Answer:They occur when the Earth, the Sun, and the Moon are in a line. The gravitational forces of the Moon and the Sun both contribute to the tides.Spring tides occur during the full moon and the new moon. During the moon's quarter phases the sun and moon work at right angles, causing the bulges to cancel each other.
Neap tides occur during the first and third quarter moon, when the moon appears "half full." NOAA's tide and tidal current predictions take into account astronomical considerations due to the position of the moon and the sun.
Explanation:
My water bottle contains 500 grams of water, H2O. How many moles of water is this?
Answer:
18g6.02×1023molecules=500gx. 18 g 6.02 × 10 23 molecules = 500 g x .
Explanation:
What chemical reaction takes place when removed from bond( as shown above)?
Answer:
Dehydration synthesis involves the formation of new chemical bonds between two molecules which leads to the formation of new compounds. A reaction occurs with the loss of water molecules at each step.
What mass of mercury contains the same number of atoms as 90.15g of helium?
4.5g of mass of mercury contains the same number of atoms as 90.15g of helium.
What is mercury?With the atomic number 80 and the symbol Hg, mercury is a chemical element. Formerly known as hydrargyrum, which is a combination of the Greek terms hydor (water) and argyros), it is also known as quicksilver (silver). The only other element that is known to be liquid under these conditions is the halogen bromine, however metals like caesium, gallium, and rubidium melt just above ambient temperature. Mercury is a heavy, silvery d-block element.
All around the world, deposits of mercury, primarily in the form of cinnabar, are found (mercuric sulfide). Cinnabar, either natural or manufactured mercuric sulfide, is ground to create the crimson pigment vermilion.
To learn more about mercury from the given link:
https://brainly.com/question/24257702
#SPJ4
f Earth suddenly weighed twice as much as it currently does, how would this change the tides? Explain.
Answer:
yes and no
Explanation:
mostly yes because of the gravity but we would de dead
As the weighed of the earth doubled, gravity also increases. So, there will be fewer or no high tides.
What is gravity? The force that pulls items toward the centre of a planet or other entity is called gravity. All of the planets are kept in orbit around the sun by gravity.Gravity applies to everything that has mass. Gravity is stronger for objects with higher mass. Along with distance, gravity weakens as well.The gravitational pull of two things becomes stronger the closer they are to one another. The mass of the Earth is what creates gravity. The combined gravitational force of all of its mass acts on the mass in your body. What gives you weight is that. The moon is maintained in its orbit around Earth by gravity, as are the planets in their orbits around the sun. Ocean tides are a result of the moon's gravitational effect on the oceans. The stuff that stars and planets are comprised of is pulled together by gravity to form them.To learn more about gravity, refer to
https://brainly.com/question/9934704
#SPJ2
(ii) An element A is in period 3 and it loses three electrons to form an ion. (a) Write the electronic configuration of atom A. (B) Calculate the number of atoms in element A if it has a mass of 27.0g.[5.022x10^23] (c)What is the name of the ion formed?
The aluminum ion, Al3+, is produced when an aluminum atom loses three electrons, and the magnesium ion, Mg2+, is produced when a magnesium atom loses two electrons. Atoms of elements that lose electrons gain a positive charge.
The three valence electrons in aluminum are lost, forming a cation with a positive charge of three: These cations have names that correspond to the metals that they are made of the octet rule is not always followed by transition elements and the metals to their right; frequently, they create more than one cation. Ionization is the process by which ions are created when an atom or molecule gains or loses an electron.
Learn more about Aluminum here-
https://brainly.com/question/9496279
#SPJ9
Part C
How many grams of H₂ are needed to produce 12.13 g of NH3?
Grams of H[tex]_{2}[/tex] are needed to produced 12.13 g of NH[tex]_{3}[/tex] are 2.13 g
The balanced chemical equation is :
N[tex]_{2}[/tex] + 3H[tex]_{2}[/tex] ------> 2NH[tex]_{3}[/tex]
H = 1 g/mol and N =14 g/mol
NH[tex]_{3}[/tex] = 17 g/mol =
6g of H[tex]_{2}[/tex] ( 3×2) = 34 g of NH[tex]_{3}[/tex] (2× 17)
mass of hydrogen in coumpond ( % mass ) = 6 / 34
= 0.1764 or 17.64%
mass of H[tex]_{2}[/tex] required = % mass × mass of ammonia
= ( 0.1764 × 12.13 ) g
2.13 g
Thus , Grams of H[tex]_{2}[/tex] are needed to produced 12.13 g of NH[tex]_{3}[/tex] are 2.13 g
To learn more about ammonia here
https://brainly.com/question/1098222
#SPJ1
The density of mercury is 13.6 g/mL. What is this density in lb/ft3? (1 kg =
2.2046 lb; 1 in = 2.54 cm (exact); 1 mL = 1 cm3) [This problem MUST be solved all in one
string.]
The density of mercury is 13.6 g/ml, then the density in Ib/ft³ is 21.57 Ib/ft³.
What is density?Density can be defined as the measure to how much matter is contained in a specific volume. It can also be defined as a expression of relationship between the mass and the volume.
Dimension of density are ML⁻³
1 kg = 2.2046, 1 ml = 1 cm³
Then, 13.6 g/ml = 13.6 x 2.2046 x 2.54
= 76.16 Ib/cm³ = 21.57 Ib/ft³
Thus, the density of mercury is 13.6 g/ml, then the density in Ib/ft³ is 21.57 Ib/ft³.
To learn more about density, refer to the link below:
https://brainly.com/question/15164682
#SPJ1
Periodic trends answer key chemistry 10th grade
Trends in modern periodic table are:
variation of valency, atomic size , metallic properties and electronegativity
Valency - number of valence electrons . Elements of each group have same number of valence electrons. So, they have the same valency.
Atomic size- It is distance from the centre of the nucleus to the valence shell of the atom.
Along the period – Atomic radius decreases as effective nuclear charge increases . It pulls valence electrons closer to the nucleusDown the group – Atomic radius increases because new shells are added , thus the distance between nucleus and valence electrons increases.Metallic properties -
Along the period – Metallic character decreases because tendency to lose valence electrons decreases due to the increasing nuclear charge.Down the group – As the distance between nucleus and outermost electron increases, nuclear pull decreases. This increases the tendency of an atom to lose valence electrons, thus metallic character increases.Electronegativity-
Along the period – Electronegativity increases as the tendency to gain electrons in valence shell increases due to increasing nuclear charge. Down the group – Since distance between the nucleus and valence shell increases, nuclear pull decreases. This decreases tendency of atom to gain an electron, thus electronegativity decreases.So we can conclude that periodic trends are specific patterns which are present in the periodic table, that illustrate different aspects of a certain element
Learn more about periodic trends at https://brainly.com/question/3388510
#SPJ9
Which factor affects the temperature of ocean water?
depth
salinity
number of organisms
amount of dissolved gases
The factor affecting the temperature of ocean water among the given options is depth of the ocean.
The temperature of ocean water varies with the depth. Ocean is divided into the three layers depending on the depth. In the ocean, solar energy reflects in upper surface and rapidly gets absorbed with the depth. Upper layer has depth of around 500 m and temperature 20°C - 25°C.
Second layer is thermocline layer with relatively low temperature of water. It indicates that, the deeper you go into the ocean, less sunlight is there. Therefore, deeper oceans are colder.
Deep ocean water is around 90% of the volume of oceans. It has uniform temperature of around 0-3°C.
Temperature and depth are related in such a way that the temperature decreases when the depth increase.
To learn more about temperature,
brainly.com/question/16792485
#SPJ1
Answer:
It is A. DepthExplanation:
Hope this helps
Which of the following contains as many atoms as 18 g of water, H₂O?
a) one mole of nitrogen, N2
b) two moles of nitrogen, N2
c) two moles of sodium chloride, NaCl
d) three miles of zinc, Zn
Science Investigatory Project title ideas
Explanation:
What noise pollution affecting local fauna...what harmful particulates are in the air we breath?
Toxic Coliforms in drinking water? Is light pollution affecting diurnal plants? Chlorine is toxic, Why is it in our tap water?
An atom of sodium -23 has a net charge of +1 identify the number of protons, neutrons, and electrons in the atom. Then explain how you determine the number of each type of particle. Use the periodic table to help
The number of each type of particle is:
The number of protons is 11
The number of neutrons is 12
The number of electrons is 10
A proton is a stable subatomic particle with the symbols p, H+, or 1H+ and an electric charge of +1 e. Its mass is 1836 times greater than that of an electron and only slightly less than that of a neutron. Every atom's nucleus contains one or more protons. The defining characteristic of an element is its atomic number, which is the number of protons in its nucleus (represented by the symbol Z).
The neutron, symbol n or n0, is a subatomic particle with a neutral charge and slightly more mass than a proton. Atomic nuclei consist of protons and neutrons. With the exception of the hydrogen nucleus, which has a single proton, neutrons are necessary for the stability of nuclei. Nuclear fission and fusion generate a ton of neutrons.
For a neutral Na, Sodium atom:
The mass number P+N = 23
Atomic number (E or P) = 11
A charged Na atom that has lost an electron is positively charged and so: Number of Protons = 11 (Still the same)
Number of neutrons = 12
Number of electrons = 11-1=10 (the atom has lost an electron)
If an atom loses an electron, it becomes positively charged ie. P>E
Learn more about protons, and neutrons here: https://brainly.com/question/13131235
#SPJ9
how would you distinguish between hydrogen and carbon dioxide being evolved from a reaction?
Answer:
I don't understand snap the equation and send it
Mary studies plants. Which branch of science dose she work in?
Answer:The branch pf science that Mary works in is botany because botany is the study of plants.
Can the individual substances in a homogeneous mixture be physically separated from each other?
Answer:
No
Explanation:
They are bonded on a molecular level and a chemical process must be used to separate
The percent by mass of oxygen in H4P2O7
The percent by mass of oxygen in H₄P₂O₇ is 62.92%.
How to calculate percentage by mass?The percentage by mass of an element in a compound can be calculated by dividing the atomic mass of the element by the molar mass of the compound multiplied by 100 as follows:
% by mass = atomic mass of O/molar mass of H₄P₂O₇ × 100
The molar mass of H₄P₂O₇ can be calculated as follows:
1(4) + 31(2) + 16(7) = 178g/mol
Percent by mass of oxygen = (112g/mol ÷ 178g/mol) × 100
Percent by mass of oxygen = 62.92%
Therefore, 62.92% is the percent by mass of oxygen.
Learn more about percentage by mass at: https://brainly.com/question/16885872
#SPJ1
A canister with fixed volume at 97.2 kPa and 23.0°C is
to a pressure of 1.88 atm. What is the final
in the canister in degrees Celsius?
compressed
temperature
The final temperature of the canister is 312.76 degrees celsius.
The relation between temperature and pressure is given by the Gay Lusaac’s Law.
According to this law at constant volume, pressure is directly proportional to the temperature.
Mathematically it is as follows,
Pressure (P) ∝ Temperature(T)
P = K T
P/T = K(constant)
Thus the ratio of P/T will remain the same if volume remains constant.
So, P1/T1 = P2/T2
Here P1= initial pressure of the canister = 97.2 kPa = 0.95 atm
P2 = Final pressure of the canister = 1.88 atm
T1 = Initial temperature = 23 c = 296 K
T2 = Final temperature = ?
Putting these values
0.95/296 = 1.88/T2
T2 = 585.76 K or 312.6°C.
Thus, the final temperature of the canister is 312.76 degrees celsius.
To know more about "gas laws", refer to the link given below:
https://brainly.com/question/12669509?referrer=searchResults
#SPJ1
Calculate the number of O atoms in 0.994 g of CaSO4 · 2H2O.
A calcium sulfate crystal weighing 0.150 grams contains 0.00523 moles of oxygen.
White crystalline calcium sulfate, or CaSO4, is a material. Calcium sulphate is hydrate in the mineral or natural substance known as gypsum. As a food additive, calcium sulfate serves as a thickener, anti-caking agent, dough conditioner, dough strengthener, flour treatment agent, and yeast food. It is a thin, odorless powder that is white or white yellow.
Crystallized calcium sulfate mass = m = 0.150 g
Crystallized calcium sulfate's molecular mass is M = 172 g/mol.
Magnesium nitrate moles are equal to n=0.150/172 g/mol = 0.000872 mol.
6 moles of oxygen atoms make up 1 mole of the calcium sulfate crystal. The calcium sulfate crystal will then have 0.004446 moles.
A calcium sulfate crystal weighing 0.150 grams contains 0.00523 moles of oxygen.
Learn more about calcium sulphate here-
https://brainly.com/question/24202758
#SPJ9
Question 3
A piece of metal with a mass of 15.45 g is added to 21.27 mL of water in a
graduated cylinder. The water level rises to 24.78 mL. The density of the metal
is
g/mL.
Hint: You need to apply the significant figure rule for subtraction first; then apply
the significant figure rule for division. Do not round until the end!
Enter your answer as number without a unit.
The density of the object is 4.4 g/mL.
What is density?The term density refers the ratio of the mass of the mass to the volume of a body. The density of a body is a constant as it does not change irrespective of the mass or the volume of the object in at any given time. We have now been told that the former volume of the water was 21.27 mL. The addition of the object increased the volume of the object to about 24.78 mL.
Let us recall that is common to obtain the volume of a solid by the displacement method. The volume of the substance before and after the addition of the solid is recorded. The volume of the solid is taken to be the volume of the liquid that is displaced since the solid must displace its own volume of liquid.
Hence we have;
Mass = 15.45 g
Volume = 24.78 mL - 21.27 mL = 3.51 mL
Density = 15.45 g/3.51 mL
= 4.4 g/mL
Learn more about density:https://brainly.com/question/15164682
#SPJ1
what is the smallest alkyne
Answer:
Cyclooctyne (C8H12) is the smallest cycloalkyne capable of being isolated and stored as a stable compound
Explanation:
hope this helps
Express each of the following numbers in exponential notation:SHOW YOUR WORK
1) 10,000
2) 0.0001
3) 10,000,000,000
4)0.000 000 000 000 001
5)400,000
Answer:
1 a
2 b
3 c
4 d
5 e
Explanation:
i know is corret
Percocet contains oxycodone at varying strengths. Every strength also contains 325
mg of oxycodone per tablet. If the dose is not to exceed 3.9 g of oxycodone
daily, what is the maximum number of Percocet tablets a patient can take daily?
12 tablets maximum number of Percocet tablets a patient can take daily
Percocet is a prescription medicine used to treat the symptoms of acute pain and moderate-to-severe pain percocet may be used alone or with other medications percocet belongs to a class of drugs called Analgesics, Opioid Combos every strength also contains 325 this is the weakest dose of Percocet and is what most doctors will start with to help avoid side effects like respiratory depression this dosage is also used to gradually reduce Percocet dosage after dependence has developed, and to limit withdrawal symptoms percocet is a pain reliever for moderate to severe symptom over dose of percocet show side effect on body thats why 12 tablets maximum number of Percocet tablets a patient can take daily.
Know more about Percocet
https://brainly.com/question/28649445
#SPJ1
Forensics:
roshni, a forensic scientist, has ruled out several different drugs when testing a substance found in a car. She suspects that the substance is cocsine, what should roshni do next?
1-Perform a confirmatory test
2-Put the substance in a bag, label it, and send it to a DEA office
3-Confer with a colleague about her suspicions.
4-Collect a blood sample and see if it also contains the same substance
Since she suspects that the substance is cocsine, the thing that she should do next is option 1-Perform a confirmatory test.
How the Evidence Is Collected?The way that Drug evidence is collected is that from any crime scene, evidence is obtained, photographed, packaged, documented as well as been sent for analysis and then the forensic scientist will carry out the Analysis.
Since the evidence has been sent to Roshni, all she has to do is to carry out the confirmatory test to see if the drug is what she suspected.
Therefore, Since she suspects that the substance is cocsine, the thing that she should do next is option 1-Perform a confirmatory test.
Learn more about forensic scientist from
https://brainly.com/question/27111095
#SPJ1
which stament best explain why the dog is able to see the object more the rabbit can
Answer:
The position of their eyes
Explanation:
See, the dog is able to see the object more than the rabbit can is because of the position of their eyes.
The dogs eyes are positioned in the front like our eyes making the dog have a stereoscopic vision (180 degree field of view)
With rabbits though, they can't really see what's in front of them because their eyes are on the side hence the dog can see the object more than the rabbit can.
03 Question (1 point)
A
pot of water on a stove is heated to a rapid boil. What is the the gas inside the bubbles that form in the boiling water?
1st attempt
Choose one or more:
air
H2(g)
□ O2(g)
OH2O(g)
See par
lid See Periodic Table
The gas inside the bubbles that form in the boiling water is H₂O(g).
The gas inside the bubbles that form in the boiling water is mostly water vapor. The bubbles in the water vapor start to form on nucleation sites. The water vapor bubbles start to form larger as the temperature increases because more liquid is being converted to gaseous form. Vapor-filled bubbles shrink and disappear completely.
Therefore, when water is boiling the physical state of water, liquid changes to another state of water which is gaseous.
Hence, the bubble that we see in boiling water is the gaseous form H₂O(g) of water.
The boiling water is the vaporous form H₂O(g) of boiling water.
To learn more about gases, visit: https://brainly.com/question/1369730
#SPJ9
when liquid water loses energy, a change in state or chemical identity occurs. This is an example of a chemical or physical change?
Answer:
Physical change
Explanation:
Because there may be or may not be change in state,shape size.When water is heated it come to a state of vapour
Mg in chlorophyll, C55H72MgN4O5 (the green pigment in plant cells)
Express your answer using five significant figures. Determine the percent, by mass, for Mg
The percent by mass of Magnesium (Mg) in chlorophyll is 2.69%.
How to calculate percent by mass?The percent by mass of an element in a compound can be calculated by dividing the atomic mass of the element by the molar mass of the compound multiplied by 100.
The molar mass of chlorophyll is as follows: 12(55) + 1(72) + 24 + 14(4) + 16(5) = 660 + 72 + 24 + 56 + 80 = 892g/mol
Percent mass of Mg = 24/892 × 100
Percent mass of Mg = 0.0269 × 100
Percent mass of Mg = 2.69%
Therefore, the percent by mass of Magnesium (Mg) in chlorophyll is 2.69%.
Learn more about percent by mass at: https://brainly.com/question/5394922
#SPJ1
a. What are the four states, or phases, of matter? Describe the shape and volume properties of each phase. Can they change, or are they fixed? i. _______________________ Shape: Volume: ii. _______________________ Shape: Volume: iii. _______________________ Shape: Volume: iv. _______________________ Shape: Volume:
The four states or phases of matter are:
LiquidSolidGasPlasmaLiquid: This state or phase of matter has no definite shape. It takes the shape of the container.
Liquid has a fixed volume: The particles of liquid are held close togetherSolid: Solid has a definite volume and shape
This means that matter in the solid state takes the shape of whatever container it is.If it takes the shape of its container, it then means that it also has a fixed volume.Gas: Neither a definite shape nor volume.
This means that gas as a state of matter has no definite shape. It has also no definite volumePlasma: No fixed shape or volume.
They are usually denser than solid or liquids.It has no fixed shape and volume What is matter?Matter can simply be defined as anything that has mass and occupies space. There are four major States or phases of matter. These are: Solid, liquid, gas and plasma.
So therefore, the four states or phases of matter are:
LiquidSolidGasPlasmaLearn more about matter:
https://brainly.com/question/3998772
#SPJ1
Draw the structures of the products of the neutralization reaction between hydroxide ion and acetic acid
Answer:
CH3COOH + OH- ----> CH3COO- + H2O
How many moles of N are in 0.207 g of N₂O?
Number of moles of N in 0.207 g of N₂O= 0.0094
We are starting with 0.207g of N₂O in this instance. Let's use the molar mass, which is 44.013 g/mol, to convert that to moles.
(1 mol N₂O / 44.013 g N₂O) x 0.207 g
⇒ 0.00470 mol N₂O.
Having reached moles of nitrogen monoxide, we must now determine how many moles of nitrogen there are. We can see that there is a subscript of 2, indicating that there are two moles of nitrogen for every mol of nitrogen dioxide. You might think of it in terms of food; there are two pieces of bread for every sandwich.
In order to obtain moles of N, let's multiply the amount of moles of N₂O by 2.
(2 mol N / 1 mol N₂O )x 0.00470 mol N₂O = 0.0094 mol N.
Hence, Number of moles of N in 0.207 g of N₂O will be 0.0094.
To learn more about Number of Moles refer- https://brainly.com/question/14464650
#SPJ9