I do not understand what they mean by a smooth line graph

I Do Not Understand What They Mean By A Smooth Line Graph

Answers

Answer 1

A smooth line graph is use to draw a general pattern curve rather than just connect the points.

We use to draw a smooth line graph because smooth line reflects a general pattern and we can determine the general behavior of data points to be plotted. When we just connect the dots we are unable to find the equation because of broken line. when draw a graph we have to find out the line that could fit all the points and make a smooth pattern, smooth line curve is very helpful for the calculations.

Thus, A smooth line graph is use to draw a general pattern curve rather than just connect the points.

To learn more about  graph here

https://brainly.com/question/4012383

#SPJ1


Related Questions

which best compares the particles of the substance when it is in region 1 with the particles of the substance when it is in region 3? the particles are slower in region 3.

Answers

The correct statement is the particles are more orderly in region 1, which is the solid state. The other statements are false.

Since, the region 1 is solid state, region 2 is liquid state and the region 3 is gaseous state, particles are more orderly in region 1.

In solid, the particles are closely packed together. They are not free to move within a substance. The particles in solid are in a regular pattern or arrangement making the particles of substance more orderly.

In liquid, particles are close together but they are not in a regular arrangement or pattern, and in gases, the particles of substance are well separated, i.e. not closely packed with no regular arrangement.

So, particles are more orderly in region 1.

To learn more about solid state,

brainly.com/question/1955461

#SPJ4

Correct question is :

Which best compares the particles of the substance when it is in region 1 with the particles of the substance when it is in region 3? The particles are slower in region 3. The particles are more orderly in region 1. The particles have more kinetic energy in region 1. The particles have less freedom of motion in region 3.

Cylinder containing 22ml. The mercury used to fill the cylinder weighs 308 g. from this information, calculate the density of mercury

Answers

The density of the mercury is 14 gm/ml.

Given,

Volume of cylinder = 22 ml

Mass of mercury in the cylinder = 308 g

We have to find the density of the mercury.

The density of any substance is defined as the mass per unit volume of the substance. Or, it is the ratio of mass to volume. The units of density are kg/m³, g/ml, or g/cm³. Each substance has its own density. It is the mass of an object compared with its volume.

It is given by the formula:

Density = Mass/ volume

Density = 308 gm/ 22 ml

Density = 14 gm/ml

Hence, the density of mercury is 14 gm/ml.

To learn more about density, visit: brainly.com/question/13213240

#SPJ9

1. Explain why the lattice disassociation enthalpy of magnesium chloride is greater than that of calcium chloride

2. Explain why the lattice disassociation enthalpy of magnesium oxide is greater than that of magnesium chloride

Answers

Lattice disssociation enthalpy of magnesium chloride is greater then that of calcium chloride.

Because The cations are progressively larger through the series, increasing the separation between oppositely charged ions. Potential energy decreases with separation of the charges.

The difference in lattice energies between MgCl2 and CaCl2 is 269 kJ.

2.    lattice disassociation enthalpy of magnesium oxide is greater than that  of magnesium chloride.

because magnesium chloride consist of 3 ions in total , whereas magnesium oxide has 2 ions and oxide ions are smaller than chloride ions, Which  means that the ions are closer together in the lattice of magnesium oxide than magnesium chloride , and which also increases the strength of the attractions.

learn more about lattice enthalpy of compounds here-

https://brainly.com/question/20814973

#SPJ9



Calculate the maximum wavelength of light capable of dissociating the cl–f bond in one molecule of chlorine monofluoride if the bond energy, or bond dissociation energy, is 251 kj/mol.

Answers

According to bond energy, the maximum wavelength of light is 475 nanometers.

We need to know about bond energy to solve this problem. Bond energy is the energy needed to bond other atoms in the molecule. To determine the energy in one molecule of chlorine monofluoride, we can use this formula:

E = BE / Na

where E is the energy of photon, BE is bond energy and Na is Avogadro's number (6.02 x 10²³ atoms/mol)

Now, we can calculate the shortest wavelength by using Einstein's equation for photon energy:

E = h . c / λ

where h is Planck constant (6.6 x 10¯³⁴ J.s), c is the speed of light (3 x 10⁸ m/s) and λ is the wavelength.

From the question above, we know that

BE = 251 kJ/mol = 251 x 10³ J/mol

By substituting the given parameters, we can calculate the maximum wavelength

E = BE / Na

h . c / λ = 251 x 10³ / 6.02 x 10²³

6.6 x 10¯³⁴ . 3 x 10⁸ / λ = 251 x 10³ / 6.02 x 10²³

λ = 4.75 x 10¯⁷ m

λ = 475 nm

Find more on bond energy at: https://brainly.com/question/14593563

#SPJ4

What are the two anions used in this lab to perform selective precipitation of the
unknowns?
chloride and chromate ions
sulfide and carbonate ions
sulfide and ammonium ions
o chloride and sulfide ions

Answers

Answer: Chloride and Chromate ions

Explanation:

Two anions used in this lab to perform selective precipitation of the unknowns are chloride and chromate ions.

Anions such as  Cl− ,  Br− ,  SO2−4 ,  CO2−3 ,  S2− ,  Cr2O2−4 ,  PO2−4 ,  OH−  etc., forms a mixture of metal ions in a solution which can be separated by precipitation. If a metal ion or a group of metal ions forms insoluble salts with a particular anion, then they can be separated from others by the precipitation.

Anions can also be separated by the precipitation with appropriate metal ions. There are no separation lines between insoluble salts, sparingly soluble, and soluble salts, but their concentrations of saturated solutions are small, medium, and large. For insoluble and sparingly soluble salts, solubility products are usually listed. But for soluble salts they are not given.

Solubility products for soluble salts are very large.

To learn more about precipitation,

brainly.com/question/28384354

#SPJ4

what is the naming for TiO?

Answers

Answer:

Titanium oxide.

Explanation:

titanium oxide is the correct naming for TiO

The net movement of molecules from a region where their initial concentration is higher to a region where their initial concentration is lower is called.

Answers

Answer:

It is Diffusion

What is the correct balanced formula for combining Beryllium and Nitrogen? 1 p
the numbers in the answer choices represent subscripts
OBEN
O Be2N
Be3N1
Be3N2

Answers

Answer:

Be3N2

Explanation:

The valancy of beryllium is 2 and Nitrogen is 3 and from criss-cross method

Be. N. ( name of elements)

2. 3. ( their valancy)

Enter a balanced chemical equation for the reaction of solid rubidium with liquid water.

Answers

The balance chemical reaction or equation for the given question is :

2Rb (Rubidium) (s) + 2H₂O (Water) (l) → H₂ (Hydrogen) (g) + 2RbOH (Rubidium Oxide) (l)

Rubidium (Rb) is an alkali metal in the similar group (Group I) as sodium (Na) and as one goes down the periodic table of group the ionization energy decreases (downfall).Hence Rubidium (Rb) also reacts with water goes to the creation of hydrogen gas. Its reaction with water (H2O)  is same to that of sodium (Na).

To Balance a Chemical Equation we need to mention the algebraic terms both the sides.

Balancing a Chemical Equation is related to law of conservation of mass.

To Balance a Chemical Equation , place portions as demanded in front of the symbols of formulas so the same number of each type of snippet occurs in both reactants and products.

To know more about Balance Chemical Equation here :

https://brainly.com/question/28294176?referrer=searchResults

#SPJ4

How would the following atoms bond? Match items from left to the right. Please help!! Actual answers only!!

Answers

The correct pairing of the elements based on the nature of chemical bonds formed is:

Na + F = NaFCa + O = CaOB + N = BN

What are chemical bonds?

Chemical bonds are bond which are formed between atoms of the same element or different elements by a transfer of a sharing of electrons.

There are two main types of chemical bonds:

Ionic or electrovalent bonds, andCovalent bonds

Ionic bonds results in the formation of oppositely-charged ions as electrons are transferred from one atom to another.

Example of ionic bonds are the chemical bonds formed between sodium and fluorine to form sodium fluoride, and the chemical bond formed between calcium and oxygen to form calcium oxide.

Covalent bonds are formed when atoms of the same or different elements share electrons between them.

Examples of covalent bonds are the chemical bonds formed between Boron and Nitrogen to form boron nitride.

Learn more about chemical bonds at: https://brainly.com/question/819068

#SPJ1

Wood tends to be hard and relatively inflexible, especially when it's been dried. This is why wood is an excellent building material.

Answers

Answer:

Explanation:

Physical Property

Explanation:

Hardness is the physical property

Drag each tile to the correct location.

What types of mixtures are these? Homogeneous or Heterogeneous

- peanuts and almonds mixed
together in a bowl
- a bucket full of sand and gravel
- a cup of tea and sugar
- food coloring dissolved in water



Answers

Answer:

below

Explanation:

- peanuts and almonds mixed

together in a bowl heterogeneous

- a bucket full of sand and gravel

heterogeneous

- a cup of tea and sugar homogeneous

- food coloring dissolved in water homogeneous

Which statement best describes force? (1 point)
Force is a vector quantity that measures both direction and magnitude of a push or pull on an
object.
Force is a vector quantity that measures both momentum and magnitude of a push or pull on an
object.
Force is a vector quality that measures both direction and magnitude of a push or pull on an
object.
Force is a scalar quantity that measures both direction and magnitude of a push or pull on an
object.

Answers

Answer:

Force Is a Vector Quantity that measures both direction and magnitude of a push or pull on an object.

Explanation:

The formula for Force= Mass × Acceleration. And when applying force, there is a direction at which the body is focused on. Hope this helps

Answer:

(Question 1) Which statement best describes force?

(Answer) Force is a vector quantity that measures both direction and magnitude of a push or pull on an object.

(Question 2) A soccer ball is traveling downfield with a force of 1.2 kN and strikes another soccer ball that is stationary. Which of the following describes the result of the collision?

(Answer) The stationary soccer ball will begin moving downfield and the ball that struck it will slow down.

(Question 3) Which of the following scenarios accurately describes magnitude and direction?

(Answer) A car traveling northward with 5 kN of force could be brought to a stop by a southward force of 5 kN.

(Question 4) What is force directly proportional to?

(Answer) the acceleration and mass of an object

(Question 5) Two ropes are being used to suspend a box. Each rope is exerting 5 N of upward force. If the forces are balanced and the box is stationary, how much force is being exerted by the box itself and in which direction?

(Answer) The box exerts 10 N of force downward.

Explanation:

just did the Quick Check UwU Enjoy

Calculate the frequency of yellow light with a wavelength of 580 x 10–9 m.

Answers

Answer:

5791

Explanation:

Easy peasy lemon squeazy

.115km=_______cm

Please I need help!
Explanation need I know the answer!

Answers

.115 km is equal to 11500cm

Answer:

115km is equal to 11500000cm

Explanation:

Use the information from the article to answer the question. why is pluto now called a dwarf planet?

Answers

Answer:

coz it doesn't meet the three criteria the iau uses to define a full sized planet

Explanation:

it meet all other except one :has no cleared its neighboring region of other object

glucose molecules bond together in a process known as dehydration synthesis. what happens in this process? (4 points) water is used as a reactant in order to build the polysaccharide molecule. a water molecule is formed from the hydrogen and oxygen atoms removed. the reaction uses water molecules to break the bonds in each glucose. water molecules are removed from each glucose molecule by the addition of heat.

Answers

Glucose molecules bond together in a process known as dehydration synthesis. In this process, a water molecule is formed from the hydrogen and oxygen atoms removed.

The process of chemical reaction in which water is lost is named as dehydration process. During the process of formation of the larger molecules from the smaller monomers, a water molecule is released. It is the dehydration synthesis.

The glucose monomers are bonded together and with each bond, in the synthesis process. The water molecule is lost in this process. Polymers are formed, such as starch, and cellulose, from the monomers of glucose.

Polymers such as DNA, proteins, and carbohydrate, are formed through the process of dehydration synthesis.

Therefore, the correct point explaining the process of dehydration synthesis is that a water molecule is formed from the hydrogen and oxygen atoms removed.

To learn more about dehydration synthesis,

brainly.com/question/27998227

#SPJ4

What is the concentration of chloride ions in a 0.349 m solution of sodium chloride?

Answers

That’s is the calcium of the 348 which is the answer of m that is sodium of the solution

Use the atomic mass of lithium to calculate the relative abundances of the two isotopes. express your answers using one decimal place. enter your answers separated by a comma.

Answers

The relative abundance of the isotopes is 2.3137.

How do we calculate relative abundances?

The relative abundance for a specific ion in the sample can be calculated by dividing the number of ions with a particular m / z m/z m/z ratio by the total number of ions detected.

Relative abundance = [tex]\frac{m}{z}[/tex]

The atomic masses of Li are 6.941amu.

The atomic number of Li is 3

Relative abundance =  [tex]\frac{6.941}{3}[/tex]

Relative abundance = 2.3137

The relative abundance of the isotopes is 2.3137.

To learn more about relative abundance, refer

to https://brainly.com/question/6258301

#SPJ4

The isotopes have a relative abundance of 2.3137.

What is relative abundance?

A species' relative abundance is determined by how many of that species there are in relation to all the other organisms in the area. Among the most well-known and extensively researched patterns in macroecology, relative species abundances frequently follow certain patterns.

Relative abundance = m/z

The atomic masses of Li are 6.941amu.

The atomic number of Li is 3

Relative abundance = 6.941/3

Relative abundance = 2.3137

The isotopes have a relative abundance of 2.3137.

To learn more about relative abundance, refer

https://brainly.com/question/1594226

#SPJ4

considering the equation for the oxidation of glucose, the cell must have a constant supply of carbon dioxide for this reaction to occur. group starts

Answers

The statement would be false as the given equation for the oxidation of glucose, the cell must have a constant supply of carbon dioxide for this reaction to occur. The statement is false because the Carbon Dioxide (CO2) is a product not a reactant.

The oxidation of glucose in the presence of oxygen in the chemical reaction is known as respiration. It is very important for human metabolism rate. It helps proper growth of human metabolism rate and maintain the human body and immune system. The given chemical reaction is :

Glucose (C6H12O5) + 6 O2 -------> 6 Carbon Dioxide (CO2) + Water

The given question is incomplete. The complete question would be Considering the equation for the oxidation of glucose, the cell must have a constant supply of carbon dioxide for this reaction to occur.

You have to mentioned the above statement as True or False.

To know more about oxidation of glucose here :

https://brainly.com/question/15328745?referrer=searchResults

#SPJ4

____ is an example of a substance that is not soluble.

(I have to fill in the blank.)

Answers

Answer:

Substance

Explanation:

Substances that do not readily dissolve in water can be described as hydrophobic substances. Hydrophobic substances are those which when exposed.

Oil

Oil is a substance that is not soluble in water because it is hydrophobic due to it being non polar

Water is polar and the common saying is that “like dissolves like”. Thus, oil being non polar, is insoluble or not soluble.

When oil is added to water, notice how oil creates a separate layer on top of the water.

Hope this helps! :)

given that a mineral has three planes of cleavage, one of which is inclined, and breaks into rhombs, is the mineral mica, pyroxene, amphibole, halite, or calcite?

Answers

Answer:

Calcite

Explanation:

Why do courtship behaviors usually happen in response to seasonal changes? (1 point)
Responses

to ensure that mating does not interfere with migration season
to ensure that mating does not interfere with migration season

to ensure that offspring are born in optimal survival conditions
to ensure that offspring are born in optimal survival conditions

to ensure that mating happens in optimal survival conditions
to ensure that mating happens in optimal survival conditions

to ensure that offspring do not interfere with migration season

Answers

Courtship behaviours usually happen in response to seasonal changes to ensure that mating does not interfere with migration season. So the correct option is A.

What are courtship behaviours?

Animals engage in courting behaviour, which leads to mating and eventual reproduction. Depending on the quantity of chemical, optical, or aural inputs involved, courtship can be quite basic or extremely complicated, comprising a variety of activities performed by two or more people.

To entice a partner, many species turn to courtship feeding. Some insect species' females employ odorous compounds known as pheromones to draw males in close proximity, like the spongy moth Lymantria dispar. On spring nights, much of the world can hear the courting choruses of frogs of the Rana species and the touching courtship rituals of male painted turtles, Chrysemys species.

Therefore the correct option is A.

Read more about courtship behaviours, here

https://brainly.com/question/14083774

#SPJ1

what technological advancement was required for rutherford to conduct his experiment ?

Answers

Rutherford conducted a famous experiment called the gold foil experiment.

He took a skinny sheet of gold foil. He used a special gadget to shoot alpha particles undoubtedly charged debris on the gold foil. most debris passed straight thru the foil like the foil was now not there. They bombarded very skinny sheets of gold foil with fast-shifting alpha debris. Rutherford found that a small percent of alpha debris had been deflected at massive angles, which could be explained by using an atom with a very small, dense, definitely-charged nucleus at its middle.

Rutherford designed an experiment to apply the alpha particles emitted via a radioactive element as probes to the unseen global atomic structure. If Thomson changed into correct, the beam might move immediately through the gold foil. most of the beams went via the foil, however, some have been deflected. Ernest Rutherford postulated the nuclear structure of the atom, determined alpha and beta rays, and proposed legal guidelines for radioactive decay. In 1911, Rutherford, Marsden, and Geiger determined the dense atomic nucleus by bombarding a thin gold sheet with the alpha particles emitted through radium.

Learn more about Rutherford's experiment here:-https://brainly.com/question/14996029

#SPJ9

Identified triads of elements with similar properties: organized elements according to increasing atomic mass:

Answers

Triads of elements with similar properties are : Strontium, Calcium, and Barium.

Dobereiner organized elements according to atomic mass.

He organized them by adding of first and third number of element's atomic mass and their average would be nearly the same as the atomic mass of the second one.

Triads are known as the three elements group, which were are given by the scientists to understand the concept of the arrangement of the elements better on the basis of their masses.

On the basis of this triad, Dobereiner introduced three triads. He added the atomic mass of first and third element and their average would be same or nearly the same as the atomic mass of the second one.

It is helpful to understand the numbering of elements better. But this system has some major drawbacks due to which, it is not followed by anyone today.

This makes modern periodic table a good option to understand about the elements better.

Therefore, the three triads of Dobereiner which were introduced by him are Strontium, Calcium, and Barium.

To learn more about Dobereiner triads,

brainly.com/question/11741731

#SPJ4

How can properties of matter be used to classify matter

Answers

The properties of matter which can be used to classify it include the following:

Physical properties such as shape, density etc.Chemical properties such as reactivity.

What is Matter?

This is referred to as any substance which has mass and occupies space thereby meaning that it has a volume.

Matter can be classified into three forms which are:

SolidLiquidGas

Matter has physical properties such as shape in which a solid has a definite shape while gas and liquid doesn't due to the distance of their molecules. On the other hand chemical properties such as reactivity also determines the classification as gas is known to be more reactive while solids are least reactive.

Read more about Matter here https://brainly.com/question/3998772

#SPJ1

What does pH measure? What 2 ions are equal in a neutral pH of 7?

Answers

Answer:

Basically it measures the acidity or alkalinity of a substance.

in a technique used for surface analysis called auger electron spectroscopy (aes), electrons are accelerated toward a metal surface. these electrons cause the emissions of secondary electrons (called auger electrons) from the metal surface. the kinetic energy of the auger electrons depends on the composition of the surface. the presence of oxygen atoms on the surface results in auger electrons with a kinetic energy of approximately 512 ev .

Answers

We've to find it inadequately weight thing at the admitted election if we know it carries the kinetic energy. Now we've to figure out the relationship between the very post in order to set up our equation. So we know we are looking for the weight length and we've been handed with the kinetic energy.

Now we know that Connect energy has a relationship with the haste. If we are going to rearrange the question then we've two times kinetic energy equals to mass haste forecourt or haste forecourt. You close to two times collected energy that bothered by the mass were haste because the square root of two times connected energy over the mass Right then. Now we've a relationship. They'd kinetic energy on the haste as well.

And now we just have to associate a haste with the wavelength can do this. It's close to cranks constant divided by the instigation we know Constant has a number of 6.63 times 10 to the power of native 34. rather of jewels per second, we are going to use kilograms either square per second, because on the weight of the electron then, which is9.1 times 10 to the power negative 31 we also have a kilogram. So we've to have a kilogram over there to cancel it now onto the haste. It's going to be a big bone , no, two times the kinetic energy, which is five or six. So we've to do a conversion of ev to 1.602 times 10 to the power of negative 19 augar developed by the mass again, which is9.1 times 10 to the power of -0.545 is the final answer.

To know more about Augar electron spectroscopy here :

https://brainly.com/question/24230107?referrer=searchResults

#SPJ4

There are 8 computers in the computer lab that each have 20 gb hard drives. how many bytes ( b. of disk space do we have in the computer lab in total.

Answers

Converting gigabytes(GB) to bytes, there are 1.6 x 10^11 bytes of disk space in the computer lab.

If there are 8 computers in the computer lab that each have 20 GB hard drives, then multiplying 8 by 20 will give the total disk space in GB.

total disk space = 8 x 20GB

total disk space = = 160GB

Conversion is the process of changing the value of one form or unit to another. It can be changing ones unit of length, weight, volume or even currency to another.

A conversion factor is a number used to change one set of units to another, either by multiplying or dividing.

If 1 gigabyte (GB) is equal to 1 x 10^9 bytes, then multiply 1 x 10^9 to the total disk space,

total disk space = 160GB

1 gigabyte (GB) = 1 x 10^9 bytes

total disk space = 160(1 x 10^9) bytes

total disk space = 1.6 x 10^11 bytes

To learn more about conversion: brainly.com/question/97386

#SPJ4

How many protons, neutrons, and electrons are there?

Answers

Answer:

proton-27

electron-25

neutron-35

Explanation:

Other Questions
1: Bethany and Summer are waitresses. They share the tips in the ratio of the hours they have worked. Bethany worked from 11am until 5pm. Summer worked from 1pm until 9pm What fraction of the tips does Bethany keep? 3. Did the monarch (the King) still control the House of Burgesses?4. Why didn't the Spanish or the French have representative bodies in their colonies? please i need help the answer choices are in the picture with the question! Which colony was founded as a colony of religious freedom in reaction to the Puritans? The Thai Pepper has a hotness rating of 7.5 x 10^4 on the Scoville scale.The Red Savina Habanero has a hotness rating of 4.6 x 10^5 on the Scoville scale.How many times hotter is the Red Savina Habanero than the Thai Pepper? aDivide (4.6 x 10^5) / (7.5 x 10^4) = (4.6 / 7.5) x (10^(5-4)) = .613 x 10^1 = 6.13 times hotter bMultiply (7.5 x 10^4) x (4.6 x 10^5) = (7.5 x 4.6) x (10^(4+5)) = 34.5 x 10^ 9 = 3.45 x 10^10 cDivide (7.5 x 10^4) / (4.6 x 10^5) = (7.5 / 4.6) x (10^(4-5)) = 1.63 x 10^ 1 = 16.3 times hotter dMultiply (7.5 x 10^4) x (4.6 x 10^5) = (7.5 x 4.6) x (10^(4+5)) = 34.5 x 10^ 9 = 3.45 x 10^10 times hotter Write each logarithmic expression as a single logarithm. 1/2 (logx4 + logx y) - 3 logx z Social ________ is characterized by an individual or organization who seeks out opportunities to improve society by using practical, innovative, and sustainable approaches. Choose the reason(s) why plants need fertilizer. (There may be more than one answer.)To provide oxygenTo provide nitrogen for proteinsTo provide carbon dioxideTo provide various mineralsTo provide protein for plant growth What is the number of oxygen atom(s) on which the negative charge will resonate following relevant resonance structures? Erin wants to put in a fence around her rectangular garden. If the fence will be 20 ft. wide by 25 ft. long, what is the area of the garden? -10-9-410698+7654m19 Evaluate 7p+8=12-3p how do I solve it course hero what is the economic system where peasant residents of a manor provide labor and goods for their lord in return for protection? group of answer choices manorialism vassalage monasticism feudalism What do you think? should the government scrutinize corporate actions more closely to limit the tremendous power corporations wield in our society, or should government try as much as possible to get out of the way so corporations can maximize profits and shareholder value? you Whoever answers this is brainliest!!Melissa needs to study hard for finals but she can barely stay awake. Her mom made her a turkey sandwich and she had a banana and an oatmeal cookie for dessert. Write down an explanation of what might have happened and some suggestions on what she could do differently. 6. What value of x cannot beevaluated in the functionF(x)? WILL GIVE BRAINLIEST! PLEASE HELP ME! help help help help !!!!!!! please what is the answer to this A 2 N and 6 N pull on an object to the right and a 4 N force pulls to the left a 0.5 kg object. What is the net force on the object ?