Time taken by the space shuttle to increase its velocity from 6,000 m/s up to 7,000 m/s is 33.33 s .
Given ,
a = 30 m / s ²
u = 6,000 m / s
v = 7,000 m / s
Here ,
' a ' represents acceleration
' u ' represents initial velocity
' v ' represents final velocity
a = ( v - u ) / t
t = ( v - u ) / a
t = ( 7000 - 6000 ) / 30
t = 1000 / 30
t = 33.33 s
Hence , time taken by the space shuttle to increase its velocity from 6,000 m/s up to 7,000 m/s is 33.33 s .
To learn more about acceleration , kindly check :
https://brainly.com/question/605631
#SPJ9
Please help if I dont get this I have two packets for hw. As the universe expands the temperature ______ and the wavelengths of photons ______.
As the universe expands the temperature decreases and the wavelengths of photons increases.
Effect of expansion of the universe on the wavelength of light?
As the universe expands, the distance between crests of the wave of light also expand, causing the wavelength to increase.
Light with a longer wavelength is redder, so light appears redshifted because of the expansion of the universe.
Also, the universe expands as a result of decrease in the temperature of surrounding air molecules according to Hubble.
Thus, we can conclude that, as the universe expands the temperature decreases and the wavelengths of photons increases.
Learn more about expansion of universe here: https://brainly.com/question/3890321
#SPJ1
A green car travels on the highway at 12 m/s. A red car is behind the green car and traveling at 19 m/s. If it takes the red car 2 minutes to catch the green car, how far apart were they to begin with?
For the reason that the green car's initial velocity and acceleration are equal in both instances, it follows that you could use the time the pink automobile wishes to attain those two factors to write two equations with unknowns, the inexperienced vehicle's.
V0=-14.56m/s
a=-4.96m/s²
A red automobile and an inexperienced car flow in the direction of each different in adjacent lanes and parallel to an x-axis.
At time t = zero, the purple vehicle is at
XR = 0 and the green vehicle is at
Xg = 216 m.
If the red vehicle has a constant velocity of 27.0 km/h, the motors bypass every difference at x = 44.2 m. then again, if the red automobile has a steady velocity of fifty-four. 0 km/h, they skip every difference at
x = 76.7 m.
Learn more about velocity here
https://brainly.com/question/25749514
#SPJ9
Light with a frequency of 7. 30 x 10^14 hz lies in the violet region of the visible spectrum. What is the wavelength of this frequency of light?.
Light with a frequency of 7. 30 x 10^14 hz lies in the violet region of the visible spectrum. The wavelength of this frequency of light is 4×10^-7 m.
As we know
c = λf
where
c is the speed of light, λ is wavelength and f is frequency.
Given:
c = 3×10^8
f=7.3×10^14
Putting the values
λ = c/f
λ = 3×10^8/7.3×10^14
λ = 4×10^-7 m.
The wavelength is 4×10^-7 m.
If you need to learn more about wavelength of light, click here
https://brainly.com/question/19067399?referrer=searchResults
#SPJ4
you are exploring a newly discovered planet. the radius of the planet is 7.40 × 107 m. you suspend a lead weight from the lower end of a light string that is 4.00 m long and has mass 0.0280 kg. you measure that it takes 0.0605 s for a transverse pulse to travel from the lower end to the upper end of the string. on earth, for the same string and lead weight, it takes 0.0320 s for a transverse pulse to travel the length of the string. the weight of the string is small enough that its effect on the tension in the string can be neglected.
The mass of the Other planet is 2.81 x 10²⁶ m for the given parameters.
What does the mass of a planet mean?In astronomy, the term "planetary mass" refers to the measurement of an object's mass that resembles a planet. The mass of the Sun, solar mass (M), is used as the unit of mass in the astronomical system of units, which is frequently used to estimate the sizes of planets in the Solar System.
Given,
The radius of the other planet is 7.40 x 10(7) meters.
String mass is M=0.028kg.
The string's length is L=4m.
Time (Tp) = 0.0605 seconds on other planets.
Te is the same as 0.0320 seconds.
Locating lead on Earth should be the first step.
This is the equation for linear mass density:
μ = M/L = 0.028/4 = 0.007 Kg/m
In this case, the wave's speed is given by the equation Ve = L/t = 4/0.032 = 125 m/s.
The formula produces the tension of the spring (Fe);
Fe = (Ve)2 = 0.007 x 125 = 0.87 N
The findings of applying Newton's second rule of motion to this earth lead are as follows:
0 if Fy = Fe-Wl.
Fe - W(l) = 0, which leads to Fe = W. (l)
We know that Weight(W) = Mg.
Me = M(l)g, so Fe.
Where M(l) is the mass of the lead, and g is the acceleration brought on by gravity on earth, which is 9.81.
As a consequence, M(l) = Fe/g = 0.875/9.81 = 0.089kg.
Use the same method to calculate the lead on the second planet;
The linear density of a material is a property that doesn't change:
μ = 0.007 Kg/m
In this case, the wave's velocity is given by the equation Vp = L/t = 4/0.0605 = 66.11 m/s.
The formula produces the tension of the spring (Fp);
Fp = (Vp)2, which equals 30.59 N or 0.007 x 66.112 N.
The findings of applying Newton's second rule of motion to this earth lead are as follows:
Fy = Fp – Wl = 0
As a consequence, Fe - W(l) = 0 and Fp = W. (l)
We know that weight(W) equals mass (Mg) (p)
Consequently, Fp = M(l)g (p)
where M(l) is the mass of the lead and g(p) is the acceleration brought on by the gravity of the other planet.
As a consequence, gp = Fp/M(l) = 30.59/0.089 = 343.70 m/s2.
The planet's acceleration may be calculated using the gravity equation using the formula g = (GM)/r2.
As M is the subject, we have;
(gr²)/G = M
Gravitational constant G has a value of 6.6742 x 10(-11) Nm2/kg2.
M is the planet mass.
the planet's radius r
Thus;
M = [343.70 x (7.4 x 10^(7))²] / 6.6742 x 10^(-11)
Mass = 2.81 x 10^(26)m
Complete Question -You are exploring a newly discovered planet. The radius of the planet is 7.20 × 107 m. You suspend a lead weight from the lower end of a light string that is 4.00 m long and has mass 0.0280 kg. You measure that it takes 0.0685 s for a transverse pulse to travel from the lower end to the upper end of the string. On earth, for the same string and lead weight, it takes 0.0370 s for a transverse pulse to travel the length of the string. The weight of the string is small enough that its effect on the tension in the string can be neglected.
Part A
Assuming that the mass of the planet is distributed with spherical symmetry, what is its mass?
Express your answer with the appropriate units.
To learn more about mass of the planet from given link
https://brainly.com/question/15071388
#SPJ4
How much force is needed to stop a 100-kg football player if she negatively accelerates (decelerates) at 20 m/s2? responses 5 n 5 n 20 n 20 n 200 n 200 n 2000 n
200N force is needed to stop a 100-kg football player if she negatively accelerates (decelerates) at 20 m/s2
we have given in the statement
mass=100kg
acc= -20m/s^2
F=?
from newton's formula, we will find force
F=ma
F=100kg×20m/s^2
F=200N
The SI unit of force is the Newton. It is described as the force that propels a mass of 1 kilogram at an acceleration of 1 meter per second squared. Its sign is the capital N, which is expressed as 1N=1 kg m s2.A body's rate of linear momentum change is directly proportional to the applied force, and the change occurs in the direction of the applied force. An illustration of this relationship is When a truck and a vehicle are pushed with the same effort, it is noticeable that the automobile accelerates more quickly than the truck since its mass is lower.To know more about force visit : https://brainly.com/question/1675020
#SPJ1
An interior designer is choosing a paint color for a room and has two samples that are both blue, however one blue is described as brighter than the other. Both would have the same wavelength, but would differ based on what physical property of light?.
An interior designer is choosing a paint color for a room and has two samples that are both blue, however one blue is described as brighter than the other. Both would have the same wavelength but would differ due to the amplitude property of light.
The amplitude plays an important part in differentiating the same colors of the same wavelength. It tells us about the brightness or intensity of a certain light wave as compared to others of the same wavelength. So, whenever two same colors look different due to brightness, it is due to the amplitude property of the light.
If you need to learn more about wavelength of light, click herebrainly.com/question/28198302?referrer=searchResults
#SPJ4
jupiter has a mass of approximately . jupiter’s moon ganymede has a mass of approximately and it orbits jupiter at a distance of approximately . calculate the approximate magnitude of the attractive gravitational force between ganymede and jupiter.
The approximate magnitude of the gravitational force between Ganymede and Jupiter is 16.35 x 10^21 N.
According to Newton’s Law of Gravitation, the gravitational force between two bodies is directly proportional to the masses of the two objects and is inversely proportional to the square of the distance between them.
The above statement can be represented by the following equation:
F = Gx (m1)x (m2)/r^2
Here G = Universal Gravitational Constant = 6.67 x 10^-11 N m^2/kg^2
m1 and m2 are the masses of two bodies
r is the distance between the bodies
Putting m1= Mass of Jupiter= 1.89 x 10^27 kg
m2 =Mass of Ganymede 1.48 x 10^23 kg
r = Distance between Jupiter and Ganymede = 1.07 x 10^9 meters
F = 6.67 x 10^-11 x 1.89 x 10^27 x 1.48 x 10^23/(1.07 x 10^9)^2
On solving the above equation F comes out to be 16.35 x 10^21 N.
Thus, the approximate magnitude of the gravitational force between Ganymede and Jupiter is 16.35 x 10^21 N.
To know more about "Law of Gravitation", refer to the link given below:
brainly.com/question/24190879?referrer=searchResults
#SPJ4
URGENT!! ILL GIVE BRAINLIEST! AND 100 POINTS
If Janie puts her hand on a cold metal doorknob, how will thermal energy move?
Answer:
Metal appears cool on touching because heat flows from body( at higher temperature) to iron( at lower temperature)
a car is travelling to the right with a speed of 42 m/s when the driver slams on the brakes. the car skids for 4 s with constant acceleration before it comes to a stop. what distance does the car travel as it skids to a stop?
The car that travels to the proper with a speed of 42 m/s, skids 84 meters for 4 seconds before it involves a stop.
Solving :
The distance traveled by car before coming to a stop can be calculated with the following equation:
[tex]v^{2} f_{} =v^{2} i_{} + 2ad[/tex]
Where:
[tex]v_{f}[/tex]: is that the final speed = 0 (it stops)
[tex]v_{i}[/tex]: is that the initial speed = 42 m/s
a: is that the acceleration
d: is that the distance =?
We need to find the acceleration. we will use the next equation:
[tex]v_{f} = v_{i} +at[/tex] ...........2
Where:
t: is that the time = 4.0 s
Hence, the acceleration is:
a = [tex]\frac{v_{f} -v_{i} }{t}[/tex]
a = [tex]\frac{0-42m/s}{4.0s}[/tex]
a = - 10.5 m/s²
Now, the car skid the subsequent meters before coming to a stop (eq 1).
d = [tex]\frac{v^{2}_{f} - v^{2} _{f} }{2a}[/tex]
d = 84 m
Therefore, the car skids 84 meters before coming to a stop.
Constant acceleration :
Constant acceleration refers to motion where the speed increases by the identical amount each second. the foremost notable and important example is free fall. When an object is thrown or dropped, it experiences a continuing acceleration due to gravity, which features a constant value of approximately 10 meters per second squared
Learn more about constant acceleration :
brainly.com/question/27996125
#SPJ4
What is the purpose of a standard drink measurement? alcoholedu for college exam
The standard drink measurement should contain 14 grams of pure alcohol in United States of America.
What is the purpose of a standard drink measurement?
The standard drink measurement should contain 14 grams of pure alcohol in United States of America.
The standard drink measurement has a wide range of use in today's life because with the help of this an alcohol can be balanced in a consistent way.
So we can also conclude the standard drink measurement should contain 14 grams of pure alcohol in United States of America.
Learn more about Alcohol here: https://brainly.com/question/947751
#SPJ1
The standard drink measurement should contain 14 grams of pure alcohol in United States of America.
What is the purpose of a standard drink measurement?The standard drink measurement should contain 14 grams of pure alcohol in United States of America. The standard drink measurement has a wide range of use in today's life because with the help of this an alcohol can be balanced in a consistent way. In the United States, one "standard" drink contains about 14 grams of pure alcohol which is usually about 5% alcohol. We know that 5 ounces of wine, has about 12% alcohol, 1.5 ounces of distilled spirits which is 40% alcohol.
So we can also conclude the standard drink measurement should contain 14 grams of pure alcohol in United States of America.
Learn more about Alcohol here: brainly.com/question/947751
#SPJ1
An object is lifted from the surface of a spherical planet to an altitude equal to the radius of the planet. As a result, what happens to the mass and weight of the object?.
The mass of the object remains the same but the weight decreases as the object move upward.
Because mass is the amount of matter in an item and does not change with gravity, mass remains constant. If the amount of matter didn't change, it would stay the same. We can observe that this innate quality, mass, never changes and remains the same wherever we place it in the universe.
According to a new high-resolution map, a person can weigh differently depending on where they are on Earth due to changes in the planet's gravity. Many people believe that gravity is constant over the entire planet, however, scientists have shown that gravity varies because the planet is not perfectly spherical or uniformly dense.
Learn more about mass and weight here:
https://brainly.com/question/28122305?referrer=searchResults
#SPJ4
According to the law of multiple proportions, if 12 g of carbon combine with 16 g of oxygen to form co, the number of grams of carbon that combine with 16 g of oxygen in the formation of co2 is ________.
The number of grams of carbon that combine with 16 g of oxygen in the formation of CO₂ is 6g.
When two elements combine to make more than one compound, the masses of one element combined with a fixed amount of another element are in the ratio of whole numbers, according to the law of multiple proportions.
When combined with oxygen, carbon can produce two different compounds. They are referred to as carbon dioxide (CO₂) and carbon monoxide (CO).
Carbon monoxide is formed by combining 12 g of carbon with 16 g of oxygen whereas Carbon dioxide is formed when 12 g of carbon reacts with 32 g of oxygen. The amount of carbon is fixed at 12 g in each case. The mass ratio of carbon monoxide to carbon dioxide is 16: 32, or 1: 2.
But in the given case, 16g of oxygen is reacting instead of 32g. Therefore, the number of grams of carbon reacting will be:
[tex]\frac{12}{2}=6g[/tex]
Thus, 6g of carbon will react with 16g of oxygen to form carbon dioxide.
Read more about Law of Multiple Proportions:
https://brainly.com/question/13058110
#SPJ4
please answer show work
Answer:
speed =distance /time
10/4=2.5 m/s
In this lab, you will use a falling cylinder attached to a
propeller in a water bath to explore the conversion of
energy in a system. You will vary two different variables
and determine how each one affects the temperature of
the water. In the space below, write a scientific question
that you can answer by doing this experiment.
In a lab, while performing the experiment, one question that I will ask will be - How potential energy can be converted into thermal energy? The answer for tat will be by seeing and understanding the sample response in the experiment.
What separates potential energy from thermal energy?Potential energy is released from them when they are divided. A particle's potential energy increases with distance. As they gain speed, their kinetic energy increases. The thermal energy of an object is the sum of the kinetic and potential energies of all the particles.
What gives thermal energy its potential?Energy from heat transfer as potential and kinetic energy
This occurs as a result of the attractive forces they generate for one another. Additionally, the particles are forced apart by a rise in body temperature. As a result, as their potential energy rises, so do the forces of attraction between them.
To know more about Thermal energy and Potential energy visit:
https://brainly.com/question/12807194
#SPJ9
A science student is riding on a flatcar of a train traveling along a straight horizontal track at a constant speed of v1. The student throws a ball along a path that she judges to make an initial angle of θ with the horizontal and to be in line with the track. The student’s professor, who is standing on the ground nearby, observes the ball to rise vertically. How high does the ball rise?.
The ball rises to a height of s = ( [tex]V_{1}[/tex] tan θ )² / 2g m
[tex]V_{y}[/tex] / [tex]V_{x}[/tex] = tan θ
Here [tex]V_{y}[/tex] is the vertical velocity and [tex]V_{x}[/tex] is the horizontal velocity which is the velocity of train.
[tex]V_{y}[/tex] = [tex]V_{1}[/tex] tan θ ( θ is the angle of projection )
We know that,
a = [tex]V_{y}[/tex] / t
t = [tex]V_{y}[/tex] / a
where,
a = Acceleration due to gravity = g
t = Time
s = ut + 1 / 2 at²
s = 1 / 2 ( g ) ( [tex]V_{1}[/tex] tan θ / g )²
s = ( [tex]V_{1}[/tex] tan θ )² / 2g m
The height of a projectile is the distance of thrown object from the point where it is thrown vertically.
Therefore, the ball rises to a height of s = ( [tex]V_{1}[/tex] tan θ )² / 2g m
To know more about height of a projectile
https://brainly.com/question/25928005
#SPJ4
The speed of a projectile when it reaches its maximum height is one-half its speed when it is at half its maximum height. What is the initial projection angle of the projectile?.
According to uniform motion, the initial projection angle is 73.89⁰.
We need to know about uniform motion to solve this problem. The uniform motion is an object's motion under acceleration. It should follow the rule
vt = vo + a . t
vt² = vo² + 2a . s
s = vo . t + 1/2 . a . t²
where vt is final velocity, vo is initial velocity, a is acceleration, t is time and s is displacement.
From question above, we know that
vpeak = 1/2 vt
2vpeak = vt
when projectile at maximum height should equal
vpeak = vx = vo.cosθ
When the projectile reaches a half its maximum height, the time taken is
t = 1/2 tpeak
t = 1/2 (vo sinθ/g)
t = vo sinθ/2g
Find the speed at its half maximum height.
vty = voy + a . t
vty = vo.sinθ - g.vo sinθ/2g
vty = vo sinθ/2
vtx = vo cosθ
vt = √vty² + vtx²
2vpeak = √(vo sinθ/2)² + (vo cosθ)²
2 . cosθ = √(sinθ/2)² + (cosθ)²
4cos²θ = 1/4 . sin²θ + cos²θ
3cos²θ = 1/4 . sin²θ
sin²θ / cos²θ = 12
tan²θ = 12
tanθ = √12
θ = 73.89⁰
Find more on uniform motion at: https://brainly.com/question/28040370
#SPJ4
Explain how economics affects science
Hurry, please i will give crown
in a short-answer response, thoroughly describe what free-body diagrams are used for and what the free-body diagram is telling us about the directions of the forces. Make sure to include which direction the object will move and give an example of what that object could be. (examples: box, soccer ball, rope in a tug-of-war, etc.)
The free body diagram is the diagram that shows us the way that forces act on an object.
What is the Freebody diagram?The free body diagram is the diagram that shows us the way that forces act on an object. We know that force is the reason for the motion of an object. An object moves when it is acted upon by unbalanced forces. If the forces that are acting on the object are balanced the object would not move,
You know that force is a vector, thus the magnitude and the direction of the force is very important when we are trying to describe the action of a system of forces that acts on a body.
For instance, a book could sit still on a table because the book is acted upon by two forces that are balanced these are the weight of the book and the reaction force of the table on the book. These balanced forces makes the book to sit still on the table.
Learn more about free body diagram:https://brainly.com/question/14626208
#SPJ1
To find your Target Heart Rate (THR), you need to know your age and your Resting Heart Rate (RHR).
True
False
The speed of a projectile when it reaches its maximum height is one-half its speed when it is at half its maximum height. What is the initial projection angle of the projectile?.
The speed of a projectile when it reaches its maximum height is one-half its speed when it is at half its maximum height. The initial angle of the projectile is 67.8°.
