Match each type of rock with the way it is formed.
pressure and heat
cooling magma
erosion and deposition
cooling lava
intrusive igneous rock
arrowRight
extrusive igneous rock
arrowRight
sedimentary rock
arrowRight
metamorphic rock

The number of excess electrons contained within the drop of Millikan oil drop experiment is determined as 7 excess electrons.

The excess electrons contained within the drop of Millikan oil drop experiment is calculated as follows;

-1.60 x 10⁻¹⁹ C = 1 electron

-1.12×10⁻¹⁸ C = ? electrons

= ( -1.12×10⁻¹⁸ C) / (-1.60 x 10⁻¹⁹ C )

= 7 excess electrons

Thus, the number of excess electrons contained within the drop of Millikan oil drop experiment is determined as 7 excess electrons.

Learn more about Millikan oil drop experiment here: https://brainly.com/question/28106069

#SPJ1

Density of neutron is 3.9868×10¹⁷kg/m³

Here given data is radius of a neutron=1.0×10⁻¹³ we have to calculate density of neutron=?

Density=mass/volume

For calculations of density of neutron volume is not given here so volume of sphere is 4/3πr³

So ,neutron stars are composed of solid nuclear matter, primarily neutrons

Vₙ=4/3πr³

= 4/3π(1.0×10⁻¹³ × 10⁻²)³

= 4/3π((1.0×10⁻¹⁵)³

= 4.1888×10⁻⁴⁵m³ this is the volume of neutron

Neutron stars are composed of solid nuclear matter, primarily neutrons.

Assuming that a neutron star has the same density as a neutron then,

Density=mass/volume

mass of neutron=1.67×10⁻²⁷

Density=1.67×10⁻²⁷kg/4.1888×10⁻⁴⁵m³

= 3.9868×10¹⁷kg/m³ is the density of neutron

Know more about density

https://brainly.com/question/28614452

#SPJ1

Ionic bonding continued. In the reaction between lithium and oxygen, lithium donates its valence electrons to oxygen atoms.

Li ( Z=3 ) , E.C. 2,1

Lithium will lose one electron to form unipositive ions.

O ( Z=8 ), E. C. 2, 6

Oxygen will gain 2 electrons to form a negative ion

So the formula of Lithium oxide will be Li2O

Hence the number of oxide ions will be half the number of Lithium ions or 1.07 × 10^22 / 2 Or 0.585 × 10^22 ions.

As you can see in the animation to the right, two lithium atoms react with one of her oxygen atoms. Each lithium atom donates an electron to an oxygen atom. In ionic compounds, the total number of cation charges must equal the total number of anion charges. In other words, the connection must be neutral. This is an example of a binary ionic compound consisting of two elements, a cation, and an anion. Lithium, a metal, has a positive charge, and fluoride, a non-metal, has a negative charge, so these two ions are held together by an ionic bond.

Learn more about An ionic here:-https://brainly.com/question/14309645

#SPJ9

Mateo and the officers should secure the crime scene.

To learn more about stages of crime investigation click here:

https://brainly.com/question/15149989

#SPJ1

The specific heat capacity of the given metal is 0.1234 J/g°C.

The specific heat capacity of a metal is the electricity required to elevate one kilogram (kg) of the cloth by one diploma Celsius (°C).

The specific heat capacity of a substance is the heating ability of a pattern of the substance divided by means of the mass of the pattern, also every so often called massic heat ability. precise warmth capability is a measure of the amount of heat power required to change the temperature of 1 kg of a material by 1 k.

q = m x C x DT

q = m x C x ( T f - T i )

q = amount of heat energy gained or lost by a substance

m = mass of the sample

C = heat capacity ( J oC⁻¹g⁻¹ or J K⁻¹ g⁻¹ )

T f = final temperature

T i = initial temperature

-q metal = q water

-(mCΔT) = mCΔT

-( mC (T f-T i ) =  mC( T f-T i )

- (240 g x C x (27°C-150°C) =  150g(4.18J/g°C ) × ( 27°C-21°C )

- ( 240g × C × -127 °C = 150 × 4.18 × 6°C

C =  150 × 4.18 × 6°C / 240g × -127 °

C = 3762 / 30480

C = 0.1234 J/g°C

Learn more about specific heat capacity here:- https://brainly.com/question/21406849

#SPJ1

Answer:

false

Explanation:

Answer:

Answer:Even though the two surfaces are sliding past each other, there can still be a frictional force between the surfaces, but this sliding friction we call a kinetic frictional force.

The number of moles 2.44 x 10²⁴ H₂O molecules will be having is 4.05.

Converting between molecules and moles is done by either multiplying by or dividing by Avogadro's number.  To go from molecules to moles, divide the number of molecules by 6.02 x 10²³.

Avogadro's number, which is equal to 6.022 × 10²³, is the number of units in one mole of any material (defined as its molecular weight in grams). Depending on the substance and the nature of the reaction, the units could be electrons, atoms, ions, or molecules.

Thus,

No. of molecules = No. of moles × Avogadro no.

from the question we know,

No. of molecules = 2.44 × 10 ²⁴

Avogadro no. = 6.02 × 10²³

i.e. 2.44 × 10²⁴ = No. of moles  × 6.02 × 10²³

No. of moles = 2.44 × 10 ²⁴

                         6.02 × 10²³

No. of moles = 4.05

The number of moles 2.44 x 10²⁴ H₂O molecules will be having is 4.05.

To know more about Avogadro no. visit the link:

https://brainly.com/question/11907018?referrer=searchResults

#SPJ9

If the change in enthalpy is positive then reaction must be endothermic, it means all absorb energy while reaction proceed.

Given,

H2S(g) + 2 O2(g) → H2SO4 (l)                      ΔH = –235.5 kJ       Equation (1)

H2S(g) + 2 O2(g) → SO3(g) + H2O(l)          ΔH = –207 kJ          Equation (2)

H2O(l) → H2O(g)                                         ΔH = 44 kJ              Equation (3)

From above given reaction,

Reverse the equation (1) reaction

H2SO4 (l) → H2S(g) + 2 O2 (g)          ΔH = 235.5 kJ            Equation (4)

Adding all equations (2), (3), and (4):

To get overall reaction is:

H2SO4 (l) → SO3 (g) + H2O (g)

Overall ΔH value is:

ΔH = 235.5 kJ - 207 kJ + 44 kJ

ΔH = 72.5 kJ

Overall change in enthalpy is +72.5 kJ.

The reaction is thermodynamically favored

Learn more about Gibb's here

https://brainly.com/question/17512540

#SPJ9

Answer:

the answer is maybe 0.000777

Answer:

c≈0.3418 [J/(gr*K)].

Explanation:

1) formula of heat:

Q=cm(T-t), where Q- energy of heat, c - required specifie heat, m - mass, T and t - initial and final temperatures;

2) according to the formula above:

[tex]c=\frac{Q}{m(T-t)};\\ c=\frac{596}{73*(50-26)}=0.34018264840182648401826484018265[\frac{J}{g*K}].[/tex]

P.S. the differrence in °C is equal the difference in °K.

The difference in electronegativity of the two elements is less than 1.7 represents the covalent bond.

If the electronegative difference is greater than 1.7, the bond's nature is ionic; if it is less than 1.7, the bond's nature is covalent.

The sharing of electrons between atoms is known as covalent bonding. This kind of bonding happens when two atoms of the same or closely related elements in the periodic table come together.

Covalent bonding is seen in  between nonmetals and metals, this bonding typically happens between nonmetals. Covalent bonds are most likely to form when two atoms have comparable electronegativities, or the same affinity for electrons.

Therefore, The difference in electronegativity of the two elements is less than 1.7 represents the covalent bond.

To learn more about covalent bond, refer to the link:

https://brainly.com/question/10777799

#SPJ1

The type of graph that will be to display the data collected by the store keeper is bar graph.

A bar graph can be defined as a chart or a graphical representation of data, quantities or numbers using bars or strips.

Also, a bar graph is a graph that shows complete data with rectangular bars and the heights of bars are proportional to the values that they represent.

Three bar graphs can be used to display the data collected by the store keeper.

Thus, the type of graph that will be to display the data collected by the store keeper is bar graph.

Learn more about bar graph here: https://brainly.com/question/24741444

#SPJ1

For an endothermic reaction, ΔH is positive (>0).

For an exothermic reaction, ΔH is negative (<0).

Learn more about thermodynamics here:

brainly.com/question/13059309

#SPJ9

Answer:

3.83*10⁻²¹ [J].

Explanation:

1) formula:

E=hν, where ν=5.77*10¹²; h=6.63*10⁻³⁴;

2) according to the formula above:

E=577*10¹⁰*663*10⁻³⁶=382551*10⁻²⁶ [J]≈3.83*10⁻²¹[J].

The vapor pressure is obtained as 3.7 atm.

The Clausius-Clapeyron equation is the equation that we could use to obtain the vapor pressure of a solution at any temperature. Of course we would always have two different temperatures to work with.

Hence;

ln(P1/P2) = ΔHvap/R (1/T2 - 1/T1)

P1 = initial pressure

P2 = final pressure

ΔHvap =  enthalpy of vaporization

T2 = final temperature

T1 = initial temperature

ln(1/P2) = 35.2 * 10^3/8.314 (1/338 - 1/307)

ln(1/P2) = 4234(0.00295 - 0.00326)

ln(1/P2) = -1.31

1/P2 = e^-1.31

P2 = 1/e^-1.31

P2 = 3.7 atm

Learn more about Clausius-Clapeyron equation:https://brainly.com/question/13162576

#SPJ1

The effect of using plant food(Miracle grow) is providing nutrients for plants, increasing longevity, and fostering plant growth.

To learn more about miracle grow visit:

https://brainly.com/question/22932899

#SPJ1

Answer:

The wax vapor starts to burn and creates the stable candle flame that you see. When you blew out the candle you should have seen white smoke rising up into the air from the wick. This is the wax vapor, which becomes visible as it condenses into small liquid droplets in the cooler air.

Explanation:

hope it helps

Answer:

This would be my answer and I hope this helps you.

observe that the flame is not touching the solid candle or the melted wax. It appears to be only touching the wick. I ask them if they think that the candle would burn as long if it were only the wick that was burning. What is the purpose of the wax? When the students place the first flame into the smoke of the second candle, they should see the second candle relight. It is not necessary to touch the wick in order for it to relight. This should lead them to conclude that it is the wax vapor that is burning.

When the students place the beaker containing the ice water above the candle, they should see condensation on the bottom of the beaker. If they hold it too close, they will not see the condensation and will see soot form. Students will usually recognize that the condensation is made of water, but they have difficulty recognizing that it comes from the combustion of the candle.

When the Erlenmeyer flask is placed over the top of the candle in the water, student should observe that the water candle goes out and the water rises. The students test the gas that was collected with phenol red solution (an acid-base indicator). They should observe that the solution changes from red to yellow. I demonstrate that this might indicate the formation of carbon dioxide by blowing through a straw into a solution of phenol red.

Explanation:

Hope this helped you!And thanks for inviting me to be your friend!(:

The mass, in grams, of 932 atoms of cesium, Cs is 2.06×10⁻¹⁹ grams

6.02×10²³ atoms = 1 mole of cesium

But

1 mole cesium = 132.91 g

Thus, we can say that:

6.02×10²³ atoms = 132.91 g of cesium

The mass of cesium that contains 932 atoms can be obtained as illustrated below:

6.02×10²³ atoms = 132.91 g of cesium

Therefore,

932 atoms = (932 atoms × 132.91 g) / 6.02×10²³ atoms

932 atoms = 2.06×10⁻¹⁹ g of cesium

Thus, the mass of cesium that contains 932 atoms is 2.06×10⁻¹⁹ grams

Learn more about number of atom:

https://brainly.com/question/28611842

#SPJ1

Answer:

time it takes the pendulum to make one full swing back and forth swing

Answer:

Answer:

d)the time it takes for the bob to swing back and forth once

Explanation:

Time period of any object is defined as the time after which it can complete its one round of repetitive motion

So here in the back and forth motion of simple pendulum we know that it will move to and fro about its mean position and the total time to make its to and from motion is known as its time period

so here correct answer would be

d) the time it takes for the bob to swing back and forth once

for simple pendulum the formula of time period is given as

T = 2\pi \sqrt{\frac{L}{g}}T=2πgL

here we know

L = length of pendulum

g = acceleration due to gravity

The average atomic mass of the two isotopes  is 7346.717 atomic mass units.

Average atomic mass  of an element  is the sum of masses of it's isotopes multiplied by it's natural abundance. The percent of natural abundance of isotope is converted in to decimal form by dividing it by hundred.

It is a fraction representing natural abundance of the isotope .It is found out because there is no mass set for an element.

To calculate average atomic mass, the given data is substituted in the formula,

average atomic mass=abundance×atomic mass of isotope 1 +abundance×atomic mass of isotope 2

=(0.158×71.68)+(99.842×73.47)

=11.3254+7335.39

=7346.71 atomic mass units

Thus, the average atomic mass is 7346.71 atomic mass units.

Learn more about average atomic mass , here:

https://brainly.com/question/13292428

#SPJ1

The mass of calcium hydroxide produced is 42.2g.

A white powder without any smell is calcium hydroxide. It is applied in commercial contexts such sewage treatment, paper manufacturing, building, and food processing. It can be used in dentistry and medicine. In root canal fillings, for instance, calcium hydroxide is frequently used. Slaked lime, often known as calcium hydroxide, is an inorganic substance having the chemical formula Ca(OH)2.

It is created when quicklime is combined or slaked with water and is a colorless crystal or white powder. It goes by a variety of names, including pickled lime, hydrated lime, caustic lime, builders' lime, and slaked lime. Calcium hydroxide, often known as E number E526, is a chemical that is employed in a variety of processes, including the production of food. A saturated solution of calcium hydroxide is known as limewater, often known as milk of lime.

