Answer:
Spectrometric monitoring offers a continuous operating measurement system for nuclide specific detection of low level gamma contamination in air and in liquids. A spectroscopic analysis is performed in order to identify radionuclides.
Explanation:
i think
Answer:
If you need to match paint for a repair, you can take a paint chip to a hardware store, and they can analyze it to mix paint for an exact match to the chip.
Light bulb manufacturers probably use spectrographic analysis to create bulbs that are rated warm, cool, etc.
Manufacturers of sunglasses probably analyze the intensity of light at different frequencies (colors) that are transmitted by the glasses.
Steel makers can measure the temperature of molten metal in a furnace using a radiometer.
Una fuerza resultante constante de módulo igual a 40 [N], actúa sobre un cuerpo que se mueve en línea recta.¿Que distancia ha recorrido ese cuerpo si su energía cinética varió en 8 [J]?
Responder:
0,2 m
Explicación:
Usando la fórmula para calcular el trabajo realizado expresada como;
Workdone = Fuerza * Distancia
Dado
Fuerza = 40N
Trabajo realizado = 8 julios
Necesario
Distancia
Sustituya los parámetros dados en la fórmula como se muestra;
Distancia = Trabajo / Fuerza
Distancia = 8/40
Distancia = 0,2 m
Por tanto, el cuerpo recorrió una distancia de 0,2 m
HEY GUYS IS THIS TRUE OR FALSE????????
How do the individual forces compare when the rider experiences a sensation being lighter than his normal weight ? What is the acceleration direction when this occurs ?
Answer:
When the elevator is accelerating downward, the person feels lighter due to the downward normal force being less than the person's weight.
Explanation:
A person riding in an elevator subjected to a series of unbalanced forces depending on the direction the elevator is travelling.
Two forces are acting on the person; the force of gravity and the upward normal force from the elevator.
When the elevator is going upwards with acceleration a, the person feels heavier than his normal weight, due to the upward normal force being greater than the person's weight. N = mg + ma
When the elevator is moving downwards with acceleration a, the person feels lighter due to the downward normal force being less than the person's weight. N = mg - ma
However, when the elevator is moving up or down at constant velocity ie. acceleration a = 0, the person experience a normal force equal to weight. N = mg
When the elevator is moving downwards with acceleration a = g, the person experiences weightlessness. N = (mg - mg) = 0
A block is given an initial velocity of 8.0 m/s up a frictionless 28° inclined plane. (a) What is its velocity when it reaches the top of the plane? (b) How far horizontally does it land after it leaves the plane?
Answer:
A.) 8 m/s
B.) 7.0 m
Explanation:
Given that a block is given an initial velocity of 8.0 m/s up a frictionless 28° inclined plane.
(a) What is its velocity when it reaches the top of the plane?
Since the plane is frictionless, the final velocity V will be the same as 8 m/s
The velocity will be 8 m/s as it reaches the top of the plane.
(b) How far horizontally does it land after it leaves the plane?
For frictionless plane,
a = gsinø
Acceleration a = 9.8sin28
Acceleration a = 4.6 m/s^2
Using the third equation of motion
V^2 = U^2 - 2as
Substitute the a and the U into the equation. Where V = 0
0 = 8^2 - 2 × 4.6 × S
9.2S = 64
S = 64/9.2
S = 6.956 m
S = 7.0 m
Plz help plllzzzzzzzz
PLEASE HELP ME QUICKLY!!!!!!!!!!!!!!
Answer:
I think thats the correct answer
Explanation:
Which quantities define momentum?
Answer:
velocity and mass
Explanation:
:) apek
please help
im on my sisters acc btw lol
Answer:
Dumbell flys - Pectoral
One Arm Rows - Latissimus Dorsi (Lat)
Pushdowns - Triceps
Machine Back Press - Shoulders
Explanation:
If forces acting on an object are unbalanced, which factor may result from an unbalanced force? A.The net force is negative. B.There is zero net force. C.The forces cancel each other out. D.There is no change in motion.
Answer:
A. The net force is negative.Explanation:
just took the test :)
Answer:
#AExplanation:
Charlie's father built a tree house in their backyard. He constructed a spiral staircase around the tree trunk and installed a ladder. Which will involve more work in climbing up the tree house from the ground?