The motion from zero to maximum height is :
Vyi = √2gh
Now the motion from zero to half of the maximum height is :
Vyh = √gh
At maximum height, the speed is Vx = √Vx^2+Vyh^2/2
Vx =√Vx^2+gh/2
by simplifying,
Vx = √gh/3
To find the angle of projection
∅ = tan^-1(Vyi/Vx) = √2gh/√gh/3
∅ = 67.8°
If you need to learn more about angle of projection, click here
https://brainly.com/question/20459093?referrer=searchResults
#SPJ4
(fill in the blank). _______ is how far an object has moved.
a. Distance
b. Displacement
c. Velocity
d. Rate
Answer:
Distance
Explanation:
formula one racers speed up much more quickly than normal passenger vehicles, and they also can stop in a much shorter distance. a formula one racer traveling at 90 m/sm/s can stop in a distance of 110 mm
The acceleration of the car is found to be 36.8m/s²
The formula One car stops so, the final speed of the car (v) = 0 and the initial speed of the car is given 90m/s.
Distance covered by car ( s) = 110m.
Now we calculate the acceleration of the car by third equation of motion,
v²-u² = 2as
0-902 = 2a ×110
a = 902/2×110 = 36.8m/s².
Formula one cars can reach 60 mph from 0 in about 2.6 seconds. This may seem slow given their highest speed, but because much of their speed comes from aerodynamics, which performs better the faster the car is moving, they are unable to start with all of their power.
The rate of change of velocity with respect to time is known as acceleration. It’s SI unit is m/s².It is a vector quantity. Acceleration can be found out by the help of first and third equation of motion which are F= ma and v ²=u² + 2as.
To learn more about equations of motion, refer this link.
https://brainly.com/question/8898885
#SPJ4
When an alternating current circuit supplies power to a ? load, the circuit voltage and current are in-phase with each other. this is also known as unity power factor.
Photons are shone on a piece of metal and one electron is ejected for each absorbed photon. What happens when the wavelength of light is decreased?.
The ejected electrons would have greater kinetic energy if the wavelength of light is decreased when Photons are shone on a piece of metal and one electron is ejected for each absorbed photon.
What is Kinetic energy?This is referred to as the type of energy which is possessed by a body by virtue of its motion and it has an inverse relationship with the wavelength of light.
This therefore means that as the wavelength of light is decreased, the kinetic energy of the ejected electrons will increase and vice versa which is therefore the reason why it was chosen as the most appropriate choice.
Read more about Kinetic energy here https://brainly.com/question/8101588
#SPJ1
5- To steer an airboat, rudders sit behind the fan. When the air passes through the turned rudders, it turns the boat. Use Newton’s third law to construct an explanation on how the rudders turn the boats
Answer: the air exerts a force on the rudders, and the rudders will exert a force of equal magnitude and opposite direction on the boat causing the boat to start accelerating
Explanation:
a certain device has a voltage difference of 10 v across it. if 1 a of current is flowing through it from its ( ) voltage terminal to its (-) terminal, is the device a power supplier or a power recipient?
The given device is a power recipient, since the value of power calculated using Ohm's law is positive.
We know that,
P = V I
where,
P = Power
V = Voltage
I = Current
Given that,
V = 10 V
I = 1 A ( Since it is flowing from +ve to -ve )
P = 10 * 1
P = 10 W
Since the power is positive, the device is a power recipient.
Ohm's law states that the voltage difference between two points in a conductor is directly proportional to the current flowing from one point to another.
Therefore, the device is a power recipient
To know more about Ohm's law
https://brainly.com/question/1247379
#SPJ4
You are sitting next to a person who has twice as much weight. Are you gravitationally attracted to them? if so, is it twice as much as their attraction to you? if not, why not?.
Yes, I will be gravitationally attracted to the person who has twice as much weight sitting next to me. The gravitational attraction would be equal.
Gravitational pull is the force that everybody on Earth experiences. This force tends to pull a person to the center of the Earth.
The force of gravity is dependent on the masses that each object has. In the case above, the gravitational attraction between you and the person next to you with twice as much weight will be the same because the gravitational pull will be dependent on the product of the two masses of you and the other person. Hence, you are being attracted to that person with the same gravitational force with which he is being attracted to you.