To learn more about calcium hydroxide please visit-
https://brainly.com/question/9584549
#SPJ9

The mass of ammonia gas produced by the given volume of hydrogen and nitrogen is 5.066 g.

The mass of ammonia in grams would be produced at temperature 288 K and a pressure of 0.87 bar is determined using the ideal gas equation.

The ideal gas equation is as follows;

PV = nRT

where;

P is pressure

V is volume

n is number of moles

R is molar gas constant = 8.314 × 10⁻² L.bar.K⁻¹.mol⁻¹

T is temperature in kelvin.

number = mass/molar mass

Considering the data provided, the moles of each gas present in their containers are as follows;

n = PV/RT

moles of nitrogen gas:

P = 0.87 bar,  V = 11.67, R = 8.314 × 10⁻² L.bar.K⁻¹.mol⁻¹, T = 288 K

n = 0.87 * 11.67/8.314 × 10⁻² * 288

n = 0.424 moles

moles of hydrogen gas:

P = 0.87 bar,  V = 12.3, R = 8.314 × 10⁻² L.bar.K⁻¹.mol⁻¹, T = 288 K

n = 0.87 * 12.3/8.314 × 10⁻² * 288

n = 0.447 moles

The equation of the reaction is given below:

N₂ (g) + 3 H₂(g) → 2 NH₃ (g)

From the equation, mole ratio of nitrogen to hydrogen is 1 : 3, therefore, hydrogen is the limiting reactant.

Moles of ammonia gas produced = 0.447 * 2/3 moles

Moles of ammonia gas produced = 0.298 moles

molar mass of ammonia gas = 17.0 g/mol

Mass of ammonia gas produced = 0.298 moles * 17.0 g/mol

Mass of ammonia gas produced = 5.066 g

Learn more about the molar gas constant at: https://brainly.com/question/27445708

#SPJ1

Answer:

Luke 1:15-17

New International Version

15 for he will be great in the sight of the Lord. He is never to take wine or other fermented drink,(A) and he will be filled with the Holy Spirit(B) even before he is born.(C) 16 He will bring back many of the people of Israel to the Lord their God. 17 And he will go on before the Lord,(D) in the spirit and power of Elijah,(E) to turn the hearts of the parents to their children(F) and the disobedient to the wisdom of the righteous—to make ready a people prepared for the Lord.”(G)

The student’s test average points for the four test is 89.3 points

The Mean is defined as the arithmetic average. Mathematically, it can be expressed as:

Mean = (Summation of scores) / number of scores

The following data were obtained from the question:

Average = (Summation of scores) / number of test

Average = 357.3 / 4

Average = 89.3 points

Thus, the student’s test average points for the four test is 89.3 points

Learn more about statistics:

https://brainly.com/question/8974461

#SPJ1

The quantity  in moles of sodium atoms is 0.631 moles of sodium if you have 3.80 × 10²³ moles  of sodium.

Moles is defined as a standard scientific unit for measuring large quantities of very small entities such as atoms, molecules and some other specified particles.

It is a very important unit of measurement which chemist use. It can also be defined as the amount of substance that contain exactly 6.022 x 10²³ elementary entities in a given substances.

1 moles = 6.022 x 10²³ atoms

3.80 × 10²³ atoms of sodium will have

3.80 × 10²³  x 1 mole of Na /  6.022 x 10²³ atoms

= 0.631  moles of Na

Thus, quantity  in moles of sodium atoms is 0.631 moles of sodium if you have 3.80 × 10²³ moles  of sodium.

To learn more about moles, refer to the link below:

https://brainly.com/question/26416088

#SPJ1

Mass of chromium contained within a sample of chromium (III) chloride with mass of 83.1g is 27.25 g

Given,

chlorine present in 15.8 g of sample of chromium (III) chloride is 10.6g

we have to find out mass of chromium present in 83.1 g of chromium (III) chloride.

First step is to find out mass percentage of chlorine and chromium atom in CrCl3.

No. of atoms of chromium in chromium (III) chloride = 1

molar mass of chromium = 52 g/mol

Total mass of element = 52 × 1 = 52

No. of atoms of chloride in chromium (III) chloride = 3

molar mass of chloride = 35.5g/mol

Total mass of element = 35.5 × 3 = 106.5

Total mass of chromium (III) chloride = 158.5 g/mol

mass percentage of chromium = 32.8 %

mass percentage of chloride = 67.1 %

So, the mass of chromium present in chromium (III) chloride = (32.8 / 100) × 83.1

= 27.25 g

Therefore mass of chromium in 83.1g of chromium (III) chloride is 27.25 g

Learn more about mass percentage here:

https://brainly.com/question/15182450

#SPJ9