Answer:
The spiral staircase will require more work
Explanation:
This is because, work can be calculated as force (which is mass of the individual climbing the stairs in this case) multiplied by distance (or length) of the stairs. The only variable that changes in the work done while climbing any of the two (ladder or spiral staircase) is the distance and it is obvious the length of the spiral staircase will be longer; thus the spiral staircase will involve more work.
A ball thrown vertically upward is caught by the thrower after 2.93 s. Find the initial velocity of the ball. The acceleration of gravity is 9.8 m/s 2 . Answer in units of m/s.
Answer:
The initial velocity of the ball is 28.714 m/s
Explanation:
Given;
time of flight of the ball, t = 2.93 s
acceleration due to gravity, g = 9.8 m/s²
initial velocity of the ball, u = ?
The initial velocity of the ball is given by;
v = u + (-g)t
where;
v is the final speed of the ball at the given time, = 0
g is negative because of upward motion
0 = u -gt
u = gt
u = (9.8 x 2.93)
u = 28.714 m/s
Therefore, the initial velocity of the ball is 28.714 m/s
If an object has a fast velocity, the dots on a ticker tape diagram will be _____.
very long
far apart
very short
close together
Answer:
If an object has a fast velocity, the dots on a ticker tape diagram will be far apart.
please help lol
im on my sisters acc btw
Answer:
sitting leg curls= hamstring
shrugs=shoulders
machine curls=biceps
bench press= pectorals
El extremo de una cuerda se mueve de tal manera que las partículas de la cuerda emplean 0.25 segundos para producir una vibración. ¿Cuál es el periodo? Y ¿Cuál es la frecuencia de la vibración producida
Responder:
T = 0.25 segundos
f = 4 Hz
Explicación:
Paso uno:
datos dados
se nos dice que las partículas tardan 0,25 segundos en completar una vibración
por lo tanto, el período es de 0,25 segundos
¿Qué es un período de vibración?
Un período T es el tiempo necesario para que un ciclo completo de vibración pase por un punto determinado.
la expresión para el período se da a continuación.
T = 1 / f
¿Cuál es la frecuencia de vibración?
Básicamente, se refiere a la frecuencia con la que ocurren las vibraciones.
la frecuencia es una tasa, se expresa como la inversa del período
f = 1 / T
t = 1 / 0.25
f = 4 Hz
Speed and Motion you went from the starting line to the finish line at different rates. If you repeated the activity while carrying weights but keeping your times the same, how would your kinetic energy be affected?
Answer:
It will cause kinetic energy to increase.
Explanation:
Given that Speed and Motion you went from the starting line to the finish line at different rates.
If you repeated the activity while carrying weights but keeping your times the same, the weight carried will add up to the mass of the body.
And since Kinetic energy K.E = 1/2mv^2
Increase in the mass of the body will definitely make the kinetic energy of the body to increase.
Since the time is the same, that means the speed V is the same.
Weight W = mg
m = W/g
The new kinetic energy will be:
K.E = 1/2(M + m)v^2
This means that there will be increase in kinetic energy.
Using a force of 10 N, you
push a shopping cart 10 m.
How much work did
you
do?
Answer:
100 JExplanation:
The work done by an object can be found by using the formula
workdone = force × distance
From the question we have
workdone = 10 × 10
We have the final answer as
100 JHope this helps you
The path of a projectile is called a ???
Answer:
Projectile motion is a form of motion where an object moves in parabolic path; the path that the object follows is called its trajectory.
Explanation:
Select the correct answer from each drop-down menu.
What causes atoms to form covalent bonds?
The number of
In a covalent bond, two atoms are held together by the attraction between
covalent bonds that an atom can form depends on the number of
in the atom.
Answer:
YES the first option
Explanation:
two atom are held together
Answer:
In a covalent bond, two atoms are held together by the attraction between each atom and the shared electrons. The number of covalent bonds that an atom can form depends on the number of valence electrons in the atom.
The Moon has a radius of 1.7 × 106 m and a mass of 7.3 × 1022 kg. Find the gravitational field on the surface of the Moon.
Answer:
10.7*[tex]10^{6}[/tex]
Explanation:
Cual es la fuerza de empuje que recibe un cuerpo de forma cilíndrica que mide 0.3 m de radio y 8m de altura, el cual se sumerge en alcohol si su densidad es de 790 Km/m3 tomando en cuenta la gravedad de 9.8m/seg2
Responder:
Fb = 17,5 kN
Explicación:
La expresión de la fuerza de empuje
Fb = ρgV ---------- 1
dónde
Fb = fuerza de flotación
ρ = densidad del fluido
g = aceleración debida a la gravedad
V = volumen de fluido
Paso uno:
datos dados
radio del cilindro = 0,3 m
altura h = 8m
densidad = 790 kg / m ^ 3
g = 9,8 m / s ^ 2
El volumen del cilindro se expresa como
V = πr ^ 2h
V = 3,142 * 0,3 ^ 2 * 8
V = 3,142 * 0,09 * 8
V = 2,26
El volumen es 2.26m ^ 3, el volumen del cilindro es igual al volumen de alcohol disparado
La expresión de la fuerza de empuje es
Fb = ρgV
sustituyendo tenemos
Fb = 790 * 9,8 * 2,26
Fb = 17514,26N
Fb = 17,5 kN
In a physics lab, students take a long piece of string and cut it into two unequal pieces. One piece is used to suspend a large weight. The second piece is tied to the bottom of the weight as seen in the diagram below. Student 1 predicts that the upper string will always break first since it has to support the weight and the applied force, while Student 2 disagrees and predicts that the shorter piece of string will always break first if you pull slowly but with enough force to exceed the strength of the string.
(a) Which aspect(s) of Student 1’s reasoning, if any, are correct? Explain your answer.
(b) Which aspect(s) of Student 2’s reasoning, if any, are correct? Explain your answer.
(c) Which aspect(s) of both Student 1’s and 2’s reasoning, if any, are incorrect? Explain your answer.
(d) The experiment is performed and both students are surprised to learn that whether
the upper or lower string breaks first depends on whether you pull slowly or with a
sudden pull. Resolve the two lines of reasoning of Student 1 and Student 2 by
explaining the results of the experiment in a clear, concise paragraph.
Answer:
(a) The aspect of the upper string supporting the weight and the applied force
Student 1 is correct because the upper string is the source of support of the large weight and the force applied to the short string reacts at the support of the long string
(b) The aspect of Student's (2) reasoning that is correct is that the shorter piece of string will always break first, however, the statement is only true for sudden pull due to the increased force experienced by the shorter string from a more rapid change in momentum
(c) The aspect of Student 1's statement that is incorrect is the that the upper string will always break first
The aspect of Student 2's statement that is incorrect is the that the shorter piece of string will always break first
(d) A string will break when subject to a force equivalent to its breaking force. The force experienced by the string increases as the rate of pull (suddenness) increases and the suddenness increases inversely with the length of the string, as such the shorter lower string will break first from a sudden pull before the force of the pull is completely transmitted to the upper string. Whereby the lower string is slowly pulled, the force is evenly transmitted to the upper string which is then taking up the load of the weight and the applied force together and is likely to break first
Explanation:
know the reasons why people have conflict
Answer:
just to have conflict
Explanation:
Answer:
·Some people find enjoyment in conflict. (Negative people and bullies)
·Sometimes the only thing that makes that person feel food is to throw people down.
·Conflict happens when two people disagree.
Explanation:
These are just some but there are many more :)
Hope this Helps
:D
A bar magnet is a permanent magnet, While an electromagnetic temperary?
yes an electromagnetic is temporary
Which of the following is NOT a way that a machine makes work easier to do?
A. Change the size of a force
B. Change the type of force
C. Change the direction of the force
D. Change distance a force acts
Answer:
c
Explanation:
ur changing the way it move not to make it easier
The direction of the force, has nothing to do with how the machine will work easier. The correct option is C
A machine is any devices that make work easier. An ideal machine takes in small effort to overcome large load.
Since work has to be done in a machine, and work is the product of force and perpendicular distance, for a machine to work easier, the work done will depend on size of the force applied, the type of force applied, and also, the magnitude of the distance involved.
The direction of the force, has nothing to do with how the machine will work easier. Therefore, the correct option is C
Learn more here : https://brainly.com/question/19546590
How much net force must Mrs. McD’s 30,000 kg jet plane develop to achieve an acceleration of 1.5 m/s2?
Cody’s car accelerates from 0m/s to 65 m/s northward in 25 seconds. What is the acceleration of the car?
Answer:
v=v(initial)+at
45=0+15a
a= 3m/sec²
Explanation:
edge 2020
A 30 N net force on a skater produces an acceleration of 0.6 m/s2 . What is the mass of the skater?
The mass of the Skater is 50 Kg.
We have a skater who is under the influence of 30 Newton of force.
We have to determine the mass of skater.
State Newton's Second law of Motion ?Newton's second law of motion states that the rate of change of momentum is directly proportional to the force applied. Mathematically-
[tex]$F\;\alpha \; \frac{dp}{dt}[/tex]
According to the question, we have -
Force on Skater - 30 N
Acceleration Produced - 0.6 [tex]m/s^{2}[/tex]
We know -
F = ma
30 = m x 0.6
m = 30/0.6 = 50 Kg
Hence, the mass of the Skater is 50 Kg
To solve more questions on Force, visit the link below-
https://brainly.com/question/20841272
#SPJ2
A truck moves 30 km West, and then 40 km North, and then travels in a straight path back to its starting
point. The distance travelled by the truck is km and its displacement is
km
Distance = (30+40+50) = 120 km
It's back where it started, so displacement = zero
The distance traveled by truck is equal to 70 km and its displacement is 50 km.
What are distance and displacement?The distance of an object can be described as the total path traveled by an object. It is a scalar quantity as it has only magnitude, not direction. The distance is always positive, it can never be zero.
The displacement can be described as the shortest distance between two points. The displacement is a vector quantity with both direction and magnitude. The displacement of an object can be positive, negative, or zero and can increase or decrease with time.
Given, a truck moves 30 km along AB in the West as shown in the attached figure below, and then 40 km North along BC.
The distance of the truck will be = AB + BC = 30 + 40 = 70Km
The displacement (AC) can be calculated by using Pythagoras' theorem:
AC² = AB² + BC²
AC² = (30)² + (40)²
AC² = 2500
AC = 50 Km
Therefore, the distance is 70 Km and the displacement of the truck is 50 Km.
Learn more about distance and displacement, here:
https://brainly.com/question/3243551
#SPJ5
Examine the diagram of the cell cycle.
Which label identifies the step labeled W?
Anaphase: chromosomes thicken
Metaphase: chromosomes thicken
Anaphase: chromosomes are pulled apart
Metaphase: chromosomes are pulled apart
Answer:
Anaphase: chromosomes are pulled apart
Explanation:
Anaphase is a very rapid phase of meiosis and mitosis where sister chromatids (during mitosis or meiosis II) or homologous chromosomes (during meiosis I) separate and migrate to opposite poles of the cell. In the image, the diagram represents mitosis (thus separation of sister chromatids).
During this phase, following a specific signal, the sister chromatids separate abruptly. They are then "pulled" by the "microtubules" towards the pole to which they are attached. Chromatids migrate rapidly at a rate of about 1 μm / min. Anaphase is usually divided into two distinct phases.
Answer:
The answer is C
Explanation:
Grade 8 Science Admin. May 2018 Released
37 A physics teacher performed a demonstration for a science class by pulling a crate across the
floor and measuring the force with a spring scale. While she pulled, a student measured the
acceleration of the crate with a handheld electronic device. The results of three trials are
shown below
Motion
F = 900 N
Actual Acceleration
of Crate
Trial
1
140 kg
Acceleration
(m/s)
0.36
0.34
0.38
0.36
2
3
Average
The teacher asked the class to calculate the acceleration of the crate based on the crate's
mass and the force she applied. What conclusion can be made about the difference between
the calculated acceleration and the actual acceleration that occurred in the trials?
A Another force in the direction of the motion produced a lower acceleration than calculated.
B An opposing force caused by friction produced a lower acceleration than calculated.
C Another force in the direction of the motion produced a higher acceleration than
calculated.
D An opposing force caused by friction produced a higher acceleration than calculated,
Answer:
B. An opposing force caused by friction produced a lower acceleration than calculated
Explanation:
Answer:
An opposing force caused by friction produced a lower acceleration than calculated.
Explanation: