Option B. Visitors enter the art gallery at the same rate as other visitors leave.
Answer:
B) Visitors enter the art gallery at the same rate as other visitors
leave.
Explanation:
A.P.E.X
Two balls are thrown against a wall with the same velocity. The first ball is made of rubber and bounces straight back with some non-zero speed. The second ball is made of clay and sticks to the wall after impact. If we assume the collision time was the same for each ball, which ball experienced a greater average acceleration during the collision with the wall? A. the average acceleration was the sameB. the clay ball C. there is not enough information D. the rubber ball
Answer:
A. the average acceleration was the same
Explanation:
Acceleration is calculated by finding the difference of the initial velocity from the final velocity (on impact, usually 0) and then dividing by the amount of time that took place. If we assume that both balls were thrown at the same initial force, and ended up hitting the wall at the same time then we can say that the average acceleration was the same. If the initial velocity was not the same then we would need the initial velocity of each ball in order to calculate the acceleration of each object and determine which had a greater acceleration.
How do projectors project the color black?
Answer:
Projectors do not project the color black. This makes sense since black is really the absence of light, and you can't project something that does not exist. When a projector sends a beam of light on to a wall or a projector screen so that an image is formed on the wall or screen, the parts of the image that look black are really a very dim white color (which we sometimes call gray). - wtamu
Answer is:
Projectors do not project the color black.
On a level test track, a car with antilock brakes and 90% braking efficiency is determined to have a theoretical stopping distance (ignoring aerodynamic resistance) of 408 ft (after the brakes are applied) from 100 mi/h. The car is rear-wheel drive with a 110-inch wheelbase, weighs 3200 lb, and has a 50/50 weight distribution (front and back), a center of gravity that is 22 inches above the road surface, an engine that generates 300 ft-lb of torque, and overall gear reduction of 8.5 to 1 (in first gear), a wheel radius of 15 inches and a driveline efficiency of 95%. What is the maximum acceleration from the rest of this car on this test track
Answer:
a = 30.832 ft/s²
Explanation:
To solve this problem let's start by finding the braking acceleration using kinematics, where the distance is x = 408 ft, the initial velocity vo = 100 mi / h and the final velocity is zero v = 0
v² = v₀² - 2 a x
0 = v₀² - 2ax
a = [tex]\frac{v_o^2}{2x}[/tex]
Let's start by reducing the magnitudes to ft / s
v₀ = 100 mi / h (5280 foot / 1 mile) (1h / 3600 s) = 146.666 ft / s
let's calculate
a = [tex]\frac{146.66^2}{2 \ 408}[/tex]
a = 26.36 ft / s²
Let's call this acceleration a_effective, this acceleration is in the opposite direction to the speed of the vehicle.
Let's use a rule of three (direct proportions) to find the acceleration applied by the brake system (a1) which has an efficiency of 95%. or 0.95
a₁ = [tex]\frac{a_e}{0.95}[/tex]
Let's use another direct proportion rule If the acceleration of the brake system (a₁) for an applied acceleration (a) with an efficiency of 0.90
a = [tex]\frac{a_1}{0.90}[/tex]
we substitute
a = [tex]\frac{a_e}{0.95 \ 0.90}[/tex]
let's calculate
a = [tex]\frac{26.36}{ 0.95 \ 0.90}[/tex]
a = 30.832 ft/s²
This is the maximum relationship that the vehicle can have for when it brakes to stop at the given distance
A constant torque of 3 Nm is applied to an unloaded motor at rest at time t = 0. The motor reaches a speed of 1,393 rpm in 4 s. Assuming the damping to be negligible, calculate the motor inertia in Nm·s2.
Answer:
The moment of inertia of the motor is 0.0823 Newton-meter-square seconds.
Explanation:
From Newton's Laws of Motion and Principle of Motion of D'Alembert, the net torque of a system ([tex]\tau[/tex]), measured in Newton-meters, is:
[tex]\tau = I\cdot \alpha[/tex] (1)
Where:
[tex]I[/tex] - Moment of inertia, measured in Newton-meter-square seconds.
[tex]\alpha[/tex] - Angular acceleration, measured in radians per square second.
If motor have an uniform acceleration, then we can calculate acceleration by this formula:
[tex]\alpha = \frac{\omega - \omega_{o}}{t}[/tex] (2)
Where:
[tex]\omega_{o}[/tex] - Initial angular speed, measured in radians per second.
[tex]\omega[/tex] - Final angular speed, measured in radians per second.
[tex]t[/tex] - Time, measured in seconds.
If we know that [tex]\tau = 3\,N\cdot m[/tex], [tex]\omega_{o} = 0\,\frac{rad}{s }[/tex], [tex]\omega = 145.875\,\frac{rad}{s}[/tex] and [tex]t = 4\,s[/tex], then the moment of inertia of the motor is:
[tex]\alpha = \frac{145.875\,\frac{rad}{s}-0\,\frac{rad}{s}}{4\,s}[/tex]
[tex]\alpha = 36.469\,\frac{rad}{s^{2}}[/tex]
[tex]I = \frac{\tau}{\alpha}[/tex]
[tex]I = \frac{3\,N\cdot m}{36.469\,\frac{rad}{s^{2}} }[/tex]
[tex]I = 0.0823\,N\cdot m\cdot s^{2}[/tex]
The moment of inertia of the motor is 0.0823 Newton-meter-square seconds.
A wave in which the movement of the wave is perpendicular to the movement of the wave traveling through the medium-compression wave (longitudinal wave)
True or false?
Answer:
I'm rusty sorry if I'm wrong but true?
A cylindrical resistor element on a circuit board dissipates 1.2 W of power. The resistor is 2 cm long, and has a diameter of 0.4 cm. Assuming heat to be transferred uniformly from all surfaces, determine (a) the amount of heat this resistor dissipates during a 24-hour period, (b) the heat flux, and (c) the fraction of heat dissipated from the top and bottom surfaces.
Answer:
(a) The resistor disspates 103680 joules during a 24-hour period.
(b) The heat flux of the resistor is approximately 4340.589 watts per square meter.
(c) The fraction of heat dissipated from the top and bottom surfaces is 0.045.
Explanation:
(a) The amount of heat dissipated ([tex]Q[/tex]), measured in joules, by the cylindrical resistor is the power multiplied by operation time ([tex]\Delta t[/tex]), measured in hours. That is:
[tex]Q = \dot Q \cdot \Delta t[/tex] (1)
If we know that [tex]\dot Q = 1.2\,W[/tex] and [tex]\Delta t = 86400\,s[/tex], then the amount of heat dissipated by the resistor is:
[tex]Q = (1.2\,W)\cdot (86400\,s)[/tex]
[tex]Q = 103680\,J[/tex]
The resistor disspates 103680 joules during a 24-hour period.
(b) The heat flux ([tex]Q'[/tex]), measured in watts per square meter, is the heat transfer rate divided by the area of the cylinder ([tex]A[/tex]), measured in square meters:
[tex]Q' = \frac{\dot Q}{A}[/tex] (2)
[tex]Q' = \frac{\dot Q}{\frac{\pi}{2}\cdot D^{2}+\pi\cdot D \cdot h }[/tex] (3)
Where:
[tex]D[/tex] - Diameter, measured in meters.
[tex]h[/tex] - Length, measured in meters.
If we know that [tex]\dot Q = 1.2\,W[/tex], [tex]D = 4\times 10^{-3}\,m[/tex] and [tex]h = 2\times 10^{-2}\,m[/tex], the heat flux of the resistor is:
[tex]Q' = \frac{1.2\,W}{\frac{\pi}{2}\cdot (4\times 10^{-3}\,m)^{2}+\pi\cdot (4\times 10^{-3}\,m)\cdot (2\times 10^{-2}\,m) }[/tex]
[tex]Q' \approx 4340.589\,\frac{W}{m^{2}}[/tex]
The heat flux of the resistor is approximately 4340.589 watts per square meter.
(c) Since heat is uniformly transfered, then the fraction of heat dissipated from the top and bottom surfaces ([tex]r[/tex]), no unit, is the ratio of the top and bottom surfaces to total surface:
[tex]r = \frac{\frac{\pi}{2}\cdot D^{2}}{A}[/tex] (3)
If we know that [tex]A \approx 2.765\times 10^{-4}\,m^{2}[/tex] and [tex]D = 4\times 10^{-3}\,m[/tex], then the fraction is:
[tex]r = \frac{\frac{\pi}{2}\cdot (4\times 10^{-3}\,m)^{2} }{2.765\times 10^{-4}\,m^{2}}[/tex]
[tex]r = 0.045[/tex]
The fraction of heat dissipated from the top and bottom surfaces is 0.045.
PLEASE HELP! THIS IS TO BE TURNED IN IN ABOUT 3 MINUTES!!!!!!!
How must the net force be acting on an object in order for the object to have a circular motion? What is this type of force called?
A major source of water pollution comes from that washes chemicals and other pollutants from improperty managed land.
Identify the independent variable(s) in Asch's original experiment.
Answer:
How do I answer this I don't understand the question
Explanation:
A transformer has 1500 turns on the primary coil and 30 000 turns on the secondary coil. What is the potential difference across the secondary coil, if the primary coil has a potential difference of 20 000V?
please help :/
Answer:
turle
Explanation:
A heat pump is used to heat a building. The external temperature is lower than the internal temperature. The pump's coefficient of performance is 3.70, and the heat pump delivers 7.27 MJ as heat to the building each hour. If the heat pump is a Carnot engine working in reverse, at what rate must work be done to run it
Answer:
Heat pump needs 1.965 megajoules each hour to run.
Explanation:
The Coefficient of Performance ([tex]COP[/tex]), no unit, of a Carnot's heat pump is:
[tex]COP = \frac{Q_{H}}{W}[/tex] (1)
Where:
[tex]Q_{H}[/tex] - Heat received by the building, measured in megajoules.
[tex]W[/tex] - Work needed to run the heat pump, measured in megajoules.
If heat pump is a Carnot engine working in reverse, then the amount of work needed to run the heat pump is the least possible work. If we know that [tex]Q_{H} = 7.27\,MJ[/tex] and [tex]COP = 3.70[/tex], then the amount needed by the heat pump each hour is:
[tex]W = \frac{Q_{H}}{COP}[/tex]
[tex]W = \frac{7.27\,MJ}{3.70}[/tex]
[tex]W = 1.965\,MJ[/tex]
Heat pump needs 1.965 megajoules each hour to run.
What is the period, in seconds, that corresponds to each of
the following frequencies: (a) 10 Hz, (b) 0.2 Hz, (c) 60 Hz?
Answer:
0.1s,5s,0.017s
Explanation:
T=1÷frequency
Answer:
a =
✔ 6
The period is
✔ 2 seconds.
b =
✔ pi
Explanation:
Graph the function using the graphing calculator. Find the least positive value of t at which the pendulum is in the center.
t =
✔0.5 sec
To the nearest thousandth, find the position of the pendulum when t = 4.25 sec.
d =
✔ 4.243 in.
Does fg increase or decrease when one mass increases
Answer:
It increases because fg means Force of gravity so When the mass of the two objects increases with mass and increases the distance between an object
There you go!!!
1. li took 2 } seconds for a car's vclocity to change from 20 m/s to 15 m/s. The mass of the car was 1370 kg. What force was required to cause the acceleration? (Hint: First calculate the acceleration.
Answer:
Do you still need help??
Explanation:
At what latitude are there almost no differences between the seasons? Explain
why this occurs?
Answer:
The four-season year is typical only in the mid-latitudes. The mid-latitudes are places that are neither near the poles nor near the Equator. The farther north you go, the bigger the differences in the seasons.
Explanation:
hope this helps have a good day :) ❤
At a latitude equal to zero degrees there is little seasonal variation. This phenomenon is due each day the Sun's rays strike the Earth's surface at approximately the same angle near the Equator.
The Equator is the line of 0° (zero degrees) latitude around the middle of the Earth.
Moroever, the intensity of solar radiation and therefore also the temperature at the Earth's surface largely depends on the angle of incidence of the Sun's rays.
At 0° latitude, there is a very little seasonal variation because all days the Sun's rays strike the Earth's surface at approximately the same angle. At the Equator, the Sun's rays strike the Earth's surface at an angle of 90°, causing warmer temperatures compared to higher latitudes.
In additon, at 0° latitude, all days also have the same number of hours of light and dark (i.e., approximately 12 hours of sunlight).
In conclusion, at a latitude equal to zero degrees (i.e., at the Equator) there is little seasonal variation. This phenomenon is due each day the Sun's rays strike the Earth's surface at approximately the same angle near the Equator.
Learn more in:
https://brainly.com/question/744653
Can Magnetic poles effects each other
Answer:
Explanation:
But the reality is that: Multiple magnetic fields would fight each other. This could weaken Earth's protective magnetic field by up to 90% during a polar flip. Earth's magnetic field is what shields us from harmful space radiation which can damage cells, cause cancer, and fry electronic circuits and electrical grids.
How do magnetic poles interact? Magnetic poles that are alike repel each other, and magnetic poles that are unlike attract each other. The area of magnetic force around a magnet. The magnetic field lines spread out from the north pole, curve around, and return to the south pole.
When two magnets are brought together, the opposite poles will attract one another, but the like poles will repel one another. This is similar to electric charges. The earth is like a giant magnet, but unlike two free hanging magnets, the north pole of a magnet is attracted to the north pole of the earth.
Magnetic forces are non contact forces; they pull or push on objects without touching them. Magnets are only attracted to a few 'magnetic' metals and not all matter. Magnets are attracted to and repel other magnets.
(hope this helps can i plz have brainlist :D hehe)
Before working this problem, review Conceptual Example 14. A pellet gun is fired straight downward from the edge of a cliff that is 14.7 m above the ground. The pellet strikes the ground with a speed of 27.2 m/s. How far above the cliff edge would the pellet have gone had the gun been fired straight upward
Answer:
23.04 m
Explanation:
We'll begin by calculating the initial velocity of the pellet. This can be obtained as follow:
Height (h) of cliff = 14.7 m
Final velocity (v) = 27.2 m/s
Acceleration due to gravity (g) = 9.8 m/s²
Initial velocity (u) =?
v² = u² + 2gh
27.2² = u² + (2 × 9.8 × 14.7)
739.84 = u² + 288.12
Collect like terms
u² = 739.84 – 288.12
u² = 451.72
Take the square root of both side
u = √451.72
u = 21.25 m/s
Thus, the initial velocity of the pellet is 21.25 m/s.
Finally, we shall determine the maximum height to which the pellet would have gone assuming the gun was fired straight upward. This can be obtained as follow:
Initial velocity (u) = 21.25 m/s
Acceleration due to gravity (g) = 9.8 m/s²
Final velocity (v) = 0 m/s (at maximum height)
Maximum height (h) =?
v² = u² – 2gh (since the pellet is going against gravity.
0² = 21.25² – (2 × 9.8 × h)
0 = 451.5625 – 19.6h
Collect like terms
0 – 451.5625 = –19.6h
–451.5625 = –19.6h
Divide both side by –19.6
h = –451.5625 / –19.6
h = 23.04 m
Therefore, the pellet will reach a maximum height of 23.04 m above the cliff.
INT Raindrops acquire an electric charge as they fall. Suppose a 2.0-mm-diameter drop has a charge of 12 pC; these are both very common values. In a thunderstorm, the electric field under a cloud can reach 15,000 N/C, directed upward. For a droplet exposed to this field, how do the magnitude and direction of the electric force compare to those of the weight force
Answer:
W = 2.3 10² [tex]F_{e}[/tex]
Explanation:
The force of the weight is
W = m g
let's use the concept of density
ρ= m / v
the volume of a sphere is
V = [tex]\frac{4}{3}[/tex] π r³
V = [tex]\frac{4}{3}[/tex] π (1.0 10⁻³)³
V = 4.1887 10⁻⁹ m³
the density of water ρ = 1000 kg / m³
m = ρ V
m = 1000 4.1887 10⁻⁹
m = 4.1887 10⁻⁶ kg
therefore the out of gravity is
W = 4.1887 10⁻⁶ 9.8
W = 41.05 10⁻⁶ N
now let's look for the electric force
F_e = q E
F_e = 12 10⁻¹² 15000
F_e = 1.8 10⁻⁷ N
the relationship between these two quantities is
[tex]\frac{W}{F_e}[/tex] = 41.05 10⁻⁶ / 1.8 10⁻⁷
\frac{W}{F_e} = 2,281 10²
W = 2.3 10² [tex]F_{e}[/tex]
therefore the weight of the drop is much greater than the electric force
3. A car has a mass of 1,000 kilograms. If a net force of 2,000 N is exerted on the car, what is its acceleration?
Answer:
2 m/s^2
Explanation:
Acceleration = Force/mass
= 2,000/1,000
= 2
An 80 N rightward force is applied to a 10 kg object to accelerate it to the right.
The object encounters a friction force of 50 N.
net force = 30 N
mass = 8.16 kg
acceleration = 3.68 m/s²
Further explanationGiven
80 N force applied
mass of object = 10 kg
Friction force = 50 N
Required
Net force
mass
acceleration
Solution
net forceNet force = force applied(to the right) - friction force(to the left)
Net force = 80 - 50 = 30 N
massGravitational force(downward) : F = mg
m = F : g
m = 80 : 9.8
m = 8.16 kg
accelerationa = F net / m
a = 30 / 8.16
a = 3.68 m/s²
The moon accelerates because it is
A. in a vacuum in space.
B. continuously changing direction.
C. a very large sphere.
D. constantly changing its shape.
Answer:
the Answer is b
Explanation:
because the moon usually orbits around our solar system
As the moon continuously changing direction, it accelerates.
Option B. is correct.
Define acceleration.The rate at which an object's velocity changes with respect to time is called acceleration. Accelerations are measured in terms of vectors. The orientation of the net force acting on an object determines the orientation of its acceleration.
The Moon is kept in orbit around us by the gravity of the Earth. It constantly shifting the Moon's velocity direction. This means that, despite its constant speed, gravity causes the Moon to accelerate all the time.
So, as the moon continuously changing direction, it accelerates.
Option B. is correct.
Find out more information about acceleration here:
https://brainly.com/question/2437624?referrer=searchResults
Although the vocal tract is quite complicated, we can make a simple model of it as an open-closed tube extending from the opening of the mouth to the diaphragm, the large muscle separating the abdomen and the chest cavity. What is the length of this tube if its fundamental frequency equals a typical speech frequency of 230 Hz? Assume a sound speed of 350 m/s.
Answer:
0.76m
Explanation:
Given data
Frequency= 230Hz
speed= 350m/s
Since we are told that the frequency is the fundamental frequency n= 1
For a standing wave
Fn= nv/2L
n= 1
230= 1*350/2*L
230= 350/2L
cross multiply
2L= 350/230
2L=1.521
L=1.521/2
L=0.76m
Hence the length is 0.76m
A 0.75 kg golf ball is being launched from the ground. What is its potential energy
Explanation:
the question it's not complete as I don't know the height as the formula for potential energy is : PE = mgh
(m) - mass acceleration due to gravity
(g) - acceleration due to gravity (9.8 m/s2)
(h) - height
The height (in centimeters) at time t (in seconds) of a small mass oscillating at the end of a spring is h(t)=5sin(2πt). Estimate its instantaneous velocity at t=3
Answer:
h (3) = 0
Explanation:
In this exercise they give us the expression that governs the movement
h (t) = 5 sin (2πt)
remember that the angles are in radians.
To calculate the instantaneous velocity we substitute
h (3) = 5 sin (2π 3)
h (3) = 0
therefore the body this is its position of equilibrium
Substance X is in a chamber (Chamber 1) containing 10L of fluid. The concentration of substance X in this chamber is 100mmol/L. A solid division separates this chamber from another chamber (Chamber 2) containing 5L of fluid. You remove this division leaving only a membrane separating the two chambers. This membrane is permeable to Substance X and nothing else. Which of the following statements are true?There are several answers to this question, but only one is giving me issues. One of the correct answers is: "The concentration of Substance X in Chamber 2 will never exceed 66mmol/L." I do not understand how they got this as I did a ratio and came up with 50 mmol/L instead. Could someone please point out how it is 66?
Answer:
Explanation:
concentration of substance X in chamber 1 = 100 mmol/L
total volume of chamber 1 = 10 L
total mass of substance X in chamber 1 = 100 x 10 mmol = 1000 mmol .
When the two chamber is joined , total volume of both the chamber
= 10 L + 5 L = 15 L .
In the volume of 15 litre , substance x is uniformly distributed because it is permeable .
concentration of substance X = mass of X / total volume = 1000 mmol / 15
= 66.67 mmol / L
Hence ,
"The concentration of Substance X in Chamber 2 will never exceed 66mmol/L."
Climbing a tree would
A. decrease your potential energy
B. increase your kinetic energy
C. increase your potential energy
Answer:
C Increase your potential energy
Explanation:
Because if you start falling your potential energy would convert to kinetic energy. So you would get potential energy climbing up a tree
Answer:
I think it's potential energy
How much force does it take to give a 70 kg object an acceleration of 20 mls2
Answer:
heyy
Explanation:how r uuu
Surface Features on earth combine to form the(blank) or area ,Will mark brainliest if someone give’s me the word that fit’s in there.
The plates of a parallel plate capacitor each have an area of 0.40 m2 and are separated by a distance of 0.02 m. They are charged until the potential difference between the plates is 3000 V. The charged capacitor is then isolated. Determine the magnitude of the electric field between the capacitor plates.
Answer:
E = -1.5 10⁵ N / C
Explanation:
In a capacitor the electric field is uniform between the blades, therefore we use the expression
V = - E s
E = - V / s
let's calculate
E = - 3000 / 0.02
E = -1.5 10⁵ N / C
the sign indicates that the field and the potential are opposite, when one increases the gold decreases
Renee looks out a window. The window is clear, or transparent. This means most of the light that hits the window is:
А
scattered
B
reflected
с
transmitted
D
absorbed
Answer:
the answer is transmitted
Explanation: