If you change the magnetic field inside a closed loop of wire, you induce in the loop is current .
As per the Faraday law, the current help to induce the electric field in a close loop.
Electric field- it is defined as the electric force per unit charge. The direction of the field is taken to be in the direction of the force which applied on a positive test charge.
It is outward from a positive charge. It is inward from a negative charge.If you change the magnetic field inside a closed loop of wire, you induce in the loop is current .
To know more about electric field.
https://brainly.com/question/11650932
#SPJ1
What is the efficiency of a worm gear reducer if input torque is 6532 inch-pounds and output torque is 5623 inch-pounds?
Th efficiency of the worm gear reducer if input torque is 6532 inch-pounds would be 86%.
What is Worm gearWorm gears are a common power-transmission component used to reverse the direction of a rotating shaft's motion as well as to reduce speed and increase torque between non-parallel rotating shafts.
They are used on shafts with axes that are perpendicular and do not intersect.
What is a worm gear reducer’s efficiency?Worm gears typically have a ratio range of 5:1 to 60:1.
How effective is a single worm set?
The efficiency of a single worm set varies with ratio and speed; this efficiency can vary from 40 to 93%.
Calculationn = Output/input x 100
= 5623/6532 x 100
= 0.86 x 100
= 86%
Thus, the efficiency is calculated as 86%
To know more about efficiency visit:
https://brainly.com/question/13828557
#SPJ4
if a gannet hits the water at , what height did it dive from? assume that the gannet was motionless before starting its dive.if a gannet hits the water at , what height did it dive from? assume that the gannet was motionless before starting its dive.
52.24 meters is the appropriate height to dive from.
How to calculate the height?Speed = v
Gravitational acceleration = g
v = 32m/s
h = v2/2g
= 32/ 2 * 9.8
= 52.24 m
Therefore, the height the gannet must dive from is 52.24 meters.
To learn more about height, refer
https://brainly.com/question/25725763
#SPJ4
it is raining. the rain falls at 12 m/s at an angle of 30˚ east of the vertical. a person is driving through the rain heading east at 20 m/s. a. as the person glances out of their driver’s side window, what angle does the rain appear to make with the vertical? 53.4˚ w of vertical b. what is the apparent speed of the rain as seen by the driver of the car in that window? 17.43 m/s
Rain falls downward at 6m/s and wind started to flow horizontally. Due to the flow of wind, if the bus driver saw the rain falls vertically downwards.
What is Rain falls?
Rain is made up of water vapor droplets that have condensed from the atmosphere and have fallen due to gravity. Most of the fresh water that falls to the Earth as rain is deposited by rain, which is an important part of the water cycle. It offers irrigation for crops, water for hydroelectric power plants, and favorable environmental conditions for a variety of ecosystems. Moisture traveling along weather fronts, three-dimensional zones of temperature and moisture differences, is the primary driver of rain formation. When convective clouds (those with strong upward vertical motion) like cumulonimbus (thunder clouds), which can condense into narrow rainbands, are sufficiently wet and moving upward, precipitation can form. Where upslope flow is maximum inside windward sides of the topography, considerable precipitation is possible in mountainous places.
To learn more about Rain falls from the given link:
https://brainly.com/question/26406747
#SPJ4
I need help on this question asap
Answer:
A-to determine how tempreture affects bounce height.
A hot air balloon starts rising from ground with an acceleration 1.25m/second square. after 8 sec, a stone is dropped from the balloon, time taken to hit the ground will be ?
The stone that is dropped from the balloon, will hit the ground in a time of: 2.857 s
To solve this exercise the formula for uniformly varied rectilinear motion (UVRM) and free fall to be applied are:
h = vi * t + (a * t²) / 2t = √[ (2*h) / g]Where:
a = accelerationvi = initial velocityh = height traveledg = acceleration due to gravityt = timeInformation about the problem:
vi = 0 m/st = 8 sa = 1.25 m/s²h = ?g = 9.8 m/s²t = ?Applying the formula for UVRM we can calculate the height of the hot air balloon:
h = vi * t + (a * t²) / 2
h = 0 m/s * 8 s + [1.25 m/s² * (8 s)²] / 2
h = 0 m + [1.25 m/s² * 64 s²] / 2
h = 0 m + 80 m / 2
h = 80 m/ 2
h = 40 m
Knowing height of the hot air balloon and applying the time formula we can calculate the time taken for the stone to hit the ground:
t = √[ (2*h) / g]
t = √[ (2* 40 m) / 9.8 m/s²]
t = √[ 80 m / 9.8 m/s²]
t = √[ 8.163 s²]
t = 2.857 s
What is free fall?It is when the object or mobile falls from a height (h) with a positive acceleration equal to the gravity, describing a vertical rectilinear travel.
Learn more about free fall at: brainly.com/question/11257529
#SPJ4
PLEASE HELP. 100 points!
The earliest light in the universe was orange. Describe how that light turned into the background microwave radiation we observe today.
A person riding in an airplane drops a rock out of the door of the plane which is moving at 550 mile/hr. The airplane remains on its original horizontal path and maintains a constant velocity. Where will the airplane be located when the rock hits the ground? neglect air resistance.
By using uniform motion, the location of the airplane when the rock hits the ground is ( 550 . √(2h/g) + h )miles.
We need to know about the uniform motion to solve this problem. The uniform motion is an object's motion under acceleration. It should follow the rule
vt = vo + a . t
vt² = vo² + 2a . s
s = vo . t + 1/2 . a . t²
where vt is final velocity, vo is initial velocity, a is acceleration, t is time and s is displacement.
From the question above, we know that
vo = 550 mile/h
Find the time taken to hit the ground
s = vo . t + 1/2 . a . t²
h = 0 . t + 1/2 . g . t²
t² = 2h/g
t = √(2h/g)
Find the distance traveled by plane
s = vo . t + 1/2 . a . t²
x = vo . t + 1/2 . a . t²
x = 550 . √(2h/g) + 1/2 . g . √(2h/g)²
x = 550 . √(2h/g) + h
the distance traveled is ( 550 . √(2h/g) + h )miles.
Find more on uniform motion at: https://brainly.com/question/28040370
#SPJ4
a piston-cylinder apparatus has a 4 kg piston with a diameter of 5 cm resting on a body of water 60 cm high. atmospheric pressure is 101 kpa, and the temperature of the water is 250˚c. what is the mass of water in the container?
The mass of the water in the container is 10,104.00 kg.
A schematic diagram of a piston-cylinder apparatus is shown in the adjoining image.
In the above case, the atmospheric pressure applied by the piston and the weight of the piston should balance the weight of the water inside the container
Hence,
Atmospheric Pressure x Area of Piston + Mass of piston x g = Mass of water x g
101 x 10^3 x pi x (2.5 x 10^-2)^2 + 4 x 10 = Mass of water x 10
Mass of water x 10 = 101,040.001
Mass of Water = 101,040.001/10
Mass of Water = 10,104 kg
Hence, the mass of the water in the container is 10,104.00 kg.
To know more about the "piston-cylinder apparatus", refer to the link given below:
brainly.com/question/13999257?referrer=searchResults
#SPJ4
Effect of Solvent:
1. Record the results.
1. H₂O =
2. alcohol =
3. glycerin =
2. In which liquid is the salt most soluble?
3. Using the concept of "Like dissolves like," explain why you got the results you did.
4. Explain how the choice of solvent affects the dissolving process.
1. H2O- The water completely dissolved the salt.
Alcohol- The alcohol dissolved the salt slightly.
Glycerin-The salt has not dissolved at all.
2. Water
3. Like dissolve like basically works on the principle of polarity. It means the substances which possess similar chemical properties may dissolve in each other. For example, ethanol can be dissolved in water because both are polar in nature whereas non-polar molecules can be dissolved in non-polar solvents only.
4. Generally, a solute dissolves faster in a warmer solvent than it does in a cooler solvent because particles have more energy of movement. For example, if you add the same amount of sugar to a cup of hot tea and a cup of iced tea, the sugar will dissolve faster in the hot tea.
Learn more about The choice of solvent here:-https://brainly.com/question/14918321
#SPJ9
Answer:
this guy right but this is only part 1
Explanation:
Will the velocity of an object change when moving across a surface with NO friction? Explain?
This question is very complicated.
But the short answer is: NoYou see to determine wether an object's velocity changes, we would look at if that object is accelerating or not, that is the literal definition of acceleration.
Newton's second Law of motion suggests that:
[tex]f = ma[/tex]
where f and a are vectors, meaning that a change in direction could mean that the velocity of an object has changed.
If an object is not subjected to friction, it could be subjected to other forces like drag,air resistance,ect... these are called resistive forces.
To make this simpler for you, if you mean that will no friction imply that the speed will minimally change then YES absolutely.
But if you mean that if the object is subjected to no friction (not resistive forces), will that object maintain a constant velocity (speed+direction), probably NOT.
a model sphere of diameter d is to be immersed in a water tunnel running at a speed of v in order to obtain data that can be used to predict the drag force on a weather balloon that is traveling in air at 1.5 m/s. for a model diameter of 50 mm, the measurement of the drag force on the small sphere yields 3.78 n.
The drag force on the prototype balloon is - 405 km/hr .
Given:
2-m- = diameter satellite dish
81-km/hr = Y
0.4-m- = diameter model dish.
Reynolds number is essential for this, thus,
Vm Dm/vm = VD/v
(D is the diameter of the dish)
Vm = (vm/v) (D/Dm) Y
and if vm/v = 1, then
Vm = (2/0.4) (81)
= 405 km/hr
Thus, the correct answer is - 405 km/hr
What is drag force?A mechanical force is drag. It is created when a solid body interacts with and contacts a fluid (liquid or gas). It is not produced by a force field in the sense of a gravitational field or an electromagnetic field, in which two objects can interact without coming into touch with one another.
Take the drag on a ship going through the water or the drag on a plane flying through the air. Consequently, a drag force is the resistance force brought on by a body moving through a fluid like air or water.
To learn more about drag force from the given link:
brainly.com/question/12774964
#SPJ4
a horizontal 52-N force is needed to slide a 50 kg box across a flat surface at a constant velocity of 3.5 m/s. What is the coefficient of kinetic friction between the box and the floor?
The coefficient of kinetic friction between the box and the floor is 0.11.
What is coefficient of friction?Coefficient of friction is a measure of the amount of friction existing between two surfaces.
The coefficient of kinetic friction between the box and the floor is calculated as follows;
F - Ff = ma
where;
a is the acceleration of the boxm is mass of the boxFf is frictional forceF is applied forceF - μmg = ma
at a constant velocity, acceleration, a = 0
F - μmg = 0
F = μmg
μ = F/mg
μ = (52) / (50 x 9.8)
μ = 0.11
Thus, the coefficient of kinetic friction between the box and the floor is 0.11.
Learn more about coefficient of kinetic friction here: brainly.com/question/20241845
#SPJ1
What do you observe when holding your plastic shopping bag between the light source and the wall
when holding your plastic shopping bag between the light source and the wall we will observe a large shadow in a dark color on the wall.
When we hold the largest plastic shopping bag between the light source and the wall the plastic bag will block the light.
When an object blocks the light way light can't pass through that object and where the light can't pass there we will observe a dark shadow
So here we can say that when we hold a bag between light and wall we will observe a shadow
If the bag is transparent still will we can see a shadow but not as dark as before because when light passes through a transparent it will allow some light through it but not like other materials.
For more information on shadow click on the link below:
https://brainly.com/question/25748640
#SPJ4
if the student then moves backwards and returns to a position marked 20 meters another 7 seconds later, what is the displacement of the student from starting position?
The student returned to starting point hence the displacement is zero.
What is the displacement?The displacement refers to the distance that is covered in a specified direction. The difference between distance and displacement is that displacement is a vector quantity while distance is a scalar quantity.
If displacement is a vector quantity, it then follows that the direction must be taken into consideration when we are talking about the displacement of the body.
