what do you think will happen if there is no coal.

Answers

Answer 1

Answer:

If coal and petroleum will get exhausted it will be very difficult for us to transport because most vehicles depends on petroleum, Transport on Earth will became complicated, and if coal will get exhausted we will lose an unique fossil fuel. Coal is used in various domestic and industrial purposes.


Related Questions

Calculate the number of moles in 15.5g of CaSO4.5H2O

Answers

Answer:

No. of moles = 0.0685

Explanation:

Given mass, m = 15.5g

We need to find the number of moles in 15.5 g of CaSO₄.5H2O

First, we find the mass of CaSO₄.5H2O.

M = (1×40)+(1×32)+(4×16)+(5×18)

M = 226 g/mol

We know that,

Number of moles = given mass/molar mass

[tex]n=\dfrac{15.5\ g}{226\ g/mol}\\\\n=0.0685\ \text{mol}[/tex]

Hence, there are 0.0685 moles in 15.5 g of CaSO₄.5H2O.

Examine the diagram of the cell cycle. Which label identifies the stage in which the DNA is copied and the cell grows? W X Y Z

Answers

Explanation:

w is the stage in which dna is copied and cell grows.

Answer:

w

Explanation:

Gaseous butane CH3CH22CH3 will react with gaseous oxygen O2 to produce gaseous carbon dioxide CO2 and gaseous water H2O. Suppose 0.58 g of butane is mixed with 0.874 g of oxygen. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to 3 significant digits.

Answers

Answer:

0.378 g of H₂₂O can be produced.

Explanation:

The combustion reaction is:

2CH₃(CH₂)₂CH₃  +  13O₂  →  8CO₂  +  10H₂O

We convert the mass of reactants to moles:

0.58 g . 1mol / 58.1g = 0.00998 moles of butane

0.874 g . 1mol / 32g = 0.0273 moles of O₂

Oxygen is the limiting reactant. Look at stoichiometry.

2 moles of butane need 13 moles of oxygen to react

Then, 0.00998 moles of gas may react to (0.00998 . 13) / 2 = 0.06487 moles of oyxgen. I only have 0.0273 moles, so i do not have enough oxygen to complete the reaction.

Let's find out the product.

13 moles of oyxgen can produce 10 moles of water.

Then 0.0273 moles of O₂ may produce (0.0273 . 10)/13 =  0.021 moles

We convert to mass  →  0.021 mol . 18g /1mol = 0.378 g

Starting in the mouth, food follows a pathway through the digestive system. Describe how the mouth is involved in both mechanical and chemical digestion. (At least one paragraph)

Answers

Answer:

The mouth uses both mechanical and chemical digestion. Mechanical digestion involves physically breaking down the food into smaller pieces (using the jaw/teeth). However, chemical digestion then takes over and starts breaking down the food into simpler nutrients that can be used by the cells using saliva, which is naturally made within the mouth.

Hope this helps you! Have a great day! :D

A sample of compound A (a clear, colorless gas) is analyzed and found to contain 4.27g carbon and 5.69g oxygen. A sample of compound B (also a clear, colorless gas) is analyzed and found to contain 5.19g carbon and 13.84g oxygen. Are these data an example of the law of definite proportions, the law of multiple proportions, or neither? What do these data tell you about substances A and B?

Answers

Answer:

law of multiple proportions

Explanation:

The law of multiple proportions states that, if two elements A and B, combine to form more than one chemical compound. Then the various masses of one element A, which combine separately with a fixed mass of element B are in  simple multiple ratio.

We can see that the ratio of oxygen that combines with carbon in the two compounds( A and B) is 1:2. This demonstrates the law of multiple proportions.

The substances A and B must be CO and CO2 respectively.

Disaccharides are held together by a glycosidic bond. Hydrolysis of the disaccharide requires_____

Answers

Answer:

monosaccharides and glycosidic, I think

Explanation:

Answer:

pasagottt po plss

Explanation:

edi wow

In a chemical equation, the new substance that is produced from a chemical reaction is called __________.

Answers

Answer:

products

Explanation:

yeah the answer is product

The answer is products.


A chemical reaction is the process in which atoms present in the starting substances rearrange to give new chemical combinations present in the substances formed by the reaction. These starting substances of a chemical reaction are called the reactants, and the new substances that result are called the products.

• Saved
7. A mining company find a deposit of metal. Based on the other intensive properties it could be iron (7.9 g/cm), lead
(11.3 g/cmº), or nickel (8.9 g/cm.).
A 15 cm sample of it weighs 134g. Which metalis it most likely to be?

Answers

Answer:

Nickel

Explanation:

Given data:

Density of iron = 7.9 g/cm³

Density of lead = 11.3 g/cm³

Density of nickel = 8.9 g/cm³

Mass of sample = 134 g

Volume of sample = 15 cm³

Which metal it is = ?

Solution:

First of all we will calculate the density of sample and then match it with the density of given metals.

Formula:

d = m/v

by putting values,

d = 134 g/ 15 cm³

d = 8.9 g/cm³

The weighted sample is nickel metal.

Ultraviolet radiation and radiation of shorter wavelengths can damage biological molecules because they carry enough energy to break bonds within the molecules. A carbon-sulfur bond requires 272 kJ/mol to break. What is the longest wavelength of radiation with enough energy to break carbon-sulfur bonds

Answers

Answer:

439.7nm

Explanation:

Energy of a quantum can be calculated using below formula

E=hv...........eqn(1)

But v=λ/ c .........eqn(2)

If we substitute eqn(2) into eqn(1) we have

E= hc/(λ)

Where E= energy

h= Plank's constant= 6.62607004 × 10-34 m2 kg / s

c= speed of light

c= 2.998 × 10^8 m/s

λ= wavelength= ?

But the energy was given in Kj , it must be converted to Kj/ photon for unit consistency.

Energy E= 272 kJ/mol × 1mol/6.02× 10^23

Energy= 451.83× 10^-24 Kj/ photon

E= hc/(λ)...........eqn(1)

If we make λ subject of the formula

λ= hc/E

Then substitute the values we have

λ= [(6.626 × 10^-34) × (2.998 × 10^8)]/451.83× 10^-24

λ=(0.00043965) × (1Kj/1000J) × (10^9nm/1m)

λ=439.7nm

Hence, the longest wavelength of radiation with enough energy to break carbon-sulfur bonds is 439.7nm

Which of the following forces would take the longest amount of time to change the surface of the Earth?

A. volcano
B. earthquake
C. tsunami
D. seafloor spreading


HELPP

Answers

I’m thinking volcano cuz lava doesn’t move fast..-

Answer: D

Explanation:

Cause If you head to the middle of the ocean and dive down, down, down to where the Earth's plates meet, you might find an undersea mountain split by a deep trench. It's called a mid-ocean ridge. Up through such trenches, brand-new molten rock is bubbling. That's the newest rock on Earth! How does the ocean floor make room for all that new rock? Simply by pushing the old rock aside. In fact, the ocean floor is actually spreading right at this minute, out away from the deep trenches where new rock is being formed. The oldest rock can be found farthest away from the trenches, right up near the continents. It's all part of a process called seafloor spreading. It's been going on for millions of years (at the rate of a few centimeters per year), but scientists are just now getting to know more about it. In fact, because evidence of seafloor spreading was first discovered in the 1940s and 50s, your great-grandparents may have never heard of it!

help me please i do not understand

Answers

Answer:

1 g/cm3

Explanation:

The formula for density is mass/volume

The mass is 100 g and the volume is 100 cm3

100 g/100 cm3=1 g/cm3

A 5 mL sample of an unknown liquid is placed into a 250 mL flask that has had all of the air removed. The pressure measured in the flask is found to be 34.5kPa. In a seperate trial the student puts 214 mL of the same liquid into the same flask at the same conditions. What will the pressure measure (in kPa) in the second trial

Answers

Answer:

See explanation below

Explanation:

In this case, we can use the Boyle's law. Assuming that the temperature of both trial remains constant, then:

P₁V₁ = P₂V₂    (1)

You should note that this expression is usable when you are dealing with gases. However, we can treat this unknown liquid as a gas, because all the air on the flask is removed, and we can assume that the liquid can behave like an ideal gas.

So using the above expression, we can solve for P₂:

P₂ = P₁V₁ / V₂    (2)

In this case, we already have the values of presures and volume, so replacing in this expression:

P₂ = 34.5 * 5 / 214

P₂ = 0.806 kPa

This should be the pressure of the liquid.

Hope this helps

Here’s the answers I wasn’t asking a question hehe!Subtract the mass of the filter paper (0.27g) from the mass of the paper and copper (0.98 g). Record the difference in the data table as the amount of copper.

You already converted mass to moles for the reactants. Now convert mass to moles for the product, copper


all for edge

ANSWERS!!!

Answers

Do you still need help with this?

The increase in electro negativity when moving left to right on the periodic table can be explained by what?

Answers

Answer: Decrease in size

Explanation:

Electronegativity is defined as the property of an element to attract a shared pair of electron towards itself.

On moving across a period from left to right,   the size of an atom decreases because the electrons get added to the same shell and the nuclear charge keeps on increasing. Thus the electrons get more tightly held by the nucleus.

As, the size of an element decreases, the valence electrons come near to the nucleus. So, the attraction between the nucleus and the shared pair of electrons increases. Thus electronegativity increases.

Pls help me I’m having a hard day pls answer these?

Answers

Answer:the first one is D second one is A and the third one is A   :D

Explanation:

HURRY PLEASE
If 12 grams of sodium reacts with 16 grams of chlorine, how much sodium chloride is Formed?
A. 4 g
B. 12 g
C. 28 g
D. 30 g

Answers

Answer:

6.576 g NaCl

Explanation:

2Na + Cl2 --> 2 NaCl

Step 1: Find out moles of Na and Cl to determine the limiting reactant:

moles Na = 12/23 = 0.52 moles Na

moles Cl2 = 16/71=0.225 moles Cl2

ratio Na:Cl is 2.3:1 so Cl is the limiting reactant.

Step 2: How many moles of NaCl are formed:

moles NaCl = moles Cl2 x (1 mol NaCl/2 moles Cl2) = 0.225/2 = 0.1125 moles NaCl

Step 3:

mass NaCl = moles NaCl x MM NaCl = 0.1125 x 58.45 = 6.576 g NaCl

Help pls!!!!!!!!!!!!!!!!!!!!!!!!!

Answers

Chief Keef - Love Sosa

6:C
7:B
8:A
Hope this helps

Would you consider an aquifer a renewable resource? Why or why not?

Answers

Answer:

an aquifer is a renewable resource

Explanation:

Aquifers are defined as the groundwater found deep in the layers of rocks.

An aquifer is considered as a renewable resource because groundwater is renewed over time. Aquifers are water resources and follow hydrological cycle through which it can renew itself.

Some of the deep aquifers are considered as  nonrenewable resource because it toll hundreds of years to accumulate.

Hence, the correct answer is yes an aquifer is a renewable resource except some deep aquifers.

Predict whether each of the following ionic compounds is soluble in water: a.) LiCl d.) K2 ____________________ ____________________ b.) AgCl c.) BaCO3 ____________________ e.) Fe(NO3 ____________________ )3 ____________________ O

Answers

Answer:

See answer below

Explanation:

a.) Lithium Chloride, LiCl is soluble in water.

b.) Silver Chloride, AgCl is insoluble in water.

c.) Barium Carbonate, BaCO3 is insoluble in water.

d.)Potassium, K2 is soluble in water.

e.) Iron (III) Nitrate Fe(NO3)3 is soluble in water.

All nitrates (NO3) are soluble in water.Alkali metals are soluble in water.Chlorides are soluble in water with the exception of AgCl and a few others.Carbonates are generally insoluble in water.

A student is measuring the mass of a two metal cylinders. The following data is collected. The actual mass of each cylinder is given. Answer the following questions. Metal Cylinder A 12.4 grams Actual mass of metal cylinder A 12.7 g Metal Cylinder B 75.4 grams Actual mass of metal cylinder B 75.1 g a. What is the absolute error for the measurement of metal cylinders A and B

Answers

Answer:

Absolute error in measurement of A = 0.3

Absolute error in measurement of B = 0.3

Explanation:

Absolute error is a measure of the amount of error in a measurement i.e. a measure of how far away a measurement is from a true value or an indication of the uncertainty in a measurement.

The Absolute Error is the difference between the actual and measured value. In formula, the absolute error, Δx is given as:

Δx = |xi – x|,

Where:  xi is the measurement, x is the true value,

| | indicates that only absolute values are taken

In the measurements by the student in the question:

Metal Cylinder A

measured value = 12.4 grams

actual mass of metal cylinder A = 12.7 g

Using the absolute error formula; Δx = |xi – x|

Absolute error in measurement of A = |12.4 - 12.7| = 0.3

Metal Cylinder B

measured value = 75.4 grams

actual mass of metal cylinder B = 75.1 g

Using the absolute error formula; Δx = |xi – x|

Absolute error in measurement of B = |75.4 - 75.1| = 0.3

Acetylene gas is often used in welding torches because of the very high heat produced when it reacts with oxygen gas, producing carbon dioxide gas and water vapor. Calculate the moles of water produced by the reaction of of oxygen.

Answers

Answer:

one mole of oxygen will produce [tex]0.4[/tex] moles of water

Explanation:

The balanced chemical reaction is as follows -

2 C2H2 + 5 O2 --> 4 CO2 + 2 H2O

As we can see in this reaction

5 mole of oxygen (on the reactant side) will produce 2 mole of water (on the product side)

Hence, one mole of oxygen will produce [tex]\frac{2}{5} =0.4[/tex] moles of water

Why are acids called proton donors?

Answers

Acids are substances that can donate H+ ions to bases. Since a hydrogen atom is a proton and one electron, technically an H+ ion is just a proton. So an acid is a "proton donor", and a base is a "proton acceptor". The reaction between an acid and base is essentially a proton transfer.
The relationship between acids and bases is more aggressive than the donor/acceptor terminology implies. Bases don't passively "accept" protons; they rip hydrogen ions from acids. Acids don't "donate" hydrogen ions; they surrender them.

Don’t skip please!!! I need help

Answers

Further explanation

Given

Atomic symbol

Required

Atomic composition

Solution

Atomic number = number of protons = number of electrons

Mass Number (A) is the sum of protons and neutrons

Number of protons and Number of Neutrons  in nucleus

Number of electrons in the shell

From the picture:

protons = 3

neutrons = 4

electrons = 3

atomic number = protons = electrons = 3

mass number = protons + neutrons = 3+4 = 7

what causes a massive star wars a turn into a super red giant

Answers

Answer:

The core turns its hydrogen to helium and stops nuclear fusion which causes the outer shells of hydrogen to collapse.

Explanation:

This results in higher temperature and pressure which in turn causes the outer shells to expand and cool as a red giant.

onsider the iodination of salicylamide by sodium iodide and sodium hypochlorite via an electrophilic aromatic substitution to form iodo-salicylamide. Reaction scheme illustrating the iodination of salicylamide by sodium iodide and sodium hypochlorite via an electrophilic aromatic substitution to form iodo-salicylamide. Calculate the molar masses of the reactants and product. Report molar masses to 1 decimal place.

Answers

Answer:

The answer is "[tex]\bold{263 \ and \ 137.1 \frac{g}{ mol}}[/tex]".  

Explanation:

The chemical formula for Salicylamide: [tex]C_7H_7NO_2[/tex]

[tex]\to (12.011 \ \frac{g}{mol} \times 7)+(1.008 \ \frac{g}{mol} \times 7)+(14.0067 \frac{g}{mol} \times 1)+(15.999 \frac{g}{mol} \times 2) \\\\\to (84.077 \ \frac{g}{mol} )+(7.056 \ \frac{g}{mol} )+(14.0067 \frac{g}{mol})+(31.998 \frac{g}{mol} ) \\\\\to (84.077 \ \frac{g}{mol} )+(7.056 \ \frac{g}{mol} )+(14.0067 \frac{g}{mol})+(31.998 \frac{g}{mol} ) \\\\ =137.1377 \approx 137.1\ \frac{g}{mol}[/tex]

The chemical formula of Iodosalicylamide:[tex]C_7H_6INO_2[/tex]

[tex]\to (12.011\frac{g}{mol}\times 7)+(1.008\frac{g}{mol}\times 6)+(126.904\frac{g}{mol}\times 1)+(14.0067\frac{g}{mol}\times 1)+(15.999\frac{g}{mol}\times 2) \\\\\to (84.077\frac{g}{mol})+(6.048\frac{g}{mol})+(126.904\frac{g}{mol})+(14.0067\frac{g}{mol})+(31.998\frac{g}{mol}) \\\\=263.0337 \approx 263.0\ \frac{g}{mol}[/tex]

Draw all four products obtained when 2-ethyl-3-methyl-1,3-cyclohexadiene is treated with HBr at room temperature and show the mechanism of their formation. For the mechanism, include lone pairs and charges in your answer. Do not draw out any hydrogen explicitly. Do not use abbreviations such as Me or Ph.

Answers

Answer:

See explanation below

Explanation:

In this case we have reaction of addition. In this case a diene reacting with an acid as HBr. This reaction is known as Hydrohalogenation, and, as we have a diene, this kind of reaction can be done as 1,4 addition. Which means that the reaction will be undergoing with an adition in the carbon 1, and carbon 4.

At room temperature we can expect that this reaction can be done in thermodynamic conditions, Now, as the problem states that is forming 4 products, we can expect products of a 1,2 addition too. This product can be formed if the reaction is taking place in the most stable carbocation, and then, by resonance, we can expect the 1,4 product too.

Now, the HBr can be attacked by the double bond of the first position, giving two possible products or by the double bond of the third position giving the other two products. These products are all possible, obviously the most stable will be the major of all of them, but the other three are perfectly possible. One product is formed without doing much, and the other by resonance. Same happens with the other double bond.

In the picture below, you have the mechanism for all the 4 products.

Hope this helps

Which of these is smallest?
cells
atoms
matter
elements

Answers

Answer:

atoms

Explanation:

i hope that help you

Answer:

atoms

Explanation:

What contains more hydrogen atoms, 1.0 mole of H20 or 1.0 moles of НЗО?
H20
H30
both are equal
cannot be determined
(please show ur work)​

Answers

a mole of an element refers to 6.02e23 atoms so they would have the same amount of atoms

Predict: During positron emission, a protonis transformed into a neutronand a positron, which is emitted.The positron will fly through space until it encounters an electron.How will positron emissionaffect the atomic number and mass number of the atom

Answers

Answer:

See explanation

Explanation:

A positron is also called a positive electron. It results from the transformation of a proton into a neutron.

When a nucleus decays by positron emission, the atomic mass of both the parent and daughter nuclei remain the same but the atomic number of the daughter nucleus decreases by 1 compared to that of the parent nucleus. The daughter nucleus is now found one place to the left of the parent nucleus in the periodic table.

This leads to an increase in the Neutron/Proton ratio.

What type of equation is this?
AlCl3 + NaOH → Al(OH)3 + NaCL
double
single
synthesis
decomp
combustion

Answers

Double. I guess, I’m sorry.
Other Questions
Find mGeometry help pls A large bottle of juice contains 500 milliliters of juice. A small bottle contains 50% as much juice as the large bottle. How many milliliters of juice are in the small bottle? Convert 26 4/5 to an improper fraction Which is a perfect square?6^16^26^36^5 Compare the Moon phases from Feb 16 through Feb 20. a claim is a statement one believes to be true true or false the european plain is known for what No quiero ir contigo a la fiesta ___ con Anselmo.a. admirob. musulmana c. edificiod. sino Find each percent. 5 is what percent of 15? 1.50x - 7.55 = -15.05 what is the answer What subject pronouns would you use to talk to...X'(1 point per question)Opt11. your teachers?x Opt12. your best friend?X Opt13. the principal of your school?xoOpt14. your classmates if you are in Spain? Since sole proprietorships have __________, personal assets may be used to pay business debts.A.limited resourcesB.unlimited liabilityC.earnings potentialD.several investorsPlease select the best answer from the choices providedABCD What is the subject of this poem (the poison tree) TRUE OR FALSE:a. "Theme is one word that can summarize the whole plot" b. " Theme is NOT directly stated and they must be inferred" LAB REPORT Lab: Charles lawI dont know how to do this someone pls help Im so behind Im crying a student built a fire using coal. the coal started to burn. which statement best describes the energy changes that occurred. A. the chemical energy stored in the coal changed to thermal energy and light energy B. the thermal energy stored in the coal changed to light energy and chemical energy. C. the light energy and thermal energy stored in the coal changed to mechanical energy. D. the light energy and thermal energy stored in the coal changed to chemical energy Your building plan for your restaurant includes one men's and women's restroom. The city inspector lets you kno that you must have at least 400 square feet per bathroom. If your building is a total 4,000 square feet, how many square feet are left for the development other nonbathroom areas? 13. Which colony was considered the Crown Jewel of the British Empire?O A. IndiaOB. South AfricaO C. KenyaO D. Bangladesh Which of the following best describes the process of protein synthesis?Group of answer choicesAmino acids are translated from mRNA, then mRNA is transcribed back into DNADNA is transcribed into mRNA, then mRNA leaves the nucleus to go to the ribosomes for translationmRNA stays in the nucleus, which is where DNA is transcribed into amino acids. The amino acid then go to the ribosome to build proteins.DNA leaves the nucleus through transcription and goes to the ribosome, where it is translated into amino acids Why is a cartoon an effective accompaniment to the selection?