List what you are thankful for! (It's Thanksgiving! Answer if you bake! Or if you like cakes pies cookies and treats!!! )

Answer:

1. Number of moles in 3.63 * 10²² atoms of K = 0.06 moles

2. Number of moles in 5.96 g of BaCO₃ = 0.03 moles

3. Number of moles of NH₃ = 0.88 moles

4. Volume of CSI = 0.50 liters

Explanation:

1. One mole of K contains 6.02 * 10²³ atoms

Number of moles in 3.63 * 10²² atoms = (3.63 * 10²² atoms/6.02 * 10²³ atoms) * 1 mole

Number of moles in 3.63 * 10²² atoms of K = 0.06 moles

2. Number of moles = mass / molar mass

Molar mass of BaCO₃ = 197.33 g/mol; mass of BaCO = 5.96 g

Number of moles = 5.96 g/ 197.33 g/mol

Number of moles in 5.96 g of BaCO₃ = 0.03 moles

3. Number of moles = mass / molar mass

Molar mass of NH₃ = 17 g/mol; mass of NH₃ = 1.50 g

Number of moles = 1.50 g/ 17 g/mol

Number of moles of NH₃ = 0.88 moles

4. Chlorosulfonyl isocyanate, ClSO2NCO, otherwise known as CSI, is a reagent used in organic synthesis. It has a density of 1.626 g/cm³.

Volume = mass/density

mass = 82.0 g; density of CSI = 1.626 g/cm³

Volume = 82.0 g / 1.626 g/cm³

Volume = 50.43 cm³

Volume = 50.43 cm³/1000 cm³ * 1 liter

Volume of CSI = 0.50 liters

Answer:

I think is C

Explanation:

'Cause the questions says "these sections will Never cut down", so that means is proctecting the environment

Answer: d

Explanation:

On edg

Answer:

umm.. B. a base that generates a lot of hydroxide ions in water.

The descriptions best describes a weak base is a base that dissociates only slightly in water.

Bases are those substances which react with acids to neutralize them, generally bases are the compounds of oxides, hydroxides and carbonates of metal elements.

Bases shows dissocation in the aqueous soluition and pH of bases ranges from 7 to 14. Strong bases shows full dissociation into ions and having higher pH values and weak bases shows partial dissociation into ions & having lower pH values.

Hence, option (D) is correct.

To know more about bases, visit the below link:

https://brainly.com/question/3920636

Answer:

-3

Explanation:

Phosphorus becomes phosphide with a -3 charge

Answer:

3 CO₃²⁻(aq) + 2 Cr³⁺(aq) ⇒ Cr₂(CO₃)₃(s)

Explanation:

Let's consider the molecular equation that occurs when aqueous solutions of ammonium carbonate and chromium(III) nitrate are combined.

3 (NH₄)₂CO₃(aq) + 2 Cr(NO₃)₃(aq) ⇒ 6 NH₄NO₃(aq) + Cr₂(CO₃)₃(s)

The complete ionic equation includes all the ions and insoluble species.

6 NH₄⁺(aq) + 3 CO₃²⁻(aq) + 2 Cr³⁺(aq) + 6 NO₃⁻(aq) ⇒ 6 NH₄⁺(aq) + 6 NO₃⁻(aq) + Cr₂(CO₃)₃(s)

The net ionic equation includes only the ions that participate in the reaction and the insoluble species.

3 CO₃²⁻(aq) + 2 Cr³⁺(aq) ⇒ Cr₂(CO₃)₃(s)

A chemical reaction does not create or destroy matter, it simply moves electrons from one atom to another, but does not change the nucleus of the atoms. ... The total mass of the matter can change during a nuclear reaction, the mass loss can convert into energy, which is called the nuclear power.

Answer:

AsH(2.) CHEBI:33104

Explanation:

Molecular Weight is : 75.9296 g/mol

Answer:

75603.86473 K

Explanation:

Given that:

The 1st excited electronic energy level of He atom = 3.13 × 10⁻¹⁸  J

The objective of this question is to estimate the temperature at which the ratio of the population will be 5.0 between the first excited state to the ground state.

The formula for estimating the ratio of population in 1st excited state to the ground state can be computed as:

[tex]\dfrac{N_2}{N_1} = e ^{^{-\dfrac{(E_2-E_1)}{KT}}} = e ^{^{-\dfrac{(\Delta E)}{KT}}}[/tex]

From the above equation:

Δ E = energy difference =  3.13 × 10⁻¹⁸  J

k = Boltzmann constant = 1.38 × 10⁻²³  J/K

[tex]\dfrac{N_2}{N_1} = 0.5[/tex]

Thus:

[tex]0.05 =e^{^{ -\dfrac{3.13 \times 10^{-18} \ J}{1.38\times 10^{-23 \ J/K}\times T}}}[/tex]

[tex]In (0.05) = { -\dfrac{3.13 \times 10^{-18} \ J}{1.38\times 10^{-23 \ J/K}\times T}}}[/tex]

[tex]-3.00 = { -\dfrac{3.13 \times 10^{-18} \ J}{1.38\times 10^{-23 \ J/K}\times T}}}[/tex]

[tex]-3.00 = -226811.5942 \times \dfrac{1}{T}[/tex]

[tex]T = \dfrac{-226811.5942}{-3.00 }[/tex]

T = 75603.86473 K

Answer:

diastereomers

Explanation:

Enantiomers are optical isomers that are mirror images of each other. Enantiomers can not be separated by physical methods because the both compounds have almost the same physical properties such as melting points, boiling points, etc. This makes it difficult to separate enanatiomers by conventional methods.

A common method of separating enantiomers is by converting them into diasteromers which are easily separated since diasteromers often have different chemical and physical properties.

Answer:

The correct option is D

Explanation:

Firstly, let's define the periodicity of these terms and then draw  conclusion from there.

Ionization energy is the amount of energy required to remove an electron from a gaseous atom in it's ground state. This property increases across a group in the periodic table.

Electronegativity is the measure of the property/tendency of an atom to attract an electron. This property also increases across a period. Thus, elements that have high electronegativity also have a high ionization energy.

Atomic radius is however the distance between the central nucleus to the outermost electron. This property decreases across the period. Thus, as electronegativity and ionization energy increases, atomic radius decreases.

From the above, it can be deduced that the correct option is d

Answer:high,small

Explanation:

I have the same test and I got it right

Answer:

The correct answer is - Amplitude.

Explanation:

Frequency modulation is a method or procedure that sends or transmits the signals such as radio broadcasting, telecommunication where the value of the transmitted signal is provided by the frequency of a high-frequency wave that carries the signal.

In this method of encoding the information, the amplitude of the carrier remains the same or constant but frequency varies in accordance with the modulating signal.

Answer:

The answer is C Amplitude

Explanation:

Because you can give me Brainiest  PLZZZZZZZZZZZZZZZZZZZZ

Answer:

1.5 moles H₂O

General Formulas and Concepts:

Chemistry - Stoichiometry

Explanation:

Step 1: Define

RxN:   2H₂ + O₂ → 2H₂O

Given:   0.750 moles O₂

Step 2: Stoich

[tex]0.750 \ mol \ O_2(\frac{2 \ mol \ H_2O}{1 \ mol \ O_2} )[/tex] = 1.5 moles H₂O

Step 3: Check

We are given 3 sig figs.

Since our answer is 2 sig figs, we don't need to round.

Answer:

B) 1st C sp3 ; 2nd C sp3 ; O sp3

Explanation:

Both carbons in ethanol have an sp³ configuration of their orbitals, given that each carbon atom binds to four other atoms, as can be seen on the extended formula in the attachment.

In these carbons (1st and 2nd) one s orbital and three p orbitals are hybridized to form four hybrid orbitals sp³. These orbitals form four bonds and their bond angles are close to the tetrahedral value of 109.5º,as can be seen for methanol which also has an sp³ configuration.

The oxygen atom can also be described as having sp³ hybrid orbitals. Two of the four hybrid sp³ orbitals in oxygen are occupied by lone electron pairs, and two are used to form bonds with other atoms (in this case the oxygen is bonded to a carbon atom and a hydrogen atom).

Therefore, the three central atoms have an sp³ configuration.

Answer:

c 520kj mol

Explanation:

times all the electrons

Answer:

The predator-prey relationship helps to hold the populations of the two species in equilibrium. ... If the population of prey increases, there is more food for predators. So after a slight period, the predator population is also increasing. If the number of predators increases, more prey is captured.

Explanation:

Answer:

i eat you, you die

Explanation:

thats how life works

Answer:

A. Chemical Energy --> Thermal Energy

D. Chemical Energy --> Electromagnetic Energy

Explanation:

I took the quiz!

Answer:

The correct answer is 2.1

Explanation:

The neutralization reaction involved in the titration is between a strong acid (HCl) and a strong base (NaOH), as follows:

HCl + NaOH → NaCl + H₂O

According to this, 1 equivalent of HCl reacts with 1 equivalent of NaOH. The equivalence point is the point at which the amount of NaOH added reacted completely with the amount of HCl.

moles of acid = moles of base

moles HCl = moles NaOH

Ca x Va = Cb x Vb

Ca = (Cb x Vb)/Va = (0.16 M x 17 mL)/(350 mL) = 7.8 x 10⁻³ M

Since HCl is a strong acid, we calculate the pH of the solution directly from the concentration of acid:

[H⁺]= Ca = 7.8 x 10⁻³ M

pH = -log [H⁺] = -log (7.8 x 10⁻³ M) = 2.11

Therefore, the pH of the HCl solution is 2.1

Answer:

true

Explanation:

Answer:

The leftover is 15 g of oxygen rather than liquid hexane as the fuel limits the reaction.

Explanation:

Hello!

In this case, since the described combustion reaction is:

[tex]C_6H_{14}(l)+\frac{19}{2} O_2(g)\rightarrow 6CO_2(g)+7H_2O(g)[/tex]

Thus, since 5.2 g of hexane (86.2 g/mol) is reacted with 33.0 g of oxygen (32.0 g/mol) we can compute the mass of hexane that was actually consumed via stoichiometry with oxygen (1:19/2 mole ratio):

[tex]m_{C_6H_{14}}^{consumed \ by\ O_2}=33.0gO_2*\frac{1molO_2}{32.0gO_2}*\frac{1molC_6H_{14}}{\frac{19}{2}gO_2 } *\frac{86.2gC_6H_{14}}{1molC_6H_{14}} \\\\m_{C_6H_{14}}^{consumed \ by\ O_2}=9.36gC_6H_{14}[/tex]

It is proved then than the hexane won't have any leftover but oxygen does, as shown below:

[tex]m_{O_2}^{consumed \ by\ C_6H_{14}}=5.2gC_6H_{14}*\frac{1molC_6H_{14}}{86.2gC_6H_{14}} *\frac{\frac{19}{2}molO_2 }{1molC_6H_{14}} *\frac{32.0gO_2}{1molO_2} \\\\m_{O_2}^{consumed \ by\ C_6H_{14}}=18g[/tex]

It means the leftover of oxygen is:

[tex]m_{O_2}^{leftover}=33g-18g\\\\m_{O_2}^{leftover}=15g[/tex]

Regards!

Answer:

Molecular

Explanation:

Using the rules for the nomenclature for naming binary covalent (molecular) compounds, the compound SO3 is named sulfur trioxide. The prefix tri- indicates that the oxygen has a subscript of 3 and that a molecule of sulfur trioxide has three oxygen atoms.

Answer: B

Kinetic Energy is the energy possessed by the body due to "motion".

Answer:

B- motion

Explanation:

Correct on edge 2021

️️

Answer:

1. A. True

2. A. True

3. B. False

4. A. True

5. B. False

Explanation:

1. The particles are in constant motion. The collisions of the particles with the walls of the container are the cause of the pressure exerted by the gas. A. True. The pressure of an ideal gas is higher than the one that would exert a real gas.

2. The particles are assumed to exert no forces on each other; they are assumed neither to attract nor to repel each other. A. True. The intermolecular forces are negligible.

3. The particles are so small compared with the distances between them that the volume of the individual particles can be assumed to be about 1 mL. B. False. The volume of the gas particles is negligible.

4. The molecules in a real gas have finite volumes and do exert forces on each other, thus real gases do not conform to some of the assumptions of an ideal gas as stated by the kinetic molecular theory. A. True. We cannot apply ideal gas laws to real gases.

5. The average kinetic energy of a collection of gas particles is assumed to be inversely proportional to the Kelvin temperature of the gas. B. False. The average kinetic energy of a collection of gas particles is assumed to be directly proportional to the Kelvin temperature of the gas.

The given statement, "if the particles are in constant motion and there are collisions of the particles with the walls of the container, then they are the cause of the pressure exerted by the gas." is:

The given statement "The particles are assumed to exert no forces on each other; they are assumed neither to attract nor to repel each other" is:

The given statement, "The particles are so small compared with the distances between them that the volume of the individual particles can be assumed to be about 1 mL" is:

The given statement ,"The molecules in a real gas have finite volumes and do exert forces on each other, thus real gases do not conform to some of the assumptions of an ideal gas as stated by the kinetic molecular theory" is:

The given statement, "The average kinetic energy of a collection of gas particles is assumed to be inversely proportional to the Kelvin temperature of the gas" is:

Read more here:

https://brainly.com/question/24760728

Answer:

Explanation:

A calorimeter is an instrument used for measuring the heat of reactions and heat capacity. A calorimeter should contain an insulating cover, a thermometer, styrofoam cups (you could have that both on the inside and the outside in the case of a styrofoam calorimeter) and you could also have a conductivity probe (in the form of ignition wires and bulb).

A calorimeter is the analytical device used to measure the heat of the reaction. The construction of calorimeter requires cover, paper cup, thermometer, styrofoam cup, and conductivity probe.

In a chemical reaction, the amount of heat released or absorbed by the reaction helps in the analysis of various parameters. The calorimeter measures the heat of the reaction.

The construction of a calorimeter requires:

Learn more about calorimeter, here:

https://brainly.com/question/14989357

Answer:

The correct answer is 4.84

Explanation:

We use the Henderson Hasselbach's equation to calculate the pH of a buffer solution:

pH = pKa = log ( [conjugate base]/[weak acid])

In this case:

conjugate base: acetate ⇒ [conjugate base] =  [acetate] = 0.0200 M

weak acid: acetic acid ⇒ [weak acid] =  [acetic acid] = 0,0200 M

pH = pKa + log ([acetate]/[acetic acid])= pKa + log (0.0200 M/0.0200 M)

When a strong base- such as NaOH- is added, the acid reacts with OH⁻ to form the conjugate base. So, the conjugate base is increased while the acid is decreased. Thus, in 1 liter of solution we have:

acetate = (0,0200 mol/L x 1 L) + (2.0 mmol x 1 mol/1000 mmol) = 0.022 mol

acetic acid= (0,0200 mol/L x 1 L) - (2.0 mmol x 1 mol/1000 mmol) = 0.018 mol

Finally, we calculate the pH:

pH = 4.75 + log (0.022 mol /0.018 mol )= 4.84

Buffer has been the solution that resists the change in the pH of the solution with the addition of acid or base. The pH of buffer with NaOH has been 4.84.

The pH has been the hydrogen ion concentration in the solution. The pH has been equivalent to pKa and can be given as:

[tex]\rm pka=log\dfrac{[base]}{[acid]}[/tex]

The base in the buffer has been the acetate, while acetic acid act as the acid.

The concentration of NaOH added to the solution has been given as:

[tex]\rm Molarity=\dfrac{moles}{volume}\\\\ NaOH=\dfrac{0.002\;mol}{1\;L}\\\\ NaOH=0.002\;M[/tex]

The addition of NaOH adds the concentration of base, and neutralization reduces the concentration of acid. Thus, the new pKa can be given as:

[tex]\rm pKa=log\dfrac{0.2+0.002}{0.2-0.002} \\pKa=log\dfrac{0.022}{0.018}[/tex]

The new pH of the solution has been the sum of the old and the new pKa value.

Thus, the pH of the new buffer has been given as:

[tex]\rm pH=4.75+log\dfrac{0.022}{0.018}\\ pH=4.84[/tex]

The pH of buffer with NaOH has been 4.84.

Learn more about buffer, here:

https://brainly.com/question/1423164

Answer:  the cake rises as gas bubbles form in the cake

Explanation: Had a quizziz quiz on this

Answer: The cake rises as gas bubbles form in the baking cake.

Explanation: had a test, got it right.

Answer:

it is true bc i looked it up