Looking at the fact that the student moves backwards and returns to a position marked 20 meters another 7 seconds later, it then follows that the student returned to starting point and that the displacement is zero.
Learn more about displacement:https://brainly.com/question/11934397
#SPJ1
Powerful people or powerful machines are simply people or machine which always does a lot of work. is this statement true or false? explain
FALSE - Not always.
Machines can do a lot of work, but if they can't do it quickly, they aren't necessarily efficient. In fact, two machines can perform the same task (that is, do the same job), but their power ratings can differ significantly.
We know that machines are man made objects. they work by the instructions given my the people which made them. machines are effective as they can do the work more precisely and effectively but it varies from machine to machine and it depends on a lot of factors.
Machines can do a lot of work until it is workable and it does not have any malfunctioning once it stops working it is not powerful or efficient
Learn more about Machines here https://brainly.com/question/2337612
#SPJ9
millikan determined the charge on the electron by studying the static charges on oil drops falling in an electric field. a student carried out this experiment using several oil drops fo
1.60×10⁻¹⁹ charge on the electron by studying the static charges on oil drops falling in an electric field
Solving :
Look at the charge differences between the droplets :
A->B: 1.55 x 10⁻¹⁹C
B->C: 1.66 x 10⁻¹⁹C
C->D: 1.501 x 0⁻¹⁹C
The charge difference between the droplets is essentially the same from one droplet to the next. This must mean that there is a one particle difference between each drop (i.e. one additional electron for each drop)
On average, the charge difference is 1.55 x 10⁻¹⁹C, which is very close to the currently accepted value of 1.60 x 10⁻¹⁹C.
What was the aim of Millikan's oil drop experiment?
The Mil likens Oil Drop Experiment was an experiment performed by Robert A. Millikan and Harvey Fletcher in 1909 to live the charge of an electron. This experiment proved to be very crucial within the physics community.
Learn more about charge difference :
brainly.com/question/25923373
#SPJ4
Four toy cars are moving at a constant speed until they experience an unbalanced force of 12 n each. which toy car would have an acceleration of 3 m/s2 ? responses the car with a mass of 4 kg the car with a mass of 4 kg the car with a mass of 36 kg the car with a mass of 36 kg the car with a mass of 8 kg the car with a mass of 8 kg the car with a mass of 24 kg
Answer:
4 kg
Explanation:
F = ma
m = f/a = 12 N / 3 m/s^2 = 4 kg
What is the relationship between change in position and velocity?
Answer:
Position and velocity are both vector quantities. Because velocity is the rate of change of position with respect to time, there is a very close relationship between position and velocity. When the position remains constant, the corresponding velocity is zero because there is no change in position and the object is effectively at rest.
Explanation:
A softball player throws a pitch. during the throw, the speed of the softball increases from 0 m/s to 40 m/s in 0.08 seconds. the average acceleration of the ball is...
A softball player throws a pitch. during the throw, the speed of the softball increases from 0 m/s to 40 m/s in 0.08 seconds. The average acceleration of the ball is 500m/s^2
As we know that average acceleration is :
a= Δv/Δt
given:
v1=0 m/s
v2=40m/s
t=0.08 s
put the values in the formula
a= 40 - 0/0.08
a=500m/s^2
Thus the average acceleration is 500 m/s^2.
If you need to learn more about average acceleration, click here
https://brainly.com/question/15607536?referrer=searchResults
#SPJ4
By using uniform motion, the average acceleration is 500 m/s².
We need to know about the uniform motion to solve this problem. The uniform motion is an object's motion under acceleration. It should follow the rule
vt = vo + a . t
vt² = vo² + 2a . s
s = vo . t + 1/2 . a . t²
where vt is final velocity, vo is initial velocity, a is acceleration, t is time and s is displacement.
From the question above, we know that
vt = 40 m/s
vo = 0 m/s
t = 0.08 s
By substituting the given parameters, we can calculate the acceleration
vt = vo + a . t
40 = 0 + a . 0.08
a = 40/0.08
a = 500 m/s²
Find more on uniform motion at: https://brainly.com/question/28040370
#SPJ4
Consider a balloon of mass 0.030kg being inflated with a gas of density 0.54kg/m. What will be the volume of the balloon when it just begins to rise in the air of density 1.29kg/m3. (g=10m/s2) Detailed Explanation Please
the weight of the balloon is .030 * 10 = 0.3 N
the weight of the gas of volume v is 0.54*10 N
The lifting force of a volume of v m³ of displaced air is 1.29v N
so, we need
1.29*10*v = 0.3 + 0.54*10*v
or
1.29v = 0.03+0.54v
The volume of the balloon will be 0.056 m³ when it just begins to rise in the air.
What is volume?
A measurement of three-dimensional space is volume. Numerous imperial or US customary units, as well as SI-derived units (such the cubic metre and litre), are frequently used to quantify it numerically (such as the gallon, quart, cubic inch).
The definition of length (cubed) and volume are connected. The volume of a container is typically thought of as its capacity, or the amount of fluid (gas or liquid) that it could hold, as opposed to the amount of space the container occupies.
Mass of the balloon is = 0.030 kg.
Density of the gas inside the balloon is = 0.54 kg/m³
density of air outside the balloon is 1.29 kg/m³
Hence, volume of the balloon is = mass of the balloon ÷ density of the gas
= 0.030 kg ÷ 0.54 kg/m³
= 0.056 m³
Learn more about volume here:
https://brainly.com/question/13338592
#SPJ2
When you drop a 0.36 kg apple, Earth exerts
a force on it that accelerates it at 9.8 m/s2
toward the earth’s surface. According to Newton’s third law, the apple must exert an equal
but opposite force on Earth.
If the mass of the earth 5.98 × 1024 kg, what
is the magnitude of the earth’s acceleration
toward the apple?
Answer in units of m/s2
The magnitude of the earth’s acceleration toward the apple is -9.8m/s^2.
What is gravity?The term gravity refers to the attractive force that acts towards the center of the earth. We know that force is a vector quantity hence it has both magnitude and direction. Given this fact, the acceleration that this force produces also must have a magnitude and a direction.
In this case, we have been told that the a force on it that accelerates the apple at 9.8 m/s2 toward the earth’s surface. Recall that according to Newton's third law, the apple does exert a force that is equal in magnitude to the force of gravity.
The acceleration that is produced by the force is of the same magnitude but in opposite direction to that produced by gravity. Thus, the magnitude of the earth’s acceleration toward the apple is -9.8m/s^2.
Learn more about acceleration:https://brainly.com/question/12550364
#SPJ1
A small electric heater has a resistance of 15ohms when the current in it is 2 amperes. what voltage is required to produce this current.
A small electric heater has a resistance of 15ohms when the current in it is 2 amperes. what voltage is required to produce this current:V = IR, V = 2A x 15Ω, V = 30V.
What does voltage mean?The "pressure" that pushes electricity is referred to as voltage. A voltage is measured in volts (V), and greater voltages result in more electricity flowing to electronic equipment.Simply put, voltage—also known as an electromotive force—is the amount of energy in one charge. Voltage, then, is the variation in electric potential between two places. Simply put, the current is the pace at which electric charge flows.Customers are typically given 110 to 120 volts (AC) and 220 to 240 volts by power companies (AC). Typically between 110 and 1200 kV, the voltage of electric power transmission lines used to transfer electricity from power plants can be hundreds of times higher than consumer voltages (AC).A small electric heater has a resistance of 15ohms when the current in it is 2 amperes. What voltage is required to produce this current:
V = IR
V = 2A x 15Ω
V = 30V.
To learn more about voltage, refer to:
https://brainly.com/question/1176850
#SPJ4
How many moon diameters could you fit between
Earth and the moon?
Which object has the most thermal energy?
Gaseous substances have the highest thermal energy, followed by liquids and then solids under the same other conditions.
The total thermal energy of a substance is determined by its temperature, atomic composition, and physical condition. More thermal energy results from more atoms and a higher temperature.
