The functional group of the amino acid histidine has a pka of approximately 6. 0. What would you expect would be true of a histidine residue in an enzyme in a solution with ph 4. 0?.

A formula that lists the relative amounts of the constituent components in a compound without specifying the number or configuration of atoms. The empirical formula is , thus option (d) is correct.

The formula that shows the ratio of elements present in the compound, but not the actual numbers of atoms found in the molecule. Empirical formula seems to be a compound chemical formula that only specifies the ratio of elements it contains, not the precise number as well as arrangements of atoms. This corresponds to compound elements with the smallest whole number ratio.

Empirical, molecular as well as structural formula are still the three basic category the easiest whole number ratio of a compound is shown by empirical formula. The number including each variety of atom in a molecule is shown by molecular formula, and the bonds between atoms in a molecule is shown by structural formula.

Thus, option (d) empirical formula  is  C₄H₂O₂ correct.

To learn more about empirical formula ,refer to below link:

https://brainly.com/question/21743699

#SPJ1

Option a. The maximum oxygen uptake is known as the VO2 max.

This means that the maximum amount of oxygen that one's body can take during the exercise is VO2 max.

An exercise is an aerobic activity that requires oxygen more than normal activities due to a lot of physical effort.

When people exercise, their breathe heavily because the body needs more oxygen.

During this process, the ATP empowers the cells to release CO2 that produces during the respiratory process when we exhale.

So the greater the VO2 max is, more will be the benefits. As the body can consume more oxygen, the maximum amount of ATP energy is generated.

See a similar question about oxygen here:

https://brainly.com/question/28495755

#SPJ4

Answer:

Whats the question? I can try and help you

Explanation:

The final temperature of the gas is determined as -112.6 ˚C.

The final temperature of the gas is calculated by applying general gas equation as shown below;

V1P1/T1 = V2P2/T2

where;

Substitute the given parameters and solve for the final temperature of the gas.

T2 = (V2P2T1)/(V1P1)

T2 = (2.4 x 3.3 x 323)/(2.9 x 5.5)

T2 = 160.38 K

In degrees Celsius = 160.38 - 273 = -112.6 ˚C

Thus, the final temperature of the gas is determined as -112.6 ˚C.

Learn more about general gas equation here: https://brainly.com/question/4147359

#SPJ1

An Atom is the fundamental particle of matter, and any further breakdown of this would result in loss of the properties that are unique to its element.

The smallest piece of matter with all of an element's chemical properties is an atom. Neutrons, protons, and electrons make up an atom's three constituent parts. The atom's nucleus is a compact, positively charged core made up of protons and neutrons, and is surrounded by an electron cloud, which is made up of negatively charged electrons.

To learn more about atoms visit:

https://brainly.com/question/1566330

#SPJ4

The molar mass of camphor is 152 g/mol.

We have given that,

P = 12 torr or 0.01579 atm

1 atm = 760 torr

Density = 0.0829 g/l

R = 0.0821 L.atm/mol.K

And temperature is

T = 273° K + 80° K

  = 353° K

As we all know,

PV = nRT

so, PV = mass × R × T / molar mass

also, P = mass × R × T / volume × molar mass

here, mass/ volume = density (d)

P = dRT / molar mass

Now putting the values and simplify,

0.01579 = 0.0829 × 0.0821 × 353 / molar mass

molar mass = 152.156 g/mol.

thus, the molar mass of camphor is 152 g/mol.

The molar mass of a chemical substance is determined in chemistry by dividing the amount of a substance with that compound by the quantity of that compound, which is the number of moles in exactly that sample, which is measured or calculated in moles.

In contrast to molecular properties, a substance's molar mass is a bulk property. The compound is present in many different forms, each with a different mass as a result of the isotopes. The molar mass is the average of these masses.

The molar mass is often calculated using the standard atomic weights and is therefore an average for Earth and a function of the relative abundance of the constituent atoms' isotopes.

