Pls Help pls pls pls answer all the questions like this

1. your answer
2. your answer
3. your answer

FAST PLS I NEED AN 100%!!!!

Answer:

atom is smallest praticle of an element

Answer:

atom

Explanation:

SO₂ represent molecular and empirical formula, B₄H₁₀ represent only molecular formula, CO represent molecular formula and empirical formula, C₄H₄O₂ represent only molecular formula.

The chemical formula that gives total number of atoms of each element in one molecule of a compound is called Molecular Formula.

Empirical formula is the formula of compound in which it exist in simplest whole number ratio of atoms present in a compound.

Thus from the above conclusion we can say that SO₂ represent molecular and empirical formula, B₄H₁₀ represent only molecular formula, CO represent molecular formula and empirical formula, C₄H₄O₂ represent only molecular formula.

Learn more about the Molecular Formula here: brainly.com/question/15960587

#SPJ4

Disclaimer: The given question is incomplete on the portal. Here is the complete question.

Question: Consider the following four formulas: SO₂, B₄H₁₀, CO, C₄H₄O₂. Which of these formulas could be only an empirical formula, only a molecular formula, either a molecular or an empirical formula?

Answer:

Explanation:

by checkng the chemical formula and oxidationn number

The atomic mass of Hafnium is 357.1amu and atomic mass is the total mass of the subatomic particles in an atom and is measured in atomic mass units

Here given data is if in a sample, 10 have mass 176 amu, 38 have mass  177 amu, 54 have mass 178 amu, 28 have mass 179 amu, and 70 have mass 180 amu then

The atomic mass is a weighted average of all of the isotopes of that element, in which the mass of each isotope is multiplied by the abundance of that particular isotope

We have to find average atomic mass = ?

Average atomic mass = atomic weight of Hafnium/100

Now we can substitute the known values

Then, Average atomic mass = (176×10)+(177×38)+(178×54)+(179×28)+(180×70)/100

Average atomic mass = 357.1amu

357.1amu is the atomic mass of Hafnium

Know more about  atomic mass

https://brainly.com/question/6986147

#SPJ1

Atomic mass calculated as the sum of protons and neutrons, it is measured in amu. This is because protons and neutrons each have a mass of 1 amu.

The sum of the masses of the protons, neutrons, and electrons in an atom or collection of atoms is known as the atomic mass. Since electrons are far lighter than protons or neutrons, the computation does not take their mass into account. A single atom's atomic mass is only its total mass, and it is usually given in atomic mass units, or amu.

Atomic mass = total number of protons present in the nucleus + total number of neutrons present in the nucleus of an atom

For elements having isotopes relative atomic masses are taken in consideration. The relative atomic mass is an average of the atomic masses of all the different isotopes.

Example- The atomic mass of carbon atom -  with six neutrons and 6 protons the atomic mass is 12 amu.

To know more about atomic mass visit the link:

https://brainly.com/question/17067547?referrer=searchResults

#SPJ9

The skill of Dimensional Analysis in the science deals with the conversion of units and numbers.

The physical quantities are only seven in basic. All the other quantities that we see are just derived quantities in one or the other.

While checking the correctness of a formula or while analyzing the reliability of an equation, we use dimensional analysis and convert the units into the dimension form.

Every fundamental quantity is given a Special notation like M for kg and L for meter.

Converting a bigger quantity into a smaller one is also a part of the dimensional analysis. As we know, we can measure the distance between our houses in meter but thing are different when it comes to astronomical distances.

To know more about Dimensional analysis, visit,

https://brainly.com/question/17224555

#SPJ9

The Newton's third law deals with action and reaction.

According to Isaac Newton, there are three laws that govern the motion of an object and this is the field that we call dynamics. They deal with the interaction of the force that acts on a body and causes it to move. Three laws of Isaac Newton deals with the various aspects of the motion of an object.

The Newton third law of motion states that action and reaction are equal and opposite. This implies that, when a force is exerted on a body, the body exerts the same magnitude of force back on the person that exerted the force but in this case, the force is acting in opposite direction.

A typical example of this law is when a gun is fired. It observed that as the bullet leaves the gun as the force acts on it, the gun has to recoil. The recoil of the gun owes to the reaction force.

Learn more about Newton’s third law:https://brainly.com/question/974124

#SPJ1

Cations have more protons than electrons, Anions result when atoms gain an electron.

The electron, a subatomic particle, has a negative one elementary charge electric charge. The electron, a member of the first generation of the lepton particle family, is usually regarded as an elementary particle because it has no known components or substructure.

A few straightforward rules can be used to calculate the quantity of protons, neutrons, and electrons present in an atom. The atomic number and the number of protons in the atom's nucleus are equal (Z). A neutral atom has the same number of protons and electrons as protons.

Around the nucleus, electrons are positioned in several shells. Only a fixed amount of electrons can fit in each subsequent shell. Filling begins with the innermost shell.

To know more about nucleus visit :

https://brainly.com/question/23366064

#SPJ4

Consequently, the protein molecule has a length of 315 x 10^-9 metres.

learn more about hydrogen atom here

https://brainly.com/question/13796082

#SPJ4

When a chemical element's density and volume are known, the mass of the chemical element can be calculated by multiplying the density and volume. When determining the mass of a chemical element, the link between the quantity of moles and molar mass is occasionally used.

                                = 73.6 * 1.25/28 = 3.29 moles

Therefore, the mass of sodium azide is 142.35g.

Learn more about molar mass:

https://brainly.com/question/22503632

#SPJ4

The correct scientific notation of the following numbers is as follows:

Five guidelines for scientific notation:

Learn more about scientific notation here:

brainly.com/question/28475792

#SPJ9

Sublimation is the conversion between the solid and the gaseous phases of matter, with no intermediate liquid stage.

Sublimation is that the method by that a substance changes from its solid to vaporous state while not transitioning to its liquid state. At a temperature and pressure below the substance's triple purpose, this method, Associate in Nursing heat-absorbing natural process, takes place.

Solids will directly elegant into the air if they need enough pressure level at a given temperature. Sublimation happens once a solid reaches its triple point below extreme pressure. The triple point is that the temperature and pressure at that a substance will at the same time exist all told 3 of its famed states of matter. A substance's triple point is one in every of its distinctive points.

The opposite of this method, during which a gas is remodeled straight into a solid state, is Desublimation or deposition.

The best illustration of sublimation is solid, that is Carbon dioxide that has been frozen. solid directly transforms from its solid state to a vaporous state, that is visible as fog, once it's exposed to air. The vaporous state of frozen dioxide is additional stable than the solid state.

To learn more about sublimation visit the link:

https://brainly.com/question/9967928?referrer=searchResults

#SPJ9

The valproic acid contains 0.0645 milligrams

1000 microgram = 1 milligram

From the question given, the following data were obtained:

We can convert 64.5 micrograms to milligrams as illustrated below:

1000 microgram = 1 milligram

Therefore,

64.5 micrograms = (64.5 micrograms × 1 milligram) / 1000 microgram

64.5 micrograms = 0.0645 milligrams

Thus, the valproic acid contains 0.0645 milligrams

Learn more about conversion:

https://brainly.com/question/1444594

#SPJ1

The temperature of the mesosphere is much higher than the asthenosphere overall, but yet is is still a ductile solid. The thing that keeps it from melting is high pressure.

The mesosphere plays a crucial role in protecting the earth. Most meteors and asteroids are destroyed by the mesosphere before they can impact the earth's surface.

An area of the Earth's atmosphere is called the mesosphere. Directly above the stratosphere and beneath the thermosphere lies the mesosphere. It covers a distance of 31 to 53 miles, or 50 to 85 kilometers, above our planet. The mesosphere's temperature falls with height.

It should be noted that this high pressure that keeps it solid in form and does not let it melt down.

Learn more about temperature on:

https://brainly.com/question/24746268

#SPJ1

The temperature of the mesosphere is much higher than the asthenosphere overall, but yet is is still a ductile solid. what keeps it from melting?

Cool temperature

Distance from the sun.

High pressure

Low pressure

By the principle of atom economy the second process is more efficient.

We know that the atom is the smallest particle of a substance that could take part in a chemical reaction. We are also aware that all compounds are composed of atoms and that a chemical reaction has to do with the rearrangement of atoms in such a way that be products could be formed.

In this case, we know that an organic product may be obtained in a sequence of reactions and the atom economy is very important in the nature of the process that is being carried out. Let us now take  good look at the two processes that could be shown.

In the first process, we can see that there are a lot of products that could just be classified as side products and does not have a real relevance to the final products. In the second process, we have only one waste product and that is water.

As such, by the principle of atom economy the second process is more efficient.

Learn more about atom economy:https://brainly.com/question/14542629

#SPJ1

The concentration of hydroxide ions is

4.89 x 10^-10

Given:

[H3O+] = 2 x 10^-5 m

To Find:

pOH of solution

Solution:

pH = -log[H3O+]

pH = -log[2 x 10^-5]

pH = 4.69

pH + pOH = 14

pOH = 14 - 4.69 = 9.31

Now , we can calculate the concentration of hydroxide ions of the solution very easily as shown below :

[OH-] = 10^-pOH

[OH-] = 10^-9.31

[OH-] = 4.89 x 10^-10

Thus , the concentration of hydroxide ions is

Thus , the concentration of hydroxide ions is 4.89 x 10^-10

Learn more about Concentration here:

https://brainly.com/question/17206790

#SPJ4

Volume of NaOH solution needed to neutralize C₆H₈O₇ is 56.825 ml

In titration reaction , at equivalence point

Moles of Acid = Moles of Base

If [tex]M_1[/tex] is mole of acid and [tex]V_1[/tex] is volume of acid

  [tex]M_2[/tex] is moles of base and [tex]V_2[/tex] is volume of base

Then [tex]M_1 V_1 = M_2 V_2[/tex]

Here in this question

[tex]M_1 = 0.200 M\\ M_2 = 0.0333 MV_1 = unknown\\V_2 = 345[/tex]

Therefore,

[tex].200 * V_1 = 0.033 * 345 ml[/tex]

[tex]V_1[/tex] =  [tex]0.033 *345 / .200[/tex]

[tex]V_1 = 56.825 ml[/tex]

To know more about titration

https://brainly.com/question/2728613

#SPJ4

The quantity of 145 ml glasses of wine, consumed over three hours, will produce a bac of 0.10% in this 68 kg person is 2.3 glasses of wine.

Quantity is the measurement of something that is present. It can be liquid, gas, or solid.

In three hours, to produce a BAC of 0,10%  for a 68kg person (5,4L blood) you need to consume:

10 g of ethyl alcohol / 100 ml of blood x 5400 ml of blood + 10.0 g/h = 30.54g of ethyl alcohol

Assuming a 11,6% (v/v) of wine Where density of ethyl alcohol is 0,789 g/mL

30.54g of ethyl alcohol x 1ml ethanol / 0.789 x 100 ml wine/ 1.6 ml ethanol = 333.7 mL wine

333.7 mL wine / 145 ml = 2.3 glass of wine

Thus, the person needs to consume 2.3 glasses of wine.

To learn more about volume, refer to the link:

https://brainly.com/question/13184487

#SPJ4

Answer:

62,000,000 written in scientific notation is 6.2 × 107.

Explanation:

The percent by mass of mercury in mercuric oxide is

93 %.

The formula of mercuric oxide is HgO. When mercury combines with oxygen, then mercuric oxide is formed.

The molecular mass of mercury oxide is 216 g/mol. Its melting point is 500°C.

The balance equation for the reaction of decomposition of mercury oxide is,

[tex]2HgO (s)→ 2Hg (l) + O _{2}(g)[/tex]

Mass of mercury oxide = 28.4 g

Mass of the oxygen = 2 g

The percent by mass of mercury in mercury oxide is,

[tex]Mass ℅= \frac{Mass \: of \: Mercury }{Mass \: of \: Mercury \: oxide} \times 100[/tex]

[tex] = \frac{28.4 - 2}{28.4} \times 100[/tex]

= 93 %

Therefore, the percent by mass of mercury in mercury oxide is 93 %.

To know more about mercuric oxide, refer to the below link:

https://brainly.com/question/14415378

#SPJ4

739 ml volume of water would remain

volume of solution = 1Litre = 1000 ml

density of solution = 1.189 g/ml

mass of solution = volume of solution × density of solution

= 1000 × 1.189 = 1189 g

conc of  HCL is 38% by weight.

so, mass of HCL in 1189g of solution = 38% of 1189 = 451.82g

mass of H2O in solution = mass of solution - mass of HCl

= 1189g - 451.82g

= 737.18g

volume of  H2O = mass of  H2O/density of  H2O

= 737.18/0.9982 ml

=739 ml volume of water would remain.

learn more about hydrochloric acid here

https://brainly.com/question/27576431

#SPJ4

the question you are looking for is

Concentrated hydrochloric acid is 38% HCl by mass, and it has a density of 1.189 g/ml at 20 celsius. The density of water at 20 celsius is 0.9982 g/ml. If all the HCl were somehow removed from 1.000 liters of this solution at 20 celsius, what volume of water would remain?

Answer: Diffusion

Explanation:

diffusion is when particles move from a region of higher concentration to lower concentration as a result of their random movement. They are in constant motion and the gas particles spread to fill the volume in the room.

For the rate of reaction a negative sign is used is when expressing the change in concentration of a reactant over time, such as −δ[a]/δt for the reaction A→B. Because the concentration of the reactant goes on decreasing with the time to form product.

The rate of reaction is defined as the rate of change of concentration of product and the concentration of reactant.

Let us considered a chemical reaction:

A → B

It can also be said that, rate of reaction is directly proportional to the concentration of reactant.

R = δ[B]/δt = -δ[A]/δt

Rate of the product is always positive because the concentration of the product always increases with time.

Thus, we concluded that due to continue decrease in the concentration of the reactant goes with time to form product, the rate of reaction expressed with a negative sign.

learn more about rate of reaction:

https://brainly.com/question/8592296

#SPJ4

It has been observed that most US adult intake high levels of sodium and low level of potassium.

The American Health Association (AHA) published in its reports that US adults consume food containing more sodium and avoid food containing potassium. It causes various side effects and health-related problems. It was estimated that 99.4% of the total United States adults intake high levels of sodium on daily a basis. AHA guidelines recommend (<1500 mg) of sodium to be consumed. They consume even more than the Institute of Medicine's tolerable upper Intake level which is 2300 mg.

In the US, adults aged over 51 years or people suffering from diabetes, chronic kidney disease, or hypertension are recommended by the Dietary Guidelines to reduce sodium intake to 1500 mg per day. The overall result suggested that 98.8% consumed more than 1500 mg per day, and 60.4% consumed more than 3000 mg per day. These calculations of intake are more than double the recommendation guidelines. Only less than 2% of US adults and around 5% of US men consumed less than 4700 mg per day of potassium.

Therefore, it is concluded that the maximum US adult intake is high levels of sodium and low level of potassium.

Read more about Potassium & Sodium:

https://brainly.com/question/12544322

#SPJ4

The calculated answer is 40x2/6.023x10²³

Calcium is a mineral that is most frequently linked to strong bones and teeth, but it also plays a critical role in blood clotting, assisting with muscular contraction, and regulating regular heartbeats and nerve activity. Calcium has a 40g molar mass (mass of 1 mole). I'm assuming that all you're looking for is the mass of two calcium atoms, which is incredibly little:

A mole of calcium weighs 40g and contains 6.023 x 10²³ atoms.

There would be 1.328x10-22 g of calcium if 2 calcium atoms have a mass of 40x2/6.023x10²³.

Learn more about calcium here-

https://brainly.com/question/4023397

#SPJ9

Running requires the body to transform potential energy into kinetic energy. A system's internal energy is known as its potential energy. When a system moves horizontally using kinetic energy, potential energy is consumed.

Potential energy is conserved as chemical energy in the human body. The food that a person eats during the day provides the chemical energy. The body requires a specific number of calories, or the energy from food, to carry out specific tasks. The runner will run out of potential energy and weary if they have not consumed enough calories during the day. This is due to the body's poor capacity for storing energy. Although energy cannot be created or destroyed, it may move. The majority of the person's stored energy is released as thermal energy while they run.

The impact of the runner's foot on the ground causes sound waves to be emitted, which releases energy from the runner's body. Every stride a runner takes releases energy from their body, thus it's critical for them to eat adequate chemical energy in the form of calories before their run. The body of the runner need a significant number of calories as a reserve so that they will have more energy to burn as their stored energy is released during the run.

The body is not particularly effective at preserving this energy when it uses the calories it has already consumed. The heat (thermal energy) that the body emits when it transforms its stored (potential) chemical energy into kinetic energy causes around 75% of the chemical energy that the runner has ingested to be wasted as the leg muscles contract to propel the runner forward. The flow chart is attached below.

To learn more about energy transformation or conversion, please refer:

https://brainly.com/question/961052

#SPJ9

Answer:

See explanation

Explanation:

Turning on a flashlight: The chemical energy in the flashlight batteries is converted to electrical energy when the flashlight is turned on. The electrical energy is then converted to light (electromagnetic / radiant energy) and some thermal energy (little warmth from light in flashlight) by the light bulb. Chemical to Electrical to Light and Thermal

A Toaster: When electrical energy passes through the heating element in a toaster, it converts this electrical energy to thermal energy which helps to prepare toast. Electrical to thermal

Playing a violin: When the violin and the strings vibrate due to mechanical energy, it produces sound waves and sound energy. Mechanical to Sound

Nuclear power plant: Nuclear power plants use heat from fission to make steam that turns the turbine, creating mechanical energy. Mechanical energy turns the electric generator. Thermal to Mechanical