Answer:
air
Explanation:
Vocal folds vibrate when excited by aerodynamic phenomena; they are not plucked like a guitar string. Air pressure from the lungs controls the open phase. The passing air column creates a trailing “Bernoulli effect,” which controls the close phase.
write a skeletal equation for the following reaction: An aqueous solution of barium nitrate and an aqueous solution of sodium sulfate are mixed together. Then balance the completed chemical equation.
Answer: skeletal equation : [tex]Ba(NO_3)_2(aq)+Na_2SO_4(aq)\rightarrow NaNO_3(aq)+BaSO_4(s)[/tex]
The products are sodium nitrate and barium sulphate.
balanced equation : [tex]Ba(NO_3)_2(aq)+Na_2SO_4(aq)\rightarrow 2NaNO_3(aq)+BaSO_4(s)[/tex]
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
The skeletal equation is:
[tex]Ba(NO_3)_2(aq)+Na_2SO_4(aq)\rightarrow NaNO_3(aq)+BaSO_4(s)[/tex]
The balanced chemical equation is:
[tex]Ba(NO_3)_2(aq)+Na_2SO_4(aq)\rightarrow 2NaNO_3(aq)+BaSO_4(s)[/tex]
The density of water is 1.0 mg
true or false ?
Answer:
True. the density of water is 1.0 mg
38 points!! >:D
Witch best describes what is required for sny sound wave to travel?
Empty space
Any medium
Solid
Liquid
Answer: which*
Explanation:
0.72-mol sample of is put into a 1.00-L vessel and heated. At equilibrium, the vessel contains 0.40 mol of and 0.40 mol of . Calculate the value of the equilibrium constant for the decomposition of to and at this temperature.
Answer:
0.50
Explanation:
A 0.72-mol sample of PCl₅ is put into a 1.00-L vessel and heated. At equilibrium, the vessel contains 0.40 mol of PCl₃(g) and 0.40 mol of Cl₂(g). Calculate the value of the equilibrium constant for the decomposition of PCl₅ to PCl₃ and Cl₂ at this temperature.
Step 1: Calculate the molar concentrations
[PCl₅]i = 0.72 mol/1.00 L = 0.72 M
[PCl₃]eq = 0.40 mol/1.00 L = 0.40 M
[Cl₂]eq = 0.40 mol/1.00 L = 0.40 M
Step 2: Make an ICE chart
PCl₅(g) ⇄ PCl₃(g) + Cl₂(g)
I 0.72 0 0
C -x +x +x
E 0.72-x x x
Step 3: Determine the value of x
Since [PCl₃]eq = [Cl₂]eq = 0.40 M, x = 0.40 M
Step 4: Determine the concentration of PCl₅ at equilibrium
[PCl₅]eq = 0.72-x = 0.72-0.40 = 0.32 M
Step 5: Calculate the equilibrium constant
Kc = [PCl₃] × [Cl₂] / [PCl₅]
Kc = 0.40 × 0.40 / 0.32 = 0.50
CH3OCH3 (ether) will dissolve in water because
Select one:
a. polar solutes dissolve in polar solvents.
b. ionic solutes dissolve in polar solvents.
c. polar solutes dissolve in non-polar solvents.
d. ionic solutes dissolve in non-polar solvents.
e. non-polar solutes dissolve in polar solvents.
Answer:
a. polar solutes dissolve in polar solvents.
Explanation:
Polarity is a phenomenon that has to do with the positive and negative electric (ionic) charges of a molecule. A molecule with distinct positive and electric charge is said to be POLAR. However, water is said to be a universal solvent because it dissolves more substances than any other solvent can.
This solvent property of water is a function of its POLARITY. Polar solutes dissolve in polar solvents. Hence, only polar solutes can dissolve in water (a polar solvent). Hence, in this case, CH3OCH3 (ether) will dissolve in water because it is a POLAR molecule/solute.
C(s)+H2(g)-> C2H6(g)
Explanation:
2 C(s) + 3 H2(g) = C2H6(g)
PLEASE HELP AND EXPLAIN!Calculate the energy required to heat 187.0 g of ammonia from 36.1 °C to 52.9 °C. Assume the specific heat capacity of ammonia under these conditions is
4.703.g. K. Round your answer to 3 significant digits.
Answer:
[tex]E=1.48x10^4J[/tex]
Explanation:
Hello!
In this case, since the energy implied in a heating process is computed by using the following equation:
[tex]E=mC(T_f-T_i)[/tex]
Whereas m is the mass, C the specific heat and T the temperature. In such a way, by plugging in the given mass, specific heat and temperatures, we obtain the following energy:
[tex]E=187.0g*4.703\frac{J}{g\°C} (52.9\°C-36.1\°C)\\\\E=1.48x10^4J[/tex]
Considering that the specific heat can by used by unit of °C or K because their difference is equivalent.
Regards!
What is exfoliation?
Answer:
Exfoliation involves the removal of the oldest dead skin cells on the skin's outermost surface. Exfoliation is involved in all facials, during microdermabrasion or chemical peels. Exfoliation can be achieved by mechanical or chemical means.
Explanation:
I did copy off internet!
:P
What determines the placement of an element on the Periodic table
Answer:
Elements are placed in order on the periodic table based on their atomic number, how many protons they have. In a neutral atom, the number of electrons will equal the number of protons, so we can easily determine electron number from atomic number.
Explanation:
Answer: Elements are placed in order on the periodic table based on their atomic number, how many protons they have. In a neutral atom, the number of electrons will equal the number of protons, so we can easily determine electron number from atomic number.
Explanation:
Give me 10 examples of entropy.
Answer:
A campfire is an example of entropy. The solid wood burns and becomes ash, smoke and gases, all of which spread energy outwards more easily than the solid fuel. Ice melting, salt or sugar dissolving, making popcorn and boiling water for tea are processes with increasing entropy in your kitchen.
Explanation:
If this helped you, the please mark me the brainliest.
Which statement describes the Arrhenius interpretation of acids and bases?
It has a wider range of applications than the Bronsted-Lowry interpretation.
It has a wider range of applications than the Lewis and Bronsted-Lowry interpretatio
It is used in situations that involve bases that do not produce hydroxide ions.
It is limited to situations that involve aqueous solutions or specific compounds.
Answer:
D. It is limited to situations that involve aqueous solutions or specific compounds.
Explanation:
An Arrhenius acid is a substance that increases the concentration of H3O or H+ when dissolved in water. An Arrhenius base is a substance that increases the concentration of OH- when dissolved in water. These definitions tell us that D is indeed limited to situations that involve aqueous solutions or specific compounds, as aqueous means something that's dissolved in water.
A is wrong because the Bronsted-Lowry interpretation has a wider range of applications. Bronsted-Lowry acids and bases don't even need to be aqueous, so it is not limited to just aqueous solutions. They include any substance that can donate or accept a H+.
B is wrong because A is wrong. A and B basically say the same thing, that the Arrhenius interpretation has a wider range of applications than the Bronsted-Lowry interpretation.
C is wrong because the definition of an Arrhenius base is any substance that increases the concentration of OH-, or hydroxide ions. C completely counters this statement.
Here's photo for proof incase you're doubtful of my answer & explanation. Please click the heart if it helped.
Answer:
Which statement describes the Arrhenius interpretation of acids and bases?
❌ A) It has a wider range of applications than the Bronsted-Lowry interpretation.
❌ B) It has a wider range of applications than the Lewis and Bronsted-Lowry interpretations.
❌ C) It is used in situations that involve bases that do not produce hydroxide ions.
✔️ D) It is limited to situations that involve aqueous solutions or specific compounds.I Took Question Test And Have Nice Day.
Which of the following atoms has the lowest first ionization energy: nitrogen, phosphorus, or arsenic?
Answer:
Arsenic
Explanation:
The atom that has the lowest first ionization energy is Arsenic.
The first ionization energy is the energy needed to remove the most loosely bound electron of an atom in the gas phase in the ground state.
Ionization energy generally deals with the measure of the readiness of an atom to lose an electron.
Generally, down a group from top to bottom, ionization energy decreases because of the increasing atomic radii and increasing shielding /screening effect on the outermost shell electrons hence the electrons are held less tightly to the nucleus. So, nitrogen, phosphorous and arsenic belongs to the same group and arsenic will have the least first ionization energy.In Ms. Baker’s science class, students filled two glass bottles with equal amounts of water and attached a balloon to the top of each bottle. The bottle on the right is heated on a hot plate to 80°C (176°F), while the bottle on the left is kept at room temperature, 21°C (70°F). After several minutes, the students observe that the balloon on the right inflates. (SC.5.P.9.1)
Which statement best explains the students’ observation?
The heat slows down a chemical change, producing the gas to fill in the balloon.
The heat speeds up a chemical change, producing a new substance.
The heat slows down a physical change, causing the water level to decrease.
The heat speeds up a physical change, causing the liquid to turn into a gas.
this is a science question but science doesnt show up
Answer:
D. The heat speeds up a physical change, causing the liquid to turn into a gas.
Explanation:
Someone please help me please
Answer:
point 2 and 4
Explanation:
because at those point temperature is constant
There are three states of matter: solid, liquid, and gas. is this true or false
Answer:
true
Explanation:
Solid, liquid and gases are the only three States of matter
Select the plant cell
Answer:
Plant cells are the basic unit of life in organisms of the kingdom Plantae. They are eukaryotic cells, which have a true nucleus along with specialized structures called organelles that carry out different functions. ... They also have a cell wall that provides structural support.
calculate the number of atom in 3mode of mg
Answer:
18.066 × 10²³ atoms
Explanation:
Given data:
Number of atoms of Mg = ?
Number of moles of Mg = 3 mol
Solution:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.
The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
3 mol × 6.022 × 10²³ atoms / 1mol
18.066 × 10²³ atoms
What is the percent composition of beryllium (Be) and oxide (O) in BeO? Round
your answer to the nearest whole percentage.
Answer:
[tex]\% Be=36\%\\\\\% O=64\%[/tex]
Explanation:
Hello!
In this case, since the percent compositions of Be and O in beryllium oxide are computed as shown below:
[tex]\% Be=\frac{m_{Be}}{M_{BeO}} *100\%\\\\\% O=\frac{m_{O}}{M_{BeO}} *100\%[/tex]
Since atomic masses are respectively 9.01 and 16.0 g/mol and the molar mass of the compound is 25.01 g/mol, the resulting percent compositions are:
[tex]\% Be=\frac{9.01}{25.01} *100\%=36\%\\\\\% O=\frac{16.0}{25.01} *100\%=64\%[/tex]
Best regards!
how much potassium bromide will form a saturated solution with 100 grams of water at 40 degrees celsius
Answer:
75.4 g.
Explanation:
Hello there!
In this case, since the solubility stands for the maximum amount of a solute that is completely dissolved in a specific amount of solvent, typically 100 g of water as the universal solvent; we need to take into account that the higher the temperature the higher the solubility for the most of the solids.
In such a way, since the solubility of potassium bromide at 20 °C is 65.3 g per 100 g of water, at 40 °C is 75.4 g per 100 g of water, proving the aforesaid. Therefore, 75.4 g of potassium bromide will form a saturated solution with 100 g of water at 40 °C.
Regards!
Compound 1 is a stronger acid than Compound 2 because the anion of Compound 1 is better stabilized by:'
Answer:
See explanation below
Explanation:
This question is incomplete because you are not putting the compounds you are talking here. However, I manage to find this question, and the first image below is the whole question.
Now, According to this question, we have the same compound. The difference between them is that compound 1 has the CO2H in axial direction, while compound 2 has it in equatorial direction.
As they are both, you can easily say that compound 1 is more acidic because the formed anion of CO2H, which is the CO2- is stabilized by hidrogen bonding that is formed between the OH and the CO2H. As you can see, in compound 1 they are both pointing at the same direction so an hydrogen bonding is easily formed, and this gives more stability to thw whole compound, thus, a better acid.
On the contrary, compound 2 has the CO2H in a not so suitable orientation, so the possible hydrogen bonding there cannot be formed, so the anion cannot be stabilized by this force, thus, is less acidic than compound 1.
Hope this helps
Covalent compounds are formed by the electrostatic attraction between ___ and __
A. Metals and non metals
B. Metals and metals
C. Non metals and non metals
D. Transition metals and metalliods.
Answer:
metals and non metals respectively.
Question 5 (1 point)
How many moles of oxygen gas is needed to produce 36 grams of water?
Answer:
1 Oxygen atom has a mass of 16 grams, thus diatomic oxygen weights twice as much- 32 grams. Hence 32 grams is needed.
which one of these would be the best example for kinetic energy
A roller coaster at the top of the tallest hill
A pendulum at the greatest height of it's swing
A drawn bowstring prior to being released
A marble about to reach the bottom of the slope
Answer:
a marble about to reach the bottom of the slope
Explanation:
hope this helps
compare earths compositional layers with its structural layer
Answer:
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties. The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle.
Which idea was supported by Aristarchus, Copernicus, and Galileo?
The planets have epicycles.
The planets revolve around the Sun.
The stars rotate around the Sun.
The center of the solar system is Earth.
Aristarchus, Copernicus, and Galileo all supported the idea that the planets revolve around the Sun.
The sun is the center of the solar system. All the early astronomers agreed to this fact.
Aristarchus placed the sun at the center of the solar system and postulated the fact that planets rotate in circular orbits around the Sun.
Copernicus in his work published in 1543 also placed the sun at the center of the solar system with Earth and other planets moving around it.
Using the Telescopes he made himself, Galileo also discovered that the sun is at the center of the solar system and planets orbited around the sun and not vice versa.
Therefore; Aristarchus, Copernicus, and Galileo all supported the idea that the planets revolve around the Sun.
Learn more; https://brainly.com/question/931651
Answer:B
Explanation:i said so
You have a vial containing 20.0g of oxygen gas. What is the percent composition of oxygen?
SELECT AN ANSWER
Cannot be determined without more information
83%
100%
90.8% oxygen
pleaseeeeeeee!!!!!!!!!
One way to account for the mass "lost" in a reaction that involves a gas would be to________.
Answer:
Place the experiments on a scale
Explanation:
If you place two of the same experiments on a scale, and cover one with a cup, the one with the cup will "lose" mass, while the other won't, due to the cup being a "containment field" I guess you could call it.
What type of electrons are involved in metallic bonding?
A.
Inner shell electrons
B.
Valence shell electrons
C.
D-orbital electrons
D.
D-orbital electrons
Two bottles of water are touching on a shelf in the refrigerator. The temperature for both is the same. This is known as which of the following?
A.
initial temperature
B.
final temperature
C.
thermal equilibrium
D.
thermal energy
Answer:
C
Explanation:
If there is no heat to transfer from one bottle to the other, then both bottles are at an equilibrium. This just means that they're both on the same thermal energy level.
I NEED HELP. This is about science
Answer:
Independent variable
Explanation: