How many atoms are in 4.3 moles of lithium?

Answer:

Cell theory states that cell living organisms are composed of at least one cell, which are the basic unit of life. Cells are always produced from other living cells, and cannot spontaneously generate

Answer:

both parents traits and genes

Answer:

drought

Explanation:

because it looses all of the water in the aria / desertification

The order of the solutions from lowest to highest concentration : A, B, C

Given

the following solutions

Required

order of increasing  concentration

Solution

Molarity shows the number of moles of solute in every 1 liter of solution.

[tex]\large{\boxed {\bold {M ~ = ~ \frac {n} {V}}}[/tex]

Solution A : 0.5 moles : 2 L solution = 0.25 M

Solution B : 1 moles : 3 L solution = 0.33 M

Solution C : 1.5 moles : 4 L solution = 0.375 M

It measure the number of elementary entities of a given substance that are present in a given sample. 1.99 moles of glucose are present in 1.2 x 10²⁴  molecules.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity of amount of substance. The stoichiometry represents the number of moles. Mole is directly proportional to the number of given molecules.

Given number of atoms= 3.01x10²³atoms

we know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

mole of glucose =given number of molecules of glucose ÷ 6.022×10²³(Avogadro number)

Substituting the values, we get

mole of glucose= 1.2 x 10²⁴÷6.02 x 10²³

mole of glucose= 1.99 moles

Therefore, 1.99 moles of glucose are present in 1.2 x 10²⁴  molecules.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ2

As the amount of salt in water increases, the density of the water increases. The more particles present in unit volume the more densely packed the substance.

Density of a substance is the measure of its mass per unit volume. Density describes how closely its particles are  packed. Densely packing means more particles in a unit volume.

The density of water is 1 g/ml. However, when the salinity increases, the salt solution increases in density by the solute particles. If the density of an object is less than water, it will float on it. Objects denser than water will sink on water.

As the salinity increases, density of water increases, makes the surface tension also increases, which best illustrates what happens in dead sea. Hence, option b is correct.

Find more on water density:

https://brainly.com/question/14373997

#SPJ6

Explanation:

density, albedo, light e-folding depth, specific surface area (SSA), crystal size and shape, thermal conductivity, permeability, diffusivity,

Answer:

[tex]\boxed {\boxed {\sf About \ 92.2 \ moles \ of \ Magnesium}}[/tex]

Explanation:

To convert from atoms to moles, we must Avogadro's number:

This number tells us the amount of particles (atoms, molecules, etc.) in 1 mole of a substance. In this case, it is atoms of magnesium in 1 mole.

Now, let's set up an expression using:

[tex]\frac {6.022 * 10^ {23} \ atoms \ Mg}{ 1 \ mol \ Mg}[/tex]

Multiply this by the given number of atoms.

[tex]5.55*10^{25} \ atoms \ Mg *\frac {6.022 * 10^ {23} \ atoms \ Mg}{ 1 \ mol \ Mg}[/tex]

Flip the fraction so the atoms of magnesium can cancel.

[tex]5.55*10^{25} \ atoms \ Mg *\frac { 1 \ mol \ Mg }{6.022 * 10^ {23} \ atoms \ Mg}[/tex]

[tex]5.55*10^{25} *\frac { 1 \ mol \ Mg }{6.022 * 10^ {23}}[/tex]

Multiply and condense this into 1 fraction.

[tex]\frac { 5.55*10^{25} \ mol \ Mg }{6.022 * 10^ {23}}[/tex]

[tex]92.1620724 \ mol \ Mg[/tex]

The original measurement had 3 significant figures, so our answer must have that many as well. For the number we calculated, that is the tenth place. The 6 in the hundredth place tells us to round the 1 to a 2.

[tex]92.2 \ mol \ Mg[/tex]

It is about 92.2 moles of magnesium.

Answer:

27,21 g

Explanation:

molair mass of H2O2 = 34,0147 g/mol

0,8 mol x 34,0147 g/mol = 27,21 g

Answer: Summer Solstice

In North America, around June 21, Earth tilts on its axis toward the Sun. This is called the summer solstice, and it is when the Northern Hemisphere has the most daylight of any time of the year. It is also when the Sun appears to be the highest in the sky, and it has its greatest angle to Earth.

The biggest difference between the equinox and the solstice is that a solstice is the point during the Earth's orbit around the sun at which the sun is at its greatest distance from the equator, while during an equinox, it's at the closest distance from the equator.

Explanation:

Answer:

354 gram

Explanation:

No of formula units = no of moles × Avogadro's number

Number of moles = no of formula units/ Avogadro's number

No of moles = 1.30×10^24/60.02×10^23

No of moles = 2.159 moles

Mo of moles = mass in gram/ molar mass

Mass in gram = no of moles× molar mass

Mass in gram =2.159×164

Mass in gram = 354.15 gram

The grams that are present in [tex]1.30 * 10^{24}[/tex] formula units of [tex]Ca(NO_3)_2[/tex] is 354 gram that can be calculated using number of moles.

(B) 354 g

A mole is defined as [tex]6.02214076 * 10^{23}[/tex] of some chemical unit, be it atoms, molecules, ions, or others.

No. of formula units = no of moles × Avogadro's number

Number of moles = no of formula units/ Avogadro's number

No. of moles = [tex]1.30*10^{24}/6.022*10^{23}[/tex]

No. of moles = 2.159 moles

The Number of moles is defined as the given mass over molar mass.

No. of moles = Mass / Molar mass

Mass = no. of moles× molar mass

Mass =2.159×164

Mass = 354.15 gram

Thus, option B is correct.

Find more information about Moles here:

brainly.com/question/1358482

Answer: 4.heat being added or released

Answer:

C

Explanation:

increase potential energy ( in motion)

Answer:

sodium, Na

Explanation:

Na, is the smallest with atomic number 11 and it has one valence electron

Answer:

a- customary systems..

Answer:

The cell is in a Hypotonic solution. When a cell is in a Hypotonic solution the lower osmotic pressure causing water to move across the pressure gradient into the solution causing the cell to shrivel.

Answer:

From the equation you will see that 1 mol of propane generates 4 mols of water.

Since the molar mass of water  

M ( H2O)=2×1+16=18g/mol

2 mol propane will generate  

2 ×4×18=144g   of water

Explanation:

Since the molar mass of water  

M ( H2O)=2×1+16=18g/mol

2 mol propane will generate  

2 ×4×18=144g   of water

Answer:

well, we have so much better and more tech and we are a lot smarter than we were before.

Explanation:

Answer:

We have way more advanced technology than our ancestors and we have a better idea of how the earth was millions of years ago.

Explanation:

Answer:

A. the light subatomic.... is correct answer

Answer:

I think #5 is its structure

Explanation:

Answer: The first is Genes and the second one is the structure.

Explanation:

The number of moles = 0.5

Given

3.01 x 10²³ atoms Cu

Required

moles

Solution

The mole is the number of particles(molecules, atoms, ions) contained in a substance  

1 mol = 6.02.10²³ particles

Can be formulated

N=n x No

N = number of particles

n = mol

No = Avogadro's = 6.02.10²³

Input the value :

n = N : No

n = 3.01 x 10²³ :  6.02.10²³

n = 0.5

Answer:

K = 30N/m

Explanation:

We use this equation:

F= k∆x

Where ∆x refers to the amount or stretch or compression and k is the spring constant.

F = force

k = spring constant

∆x = change in length of spring

We don't know the value of k, so we make k the subject:

k = F/∆x

k = 6N x 0.2m

k = 30N/m

Answer:13.70 i think

Explanation:

Answer: 2,1,1

Explanation:

Answer:

A. H2O

Explanation:

Let us first define the three types of bonds:

1. Nonpolar Covalent: electronegativity difference < 0.4

2. Polar Covalent: electronegativity difference between 0.4 and 1.8

3. Ionic: electronegativity difference > 1.8

This will help us eliminate choices C and D:

-NaCl has a electronegativity difference of 3.0 - 0.9 = 2.1 (ionic bond)

-Cl2 has a electronegativity difference of 3.0 - 3.0 = 0 (nonpolar covalent bond)

However, we still have two more options, A and B, but they are not diatomic for us to use the electronegativity differences with.

We must now consult their geometries. Because CO2 has a linear geometry (O=C=O), the two sides will cancel each other out, resulting in a nonpolar covalent bond. At this point, by process of elimination, we can already determine the answer to be A. H2O. We can verify this by looking at the geometry of H2O, which is bent (H-O-H; imagine the O is above the H's, I cannot draw it in this response). H2O's bent geometry classifies it as polar covalent; the electrons are slightly more attracted towards the O, the more electronegative element. Side note: this makes the O slightly more negative in charge, whilst the H's are slightly more positive in charge.

P.S. I apologize for not being able to draw and demonstrate that last paragraph, but I hope you get a general idea. You can search up the "H2O geometry" and "CO2 geometry" to get a better idea! :)

H₂O represents a nonpolar molecule containing polar covalent bonds. Hence Option (A) is correct

A polar covalent bond exists when atoms with different electronegativities share electrons in a covalent bond.

Consider the hydrogen chloride (HCl) molecule. Each atom in HCl requires one more electron to form an inert gas electron configuration.

Water (H₂O), like hydrogen Chloride (HCl), is a polar covalent molecule. When we look at a diagram of water , we can see that the two hydrogen atoms are not evenly distributed around the oxygen atom

Water (H₂O) is polar because of the bent shape of the molecule. The shape means most of the negative charge from the oxygen on side of the molecule and the positive charge of the hydrogen atoms is on the other side of the molecule.Thus, This is an example of polar covalent chemical bonding.

Therefore, H₂O represents a nonpolar molecule containing polar covalent bonds. Hence Option (A) is correct

Learn more about bonding here :

brainly.com/question/1603987

#SPJ2

Answer:

Answer:

The mole ratio of C₄H₁₀ and CO₂ is 2 : 8, which  simplifies to 1 : 4.

Explanation:

The mole ratio is the relative proportion of the moles of products or reactants that participate in the reaction according to the chemical equation.

The chemical equation given is:

2C₄H₁₀ + 13O₂ → 8CO₂ + 10H₂O

Once you check that the equation is balanced, you can set the mole ratios for all the reactants and products. The coefficients used in front of each reactant and product, in the balanced chemical equation, tells the mole ratios.

In this case, they are: 2 mol C₄H₁₀ :  13 mol O₂ : 8 mol CO₂ : 10 mol H₂O

Since you are asked about the mole ratio of C₄H₁₀ and CO₂ it is:

2 mol C₄H₁₀ : 8 mol CO₂ , which dividing by 2, simplifies to

1 mol C₄H₁₀ : 4 mol CO₂, or

1 : 2.

Explanation:

Answer:

YESSIR

Explanation: