PLEASE HELP!!! I'll give brainliest answer

Explanation:

Enantiomers are pairs of non-identical molecules that are non-superimposable mirror images of each other and that have at least one chiral carbon or chiral center, making them chiral compounds. They have similar chemical properties, except for when they interact with other chiral compounds.

Answer:

"a chemical reaction in which acid and a base react quantitatively with each other"

Explanation:

The highest boiling point : A) 0.10 M lithium sulfate, Li₂SO4

Solutions from volatile substances have a higher boiling point and lower freezing points than the solvent  

ΔTb = Tb solution - Tb solvent  

ΔTb = boiling point elevation  

[tex] \large {\boxed {\boxed {\bold {\Delta Tb \: = \: Kb.m}}} [/tex]  

Kb = molal boiling point increase  

m = molal solution  

For electrolyte solutions there is a van't Hoff factor = i  

i = 1 + (n-1) α  

n = number of ions from the electrolyte  

α = degree of ionization, strong electrolyte α = 1, for non electrolytes i = 1  

So ΔTb   ≈ i(van't Hoff), the greater i, the greater ΔTb

α = 1 ,  strong electrolyte

A) 0.10 M lithium sulfate, Li₂SO4

Li₂SO4 ⇒2Li⁺+SO₄²⁻ ⇒n=3

B) 0.10 M hydrochloric acid, HCI

HCl⇒H⁺+Cl⁻⇒n=2

C) 0.10 M lithium nitrate, LINO₃

LINO₃ ⇒ Li⁺+NO₃⁻ ⇒n=2

D) 0.10 M magnesium sulfate, MgSO4​

MgSO4​ ⇒ Mg²⁺ + SO₄²⁻ ⇒ n=2

Answer:

Explanation:

The essential though process is to ask oneself when converting grams to moles=>  'How many formula weights are in the given mass?' This directs one to divide the substance's formula weight into the given mass (in grams) on order to determine number of moles. That is ...

moles = Given Mass of Substance in grams / formula weight of substance in grams

= 1578 grams / 791 grams-mol.⁻¹ =1.995 mole ≅ 2 moles

Answer:

180 g

Explanation:

At the end of the reaction, the mass is still expected to be 180g this is because in every chemical reaction, mass must be conserved.

According to the law of conservation of mass "in a chemical reaction, matter is neither created nor destroyed".

Answer:2.2

Explanation:

Answer:

It would produce ethane (CH₃CH₃)

Explanation:

Ethylmagnesium bromide (CH₃CH₂MgBr) is a Grignard's reagent.

It is a highly reactive substance, and as any alkylmagnesium bromide

(R-CH₂MgBr) it reacts with water to produce an alkane (R-CH₃). R stands for any carbon structure bonded to that functional group.

Answer:

Explanation:

The proposed structural formula for compound A can be seen in the diagram below with its reaction mechanism. In the first SN2 reaction, we could see how anime reacts with the primary alkyl bromide since it is more reactive. However, the product derived undergoes a subsequent SN2 reaction in the second stage to produce a cyclic product.

Answer:

4-5

Explanation:

maybe 5

Answer:

Al is above H on the activity series

Explanation:

The given chemical reaction is expressed as:

            2Al + 6HBr →  2AlBr₃ +  3H₂

The reaction above is a single displacement or replacement reaction and will only occur if Al is above H on the activity series.

Answer:

A 9 moles of reactants changes into 11 moles of product

Explanation:

Answer:

Sodium and Argon

Explanation:

Answer:

distillation of a mixture

Explanation:

Answer:

A.) Distillation of mixture.

Explanation:

edge 2021

Answer:

[tex] \huge 9[/tex]

Explanation:

The pH of a solution can be found by using the formula

[tex]pH = - log [ { H_3O}^{+}][/tex]

From the question we have

[tex]pH = - log(1 \times {10}^{ - 9} ) [/tex]

We have the final answer as

Hope this helps you

they deserve a brainliest :)

Answer: here lol

Explanation:

hope it helps just read very carefully

The number of vum the man can trade for is = 108 vum

The number of sop the man has = 4 sop.

But the exchange rates are as follows:

1 fot = 5 vum,

2 sop = 3 tuz,

4 bef = 5 tuz,

9 fot = 2 bef

Using,

2 sop = 3 tuz,

4sop = X tuz

X tuz = 4×3/2 = 13/2 = 6 tuz.

Using,

4 bef = 5 tuz,

X bef = 6 tuz

X bef = 6×4/5

X bef =24/5 = 4.8 bef

Using,

9 fot = 2 bef

X fot = 4.8 bef

X fot = 9 × 4.8/2

X fot = 21.6 fot.

Using,

1 fot = 5 vum,

21.6 fot = X vum

X vum = 5 × 21.6/1

X vum = 108 vum

Learn more about exchange rates here:

https://brainly.com/question/25970050

#SPJ1

Answer:

See explanation and image attached

Explanation:

The  acid-catalyzed hydration of alkenes is an ionic reaction. Being an ionic reaction, a carbocation is formed in the process. This carbocation is capable of rearrangement to yield different products based on thermodynamic stability.

Remember that the order of stability of carbocations is; methyl< primary<secondary< tertiary. The rearrangement of carbocations leads to the formation of more stable intermediates and consequently more stable products.

However, the alkene in the image shown yields 1-methylcyclohexanol  without carbocation rearrangement.

Answer: Electrophilic addition reaction

Explanation:

Alkenes are compounds which have at least one double bond between the carbon atoms in the molecule. This is an indication of a shortage of hydrogen atoms. The compound is said to be unsaturated. As an unsaturated compound alkene undergoes the following reaction:

-- Combustion reaction

-- Hydrogenation reaction

-- Addition reaction.

The addition reaction of alkenes occur due to the presence of pi electrons in which an electrophile attacks the carbon-carbon double bond to form the addition products. An electrophile is a molecule that has the affinity to react with other molecules containing a donatable pair of electrons.

A typical example of reaction between alkene and acid is in the decolourisation of acidified potassium tetraoxomanganate(VII) with ethene. The oxygen supplied to the reaction breaks the double bond to yield ethane 1,2 diol ( an alcohol).

The reaction of an alkene with the acid has been performed with the carbocation intermediate formation, followed by the nucleophilic substitution reaction.

The alkenes have been the hydrocarbons with the presence of one double bond in the structure. The double bond has been consisted of the pi electrons.

The alkene has been bonded with the pi-electron, thus in the chemical reaction the pi bond-breaking results in the partial negative and positive charge to the carbon atoms. The negative OH group has been the nucleophile that is attracted by the negatively charged carbon atom, and the bond formation results in the alcohol.

The reaction for an alkene with acid has been given in the image attached.

Thus, the reaction of an alkene with the acid has been performed with the carbocation intermediate formation, followed by the nucleophilic substitution reaction.

For more information about the reaction mechanism, refer to the link:

https://brainly.com/question/24924720

Answer:

pretty sure it's heterogeneous

Explanation:

Also, I saw you added me as a friend and I'm kinda curious as to why :)

Answer:

Heterogeneous mixture

Explanation:

Answer:

probably b i got nothing but i hop eit is good

Explanation:

Answer:

n = 3.77 mol

Explanation:

Given data:

Number of moles = ?

Volume of gas = 10.0 L

Pressure = 8.91 atm

Temperature = 287.4 K

Solution:

Formula:

PV = nRT

R = general gas constant = 0.0821 atm.L/ mol.K

by putting values,

8.91 atm × 10.0 L = n × 0.0821 atm.L/ mol.K ×287.4 K

89.1 atm.L = n × 23.60 atm.L/ mol

n =89.1 atm.L / 23.60 atm.L/ mol

n = 3.77 mol

Answer:

b) Glucitol

Explanation:

The glucose loses the carbonyl group and its transformed to CH2OH

Answer:

D - Flash Disk

Explanation:

The given question is incomplete, the complete question is:

Determine the vapor pressure (in atm) of water in an aqueous solution of 12% by mass ethylene glycol (antifreeze) if the vapor pressure of pure water at that temperature is 0.095 atmospheres.

Answer:

The correct answer is 0.091 atm.

Explanation:

Based on the given information, the mass of ethylene glycol is 12% by mass, which means 12 grams of ethylene glycol dissolved in 88 grams of water.

The moles of a substance can be determined by using the formula,

Moles = Weight/molecular mass

Number of moles of water = mass/molecular mass

= 88g/18g/mol

= 4.88 moles

Number of moles of ethylene glycol = Mass/molecular mass

= 12 grams/62g/mol

= 0.193 moles

Mole fraction of water will be,

Mole fraction = number of moles of water/Number of moles of water+Number of moles of ethylene glycol

Mole fraction = 4.88/4.88+0.193

= 0.961

Vapor pressure of water can be determined by using the formula,

Vapor pressure = Vapor pressure of pure water * Mole fraction of water

= 0.095 * 0.961

= 0.091 atm.

So there are two aluminum atoms, three sulfur atoms, and 12 oxygen atoms in a single unit of the compound Al2(SO4)3.

Chemical element aluminum has the atomic number 13 and the letter Al assigned to it. The density of aluminum is around one third that of steel, which is less than that of most common metals. When exposed to air, it generates an oxidized layer that protects the surface because to its strong affinity for oxygen. With regard to color and light-reflecting properties, aluminum has a striking visual similarity to silver. It has a soft, ductile, and non-magnetic texture.

Aluminum is the twelfth most frequent element in the universe and has only one stable isotope, 27Al, which is also quite abundant. Radiodating employs the radioactivity of 26Al.

Chemically, aluminum belongs to the boron group and is a post-transition metal.

To learn more about aluminum from the given link:

https://brainly.com/question/11952150

#SPJ4

Answer:

Geosphere

Explanation:

Geosphere sometimes called as lithosphere starts from the surface of the earth and lies till crust. This part of the earth contains rocks and minerals.

This portion of the earth includes sediments,mountains and rock. The natural resources that is available to the human brings lies in geosphere.

Answer:

send a pic or more info

Explanation: