motion is a change in

Answer:

0 j

Explanation:

The work done by the employee on the box at the given zero displacement is 0 J.

The given parameters;

The work done by the employee on the box is calculated as follows;

W = Fd

where;

Since the employee sits on the box without moving it, the distance moved by the box = 0

W = 500 x 0

W = 0 J

Thus, the work done by the employee on the box is 0 J.

Learn more about work done and displacement here: https://brainly.com/question/8635561

Answer:

no

gravitational force between them is far smaller than the frictional force between the guy and the bench

Given that,

Mass of the object, m = 1 kg

It moves in a circle of radius 0.5 m with a speed of 5 m/s

To find,

The direction of the acceleration.

Solution,

Whenever an object moves in a circular path, the only force that acts on its is centripetal force which is given by the formula as follows :

[tex]F=\dfrac{mv^2}{r}[/tex]

The centripetal acceleration acts in the direction of force. It acts along the radius of the circular path. In this figure, the direction of the acceleration is shown at point d.

Answer:

D!

Explanation:

took the test

The horizontal distance of the penny from the base of the table is v(2y/g)^1/2.

The distance the coin lands from the base of the table is 1.0 m

The time of motion of the penny is calculated as follows;

y = vt + ¹/₂gt²

where;

y = ¹/₂gt²

2y = gt²

t² = 2y/g

t = √(2y/g)

The horizontal distance of the penny is calculated as;

X = Vₓt -----(1)

where;

Substitute the value of "t" into equation (1)

X = v(√(2y/g)),

X = v(2y/g)^1/2, shown

Use the formula above to determine the distance the coin lands from the base of the table.

X = v(√(2y/g)),

X = 3.5[√(2x0.4/9.8)]

X = 3.5(0.2857)

X = 1.0 m, shown

Learn more about time of motion here: https://brainly.com/question/28180340

#SPJ1

Golf carts have a high velocity.

Without any improvements, the conventional golf cart's peak velocity is between 12 and 14 miles per hour. The highest velocity that you can get on a golf cart without any upgrades or modifications is around 14 mph.

We can determine how quickly or slowly an item is traveling using the phrases velocity and speed. It occurs to us frequently that we must determine which of two or more moving things is traveling quicker. If both vehicles are traveling in the same direction along the same route, it is simple to determine which is quicker. It is challenging to identify who is moving quickest when their direction of motion is opposing. The idea of velocity is useful in these situations.

When gravity first exerts force on an item, its initial velocity defines how quickly the thing moves. The final velocity, on the other hand, is a vector number that gauges a moving body's speed and direction after it has attained its maximum acceleration.

To learn more about velocity visit:https://brainly.com/question/18084516

#SPJ4

The magnitude of the velocity of the truck relative to the car is 183.9 km/h

The direction of the velocity of the truck relative to the car is 67 ⁰ north of west.

The velocity of the truck relative to the car is the resultant velocity of the vehicles.

The resultant velocity of the car is calculated as follows;

Vyi = 119 km/h

Vy2 = 87.7 km/h x sin(35) = 50.3 km/h

Vy(total) = 119 km/h + 50.3 km/h = 169.3 km/h

Vx = -87.7 x cos(35) = -71.84 km

v = √Vy² + Vx²

v = √[(169.3²) + (-71.84)²]

v = 183.9 km/h

θ = arc tan(Vy/Vx)

θ = arc tan(169.3 / -71.84)

θ = -67 ⁰

θ = 67 ⁰ north of west.

Thus, the magnitude of the velocity of the truck relative to the car is 183.9 km/h and the direction of the velocity of the truck relative to the car is 67 ⁰ north of west.

Learn more about resultant velocity here: brainly.com/question/24767211

#SPJ1

Answer:

B. 2 Hz

Explanation:

Given parameters:

Period of the wave  = 0.5Hz

Unknown:

Frequency of the wave  = ?

Solution:

Frequency is the number of waves that passes through a point.

Period is the time taken for a number of waves to pass through a point.

  Period is the inverse of frequency

  Frequency  = [tex]\frac{1}{t}[/tex]  

 t is the period

  Frequency  = [tex]\frac{1}{0.5}[/tex]  = 2Hz

Answer:2

Explanation:

Answer:

6sec and 8 postion

Explanation:

Answer:

2700

Explanation:

because calculate the minute1=60×45=2700

Answer:

[tex]v \approx 30.67\,\,\frac{m}{s}[/tex]

Explanation:

We use the kinematic formula for constantly accelerated motion given below:

[tex]v^2=v_0^2+2\,a\Delta x\\v^2=0+2\,g\,(48)\\v^2=940.8\\v \approx 30.67\,\,\frac{m}{s}[/tex]

Given that,

Mass of a girl, m  = 50 kg

Mass of the boat, m' = 300 kg

Speed of girl, v = 3 m/s

To find,

The velocity with which the boat begin to move backwards.

Solution,

Let the velocity be v'. Using the conservation of momentum to find it. It is given by :

[tex]mv=m'v'\\\\v'=\dfrac{mv}{m'}\\\\v'=\dfrac{50\times 3}{300}\\\\v'=0.5\ m/s[/tex]

So, the velocity moves backward with a speed of 0.5 m/s.

Answer:

c.) 10 to 15 minutes

Explanation:

yw :)

Answer:

c.) 10 to 15 minutes

Explanation:

Answer:

When these waves reach our ears, they make our eardrums vibrate, and we hear the sound of the bell ringing.

Explanation:

Answer: When a bell is pounded, the metal vibrates. The vibrations travel through the air as sound waves. When these waves reach our ears, they make our eardrums vibrate.

Explanation:

We hear the sound of the bell ringing. Sound always needs to travel through some kind of medium, such as air, water, or metal.

Sorry if this is not the answer you are looking for

Answer:The direction a wave propagates is perpendicular to the direction it oscillates for transverse waves. A wave does not move mass in the direction of propagation; it transfers energy.

Explanation:

Answer:

The second drop is 3.75 m above the ground

Explanation:

Free Fall Motion

A free-falling object falls under the sole influence of gravity without air resistance.

If an object is dropped from rest in a free-falling motion, it falls with a constant acceleration called the acceleration of gravity, which value is [tex]g = 9.8 m/s^2[/tex].

The distance traveled by a dropped object is:

[tex]\displaystyle y=\frac{gt^2}{2}[/tex]

If we know the height h from which the object was dropped, we can find the time it takes fo hit the ground:

[tex]\displaystyle t=\sqrt{\frac{2y}{g}}[/tex]

When the first drop touches the ground there are two more drops in the air: the second drop still traveling, and the third drop just released from the tap.

The total time taken for the first drop to reach the ground is:

[tex]\displaystyle t_1=\sqrt{\frac{2*5}{g}}[/tex]

[tex]t_1 = 1.01\ s[/tex]

Half of this time has taken the second drop to fall:

[tex]t_2 = 1.01\ s/2=0.505\ s[/tex]

It has fallen a distance of:

[tex]\displaystyle y_2=\frac{9.8(0.505)^2}{2}[/tex]

[tex]y_2 = 1.25\ m[/tex]

Thus its height is:

h = 5 - 1.25 = 3.75

The second drop is 3.75 m above the ground

Answer: c. 1.89 x 10^14 J

Explanation:

By Einstein's equation, we know that:

E = m*c^2

Where m is the mass-consumed in this case:

m = 2.10g

And we must rewrite this in Kg, knowing that:

1kg = 1000g

Then:

m = 2.10g = (2.10/1000) kg = 0.0021 kg

And c is the speed of light:

c = 3*10^8 m/s.

Then the energy will be:

E = 0.0021 kg*(3*10^8 m/s)^2 = 1.89*10^14 Joules.

The correct option is:

c. 1.89 x 10^14J

Answer:

Electromagnetic waves carry energy.

Explanation:

The waves consist of transverse vibrations in electrical and magnetic fields, not vibrating particles.

density of object is 6.7g/cm³  and volume is 30cm³.

First, air has a low density, so the mass in air is very close to the true mass (mass in a vacuum). Let's say the true mass is 200g.

Then we can use the following formula to find the volume:

AM=TM-V•D where AM is the apparent mass (in water) and TM is the true mass (mass in vacuum which approximates mass in air). , V is the volume of water displaced by the object (which is also the volume of the object) and D is the density of the water, i.e.

170g=200g-V*(1,000g/cm3)

V=30cm³

Therefore The density of is approximately 200g÷30cm³=6.7g/cm³

If you want an exact answer, you can find the density of air under laboratory conditions. For example,

1.20g/L or 0.00120g/cm³. Then, using the above equations, we can set up a system of two equations with two unknowns.

200g=TM-V*(0.00120 g/cm³)

170g=TM-V*(1.000 g/cm³)

Learn  more about density here https://brainly.com/question/1354972

#SPJ9

Answer:

The last one

Explanation:

on the exam

Among the following the derived demands are options 1 and 3 only. Because in each case, the demand for one thing is originated  by the demand for another.

The phrase derived demand in economics refers to the demand for a factor of production or intermediate good that results from the demand for another intermediate or final good. In essence, consumer demand for the firm's product determines how much a firm will need.

Additionally, if activity in one area rises, any sector that contributed to the success of the first sector may also experience growth. Here, the school is hiring more teachers because enrollment is increased. Thus, enrolling more teachers satisfies the demand by greater enrollments.

Similarly by recruiting more construction workers the increased demand for new house by people can be solved. However, the second case for filling the attendance is a necessary and not a derived demand.

To find more on derived demand, refer here:

https://brainly.com/question/14056210

#SPJ2

The amount of work required to slide the 3 Kg box 6.90 m along (up) the frictionless incline plane is 183.85 J

Work is defined as the product of force and distance moved in the direction of the force. mathematically it is expressed as:

Work done (Wd) = force (F) × distance (d)

Wd = fd

Where height is involved, the workdone is given as as:

Work done (Wd) = mass (m) × acceleration due to graity (g) × height (h)

Wd = mgh

Considering angle projection,

Wd = mghCosθ

Thus, we can detertmine the work done as follow:

Wd = mghCosθ

Wd = 3 × 9.8 × 6.9 × Cos 25

Wd = 183.85 J

Learn more about workdone:

https://brainly.com/question/14667371

#SPJ1

1 x 10⁻¹² C are stored in the system.

The power required to move a charge in opposition to an electric field is known as electric potential energy. A charge must be moved through a stronger electric field with more energy, but it also must be moved through a weaker electric field with more energy.

Electric potential at a place in an electric field is the amount of work done to move the unit positive charge from infinity to that point, and electric potential energy is fundamentally different.

Given are the following values: Stored charge, Q= 1x 10⁻¹⁰ C Voltage, V=100 v

We are aware that the formula for a system's capacitance is C=Q/V

= 1 x 10⁻¹⁰ / 100.

=1 x 10⁻¹² C

As a result, it is the necessary remedy.

Learn more about electric potential energy here-

https://brainly.com/question/12645463

#SPJ9

The car will continue at half speed and slow down due to friction after the brakes are released.

The given situation is that the car's motor is stopped and brakes are applied until the car reaches its half speed and the brakes are released. So after the brakes are released, the car will not gain any speed, since there is no force applied. Then it will gradually slow down due to friction.

According to the law of inertia ( i.e., Newton's first law of motion ), an object will tend to stay at rest or motion until an external force is applied. So based on this law, the car will continue at the speed the brakes were released and eventually slow down.

Therefore, the car will continue at half speed and slow down due to friction after the brakes are released.

To know more about law of inertia

https://brainly.com/question/18128368

#SPJ1

Answer:

3400 m

Explanation:

Both lightning and thunder happen at the same time but one is faster than the other. The distance traveled by a sound can be calculated from its speed such that;

 speed = distance/time, hence, distance = speed x time.

For a thunder with 340 m/s speed and 10 seconds away from lightning, the distance between the thunder and the lightning can be calculated as;

distance = 340 m/s x 10 s = 3400 m

Answer:

T = 10 s

Explanation:

First, we need to find the frequency of the object as follows:

[tex]Frequency = f = \frac{Speed\ in\ rpm}{60}[/tex]

where,

Speed = Angular Speed = 6 rpm

Therefore,

[tex]f = \frac{6\ rpm}{60}\\\\f = 0.1\ Hz[/tex]

Now, for time period (T):

[tex]Time\ Period = T = \frac{1}{f}\\\\T = \frac{1}{0.1\ Hz}\\\\[/tex]

T = 10 s

Answer:

Explanation:

4 is right

Answer:

potential energy

Explanation:

The bent ruler possesses elastic potential energy.  

• The bending of the ruler depends upon the material of which it is made up of.  

• The ruler after bending will gain elastic potential energy.  

• The energy stored as an outcome of applying a force to deform an elastic object is known as the elastic potential energy.  

• This energy is stored unless and until the removal of force takes place and the ruler moves back to its original shape.  

• When the energy is released or when the bent ruler is released from the left hand, then the potential energy stored in it gets convert to kinetic energy and the ruler will recoil or vibrate briskly.  

Thus, it is the elastic potential energy gained by the ruler when one bent it with the left hand.

To know more about:

https://brainly.com/question/25832781

Answer:

The value is  [tex]f = 0.36 \ m[/tex]

Explanation:

From the question we are told that

  The radius of curvature is  [tex]R = 0.72 \ m[/tex]

Generally the radius of curvature is mathematically represented as

        [tex]R = 2f[/tex]

Here [tex]f[/tex] is the focal length hence

       [tex]f = \frac{R}{2}[/tex]

=>     [tex]f = \frac{0.72}{2}[/tex]

=>     [tex]f = 0.36 \ m[/tex]

Answer: The acceleration is roughly 9.3 m/s^2

The acceleration is positive.

=====================================================

Work Shown:

Using Newton's Second Law, we get,

F = m*a

52 = 5.6a

5.6a = 52

a = 52/5.6

a = 9.28571428571429 which is approximate

a = 9.3

I rounded to 2 significant figures because both 52 and 5.6 are to 2 sig figs.

The acceleration is positive because the student applied an upward force.

The units for the acceleration are in meters per second squared, abbreviated as m/s^2.

An acceleration of 9.3 m/s^2 means that after every second, the velocity has increased by 9.3 m/s.

Given the speed of the driver and the time elapsed, distance traveled during his inattentive period is 0.037 kilometers.

Speed is simply referred to as distance traveled per unit time.

Mathematically, Speed = Distance ÷ time.

Given the data in the question;

First, convert 1.7 seconds to hours.

Time = 1.7s = (1.7 / (60×60)hr = 1.7/3600 hrs

Now, find the distance traveled during the inattentive period.

80 km/h = Distance ÷ 1.7/3600 hrs

Distance = 80 km/h × 1.7/3600 hrs

Distance = 136/3600 km

Distance = 0.037 km.

Given the speed of the driver and the time elapsed, distance traveled during his inattentive period is 0.037 kilometers.

Learn more about speed and distance here: brainly.com/question/7359669

#SPJ1

Answer:

i believe that they are or there's something out there

Explanation:

:)