Thermal energy, commonly known as internal energy, is the energy connected to microscopic types of energy in thermodynamics. Depending on the size of the system or the amount of chemical it contains, it is a sizable amount. The joule(J) is the SI unit for thermal energy. It is the energy in the system that is left after subtracting its collective kinetic energy and potential energy. The energy that results from rotation, vibration, motion, and interactions between molecules of matter are all examples of microscopic kinds of energy.Learn more about thermal energy here:
https://brainly.com/question/11278589
#SPJ9
Determine the time that a paper airplane will fly with an initial velocity of 3.5 m/s
A. 0.36 seconds
B. 2 seconds
C. 3 seconds
D. 0.5 seconds
The time taken for the paper airplane to fly with an initial velocity of 3.5 m/s is 0.36 s (Option A)
Given parameters:Considering the question given, the following data were obtained:
Initial velocity (u) = 3.5 m/sAcceleration due to gravity (g) = 9.8 m/s²Final velocity (v) = 0 m/s (at maximum height)Time (t) =? How do we determine the time?The time can be obtained as follow:
v = u - gt (airplane is going against gravity)
0 = 3.5 - (9.8 × t)
0 = 3.5 - 9.8t
Rearrange
-9.8t = 0 - 3.5
-9.8t = -3.5
Divide both sides by -9.8
t = -3.5 / -9.8
t = 0.36 s
Thus, we can conclude that the time taken for the airplane to fly is 0.36 s (Option A)
Learn more about motion under gravity:
https://brainly.com/question/22719691
#SPJ1
Name the element with 4 valence electrons and 6 energy shells
Answer:
Carbon
Explanation:
Carbon has 6 protons or the electron distribution (equal to protons) is equal to 2 in first energy shell and 4 in the outer energy shell. This makes the carbon atom look out for four electrons to fill it's octet.
Answer: Carbon
Explanation:
carbon has 4 valence electrons (in the outermost shell) and it has 6 energy shells (also known as electron shells)
1. How is an electromagnet different from other magnets?
O It can repel other magnets
It has poles
It is powered by electricity
O
O It attracts iron
An electromagnet different from other magnets as it is powered by electricity.
What is electromagnet ?An electromagnet is a type of magnet where an electric current creates the magnetic field. The wire that makes up an electromagnet is typically twisted into a coil. A magnetic field is produced by a current flowing through the wire and is concentrated in the hole, designating the center of the coil.
Electromagnets have a few drawbacks, including the fact that they heat up quickly and waste a lot of electrical energy as a result. The steady magnetic field must be maintained for a continuous power supply.
to learn more about the electromagnet go to -
https://brainly.com/question/12555869
#SPJ9
How does the frame of reference affect how an observer perceives motion?
A reference frame is a perspective from which you observe and measure things. Used to define the movement and position of objects. Two people can have different frames of reference for the same situation. In this case, they observe the movement and position of objects differently.
A reference frame is a perspective from which you observe and measure things. Used to define the movement and position of objects.
Two people can have different frames of reference for the same situation. In this case, they observe the movement and position of objects differently.
Units are a way of expressing measurements. It can consistently describe object velocity, mass, position, etc.
Scientists need to communicate their data clearly. They do this by sharing the units and frame of reference they use to measure.
Learn more about reference frame here https://brainly.com/question/10962551
#SPJ9
Which list of elements will behave similarly in a chemical reaction?
lithium (Li), boron (B), oxygen (O)
lithium (Li), sodium (Na) potassium (K)
sodium (Na), magnesium Mg), lithium (Li)
potassium (K), bromine (Br), krypton (Kr)
Answer:
I got you. its lithium (Li), sodium (Na) potassium (K)
Explanation:
They are all in the same group of the periodic table just look it up and look at group 1
What acceleration does it take to reach 15 m/s (from rest) in 5 seconds?
Answer:
The answer is simple….
As we know v = u + (a×t)
Where
v is the final velocity
u is the initialvelocity
a is the acceleration
t is the time taken
So according to the question:-
u=0, v=15 , a=3 and we have to find t…
So the equation is written as:-
15 = 0 + (3×t)
=> t = (15 ÷ 3) = 5
Therefore, the time required is 5 seconds..