The nuclear reactions resulting from thermal neutron absorption in boron and cadmium are 10B5 + 1 n0 ï  7Li3 + 4He2 113Cd48 + 1 n0 ï  114Cd48 + γ[5 MeV] The microscopic thermal absorption cross sections for B-10 and Cd-113 are 3841 b and 20,600 b respectively. Which of these two materials would be the more effective radiation shield? Explain

Answer:

✔️a healthy mind resides in a healthy body.

Explanation:

The seers were of the opinion that "a healthy mind resides in a healthy body."

Just like the English translation of a famous quotation from Thales, pre-Socratic Greek philosopher puts it "a sound mind in a sound body"; which tries to demonstrate the close connections that exists in bodily well-being and one's ability to enjoy life.

The seers were actually of the opinion that a healthy mind resides in a healthy body. It implies that there is connection between the body and the mind. When the body catches an illness, the mind and other parts of the body are affected. When our minds are not healthy, it affects the effective functioning of the body.

So, a healthy mind will definitely be found in a healthy body.

✔️a healthy mind resides in a healthy body.

Explanation:

The seers were of the opinion that "a healthy mind resides in a healthy body."

Just like the English translation of a famous quotation from Thales, pre-Socratic Greek philosopher puts it "a sound mind in a sound body"; which tries to demonstrate the close connections that exists in bodily well-being and one's ability to enjoy life.

The seers were actually of the opinion that a healthy mind resides in a healthy body. It implies that there is connection between the body and the mind. When the body catches an illness, the mind and other parts of the body are affected. When our minds are not healthy, it affects the effective functioning of the body.

So, a healthy mind will definitely be found in a healthy body.

Answer:

For 31 P NMR spectra

low temperature

there is two types of 19f seen in low temperature and they are

therefore in low temperature the 31p couples with the two types of 19F seen ( [tex]b_{f} and c_{f}[/tex]to form a triplet and this couples more with [tex]a_{f}[/tex] to form a doublet. i.e. one (1) peak

High temperature

At High temperature The exchange is fast here therefore the 31p spectra sees all 19p at once and in the same environment leading to the formation of one (1) peak

For 19 P NMR spectra

low temperature

In low temperature [tex]a_{f}, b_{f} , c_{f}[/tex] is fixed  and the environment where [tex]b_{f} and c _{f}[/tex] is the same hence a peak is formed and another peak is formed by [tex]a_{f}[/tex] that makes the number of peaks = 2 peaks

High temperature

In high temperature [tex]a_{f}, b_{f} , c_{f}[/tex]  exchange very fast therefore one peak is formed for all, since the fast exchanges makes NMR machine to take an average and produce just one peak for all

Explanation:

For 31 P NMR spectra

low temperature

there is two types of 19f seen in low temperature and they are

therefore in low temperature the 31p couples with the two types of 19F seen ( [tex]b_{f} and c_{f}[/tex]to form a triplet and this couples more with [tex]a_{f}[/tex] to form a doublet. i.e. one (1) peak

High temperature

At High temperature The exchange is fast here therefore the 31p spectra sees all 19p at once and in the same environment leading to the formation of one (1) peak

For 19 P NMR spectra

low temperature

In low temperature [tex]a_{f}, b_{f} , c_{f}[/tex] is fixed  and the environment where [tex]b_{f} and c _{f}[/tex] is the same hence a peak is formed and another peak is formed by [tex]a_{f}[/tex] that makes the number of peaks = 2 peaks

High temperature

In high temperature [tex]a_{f}, b_{f} , c_{f}[/tex]  exchange very fast therefore one peak is formed for all, since the fast exchanges makes NMR machine to take an average and produce just one peak for all

Explanation:

cooking of duck will cost 48000

by the help of the method of rate × A + €

Answer:

a. 4[tex]\mu m[/tex]

b. 1 m

Explanation:

According to the question, the data is as follows

The Density of water at 20 degrees celcius is 1000 kg/m^3

Viscosity is 0.001kg/m/.s

Velocity V = 25 cm/s

V = 0.25 m/s

Now

a. The creeping motion is

As we know that

Reynold Number = (Density of water × V × d) ÷ (Viscosity)

1 = (1,000 × 0.25 × d) ÷ 0.0001

d = (1 × 0.001) ÷ (1,000 × 0.25)

= 4E - 06^m

= 4[tex]\mu m[/tex]

b. Now the sphere diameter is

Reynold Number = (Density of water × V × d) ÷ (Viscosity)

250,000 = (1,000 × 0.25 × d) ÷ 0.0001

d = (250,000 × 0.001) ÷ (1,000 × 0.25)

= 1 m

Answer:

2.44 mV

Explanation:

This question has to be one of analog quantization size questions and as such, we use the formula

Q = (V₂ - V₁) / 2^n

Where

n = 12

V₂ = higher voltage, 5 V

V₁ = lower voltage, -5 V

Q = is the change in voltage were looking for

On applying the formula and substitutiting the values we have

Q = (5 - -5) / 2^12

Q = 10 / 4096

Q = 0.00244 V, or we say, 2.44 mV

Answer: the mass flux of pollutant through the tube due to advection is 0.0283 mg/cm².s

Explanation:

Given that;

Diameter of tube = 3 cm, radius r = 1.5 cm

water flow is 100 cm³/s

pollutant concentration = 2 mg/L

first we find the rate of flow of pollutant

we know that

1 L = 1000 cm³

xL = 100 cm³

100Lcm³ = xL1000cm³

xL = 100/1000

xL = 1/10 L

so 100cm³ = 1/10 L

now pollutant concentration in 100 cm³ = 1/10L × 2mg/L = 0.2 mg

Rate of flow of pollutant = 0.2 mg/s

Mass flux density is the pollutant mass per unit time per unit area

so Area of tube = πr² = 3.14 × 1.5² = 7.065 cm²

So

Mass flux = 0.2 / 7.065

Mass flux = 0.0283 mg/cm².s

Therefore, the mass flux of pollutant through the tube due to advection is 0.0283 mg/cm².s

Answer:

C. The meter will display a negative sign.

Explanation:

If you use an analog voltmeter and you measure voltage with reverse polarity you will damage it. But in this case we are using a digital multimeter. This kind of multimeter is designed to be able to deal with positive and negative voltages

Answer is given below:

Explanation:

Answer:

A tax is a monetary payment without the right to individual consideration, which a public law imposes on all taxable persons - including both natural and legal persons - in order to generate income. This means that taxes are public-law levies that everyone must pay to cover general financial needs who meet the criteria of tax liability, whereby the generation of income should at least be an auxiliary purpose. Taxes are usually the main source of income of a modern state. Due to the financial implications for all citizens and the complex tax legislation, taxes and other charges are an ongoing political and social issue.

I dont know I asked this to

Explanation:

Answer: overall composition ⇒ 87 wt% { AL₂O₃] + 13% wt { SiO₂}

Explanation:

Given that;

from the phase diagram SiO₂ - Al₂O₃

alumina at 1400°C

mullite + alumina ranges from 74 - 100% wt

so for 50% mullite and 50wt% alumina

we have;

50/100 = 100 - x /  100 - 74

0.5 = 100 - x / 26

0.5 × 26 = 100 - x

13 = 100 - x

x = 100 - 13

x = 87 wt% { AL₂O₃]

[ 100% - 87% = 13%] 13% wt SiO₂

So overall composition ⇒ 87 wt% { AL₂O₃] + 13% wt { SiO₂}

Answer:

a) Real Power (kW) = 1.5 kW

b) Reactive Power (kvar) is 1.1663 KVAR

c) Apparent Power (kVA) is 1.9 KVA

d) the Power Factor cos∅ is 0.7894

e) the impedance Z in polar and rectangular form is 76 ∠ 37.87° Ω

Explanation:

Given that;

V = 380v

i = 5A

P = 1500 W

determine;

a) Real Power (kW)

P = 1500W = 1.5 kW

therefore Real Power (kW) = 1.5 kW

b) Reactive Power (kvar)

p = V×i×cos∅

cos∅ = p / Vi

cos∅ = 1500 / ( 380 × 5 ) = 0.7894

∅ = cos⁻¹ (0.7894)

∅ = 37.87°

Q = VIsin∅

Q = 380 × 5 × sin( 37.87° )

Q = 1.1663 KVAR

Therefore Reactive Power (kvar) is 1.1663 KVAR

c) Apparent Power (kVA)

S = P + jQ

= ( 1500 + J 1166.3 ) VA

S = 1900 ∠ 37.87° VA

S = 1.9 KVA

Therefore Apparent Power (kVA) is 1.9 KVA

d) Power Factor

p = V×i×cos∅

cos∅ = p / Vi

cos∅ = 1500 / ( 380 × 5 ) = 0.7894

Therefore the Power Factor cos∅ is 0.7894

e) The impedance Z in polar and rectangular form

Z = 380 / ( S∠-37.87) = V/I

Z = ( 60 + j 46.647) Ω

Z = 76 ∠ 37.87° Ω

Therefore the impedance Z in polar and rectangular form is 76 ∠ 37.87° Ω

Solution:

Given that :

Volume flow is, [tex]$Q_1 = 1000 \ mm^3/s$[/tex]

So, [tex]$Q_2= \frac{1000}{100}=10 \ mm^3/s$[/tex]

Therefore, the equation of a single straight vessel is given by

[tex]$F_{f_1}=\frac{8flQ_1^2}{\pi^2gd_1^5}$[/tex]    ......................(i)

So there are 100 similar parallel pipes of the same cross section. Therefore, the equation for the area is

[tex]$\frac{\pi d_1^2}{4}=1000 \times\frac{\pi d_2^2}{4} $[/tex]

or [tex]$d_1=10 \ d_2$[/tex]

Now for parallel pipes

[tex]$H_{f_2}= (H_{f_2})_1= (H_{f_2})_2= .... = = (H_{f_2})_{10}=\frac{8flQ_2^2}{\pi^2 gd_2^5}$[/tex]  ...........(ii)

Solving the equations (i) and (ii),

[tex]$\frac{H_{f_1}}{H_{f_2}}=\frac{\frac{8flQ_1^2}{\pi^2 gd_1^5}}{\frac{8flQ_2^2}{\pi^2 gd_2^5}}$[/tex]

       [tex]$=\frac{Q_1^2}{Q_2^2}\times \frac{d_2^5}{d_1^5}$[/tex]

       [tex]$=\frac{(1000)^2}{(10)^2}\times \frac{d_2^5}{(10d_2)^5}$[/tex]

       [tex]$=\frac{10^6}{10^7}$[/tex]

Therefore,

[tex]$\frac{H_{f_1}}{H_{f_2}}=\frac{1}{10}$[/tex]

or [tex]$H_{f_2}=10 \ H_{f_1}$[/tex]

Thus the answer is option A). 10

This question is incomplete, the complete question is;

Find the magnitude of the steady-state response of the system whose system model is given by

dx(t)/dt + x(t) = f(t)

where f(t) = 2cos8t.  Keep 3 significant figures

Answer: The steady state output x(t) = 0.2481 cos( 8t - 45° )

Explanation:

Given that;

dx(t)/dt + x(t) = f(t)  where f(t) = 2cos8t

dx(t)/dt + x(t) = f(t)

we apply Laplace transformation on both sides

SX(s) + x(s) = f(s)

(S + 1)x(s) = f(s)

f(s) / x(s) = S + 1

x(s) / f(s) = 1 / (S + 1)

Therefore

transfer function = H(s) = x(s)/f(s) = 1/(S+1)

f(t) = 2cos8t →   [ 1 / ( S + 1 ) ]   →  x(t) = Acos(8t - ∅ )

A = Magnitude of steady state output

S = jw

S = j8

so

A = 2 × 1 / √( 8² + 1 ) = 2 / √ (64 + 1 )

A = 2/√65 = 0.2481

∅ = tan⁻¹( 1/1) = 45°

therefore The steady state output x(t) = 0.2481 cos( 8t - 45° )

Answer:

a) volume flow rate of air at the inlet is 0.0471 m³/s

b) the velocity of the air at the exit is  8.517 m/s

Explanation:

Given that;

The electrical power Input W_elec = -1400 W = -1.4 kW

Inlet temperature of air T_in = 22°C

Inlet pressure of air p_in = 100 kPa

Exit temperature T_out = 47°C

Exit area of the dyer is A_out = 60 cm²= 0.006 m²

cp = 1.007 kJ/kg·K

R = 0.287 kPa·m3/kg·K

Using mass balance

m_in = m_out = m_air

W _elec = m_air ( h_in - h_out)

we know that h = CpT

so

W _elec = m_air.Cp ( T_in - T_out)

we substitute

-1.4 = m_air.1.007 ( 22 - 47 )

-1.4 =  - m_air.25.175

m_air = -1.4 / - 25.175

m_ air = 0.0556 kg/s

a) volume flow rate of air at the inlet

we know that

m_air = P_in × V_in

now from the ideal gas equation

P_in = p_in / RT_in

we substitute our values

= (100×10³) / ((0.287×10³)(22+273))

= 100000 / 84665

P_in = 1.18 kg/m³

therefore inlet volume flowrate will be;

V_in = m_air / P_in

= 0.0556 / 1.18

= 0.0471 m³/s

the volume flow rate of air at the inlet is 0.0471 m³/s

b) velocity of the air at the exit

the mass flow rate remains unchanged across the duct

m_ air = P_in.A_in.V_in = P_out.A_out.V_out

still from the ideal gas equation

P_out = p_out/ RT_out   ( assume p_in = p_out)

P_out = (100×10³) / ((0.287×10³)(47+273))

P_out  = 1.088 kg/m³

so the exit velocity will be;

V_out = m_air / P_out.A_out

we substitute our values

V_out = 0.0556 / ( 1.088 × 0.006)

= 0.0556 / 0.006528

= 8.517 m/s

 Therefore the velocity of the air at the exit is  8.517 m/s

Answer:

Yes it is possible.

Explanation:

This problem is about to possibility to have alloy of iron-carbon for which mass fraction of ferrite, [tex]$W_{\alpha} = 0.846$[/tex]  and proeutectoid cementite, [tex]$W_{Fe_3C}=0.049$[/tex]

An alloy formation is possible when the composition values of the two alloy are equal.

Now writing the expression for the mass fraction of total ferrite, we have

[tex]$W_{\alpha}=\frac{C_{Fe_3C}-C_0}{C_{Fe_3C}-C_{\alpha}}$[/tex]

[tex]$0.846}=\frac{6.70-C_0}{6.70-0.022}$[/tex]

[tex]$5.649588 = 6.70 - C_0$[/tex]

[tex]$\therefore C_0 = 1.05 $[/tex] wt. % of C

Now write the expression for the mass fraction of the proeutectoid cementite :

[tex]$W_{Fe_3C}=\frac{C_1-0.76}{5.94}$[/tex]

[tex]$0.049=\frac{C_1-0.76}{5.94}$[/tex]

[tex]$C_1 = 1.05$[/tex] % wt. C

Since, [tex]$C_0 =C_1$[/tex], it is possible to have an alloy of iron - carbon.

Answer:

Option B (Cold working) would be the correct alternative.

Explanation:

The other possibility isn't linked to the given scenario. Therefore the alternative above is the right one.

Answer:

Velocity of 5 cm diameter pipe is 1.38 m/s

Explanation:

Use following equation of Relation between the Reynolds numbers of both pipes

[tex]Re_{5}[/tex] = [tex]Re_{12}[/tex]

[tex]\sqrt{\frac{V_{5}XD_{5} }{v_{5}}}[/tex]= [tex]\sqrt{\frac{V_{12}XD_{12} }{v_{12}}}[/tex]

[tex]Re_{5}[/tex] = Reynold number of water pipe

[tex]Re_{12}[/tex] = Reynold number of oil pipe

[tex]V_{5}[/tex] = Velocity of water 5 diameter pipe = ?

[tex]V_{12}[/tex] = Velocity of oil 12 diameter pipe = 2.30

[tex]v_{5}[/tex] = Kinetic Viscosity of water = 1 x [tex]10^{-6}[/tex] [tex]m^{2}[/tex]/s

[tex]v_{12}[/tex] = Kinetic Viscosity of oil =  4 x [tex]10^{-6}[/tex] [tex]m^{2}[/tex]/s

[tex]D_{5}[/tex] = Diameter of pipe used for water = 0.05 m

[tex]D_{12}[/tex] = Diameter of pipe used for oil = 0.12 m

Use the formula

[tex]\sqrt{\frac{V_{5}XD_{5} }{v_{5}}}[/tex]= [tex]\sqrt{\frac{V_{12}XD_{12} }{v_{12}}}[/tex]

By Removing square rots on both sides

[tex]{\frac{V_{5}XD_{5} }{v_{5}}}[/tex]= [tex]{\frac{V_{12}XD_{12} }{v_{12}}}[/tex]

[tex]{V_{5}[/tex]= [tex]{\frac{V_{12}XD_{12} }{v_{12}XD_{5}\\}}[/tex]x[tex]v_{5}[/tex]

[tex]{V_{5}[/tex]= [ (0.23 x 0.12m ) / (4 x [tex]10^{-6}[/tex] [tex]m^{2}[/tex]/s) x 0.05 ] 1 x [tex]10^{-6}[/tex] [tex]m^{2}[/tex]/s

[tex]{V_{5}[/tex] = 1.38 m/s

Answer:

A. 72.34mol/min

B. 76.0%

Explanation:

A.

We start by converting to molar flow rate. Using density and molecular weight of hexane

= 1.59L/min x 0.659g/cm³ x 1000cm³/L x 1/86.17

= 988.5/86.17

= 11.47mol/min

n1 = n2+n3

n1 = n2 + 11.47mol/min

We have a balance on hexane

n1y1C6H14 = n2y2C6H14 + n3y3C6H14

n1(0.18) = n2(0.05) + 11.47(1.00)

To get n2

(n2+11.47mol/min)0.18 = n2(0.05) + 11.47mol/min(1.00)

0.18n2 + 2.0646 = 0.05n2 + 11.47mol/min

0.18n2-0.05n2 = 11.47-2.0646

= 0.13n2 = 9.4054

n2 = 9.4054/0.13

n2 = 72.34 mol/min

This value is the flow rate of gas that is leaving the system.

B.

n1 = n2 + 11.47mol/min

72.34mol/min + 11.47mol/min

= 83.81 mol/min

Amount of hexane entering condenser

0.18(83.81)

= 15.1 mol/min

Then the percentage condensed =

11.47/15.1

= 7.59

~7.6

7.6x100

= 76.0%

Therefore the answers are a.) 72.34mol/min b.) 76.0%

Please refer to the attachment .

Answer:

[tex]10.8\ \text{lb/ft^2}[/tex]

[tex]101.96\ \text{lb/ft}^2[/tex]

Explanation:

[tex]v_1[/tex] = Velocity of car = 65 mph = [tex]65\times \dfrac{5280}{3600}=95.33\ \text{ft/s}[/tex]

[tex]\rho[/tex] = Density of air = [tex]0.00237\ \text{slug/ft}^3[/tex]

[tex]v_2=0[/tex]

[tex]P_1=0[/tex]

[tex]h_1=h_2[/tex]

From Bernoulli's law we have

[tex]P_1+\dfrac{1}{2}\rho v_1^2+h_1=P_2+\dfrac{1}{2}\rho v_2^2+h_2\\\Rightarrow P_2=\dfrac{1}{2}\rho v_1^2\\\Rightarrow P_2=\dfrac{1}{2}\times 0.00237\times 95.33^2\\\Rightarrow P_2=10.8\ \text{lb/ft^2}[/tex]

The maximum pressure on the girl's hand is [tex]10.8\ \text{lb/ft^2}[/tex]

Now [tex]v_1[/tex] = 200 mph = [tex]200\times \dfrac{5280}{3600}=293.33\ \text{ft/s}[/tex]

[tex]P_2=\dfrac{1}{2}\rho v_1^2\\\Rightarrow P_2=\dfrac{1}{2}\times 0.00237\times 293.33^2\\\Rightarrow P_2=101.96\ \text{lb/ft}^2[/tex]

The maximum pressure on the girl's hand is [tex]101.96\ \text{lb/ft}^2[/tex]

Answer:Poisson's Ratio,μ =  0.46

Explanation:

Poisson's Ratio is calculate as

μ = transverse/ longitudinal strain 

μ = -  εt / εl                          

where

μ = Poisson's ratio

εt = transverse strain

εl = longitudinal  strain  

Transverse strain can be expressed as

εt = change in diameter / initial diameter                            

where

εt =transverse  strain  

change in diameter=0.007mm

initial diameter = 10mm

εt =0.007mm/ 10mm= 0.0007

Longitudinal strain can be expressed as

εl=Stress/ elastic modulus =  σ/ E

= Stress = 150 MPa ,  converting to GPa becomes 150/1000 = 0.15 GPa

εl=  0.15 GPa / 100  GPa= 0.0015

Poisson's Ratio,μ = transverse/ longitudinal strain

( 0.0007 /0.0015) = 0.46 =0.46

Answer:

51112.5 ft^3

Explanation:

Determine the volume needed along the road when we assume a 6% shrinkage

shrinkage factor = 1 - shrinkage  = 1 - 0.06 =  0.94

first we have to calculate the volume between the cross sectional areas (i.e. A1 ---- A5 ) using average end area method

Volume between A1 - A2

= (125 ft - 0 ft) * [(130 ft^2 + 140 ft^2) / 2]

 = 125 ft * 135 ft^2

= 16875 ft^3

Volume between A2 - A3

= (250 ft - 125 ft) * [(140 ft^2 + 60 ft^2) / 2]

= 125 ft * (200 ft^2 / 2)

= 12500 ft^3

Volume between A3 - A4

= (375 ft - 250 ft) * [(60 ft^2 + 110 ft^2) / 2]

= 125 ft * (170 ft^2 / 2)

= 10625 ft^3

Volume between A4 - A5

(500 ft - 375 ft) * [(110 ft^2 + 120 ft^2) / 2]

 = 125 ft * 115 ft^2

= 14375 ft3

Hence the total volume along the 500 ft road

= ∑ volumes between cross sectional areas

=  16875 ft^3 + 12500 ft^3 + 10625 ft^3 + 14375 ft^3 = 54375 ft^3

Finally the volume needed along this road is calculated as

Total volume * shrinkage factor

= 54375 * 0.94  = 51112.5 ft^3

Answer:

hello your question is incomplete attached below is the missing part of the  question

Consider an inverter operating a power supply voltage VDD. Assume that matched condition for this inverter. Make the necessary assumptions to get to an answer for the following questions.

answer : Nd ∝ rt

Explanation:

Determine how the delay and active power per device will change as the doping density of N- and P-MOSFET increases

Pactive ( active power ) = Efs * F

Pactive = [tex]\frac{q^2Nd^2*Xn^2}{6Eo} * f[/tex]

also note that ; Pactive ∝ Nd2 (

tD = K . [tex]\frac{Vdd}{(Vdd - Vt )^2}[/tex]  since K = constant

Hence : Nd ∝ rt

Answer:

the closest distance the center of gravity can be behind the front axle to have the vehicle achieve its maximum acceleration from rest on good, wet pavement is 47.8 in

Explanation:

Given that;

Weight of car W = 2600 lb

power = 80 hp = 44000 lb ft/s

Engine rpm = 3296

gear reduction ratio e = 10

drivetrain efficiency n = 95% = 0.95

wheel radius R = 16 in  = 1.3333 ft

Length of wheel base L = 95 in =

coefficient of road adhesion u = 0.60

height of center of gravity above pavement  h = 22 in

we know that;

Coefficient of rolling resistance frl = 0.01 for good wet pavement

distance of center of gravity behind the front axle lf = ?

Maximum tractive effort (Fmax) =  (uW / L) (lf - frl h) / (1 - uh / L)

First we calculate our Fmax to help us find lf

Power = Torque × 2π × Engine rpm / 60 )

44000 = Torque ( 2π×3296 / 60)

Torque = 127.5 lb ft  

so

Fmax = Torque × e × n / R

so we substitute in our values

Fmax = 127.5 × 10 × 0.95 / 1.333

Fmax = 908.66 lb

Now we input all our values into the initial formula

(Fmax) =  (uW / L) (lf - frl h) / (1 - uh / L)

908.66 =  [(0.6×2600/95) (lf - 0.01×22)] / [1 - 0.6×22) / 95]

908.66 = (16.42( lf - 0.22)) / 0.86

781.4476 = (16.42( lf - 0.22))

47.59 = lf - 0.22

lf = 47.59 + 0.22

lf = 47.8 in

Therefore the closest distance the center of gravity can be behind the front axle to have the vehicle achieve its maximum acceleration from rest on good, wet pavement is 47.8 in

Solution :

Sieve Size (in)                   Weight retain(g)

3                                         1.62

2                                         2.17

[tex]$1\frac{1}{2}$[/tex]                                       3.62

[tex]$\frac{3}{4}$[/tex]                                        2.27

[tex]$\frac{3}{8}$[/tex]                                        1.38

PAN                                    0.21

Given :

Sieve       weight       % wt. retain    % cumulative       % finer

size        retained                               wt. retain

No. 4        59.5            10.225%          10.225%            89.775%

No. 8        86.5            14.865%          25.090%           74.91%

No. 16       138              23.7154%        48.8054%         51.2%

No. 30      127.8           21.91%              70.7154%          29.2850%

No. 50      97               16.6695%         87.3849%         12.62%

No. 100     66.8            11.4796%         98.92%              1.08%

Pan            6.3               1.08%              100%                   0%

                581.9 gram

Effective size = percentage finer 10% ([tex]$$D_{20}[/tex])

0.149 mm, N 100, % finer 1.08

0.297, N 50 , % finer 12.62%

x  ,   10%

[tex]$y-1.08 = \frac{12.62 - 1.08}{0.297 - 0.149}(x-0.149)$[/tex]

[tex]$(10-1.08) \times \frac{0.297 - 0.149}{12.62 - 1.08}+ 0.149=x$[/tex]

x = 0.2634 mm

Effective size, [tex]$D_{10} = 0.2643 \ mm$[/tex]

Now, N 16 (1.19 mm)  ,  51.2%

N 8 (2.38 mm)  ,  74.91%

x,  60%

[tex]$60-51.2 = \frac{74.91-51.2}{2.38-1.19}(x-1.19)$[/tex]

x = 1.6317 mm

[tex]$\therefore D_{60} = 1.6317 \ mm$[/tex]

Uniformity co-efficient = [tex]$\frac{D_{60}}{D_{10}}$[/tex]

   [tex]$Cu= \frac{1.6317}{0.2643}$[/tex]

Cu = 6.17

Now, fineness modulus = [tex]$\frac{\Sigma \text{\ cumulative retain on all sieve }}{100}$[/tex]

[tex]$=\frac{\Sigma (10.225+25.09+48.8054+70.7165+87.39+98.92+100)}{100}$[/tex]

= 4.41

which lies between No. 4  and No. 5 sieve [4.76 to 4.00]

So, fineness modulus = 4.38 mm

Answer:

hello your question has a missing part below is the missing part

Consider the string length equal to [tex]\pi[/tex]

answer : 2cos(2t) sin(2x) - 10cos(10t)sin(10x)

Explanation:

Given string length = [tex]\pi[/tex]

distorted function f(x) = 2sin(2x) - 10sin(10x)

Determine the wave formed in the string

attached below is a detailed solution of the problem

Answer:

pascals is this = 101352.972 Pa

Explanation:

given data

Atmosphere pressure at sea level = 14.7 lb/in²

we convert 1 Pa = 1 N/m² to lb/ft²

so we convert here  14.7 lb/in² to pascals

we know that 1 lb/ft² = 47.990172 N/m²

so

1 lb/ft² × ft²/(12in)²  = 47.990172  ×  144 N/m²

it will be simplyfy

1 lb/ft²  = 6894.76 N/m²  

so

14.7 lb/in² = 14.7 × 6894.76 N/m²  

14.7 lb/in² =  101352.972 Pa

dutile is the correct answer

Answer:

Water enters a centrifugal pump axially at atmospheric pressure at a rate of 0.12 m3/s and at a velocity of 7 m/s, and leaves in the normal direction along the pump casing, as shown in Fig. PI3-39. Determine the force acting on the shaft (which is also the force acting on the bearing of the shaft) in the axial direction.

Step-by-step solution:

Step 1 of 5

Given data:-

The velocity of water is .

The water flow rate is.

Answer: the discharge observed at a v-notch weir is 66.7 in³/s

Explanation:

Given that;

Notch angle ∅ = 90°

height above the weir is 3 inches { head + head correction factor) h + k = 3 in

Discharge Q = ?

To determine the discharge observed, we us the following expression

Q = 4.28Ctan(∅/2) ( h + k )^5/2

where Q is discharge, C is discharge coefficient, ∅ is notch angle, h is head and k is head correction factor

now we substitute

Q = 4.28 × 1 × tan(90/2) ( 3 )^5/2

Q = 4.28 × 1 × 1 × 15.5884

Q =  66.7 in³/s

Therefore the discharge observed at a v-notch weir is 66.7 in³/s