Na_{2} SO_{4}[/tex] + [tex]H_{3} PO_{4}[/tex]

Put the necessary stoichiometric coefficient to balance each element.

Balancing Na:

[tex]2Na_{3} PO_{4}[/tex] + [tex]H_{2} SO_{4}[/tex] = [tex]3Na_{2} SO_{4}[/tex] + [tex]H_{3} PO_{4}[/tex]

Balancing P:

[tex]2Na_{3} PO_{4}[/tex] + [tex]H_{2} SO_{4}[/tex] = [tex]3Na_{2} SO_{4}[/tex] + [tex]2H_{3} PO_{4}[/tex]

Balancing S:

[tex]2Na_{3} PO_{4}[/tex] + [tex]3H_{2} SO_{4}[/tex] = [tex]3Na_{2} SO_{4}[/tex] + [tex]2H_{3} PO_{4}[/tex]

Notice that H and O are already balanced.

Hence, the balanced chemical equation for the reaction is:

[tex]2Na_{3} PO_{4}[/tex] + [tex]3H_{2} SO_{4}[/tex] = [tex]3Na_{2} SO_{4}[/tex] + [tex]2H_{3} PO_{4}[/tex]

where 3 is the stoichiometric coefficient of sulfuric acid, [tex]H_{2} SO_{4}[/tex].

Learn more about stoichiometric coefficient here: https://brainly.com/question/6666875

#SPJ4

The correct pairing of the elements based on the nature of chemical bonds formed is:

Chemical bonds are bond which are formed between atoms of the same element or different elements by a transfer of a sharing of electrons.

There are two main types of chemical bonds:

Ionic bonds results in the formation of oppositely-charged ions as electrons are transferred from one atom to another.

Example of ionic bonds are the chemical bonds formed between sodium and fluorine to form sodium fluoride, and the chemical bond formed between calcium and oxygen to form calcium oxide.

Covalent bonds are formed when atoms of the same or different elements share electrons between them.

Examples of covalent bonds are the chemical bonds formed between Boron and Nitrogen to form boron nitride.

Learn more about chemical bonds at: https://brainly.com/question/819068

#SPJ1

The correct statement is the particles are more orderly in region 1, which is the solid state. The other statements are false.

Since, the region 1 is solid state, region 2 is liquid state and the region 3 is gaseous state, particles are more orderly in region 1.

In solid, the particles are closely packed together. They are not free to move within a substance. The particles in solid are in a regular pattern or arrangement making the particles of substance more orderly.

In liquid, particles are close together but they are not in a regular arrangement or pattern, and in gases, the particles of substance are well separated, i.e. not closely packed with no regular arrangement.

So, particles are more orderly in region 1.

To learn more about solid state,

brainly.com/question/1955461

#SPJ4

Correct question is :

Which best compares the particles of the substance when it is in region 1 with the particles of the substance when it is in region 3? The particles are slower in region 3. The particles are more orderly in region 1. The particles have more kinetic energy in region 1. The particles have less freedom of motion in region 3.

Glucose molecules bond together in a process known as dehydration synthesis. In this process, a water molecule is formed from the hydrogen and oxygen atoms removed.

The process of chemical reaction in which water is lost is named as dehydration process. During the process of formation of the larger molecules from the smaller monomers, a water molecule is released. It is the dehydration synthesis.

The glucose monomers are bonded together and with each bond, in the synthesis process. The water molecule is lost in this process. Polymers are formed, such as starch, and cellulose, from the monomers of glucose.

Polymers such as DNA, proteins, and carbohydrate, are formed through the process of dehydration synthesis.

Therefore, the correct point explaining the process of dehydration synthesis is that a water molecule is formed from the hydrogen and oxygen atoms removed.

To learn more about dehydration synthesis,

brainly.com/question/27998227

#SPJ4

Answer:

5791

Explanation:

Easy peasy lemon squeazy

Answer:

element: Beryllium

protons are: positive

electrons are: negative

charge on this atom: 2+

Explanation:

Rutherford conducted a famous experiment called the gold foil experiment.

He took a skinny sheet of gold foil. He used a special gadget to shoot alpha particles undoubtedly charged debris on the gold foil. most debris passed straight thru the foil like the foil was now not there. They bombarded very skinny sheets of gold foil with fast-shifting alpha debris. Rutherford found that a small percent of alpha debris had been deflected at massive angles, which could be explained by using an atom with a very small, dense, definitely-charged nucleus at its middle.

Rutherford designed an experiment to apply the alpha particles emitted via a radioactive element as probes to the unseen global atomic structure. If Thomson changed into correct, the beam might move immediately through the gold foil. most of the beams went via the foil, however, some have been deflected. Ernest Rutherford postulated the nuclear structure of the atom, determined alpha and beta rays, and proposed legal guidelines for radioactive decay. In 1911, Rutherford, Marsden, and Geiger determined the dense atomic nucleus by bombarding a thin gold sheet with the alpha particles emitted through radium.

Learn more about Rutherford's experiment here:-https://brainly.com/question/14996029

#SPJ9

Answer:

Substance

Explanation:

Substances that do not readily dissolve in water can be described as hydrophobic substances. Hydrophobic substances are those which when exposed.

Answer:

The organism is unicelluar

Explanation:

The organism is unicelluar because we weren't told The type of Microscope the biologist made Use of .

We've to find it inadequately weight thing at the admitted election if we know it carries the kinetic energy. Now we've to figure out the relationship between the very post in order to set up our equation. So we know we are looking for the weight length and we've been handed with the kinetic energy.

Now we know that Connect energy has a relationship with the haste. If we are going to rearrange the question then we've two times kinetic energy equals to mass haste forecourt or haste forecourt. You close to two times collected energy that bothered by the mass were haste because the square root of two times connected energy over the mass Right then. Now we've a relationship. They'd kinetic energy on the haste as well.

And now we just have to associate a haste with the wavelength can do this. It's close to cranks constant divided by the instigation we know Constant has a number of 6.63 times 10 to the power of native 34. rather of jewels per second, we are going to use kilograms either square per second, because on the weight of the electron then, which is9.1 times 10 to the power negative 31 we also have a kilogram. So we've to have a kilogram over there to cancel it now onto the haste. It's going to be a big bone , no, two times the kinetic energy, which is five or six. So we've to do a conversion of ev to 1.602 times 10 to the power of negative 19 augar developed by the mass again, which is9.1 times 10 to the power of -0.545 is the final answer.

To know more about Augar electron spectroscopy here :

https://brainly.com/question/24230107?referrer=searchResults

#SPJ4

Answer:

A because its A

Answer:

A is 5.67 x 10x10x10 B is 0.567 x 10x10x10x10

According to bond energy, the maximum wavelength of light is 475 nanometers.

We need to know about bond energy to solve this problem. Bond energy is the energy needed to bond other atoms in the molecule. To determine the energy in one molecule of chlorine monofluoride, we can use this formula:

E = BE / Na

where E is the energy of photon, BE is bond energy and Na is Avogadro's number (6.02 x 10²³ atoms/mol)

Now, we can calculate the shortest wavelength by using Einstein's equation for photon energy:

E = h . c / λ

where h is Planck constant (6.6 x 10¯³⁴ J.s), c is the speed of light (3 x 10⁸ m/s) and λ is the wavelength.

From the question above, we know that

BE = 251 kJ/mol = 251 x 10³ J/mol

By substituting the given parameters, we can calculate the maximum wavelength

E = BE / Na

h . c / λ = 251 x 10³ / 6.02 x 10²³

6.6 x 10¯³⁴ . 3 x 10⁸ / λ = 251 x 10³ / 6.02 x 10²³

λ = 4.75 x 10¯⁷ m

λ = 475 nm

Find more on bond energy at: https://brainly.com/question/14593563

#SPJ4

If there are the three different compounds present in three test tubes with approximately same melting points.

Melting point, temperature at which the solid and the liquid forms of a pure substance can exist in equilibrium. As heat is applied to a solid, its temperature will increase until melting point is reached. More heat then will convert solid into a liquid with no temperature change.

When all solid has melted, the additional heat will raise the temperature of the liquid. The melting temperature of crystalline solids is a characteristic figure and is used to identify the pure compounds and elements. Most mixtures and amorphous solids melt over a range of the temperatures.

The melting temperature of a solid is generally considered to be same as the freezing point of the corresponding liquid; because a liquid may freeze in different crystal systems and because the impurities lower the freezing point, however, the actual freezing point may not be the same as the melting point. Thus for characterizing a substance, melting point is preferred. See also melting.

If there are the three different compounds present in three test tubes with approximately same melting points. Firstly, if the melting point of each sample has been recorded thrice. It will result small difference in the readings. along with this is not necessary that three compounds with nearly same melting point have same solubility. The three components can be identified as different from their solubility in the various solvents.

To know more about solid visit: https://brainly.com/question/17061172

#SPJ4

Answer:

Titanium oxide.

Explanation:

Answer:

Explanation:

Physical Property

Explanation:

Hardness is the physical property

Answer:

115km is equal to 11500000cm

Explanation:

The balance chemical reaction or equation for the given question is :

2Rb (Rubidium) (s) + 2H₂O (Water) (l) → H₂ (Hydrogen) (g) + 2RbOH (Rubidium Oxide) (l)

Rubidium (Rb) is an alkali metal in the similar group (Group I) as sodium (Na) and as one goes down the periodic table of group the ionization energy decreases (downfall).Hence Rubidium (Rb) also reacts with water goes to the creation of hydrogen gas. Its reaction with water (H2O)  is same to that of sodium (Na).

To Balance a Chemical Equation we need to mention the algebraic terms both the sides.

Balancing a Chemical Equation is related to law of conservation of mass.

To Balance a Chemical Equation , place portions as demanded in front of the symbols of formulas so the same number of each type of snippet occurs in both reactants and products.

To know more about Balance Chemical Equation here :

https://brainly.com/question/28294176?referrer=searchResults

#SPJ4

Answer:

coz it doesn't meet the three criteria the iau uses to define a full sized planet

Explanation:

it meet all other except one :has no cleared its neighboring region of other object

Answer:

Be3N2

Explanation:

The valancy of beryllium is 2 and Nitrogen is 3 and from criss-cross method

Be. N. ( name of elements)

2. 3. ( their valancy)

The difference in lattice energies between MgCl2 and CaCl2 is 269 kJ.

2.    lattice disassociation enthalpy of magnesium oxide is greater than that  of magnesium chloride.

because magnesium chloride consist of 3 ions in total , whereas magnesium oxide has 2 ions and oxide ions are smaller than chloride ions, Which  means that the ions are closer together in the lattice of magnesium oxide than magnesium chloride , and which also increases the strength of the attractions.

learn more about lattice enthalpy of compounds here-

https://brainly.com/question/20814973

#SPJ9

Converting gigabytes(GB) to bytes, there are 1.6 x 10^11 bytes of disk space in the computer lab.

If there are 8 computers in the computer lab that each have 20 GB hard drives, then multiplying 8 by 20 will give the total disk space in GB.

total disk space = 8 x 20GB

total disk space = = 160GB

Conversion is the process of changing the value of one form or unit to another. It can be changing ones unit of length, weight, volume or even currency to another.

A conversion factor is a number used to change one set of units to another, either by multiplying or dividing.

If 1 gigabyte (GB) is equal to 1 x 10^9 bytes, then multiply 1 x 10^9 to the total disk space,

total disk space = 160GB

1 gigabyte (GB) = 1 x 10^9 bytes

total disk space = 160(1 x 10^9) bytes

total disk space = 1.6 x 10^11 bytes

To learn more about conversion: brainly.com/question/97386

#SPJ4

The scientist who came up with the first widely recognized atomic theory is John Dalton.

The first thorough effort to categorize all matter in terms of atoms and their characteristics was Dalton's atomic theory.

Dalton based his hypothesis on the laws of mass conservation and constant composition. It has the following aspects:

To learn more about Dalton's atomic theory, visit the link:

brainly.com/question/13157325

#SPJ4