Learn more about molar mass

https://brainly.com/question/837939

#SPJ4

The average atomic mass of isotopes of magnesium is 23.4 amu

To get the average atomic mass we have to multiply mass of each isotopes to the % of abundance and then add and divided by 100.

Isotope of magnesium given as,

1) 22.5 amu has an abundance of 78%

= (22.5 × 78 )  = 1755.0

2) 25.3 amu has an abundance of 13 %

= ( 25.3 × 13 ) = 328.9

2) 24.6 amu has an abundance of 9 %

= ( 24.6 ×9) = 221.4

The average atomic mass of magnesium will be

= (1755.0 + 328.9 + 221.4 ) /100

= 23.4 amu

Thus,The average atomic mass of isotopes of magnesium is 23.4 amu

To learn more about isotopes here

https://brainly.com/question/13292428

#SPJ1

The model as shown in useful in the explanation of reflection.

The term model refers to that which represents reality. A model could be used for the purpose of explanation or for the purpose of prediction. It is used to show how there are connections in real life.

Now let us examine the model as shown. We can see that this is a model of reflection. The image of the ball can be seen on the mirror because light that falls on the ball is reflected towards the mirror.

This model is very useful in the description of the the phenomenon of reflection in the real life.

Learn more about models:https://brainly.com/question/14281845

#SPJ1

The number of kilograms of dry air in the room that measures 15.0 ft by 18.0 ft by 8.00 ft is 71.44 Kg

We'll begin by obtaining the volume of the room. This can be obtained as follow:

Volume = dimension

Volume = 15.0 ft × 18.0 ft × 8.00 ft

Volume = 2160 ft³

Multiply by 28.3168 to express in liter

Volume = 2160 × 28.3168

Volume = 61164.288 L

The mass of the dry air can be obtained as follow:

Density = mass / volume

Cross multiply

Mass = Density × Volume

Mass of dry air = 1.168 × 61164.288

Mass of dry air = 71439.89 g

Divide by 1000 to express in kilograms

Mass of dry air = 71439.89 / 1000

Mass of dry air = 71.44 Kg

Learn more about density:

https://brainly.com/question/952755

#SPJ1

Concentrated hcl has a specific gravity of 1.185 and is 36.5% w/w in hcl so 88 ml concentrated solution and in that add water

Here given data is concentrated hcl has a specific gravity of 1.185 and is 36.5% w/w in hcl and 88 ml concentrated solution  1.0 l of 0.050 m hcl would be prepared from the concentrated reagent because to make total 1 litre so we have to make total volume in that flask so to make total volume we have to take 88 ml of concentrated solution and add water to make a total of 1 litre to make 1.0 litre hcl add 88ml hcl concentrated solution and add water to make volume.

So, 1.0 l of 0.050 m hcl would be prepared from the concentrated reagent we have add water on it

Know more about concentrated hcl

https://brainly.com/question/28607150

#SPJ4

Answer: USA is on the North plate American!

Explanation:

The concentration in weight percent when 6 g of sugar is mixed with 9 g of water is 40%.

There are several ways to denote the concentration of a solution like

The formula for calculating mass percent is as follows

Mass per cent = (Mass of solute/Mass of solute + Mass of solvent) x 100%

In the given situation sugar is the solute and water is the solvent.

Putting the given values in the above formula

Mass per cent = (6/6+9) x 100%= 6/15 x 100% = 40%

Hence, the concentration in weight percent when 6 g of sugar is mixed with 9 g of water is 40%.

To know more about "concentration of a solution", refer to the link given below:

https://brainly.com/question/26579666?referrer=searchResults

#SPJ4

According to the solubility chart below  the solubility of Argon gas is not dependent on temperature.

The maximum amount of a chemical that will dissolve in a given amount of solvent at a given temperature is referred to as its solubility.

The solubilities of various compounds vary greatly, and this property of a particular solute-solvent pair is evident.

The addition of sugar cubes to a cup of tea or coffee serves as an example of a solution. A property that facilitates the dissolution of sugar molecules is solubility. Solubility is the property of a substance (solute) to dissolve in a certain solvent.

Solutes are divided into three categories: highly soluble, sparingly soluble, and insoluble based on the concentration at which they dissolve in a solvent.

To learn more about solubility from the given link:

brainly.com/question/28170449

#SPJ1

B. The final speed of the ball when it hits the ground is determined as 24.2 m/s.

The final speed of the ball can be determined by applying the principle of conservation of energy as follows;

K.E = P.E

¹/₂mv² = mgh

v² = 2gh

v = √2gh

where;

Substitute the given parameters and solve for the maximum speed of the ball.

v = √(2 x 9.8 x 30)

v = 24.2 m/s

Thus, the final speed of the ball when it hits the ground is determined as 24.2 m/s.

Learn more about final speed here: https://brainly.com/question/6504879

#SPJ1

Along the diverging boundary, a deep valley known as a rift valley develops.

A valley is a long, low terrain that frequently stretches between hills or mountains. It usually has a river or stream that flows from one end to the other.

The majority of valleys are created by rivers or streams eroding the land's surface over a very lengthy period of time.

A valley is a low area of ground between hills, particularly one through which a river flows.

In "triple junctions," a type of divergent boundary where three tectonic plates collide at angles of around 120°, several rift valleys are found.

Thus, along the diverging boundary, a deep valley known as a rift valley develops

To learn more about valley, refer to the link below: https://brainly.com/question/28208543

# SPJ1

The larger crystal sodium chloride could be represented perfectly by the use of the model of the crystal.

A crystal is an arrangement of the ions in are found in an ionic substance. We know that ions are contained in crystals and that these ions are arranged in a definite pattern such that we have a crystal structure that is definite. The ions are arranged in a regular repeating pattern and models of the crystal could be shown in;

A ball and stick model

A space filling model.

Thus, a larger crystal could be replicated by a model. Note that the model serves the purpose of both explanation and predication of the properties of the sodium chloride crystal.

In the model, the sodium ions are arranged in alternate position with the chloride ions. The continuous network of the alternate ions in the system is the determinant of the properties of the system.

In a model, it is common to represent each of the ions in the system by the use of dots. The dots often have differing colors.

Learn more about crystal models:https://brainly.com/question/25661580

#SPJ1

The intermolecular attraction force that acts between two adjacent parts of a substance, especially a solid or liquid, is known as cohesion. A piece of substance is held together by this force.

Surface tension is the propensity for liquid surfaces that are at rest to condense into the smallest surface area. Razor blades and insects, which have a density greater than that of water, can float on the surface of the water without even becoming partially buried because to surface tension.

How are cohesion and surface tension related?

The phenomenon known as surface tension is caused by the cohesive forces between liquid molecules.

The ability of a water surface to withstand breaking is referred to as surface tension when discussing a compound like water.

In a liquid, molecules will be drawn to one another. Cohesion is the molecular attraction of similar molecules, whereas adhesion is the molecular attraction of dissimilar molecules.

Cohesion is most closely connected to surface tension. For instance, water molecules are drawn to one another, which causes the surface tension of a pool of water.

To know more about cohesion and surface, click on the link below:

https://brainly.com/question/13560861

#SPJ9

Answer:

Iron(III) sulfate (AKA Fe2(SO4)3)

Explanation:

the parameter plotted on the x-axis of a mass spectrum, in the form 'mass to charge ratio'

Mass spectroscopy is the analytical tool useful for measuring the mass to charge ratio means m/z of one or more molecule present in a sample it is a technique in which the separates ionized particles such as atom, molecules  by using differences in the ratio of their respective mass and also can be used to determine the molecular weight of the particles  and in the mass spectrum the x axis are shown mass to charge ratio and y axis are shown abundance or relative intensity

Know more about mass spectrum

https://brainly.com/question/2988581

#SPJ1

The list contains several belongings of ethylene( a growing agent for bananas). The properties shown by the given substance is :

Physical property is a kind of property that's measureable. It explains the state of the given substance or patches. Generally shows odor, color, texture, viscosity etc.

1. Tintless

2. Odorless

3. Gas at room temperature

4. Mixes with acetone

5. 1 L has a mass of1.260 under standard conditions

Hence the physical properties are tintless , odorless, gas at room temperature, one liter has a mass of1.260 under standard conditions, mixes with acetone.

Chemical property : A chemical property is defines as the material's belongings that is seen or observed in between the chemical reactions.

1. ignitable

2. polymerizes to form polyethylene

The given question is incomplete the complete question would be :

The ensuing list contains several belongings of ethylene (a growing agent for bananas). which are physical belongings and which are chemical properties?

Tintless

Odorless

Ignitible

Gas at room temperature

1 l has a mass of 1.260 under standard conditions

Mixes with acetone

Polymerizes to form polythene

To know more about Physical Properties & Chemical properties here :

https://brainly.com/question/5186976?referrer=searchResults

#SPJ4

Answer:

the experimenter should include an observater and an analysis

Explanation:

Answer:

The part 1 of the experiment designed to test whether land or water heats faster is answered below for each and every questions.

1 ) The experiment will test whether land or water heats faster

2 ) The independent variable of this experiment is sand, water and heat lamps and the dependent variable is the rate of heat transfer.

3 ) The sand represents the land part of the hypothesis

4 ) The water represents the water body part of the hypothesis

5 ) The heat lamps represent the sun which provided heat

6 ) The thermometers will be used to measure the temperature

7 ) It could be set up such a way that the sand and water receives equal amount of heat from the lamps for an equal amount of time.

8 ) The temperature can be measured using the thermometer to see whether the land or water has gained more heat. Whichever has gained more heat, heats faster.

9 ) Within a 24-hour period, the three points, the temperature be taken are at 8 hours, 16 hours and 24 hours. Because the temperature should be taken at a steady rate of time.

10 ) An effective conclusion would include the facts that proves the hypothesis.

Therefore, the part 1 of the experiment designed to test whether land or water heats faster is answered above

To know more about land or water heats faster

Answer:

Aspirin

Explanation:

I'm doing the same unit in biology

When solid chromium(III) oxide reacts with liquid aluminium to give liquid chromium and liquid aluminium oxide at high temperature, the balanced chemical equation of the reaction including the states of matter can be written as :

                    Cr₂O₃(s) + 2Al(l)    →   2Cr(l) + Al₂O₃(l)

This reaction occurs at high temperature because the reactivity is increased under this condition.The liquid aluminium is oxidized to form liquid aluminum oxide and the solid chromium(III) oxide is reduced to form liquid chromium.

Chromium(III) oxide is amphoteric in nature and insoluble in water. If it is reacted with aluminium, it gets reduced to the chromium metal. It is a type of simple replacement reaction as Chromium metal is replaced by the aluminium. It is an example of displacement reaction.

Correct question is -

The following reaction takes place at high temperatures. solid chromium(III) oxide reacts with liquid aluminum to give liquid chromium and liquid aluminum oxide. Write the balanced chemical equation (includes the states of matter).

To learn more about chromium(III) oxide,

brainly.com/question/28274299

#SPJ4

Van der Waals forces. Van der Waals forces are very weak forces between two very close surfaces.

Forces of van der Waals. When two surfaces are very close to one another, van der Waals forces are very weak.

In gases, liquefied and solidified gases, and nearly all organic liquids and solids, neutral molecules are drawn to one another by van der Waals forces, which are relatively weak electric forces.

Van der Waals interactions are nonionic forces that have a comparatively low energy of 0.5 to 1 kcal/mol.

The covalent link from its less electronegative Neighbour atom tends to drive the electron cloud toward neutral molecules with electronegative atoms like oxygen and nitrogen.

To know more about van der Waals forces visit:

https://brainly.com/question/13201335

#SPJ4

The number of dilutions needed to be made before getting to 2.5 % as the final concentration would be 2.

We are given that, we have to do 50% serial dilution, which means that after every dilution the concentration reduces to half of its initial value.

On starting with 10% concentration, the concentration after one dilution would be 5%.

After diluting it two times, the final concentration would be half of 5% i.e 2.5%.

Thus, the number of dilutions needed to be made before getting to 2.5 % as the final concentration would be 2.

To know more about "concentration of a solution", refer to the following link:

https://brainly.com/question/28311107?referrer=searchResults

#SPJ4

D and E are correct statements

option D is correct. The atom's orbital configuration shows the number of valence electrons present and predicts the number and types of bonds the atom will form.

A three-dimensional representation of an electron's most likely position within an atom is called an orbital.

The number and type of bonds that an atom is expected to make are among the chemical features of an atom that can be predicted using the orbital configuration of neutral atoms.

it  Determines which atom will create the most bonds by using the orbital diagrams. Alkaline earth metal atoms combine with other elements to produce compounds.

So, thus we can say that The atom's orbital configuration shows the number of valence electrons present and predicts the number and types of bonds the atom will form.

To learn more about atomic orbital configuration, refer to the below link:

https://brainly.com/question/13159700

# SPJ1

The bond that exists between two oxygen atoms to make the O2 molecule is described as two covalent bonds and two lone pairs of electrons are present on each individual oxygen atom.

A double bond in chemistry is a covalent bond between two atoms that involves four bonding electrons, rather than two as in a single bond.

In the oxygen molecule, O2, the oxygen atoms that make up the molecule are bonded together by sharing two pairs of electrons. Each oxygen atom has 6 valence electrons, if they share two of their valence electrons with each other, they each have 8 valence electrons.

In this way, the so-called octet rule is fulfilled, where atoms gain, lose or share electrons with other atoms to have 8 valence electrons and thus acquire a noble gas configuration.

The atom is the smallest part of the composition of matter, it is indivisible and is composed of a nucleus that has protons and neutrons, and around the nucleus there are the electrons

Learn more about the atom at: brainly.com/question/17545314

#SPJ4

The density (mass per volume) of most liquids increases as the temperature is lowered.

When the temperature is lowered, most liquids become denser (mass per volume). Density decreases as temperature rises more. Density rises with a drop in temperature.

Most liquids expand in volume as the temperature rises, which causes the density of the liquids to decrease. Similar to this, as temperature drops, most liquids lose volume, increasing density.

The molecules of a liquid or gas move more quickly, collide, and spread apart when it is heated. The molecules take up more space because they are dispersed widely. Their density is lower. Whenever a liquid or gas is cooled, the opposite happens.

When a substance is heated, the molecules move faster and slightly farther apart, taking up more space and causing the density to decrease. When something is cooled, the molecules slow down and get a little closer together, taking up less space and becoming denser.

To learn more about density visit:

https://brainly.com/question/15164682

#SPJ1

Answer:

Organic Chemistry.

Inorganic Chemistry.

Physical Chemistry.

Analytical Chemistry.

Stereochemistry.

Biochemistry.

Geochemistry.

Forensic Chemistry.

Explanation:

Question:

7 types of chemistry

Answer:

Inorganic Chemistry, Physical Chemistry, Analytical Chemistry,  Stereochemistry, Biochemistry, Geochemistry, and Forensic Chemistry.

Explanation:

Inorganic chemistry is a branch of chemistry that deals with inorganic compounds. Physical chemistry is the branch of chemistry concerned with the application of the techniques and theories of physics to the study of chemical systems. Analytical chemistry studies and uses instruments and methods to separate, identify, and quantify matter. Stereochemistry is the branch of chemistry concerned with the three-dimensional arrangement of atoms and molecules and the effect of this on chemical reactions. Biochemistry is the branch of science concerned with the chemical and physicochemical processes and substances that occur within living organisms. Geochemistry is the study of the chemical composition of the earth and its rocks and minerals, and Forensic chemistry is the application of chemistry and its subfield, forensic toxicology.

I hope it helps you!

~XxBells is a cute girlxX~

#Learn with Brainly