Jacob walked into a shop to buy cups for his house. He saw the cups shown below. Why does the cup on the right appear yellow? A. The cup absorbs yellow light but reflects all other colors of light. B. The cup reflects yellow light but refracts all other colors of light. C. The cup refracts yellow light but absorbs all other colors of light. D. The cup reflects yellow light but absorbs all other colors of light.

Answer:

a- customary systems..

Answer:

The cell is in a Hypotonic solution. When a cell is in a Hypotonic solution the lower osmotic pressure causing water to move across the pressure gradient into the solution causing the cell to shrivel.

Answer:

They are all made of cells

Answer: They are all made of cells.

Explanation:

Answer:

A. the light subatomic.... is correct answer

Answer:

0.265 moles

Explanation:

From the equation given;

Number of moles of HCl is 6 while number of moles of H is 3.

Now, we know from avogadro's number that 1 mole of a gas = 6.022 × 10^(23) molecules.

We want to find the number of moles of Hydrogen gas made when 3.2 x 10^(23) molecules of HCl are used.

Thus, converting this to moles gives;

(3.2 × 10^(23))/(6.022 × 10^(23)) = 0.53 moles

Thus, we can find the number of hydrogen gas by proportion as;

n = 3/6 × 0.53

n = 0.265 moles

A raised weight.

Water that is behind a dam.

Have a nice day!

Answer:

When something has a high position, its gravitational potential energy is high. For example, a book on a high bookshelf has higher potential energy than a book on the bottom shelf because it has farther to fall. ... A book on a table before it falls. A child at the top of a slide.

Explanation:

U=m g h

Mass of PH3= 6.086 g

Given

6.0 L of H2

Required

mass of PH3

Solution

Reaction

P4 + 6H2 → 4PH3

Assumed at STP ( 1 mol gas=22.4 L)

Mol of H2 for 6 L :

= 6 : 22.4 L

= 0.268

From the equation, mol PH3 :

= 4/6 x moles H2

= 4/6 x 0.268

= 0.179

Mass PH3 :

= 0.179 x 33,99758 g/mol

= 6.086 g

Answer:

I think #5 is its structure

Explanation:

Answer: The first is Genes and the second one is the structure.

Explanation:

Answer:

false

Explanation:

Waves are created because othe the lunar pull with out the moon we wouldnt have waves

Answer:

From the equation you will see that 1 mol of propane generates 4 mols of water.

Since the molar mass of water  

M ( H2O)=2×1+16=18g/mol

2 mol propane will generate  

2 ×4×18=144g   of water

Explanation:

Since the molar mass of water  

M ( H2O)=2×1+16=18g/mol

2 mol propane will generate  

2 ×4×18=144g   of water

The order of the solutions from lowest to highest concentration : A, B, C

Given

the following solutions

Required

order of increasing  concentration

Solution

Molarity shows the number of moles of solute in every 1 liter of solution.

[tex]\large{\boxed {\bold {M ~ = ~ \frac {n} {V}}}[/tex]

Solution A : 0.5 moles : 2 L solution = 0.25 M

Solution B : 1 moles : 3 L solution = 0.33 M

Solution C : 1.5 moles : 4 L solution = 0.375 M

Answer:

A. H2O

Explanation:

Let us first define the three types of bonds:

1. Nonpolar Covalent: electronegativity difference < 0.4

2. Polar Covalent: electronegativity difference between 0.4 and 1.8

3. Ionic: electronegativity difference > 1.8

This will help us eliminate choices C and D:

-NaCl has a electronegativity difference of 3.0 - 0.9 = 2.1 (ionic bond)

-Cl2 has a electronegativity difference of 3.0 - 3.0 = 0 (nonpolar covalent bond)

However, we still have two more options, A and B, but they are not diatomic for us to use the electronegativity differences with.

We must now consult their geometries. Because CO2 has a linear geometry (O=C=O), the two sides will cancel each other out, resulting in a nonpolar covalent bond. At this point, by process of elimination, we can already determine the answer to be A. H2O. We can verify this by looking at the geometry of H2O, which is bent (H-O-H; imagine the O is above the H's, I cannot draw it in this response). H2O's bent geometry classifies it as polar covalent; the electrons are slightly more attracted towards the O, the more electronegative element. Side note: this makes the O slightly more negative in charge, whilst the H's are slightly more positive in charge.

P.S. I apologize for not being able to draw and demonstrate that last paragraph, but I hope you get a general idea. You can search up the "H2O geometry" and "CO2 geometry" to get a better idea! :)

H₂O represents a nonpolar molecule containing polar covalent bonds. Hence Option (A) is correct

A polar covalent bond exists when atoms with different electronegativities share electrons in a covalent bond.

Consider the hydrogen chloride (HCl) molecule. Each atom in HCl requires one more electron to form an inert gas electron configuration.

Water (H₂O), like hydrogen Chloride (HCl), is a polar covalent molecule. When we look at a diagram of water , we can see that the two hydrogen atoms are not evenly distributed around the oxygen atom

Water (H₂O) is polar because of the bent shape of the molecule. The shape means most of the negative charge from the oxygen on side of the molecule and the positive charge of the hydrogen atoms is on the other side of the molecule.Thus, This is an example of polar covalent chemical bonding.

Therefore, H₂O represents a nonpolar molecule containing polar covalent bonds. Hence Option (A) is correct

Learn more about bonding here :

brainly.com/question/1603987

#SPJ2

Answer:

drought

Explanation:

because it looses all of the water in the aria / desertification

Answer:

No

Explanation:

The conclusions from Thomoson's claims would be invalid if his experiment could not be replicated.

One of the attributes of a valid experiment in science is replication. That is, an experiment must be repeatable with similar outcomes under similar conditions as the original experiment when independently performed by another scientist. Once an experiment cannot be replicated, the outcomes of such an experiment become invalid in science.

Hence, Thomoson's conclusion would be invalid if his experiment could not be replicated.

As the amount of salt in water increases, the density of the water increases. The more particles present in unit volume the more densely packed the substance.

Density of a substance is the measure of its mass per unit volume. Density describes how closely its particles are  packed. Densely packing means more particles in a unit volume.

The density of water is 1 g/ml. However, when the salinity increases, the salt solution increases in density by the solute particles. If the density of an object is less than water, it will float on it. Objects denser than water will sink on water.

As the salinity increases, density of water increases, makes the surface tension also increases, which best illustrates what happens in dead sea. Hence, option b is correct.

Find more on water density:

https://brainly.com/question/14373997

#SPJ6

Answer:

[tex]\boxed {\boxed {\sf About \ 92.2 \ moles \ of \ Magnesium}}[/tex]

Explanation:

To convert from atoms to moles, we must Avogadro's number:

This number tells us the amount of particles (atoms, molecules, etc.) in 1 mole of a substance. In this case, it is atoms of magnesium in 1 mole.

Now, let's set up an expression using:

[tex]\frac {6.022 * 10^ {23} \ atoms \ Mg}{ 1 \ mol \ Mg}[/tex]

Multiply this by the given number of atoms.

[tex]5.55*10^{25} \ atoms \ Mg *\frac {6.022 * 10^ {23} \ atoms \ Mg}{ 1 \ mol \ Mg}[/tex]

Flip the fraction so the atoms of magnesium can cancel.

[tex]5.55*10^{25} \ atoms \ Mg *\frac { 1 \ mol \ Mg }{6.022 * 10^ {23} \ atoms \ Mg}[/tex]

[tex]5.55*10^{25} *\frac { 1 \ mol \ Mg }{6.022 * 10^ {23}}[/tex]

Multiply and condense this into 1 fraction.

[tex]\frac { 5.55*10^{25} \ mol \ Mg }{6.022 * 10^ {23}}[/tex]

[tex]92.1620724 \ mol \ Mg[/tex]

The original measurement had 3 significant figures, so our answer must have that many as well. For the number we calculated, that is the tenth place. The 6 in the hundredth place tells us to round the 1 to a 2.

[tex]92.2 \ mol \ Mg[/tex]

It is about 92.2 moles of magnesium.

Answer:13.70 i think

Explanation:

Answer:

YESSIR

Explanation:

Answer:

Of the many processes involved in the water cycle, the most important are evaporation, transpiration, condensation, precipitation, and runoff.

Explanation:

Answer:

Cell theory states that cell living organisms are composed of at least one cell, which are the basic unit of life. Cells are always produced from other living cells, and cannot spontaneously generate

Answer:

1, 2, 2, 1

Explanation:

Answer:

Answer:

The mole ratio of C₄H₁₀ and CO₂ is 2 : 8, which  simplifies to 1 : 4.

Explanation:

The mole ratio is the relative proportion of the moles of products or reactants that participate in the reaction according to the chemical equation.

The chemical equation given is:

2C₄H₁₀ + 13O₂ → 8CO₂ + 10H₂O

Once you check that the equation is balanced, you can set the mole ratios for all the reactants and products. The coefficients used in front of each reactant and product, in the balanced chemical equation, tells the mole ratios.

In this case, they are: 2 mol C₄H₁₀ :  13 mol O₂ : 8 mol CO₂ : 10 mol H₂O

Since you are asked about the mole ratio of C₄H₁₀ and CO₂ it is:

2 mol C₄H₁₀ : 8 mol CO₂ , which dividing by 2, simplifies to

1 mol C₄H₁₀ : 4 mol CO₂, or

1 : 2.

Explanation:

Answer:

K = 30N/m

Explanation:

We use this equation:

F= k∆x

Where ∆x refers to the amount or stretch or compression and k is the spring constant.

F = force

k = spring constant

∆x = change in length of spring

We don't know the value of k, so we make k the subject:

k = F/∆x

k = 6N x 0.2m

k = 30N/m

Answer:

well, we have so much better and more tech and we are a lot smarter than we were before.

Explanation:

Answer:

We have way more advanced technology than our ancestors and we have a better idea of how the earth was millions of years ago.

Explanation:

Answer:

draw the carbon chain is containing 6 carbon then attach the aldehyde group with edge carbon in chain then put the put double bond at 3 no. carbon

Answer:

C

Explanation:

increase potential energy ( in motion)