To learn more about gravitationally, click here:
https://brainly.com/question/15090289
#SPJ4
the tension in a clothesline carrying a load of wash is appreciably greater when the clothesline is strung horizontally than when it is strung vertically. why?
The tension vector's vertical components must add up to the weight, hence the vectors along the rope will be extremely enormous.
What is tension ?In physics, tension is defined as the pulling force transmitted axially by a string, cable, chain, or other similar object, or by each end of a rod, truss member, or other comparable three-dimensional object. Tension can also be defined as the action-reaction pair of forces acting at each end of the aforementioned elements.
A force throughout a medium's length is known as tension, particularly a force carried by a flexible medium like a rope or cable. An action-reaction pair of forces acting at each end of the mentioned elements is what is referred to as tension.
To learn more about tension from the given link:
brainly.com/question/15880959
#SPJ4
problem 11.021 - particle motion - dependent multi-part problem - assign all parts skip to question note: this is a multi-part question. once an answer is submitted, you will be unable to return to this part. the acceleration of a particle is defined by the relation a
The velocity of particle when x = -2m is 4.7 m/s.
Acceleration of a particle, a = k ( 1 - [tex]e^{-x}[/tex])
Velocity of the particle, v = +9 when x = -3m
Velocity of the particle, v = 0 when x = 0
We konw that acceleration is:
[tex]a = \frac{dv}{dt}[/tex]
[tex]a= \frac{dx}{dt}.\frac{dv}{dx}[/tex]
[tex]a=v[\frac{dv}{dx}][/tex]
Now,
v dv = a dv .........(i)
Putting a = k ( 1 - [tex]e^{-x}[/tex]) in (i), we get,
[tex]\frac{vdv}{dx}=k (1-e^{-x} )[/tex]
[tex]\int\limits^9_0 {v} \, dv = k\int\limits^3 _0 {(1-e^{-x}) } \, dx[/tex]
[tex]\frac{81}{2} = k(-3 + e^{3}-e^{0} )[/tex]
[tex]\frac{81}{2}=k(-9 + e^{3})[/tex]
[tex]\frac{81}{2}= k[/tex] × [tex]16.0855[/tex]
[tex]k = 2.52[/tex]
Again,
[tex]\int\limits^v_0 {v} \, dx=k\int\limits^2_0 {(1-e^{-x)} } \, dx[/tex]
[tex]\frac{v^{2} }{2}= 2.52 [ (-2 +e^{2}-(0+e^{0})[/tex]
[tex]v= 4.70 m/s[/tex]
Therefore, the velocity of particle when x = -2m is 4.7 m/s.
Read more about Acceleration:
https://brainly.com/question/14640605
#SPJ4
The acceleration of a particle is defined by the relation a= k (1 - [tex]e^{-x}[/tex]), where k is a constant. The velocity of the particle v =+9 m/s when x = -3m and it comes to rest at the origin. Obtaining velocity from a position-dependent acceleration by integration. Also, determine the velocity of the particle when x = -2 m.
a fence post is 51.0 m from where you are standing, in a direction 35.0 ∘ north of east. a second fence post is due south from you. a fence post is 51.0 m from where you are standing, in a direction 35.0 ∘ north of east. a second fence post is due south from you.
Acceleration-∘ north of east. a second fence post is due south from you. a fence post is 51.0 m from where you are standing, in a direction 35.0 ∘
What is acceleration?Acceleration is the wrathful, flaming dragon of motion variables as compared to displacement and velocity. If it's big, it makes you pay attention because it might be violent, some people are afraid of it, and it can be violent. You can feel yourself accelerating while you're in a moving vehicle, such as a go kart, slamming on the brakes, or when you're seated in a moving vehicle, such as a plane, during takeoff.
Anything that causes a change in velocity is referred to as an acceleration. You can only accelerate in one of two ways—either by changing your speed or your direction, or both—since velocity is a function of both speed and direction.
To learn more about acceleration from the given link:
https://brainly.com/question/605631
#SPJ4