The specific heat of the metallic element rhodium is 0. 240 j/g-k at 25°c. If 586 j of heat is added to an 80. 0 g block of rhodium metal that is initially at 25. 0°c, the expected final temperature of the block 55.5 °C.
As we know heat is equal to:
Q= mcΔT
Given values:
M= 80 g
C = 0.240 J/g K
Q= 586 J
To find final temperature
ΔT = 586 / 80 x 0.240 = 30.5 °C
Final temperature =25 + 30.5 = 55.5 °C
The final temperature is 55.5 °C.
If you need to learn more about questions related to specific heat, click here
brainly.com/question/25878495?referrer=searchResults
#SPJ4
8. Given a sample of gas at SATP, determine the final pressure if the temperature is heated to 45°C and
the volume remains constant.
1.06 atm
A sample of gas at STP,
what will be the final pressure if the temperature is heated to 45°C and
the volume remains constant.
as per above statement , we got
pressure = 1 atm
volume = v
temperature = 298 k ( k stands for kelvin)
now, we have to find the final pressure as temperature increases to 318 kelvin and volume remain sames.
so, now, by applying ideal gas equation,
PV = nRT
here n and R is constant , so we neglect it,
now equation become
P1V/T1 = P2V/T2
Now, putting all the values
1/298 = p2/318
p2 = 318/298
p2 = 1.06 atm
To know more about ideal gas visit :
https://brainly.com/question/28257995
#SPJ9
A 2.00g sample of C2H5OH undergoes condensation. The molar enthalpy of vaporization, ΔHvap, of C2H5OH is +38.6kJ/mol. Which of the following best identifies the change in enthalpy in the phase transition?
A) +19.3 kJ
B) +77.2 kJ
C) -19.3 kJ
D) -77.2 kJ
The change in enthalpy in the phase transition is -1.6598 KJ/mol.
As the enthalpy of vaporization and enthalpy of condensation are just the same with only difference being in their signs.The enthalpy of condensation of ethanol is -38.6 KJ/mol .For 2 g sample the enthalpy is calculated as,
number of moles of ethanol=2/46=0.043 moles
38.6 KJ of heat is absorbed for condensation of one mole of ethanol.
Therefore,heat absorbed for condensation of 0.043 moles of ethanol is,
-38.6×0.043=-1.6598 KJ
What is enthalpy of condensation?The enthalpy of condensation is defined as amount of heat which is released when a substance undergoes transformation from gas to liquid phase.Less energy is required to change from solid to liquid than from a liquid to gas.It has units of KJ/mol.
Condensation is an exothermic process as heat is absorbed and is given off from the system into the surroundings. It possesses values which are always negative.
Learn more about enthalpy of condensation,here:
https://brainly.com/question/3149167
#SPJ1
Your question is incomplete, but most probably the options were:
A)+19.3 KJ
B)+77.2 KJ
C) -19.3 KJ
D)-77.2 KJ
E)-1.6598 KJ
For which question could a scientist develop a testable hypothesis?
Which grocery store is the best?
When will dinosaurs roam Earth again?
Do all kinds of wood float in water?
Should everyone use solar-powered cars?
The question that a scientist can develop a testable hypothesis is as follows: Do all kinds of wood float in water? (option C).
What is a hypothesis?A hypothesis is a tentative conjecture explaining an observation, phenomenon or scientific problem that can be tested by further observation, investigation and/or experimentation.
The construction of hypothesis is a vital component of any experiment, which must be testable.
However, prior to the construction of hypothesis, a scientific question must be asked.
According to this question, the question that a scientist can develop a testable hypothesis is as follows: Do all kinds of wood float in water? The testable hypothesis will be to use different wood on water.
Learn more about hypothesis at: https://brainly.com/question/17173491
#SPJ1
consider the following questions about polyprotic acids and determine if each statement is true or false. for polyprotic acids ka1 is typically much smaller than ka2 for most polyprotic acids, each proton dissociation can be looked at separately for most polyprotic acids all ka values must be considered to determine the ph of the solution
For polyprotic acid ka1 is greater than ka2 , each proton dissociation can be looked at sepatertely and all the ka values must be not considered to determine the PH.
Polyprotic acids is a substance capable of donating more than one proton. Di protic and tri protic are the one capable of donating two o three proton,respectively.
For polyprotic acid ka1 is smaller than ka2 is not correct. for polyprotic acid ka1 is greater than ka2 as they have tendency to give off more than one H+ ion.
The proton dissociation can be looked at separately for most polyprotic acid is correct . each proton dissociation can be look at separately.
All ka values must be consider to determine the PH of solution is not correct.we can use ka1 as an approx because ka2 is considerably smaller no.
Thus, for polyprotic acid ka1 is greater than ka2, each proton dissociation can be looked at separately and all the [tex]K{a}[/tex] values must not be considered to determine the PH.
To learn more about polyprotic acid here
https://brainly.com/question/28175869
#SPJ4
Marco put a pot of water on to boil eggs. after a few minutes all the water was This is an example of _____.
Multiple choice question.
A)
condensation
B)
deposition
C)
sublimation
D)
vaporization
Answer:
D) vaporizationExplanation:
Marco put a pot of water on to boil eggs. after a few minutes all the water was dry
This is an example of vaporization.hopefully this helps you!
3. Give 2 examples of intensive properties
Answer:
examples of intensive properties are colours and density
Which sentence from the article BEST supports the idea that not all liquids evaporate at the same temperature?
A
The temperature at which a liquid turns into a gas is called its boiling point.
B
That same temperature can be considered the melting point if the temperature is increasing and causes a solid to become a liquid.
C
For example, liquid water turns to a solid form — ice — when it is cooled to 32 degrees Fahrenheit (0 degrees Celsius).
D
Different types of matter have different boiling, melting and freezing points.
The sentence which BEST supports the idea that not all liquids evaporate at the same temperature is: Different types of matter have different boiling, melting and freezing points; option D
What is evaporation?Evaporation is the process by which a liquid substance spontaneously changes to liquid.
Evaporation of a liquid is affected by the following factors:
the nature of the liquidthe boiling point of the liquidthe presence of windrelative humiditySubstances with low boiling point usually evaporate at a faster rate tan substances with higher boiling points.
However, due to the nature of various substances, different types of matter have different boiling, melting and freezing points. Thus, not all liquids evaporate at the same temperature.
Learn more about evaporation at: https://brainly.com/question/24258
#SPJ1
Which of the following does not describe a physical property of iron?
A
B
C
D
Iron is silvery-white or gray in color.
Iron has a boiling point of about 3,000°C.
Iron is a magnetic element.
Iron and sulfur react to form iron sulfide.
BACK
Answer:
D: Iron and sulfur react to form iron sulfide.
Explanation:
To make iron sulfide you need to combined Iron and Sulfur atoms, producing a chemical reaction.
Lizards have one. Elephants have one. Even
fish have one. You have one, too! What do you all
have? You all have skeletons.
Skeletons are the bones inside animals' bodies.
The skeleton is a frame that has muscles, blood
vessels, and skin wrapped around it. Skeletons
give vertebrates-humans and
many other
animals-their shape. You can identify many
animals just by looking at their skeletons.
Find the important details
Answer:
Most animals have skeletons that give those animals their shape. You can identify most of those animals by those same skeletons.
Explanation:
The passage
How to convert a velocity of 2.03x10 to the -9 cm/min. to m/s.
The velocity in m/s will be 0.03 x 10^-11 m/s
2.03x10^-9 cm/min x 1 m/100 cm x 1 min/60 sec =
0.03 x 10^-11 m/s
What is Velocity ?As a vector measurement of the rate and direction of motion, velocity is defined. Velocity can be defined as the rate of movement in one direction. Velocity may be used to calculate the speed of a car moving north on a major motorway and the speed of a rocket launching into space.
There are several various forms of velocity, including uniform, variable, average, and instantaneous.According to the equation v = s/t, velocity (v) is a vector quantity that quantifies displacement (or change in position, s), over change in time (t).Learn more about Velocity here:
https://brainly.com/question/25749514
#SPJ9
The density of enthanol is 0.789 g/ml at 20 c what is the mass of a sample of ethanol at this temperature that has a volume of 175.0 ml?
The mass of a sample of ethanol at 20°C is with volume 175.0 mL and density 0.789 g/mL is 138.075 g.
Density is defined as the mass of a substance per unit volume. It is denoted by ρ.
The mass of a substance when the density and volume is given can be found by using the formula -
Density = mass
volume
ρ = m
v
Given data -
volume of ethanol = 175.0 mL
density = 0.789 g/mL
So, the mass is -
Mass = density x volume
mass = 0.789 g/mL x 175.0 mL
mass = 138.075 g
To learn more about density,
brainly.com/question/2388798
#SPJ4
a coffee-cup calorimeter contains 130.0 g of water at 25.1 ∘c . a 124.0-g block of copper metal is heated to 100.4 ∘c by putting it in a beaker of boiling water. the specific heat of cu(s) is 0.385 j/g⋅k. the cu is added to the calorimeter, and after a time the contents of the cup reach a constant temperature of 30.1 ∘c .
With the principle of calorimetry the total heat lost by the copper block is 3356.12 J and the heat gained by the water is 2719.60 J.
What is the principle of Calorimetry?A Calorimeter is a vessel made of copper with a stirrer of the same material. The vessel is kept in a wooden box to isolate it thermally from the surrounding. A thermometer is used to measure the temperature of the contents of the calorimeter. Objects at different temperatures are made to come in contact with each other in the calorimeter. As a result, heat is exchanged between the objects as well as with the calorimeter. Neglecting any heat exchange with the surrounding, the principle of calorimetry states that - the total heat given by the hot bodies equals the total the total heat received by the cold bodies.
Here in the question, we have water at [tex]T_w=25.1[/tex]°C and a block of copper metal at [tex]T_c=100.4[/tex]°C.
Mass of Water, [tex]M_w[/tex] = 130 g.
Mass of Copper, [tex]M_c[/tex] =124 g.
The contents of the calorimeter reach a constant temperature of T = 30.1° C.
Temperature of copper block, [tex]T_c=[/tex] 100.4°C.
Temperature of Water, [tex]T_w=[/tex] 25.1°C.
According to the principle of calorimetry, amount of heat gained or lost by the body is given by,
[tex]Q=M.C.(T_f-Ti)[/tex]
where,
[tex]M[/tex]= Mass of the body.
C = Specific heat capacity of the substance.
[tex]T_f=[/tex] Final temperature of the substance.
[tex]T_i=[/tex] Initial temperature of the substance.
Now, the heat lost by the copper block will be,
[tex]Q_c=M_c.C_c.(T-T_c)[/tex].
[tex]C_c=[/tex] 0.3875 J/g-K
So,
[tex]Q_c=[/tex] 124×0.385×(30.1-100.4)
[tex]Q_c=[/tex] -3356.12 J ; negative sign indicate that the heat is rejected.
Now, the heat gained by water will be,
[tex]Q_w=M_w.C_w.(T_w-T)[/tex]
[tex]C_w=[/tex] 4.18 J/g-K
So,
[tex]Q_w=[/tex] 130×4.18×(30.1-25.1)
[tex]Q_w=[/tex] 2719.60 J.
To know more about the Principle of calorimetry, visit
https://brainly.com/question/3609481
#SPJ4.
Why is the ocean cold in the day but warm at night?
In the day time the ocean absorbs the sunlight which is coming from the sun and at the night time the sun is not present so then the ocean releases that warmness.
Why is the ocean cold in the day but warm at night?
The heat that the ocean absorbs is blended with the lower water quickly. That blending spreads the heat round. At night, at the same time as the land cools off quickly, the water on the surface is saved hotter because the water is mixed round with the hotter water underneath.
It is courtesy of the ocean breeze effect. countrywide weather service meteorologist Walter Drag explains that it takes place due to the distinction among the warm air over land and funky air soaring over the ocean .
So we can conclude that in the day time the ocean absorbs the sunlight which is coming from the sun and at the night time the sun is not present so then the ocean releases that warmness.
Learn more about Ocean here:https://brainly.com/question/26846829
#SPJ1
when people throw a coin in a fountain why do the coins drop to the bottom of fountain
The coin drops to the bottom of the fountain because of its density.
Density influences why some things float while others sink. Objects with tightly packed molecules are denser than those with loosely packed molecules. If an object's density is higher than that of water, it sinks in the water, and if it is lower than water, it floats. It means lighter objects float while heavier objects sink in water.
The molecules in the coin are more tightly packed, therefore its density is greater than that of water. It means the coin is heavier than water. As a result, when people throw a coin into a fountain, it sinks to the bottom since heavy objects tend to sink in water.
Read more about Density:
https://brainly.com/question/14661161
#SPJ1
The km of an enzyme is 5. 0 mm. Calculate the substrate concentration when this enzyme operates at one‑quarter of its maximum rate.
The substrate concentration of this enzyme operates at one‑quarter of its maximum rate is = 0.333.
What is the relationship between Km and substrate concentration?In practice, Km is the concentration of substrate that allows the enzyme to achieve half Vmax. An enzyme with a high Km has a low affinity for its substrate and requires a higher concentration of substrate to achieve Vmax." Because Km is a constant, increasing the substrate concentration has no effect on it. The substrate concentration Km corresponds to the substrate concentration at which the reaction rate of the enzyme-catalyzed reaction is half of the maximum reaction rate Vmax.Steps of the equation :
[tex]V_{0} = \frac{V_{max}[5] }{[5]+Km}[/tex]
Fraction of [tex]V_{max}[/tex] :
[tex]\frac{V_{0} }{V_{max}} = \frac{[5]}{[5] + Km} = \frac{0.5 Km}{1.50 + Km} = 0.333[/tex]
The substrate concentration of this enzyme operates at one‑quarter of its maximum rate is = 0.333.
To learn more about substrate concentration refer to
https://brainly.com/question/24419453
#SPJ4
The answer is: To think of different kinds of materials to use
Glass, Metal, Wood, Ceramic, Plastic are different kind of materials to be used.
Glass is versatile material, which is made up of sand and silicon dioxide. Most familiar glass today is soda-lime silica glass. they have properties like hardness, transparency and heat resistance.
Metals are the important materials found in earth and they are used in a vide variety of applications. Aluminium, iron and copper are some of the examples of metals. they can combined together to makes alloys. they have properties like conductivity, lustre and malleability.
Wood is the most common and easily available material. two kinds of wood are there hardwood and softwood. they are used in construction and as fuel for burning.
Ceramic are substances which are inorganic and non-metallic in nature. they are used to make pots, vessels etc. they are hard, heat resistant, and resistant to corrosion
Plastic are up of long chain of molecules. they are used in the production of variety of substances.. there are different types of plastics. they are cost friendly, strong and durable, resistant to water and electricity.
learn more about materials used here https://brainly.com/question/522801
#SPJ9
minant in horses, and curly hair is recessive. Black hair is dominant, and chestnut hair is r
enotes black and b denotes chestnut, classify the alleles according to their types.
SS
BB
bb
Ss
Bb
Homozygous
Dominant
SS
Heterozygous
Homozygous
Recessive
Genotypes ratios are 1 : 2 : 1 for brown yellow tannish and white horse
The term "genotype" broadly refers to an organism's genetic make-up; in other terms, it characterizes an organism's whole gene pool. The phrase can also be used to describe to the genotypes, or different versions of a genome, that an organism carries in a more specific meaning.
Genotypes are as follows:
brown horses are BB
white horses are bb genotype
yellow-tannish colored horse are Bb genotype
Brown × White (Bb× bb)
100% Bb genotype
Brown × Yellow tannish colored horse(BB × bb)
25% BB, 50% Bb, 25% bb
Hence, The ratio which the brown yellow tannish and white horse holds are as follows
1 : 2 : 1
Learn more about genotype here
https://brainly.com/question/22117
#SPJ9
A graduated cylinder has a mass of 80.0 g when empty. When 20.0 mL of water is added, the
graduated cylinder has a mass of 100.0 g. If a stone is added to the graduated cylinder, the water level rises to 45.0 mL and the total mass is now 156.0 g. What is the density of the stone?
Answer:
2.24g/
Explanation:
mass of water is found by getting 5he extra mass the cylinder gained after adding
100g-80g=20g - mass of water
Density of water: 1g/cm³ that means that 20g water has a volume of 20cm³
1cm³=1ml; 20cm³=20ml
volume of stone is the extra height the water gained: 45ml-20ml =
25ml
mass of stone is the extra mass now earned:
156g-100g=56g
Density of stone=mass of stone÷divide by volume of stone
56g÷25ml=
2.24g/ml
What is true about these two pictures? PLS HELP ME
Both A and B are molecules.
Both A and B are elements.
A is a compound, but B is an element.
A is an element, but B is a compound.
Answer:
Both A and B are molecules.
How many molecules of water are required for the hydrolyzation of a polymer that is 22 monomer-long cellulose molecule?.
21 molecules of water are required for the hydrolyzation of a polymer that is 22 monomer-long cellulose molecule.
For hydrolyzation of 22 monomer-long cellulose molecule, 21 molecules of water are required. As for three monomer polymer there are 2 bonds so we require two water molecules.
The process of hydrolyzation is a step-by-step reaction in which-
The first step is the condensation of one glucose molecule to produce a 2 monomer-long chain, which releases one molecule of water.
The second step is reaction between the 2 monomer-long chain with other glucose molecule, which release an extra molecule of water.
These steps are repeated until 21 condensation reactions occurs, to give 22 monomer-long cellulose molecule.
The OH group from first monomer of the glucose unit and H group from second monomer is removed in the form of water molecules, when polymer bond is formed.
The reaction is known as the condensation reaction. It is referred to as the loss of water in a chemical reaction.
Therefore, 22 monomer long cellulose molecule indicates 21 reactions of condensation with release of 21 molecules of water.
To learn more about monomers,
brainly.com/question/14786938
#SPJ1
If a student did not completely dry the erlenmeyer flask after heating and letting it cool and obtained the mass, how would this specifically affect the calculated mw in the mw by vapor experiment?
If the student do not completely dry the Erlenmeyer flask after heating and let it cool and obtains the mass, then the results will not be accurate.
It is necessary to dry the flask before calculating the mass, since the water particle in the flask will increase the volume of acid which will give change in the concentration of the acid.
And so it is 100% sure that the student will get wrong results.
To avoid such mistakes in the results, flasks must be dried up properly in an electric oven between 80°C to 90°C or by rinsing the flasks with a volatile solvent which can evaporate within few seconds and hence gives moisture free dried flasks.
To know more about Erlenmeyer flask,
https://brainly.com/question/23085975
#SPJ4
22. A
is a way of organizing data that is used to show
changes that occur in related variables.
Obar graph
O circle graph
Oline graph
O table
Answer:
line graphs
hope this helps :)
The usual soda pop can contains 360 mL. How many such cans could be filled from one 2.0 L bottle?
If there is a usual soda pop that contains 360 mL then the number of cans that can be filled from 2.0 L bottle are 5.5 pop cans.
Amount present in one soda can = 360 mL
Total amount present = 2.0 L
Convert 2.0 L into mL
1 L = 1000 mL
2.0 L = 2.0 x 1000 mL
= 2000 mL
So, the total amount = 2000 mL
Number of can using 360 mL = 1
The number of soda pop cans that can be filled using 2000 mL
= 2000 x (1/360)
= 2000/360 = 5.5 pop cans
To know more about number here
https://brainly.com/question/13354193
#SPJ1
Inside Earth, it is very hot and this source of heat called
Answer:
Geothermal energy
Explanation:
Hope that helps !!!
Cells communicate via chemical signals which bind to specialized molecules on the plasma membrane surface. these molecules are called _____.
Cells communicate via chemical signals which bind to specialized molecules on the plasma membrane surface. These molecules are called receptor proteins.
Receptor proteins are the transmembrane proteins. These are embedded in the cell membrane. They are responsive to specific ligand molecules which are extracellular. Chemical signals between cells are called as ligands. During cell signalling, when a ligand binds to its receptor, receptor transmits the signal to the cell and conforms the change. Receptor proteins enable the cells to recognize the hormones, nutrients, etc. Cell communication is necessary to perform cell functions. Cell signaling is a part of a complex cell communication process which involves three stages: Reception, Transduction and Response. Cells communicate using chemical signals which are receptor proteins produced by or secreted from the cell and released from the extracellular space.To learn more about cell signaling,
brainly.com/question/14470454
#SPJ1
Is the anser A b c or d
An object can accelerate only when there is a net force being applied.
As we can see in the image given in question that object 1 has forces with identical magnitude of forces being applied to opposite sides. The two opposite forces with identical magnitude will cancel the effect of each other on the object 1 and the net force on object 1 will be zero. And for this reason object 1 remains stationary.
In another case object 2 has forces with different magnitudes being applied to opposite sides. As the magnitude of forces applied on object 2 are different, these opposite forces after cancelation will have some net force acting on object 2. For this reason object 2 is accelerating. So, option a is correct i.e., An object can accelerate only when their is net force being applied.
To know more about Force refer to the link:
https://brainly.com/question/25239010
#SPJ1
When incorporated into a polypeptide chain not at the n or c terminus, _______ would make the charge of the polypeptide more positive.
When incorporated into a polypeptide chain not at the n or c terminus, Arginine would make the charge of the polypeptide more positive.
Do humans require arginine?Because arginine is an essential amino acid for young organisms' optimal growth and development, it must be provided in the diet. Arginine is a conditionally essential amino acid for adults, particularly in conditions such as trauma, burn injury, small-bowel resection, and renal failure.L-arginine is an amino acid that aids in protein synthesis in the body. It also causes nitric oxide to be released into the bloodstream. According to a 2016 review, nitric oxide acts to widen blood vessels in the bloodstream, which may help with certain circulatory conditions. The substance also stimulates insulin release in the body.Because L-arginine relaxes blood vessels, it may benefit men suffering from erectile dysfunction (ED) caused by poor blood flow. It may improve the efficacy of medications such as sildenafil (Viagra). Taking L-arginine with ED medication may cause blood pressure to drop too low.To learn more about Arginine refer to
https://brainly.com/question/24419453
#SPJ4
An object is traveling at a speed of 500.0 m/sec. How fast is that in km/hr?
Answer:
0.5km/hr
Explanation:
[tex]500.0 \div 1000[/tex]
this is because to get from n to KM you have to divide by 1000
What is the purpose of photoreceptors?
a. They focus the light coming into the eye.
b. They contract and relax to control the pupil.
c. They change light to electrical signals.
d. They receive light and turn it into an image.
The purpose of photoreceptors are they 'convert light to electrical signals'
Photoreceptors are the cells in the retina that respond to light and in that special cells in the eye's retina that are responsible for converting light into signals that are sent to the brain and photoreceptors give us our color vision and night vision and there are two types of photoreceptor cells rods and cones. when light hits the retina special cells called photoreceptors turn the light into electrical signals. these electrical signals travel from the retina through the optic nerve to the brain and then the brain turns the signals into the images called photoreceptors and the best example is human eye retina is a good example of photoreceptor protein
Know more about photoreceptors
https://brainly.com/question/3182822
#SPJ1
What is the molar mass of sodium aluminum sulfate decahydrate?
Answer:
the molar mass un the human body in a sodium is seman see inside the testicle there is little bits of chemical chemistry call sodium or codename seman and inside the seman thye dehydrate before they race so aluminum feeds them for preparation
Explanation: