Answer:
mas
Explanation:
mass is the amount of space something occupies.
is
5
The specific heat of copper is 0.385 J/g
°C. How much thermal energy is required
to increase the temperature of a 20g
sample of copper from 20°C to 50°C?
Q = m CAT
A 154 )
B 231 )
C 308 )
D 385 )
Answer:
Required energy Q = 231 J
Explanation:
Given:
Specific heat of copper C = 0.385 J/g°C
Mass m = 20 g
ΔT = (50 - 20)°C = 30 °C
Find:
Required energy
Computation:
Q = mCΔT
Q = 20(0.385)(30)
Required energy Q = 231 J
This is from P.E , que some please help me
Answer:
I know that 2 is called a foul I dont know about 1 though
After watching this video, Blake, a student in an introductory physics class, makes the following claim: The acceleration and velocity of the glider are both momentarily zero when the glider changes direction. The velocity of the glider must be zero for an instant when the glider changes direction. Because the velocity is zero, the acceleration must also be zero. 1. Respond to Blake's claim. Which parts, if any do you agree with, and which parts do you not agree with
Answer:
Please see below as the answer is self- explanatory.
Explanation:
Any time that an object changes direction (from leftward to rightwward, or from upward to downward) the velocity must be zero just for one instant, when is on the verge of changing the direction.This is needed because velocity changes as a continuous function of time, so it needs to cross the t-axis when passing from positive to negative or vice versa.However, the claim that in the moment that velocity is zero, the acceleration is also zero, is false.Due to acceleration is the rate of change of velocity, and velocity is a vector, this means at any time there is a change of direction, there is an acceleration that is non-zero.For example, when an object that has been thrown upward, reaches to its maximum height, just one instant before starting to fall, the velocity becomes zero, but the acceleration (which causes the object to fall) is non-zero, due to it's the acceleration due to gravity.Tasks
Task 2 - Compare and contrast the use of D'Alembert's principle with
the principle of conservation of energy to solve an
engineering problem
A motor vehicle having a mass of 800 kg is at rest on an incline of 1 in 8 when the
brakes are released. The vehicle travels 30 m down the incline against a constant
frictional resistance to motion of 100 N where it reaches the bottom of the slope.
a) Using the principle of conservation of energy, calculate the velocity of the
vehicle at the bottom of the incline.
b) Using an alternative method that does not involve a consideration of energy,
cacluate the velocity of the vehicle at the bottom of the incline.
c) Discuss the merits of the two methods you have used for parts a) and b) of
this question. Justify the use of an energy method for these types of
problems.
Answer:
NE DIYON INGILIZ MISIN SEN
Hearing rattles from a snake, you make two rapid displacements of magnitude 1.8 m and 2.4m. Draw sketches, roughly to scale, to show how your two displacements might add to give the following resultant of magnitudes.
a. 4.2 m
b. 0.6 m
c. 3.2 m
Answer:
The answer is a 4.2m
Explanation:
Given data
Please see attached the rough drawing for your reference.
From the drawing, you ran 18m west and 2.4m south
The displacement is
= 1.8+2.4
=4.2m
2. A force of 10 N is applied to an object which accelerates at a rate of 2m/s2. What is the mass
of the object?
(10 Points)
10 kg
5 kg
2 kg
20 kg
Help me out please. It’d be greatly appreciated
Answer:
Option D
2Na + Cl₂ —> 2NaCl
Explanation:
We'll begin by stating the law of conservation of matter.
The law of conservation of matter states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.
For an equation to comply with the law of conservation of matter, the number of atoms of each element must be the same on both side of the equation. This simply means that the equation must be balanced!
NOTE: An unbalanced equation simply means matter has been created or destroyed.
Now, we shall determine which equation is balanced. This can be obtained as follow:
For Option A
Na + Cl₂ —> 2NaCl
Reactant:
Na = 1
Cl = 2
Product:
Na = 2
Cl = 2
Thus, the equation is not balanced!
For Option B
2Na + 2Cl₂ —> 2NaCl
Reactant:
Na = 2
Cl = 4
Product:
Na = 2
Cl = 2
Thus, the equation is not balanced!
For Option C
2Na + Cl₂ —> NaCl
Reactant:
Na = 2
Cl = 2
Product:
Na = 1
Cl = 1
Thus, the equation is not balanced!
For Option D
2Na + Cl₂ —> 2NaCl
Reactant:
Na = 2
Cl = 2
Product:
Na = 2
Cl = 2
Thus, the equation is balanced!
From the above illustrations, only option D has a balanced equation. Thus, option D illustrate the law of conservation of matter.
A ball is dropped from a building taking 3sec to fall to the ground. Calculate:
Speed when falling to the ground
The height of the building
Answer:
Vf = 29.4 m/s
h = 44.1 m
Explanation:
Data:
Initial Velocity (Vo) = 0 m/sGravity (g) = 9.8 m/s²Time (t) = 3 sFinal Velocity (Vf) = ?Height (h) = ?==================================================================
Final Velocity
Use formula:
Vf = g * tReplace:
Vf = 9.8 m/s² * 3sMultiply:
Vf = 29.4 m/s==================================================================
Height
Use formula:
[tex]\boxed{h=\frac{g*(t)^{2}}{2}}[/tex]Replace:
[tex]\boxed{h=\frac{9.8\frac{m}{s^{2}}*(3s)^{2}}{2}}[/tex]Multiply time squared:
[tex]\boxed{h=\frac{9.8\frac{m}{s^{2}}*9s^{2}}{2}}[/tex]Simplify the s², and multiply in the numerator:
[tex]\boxed{h=\frac{88.2m}{2}}[/tex]It divides:
[tex]\boxed{h=44.1\ m}[/tex]What is the velocity when falling to the ground?
The final velocity is 29.4 meters per seconds.
How high is the building?
The height of the building is 44.1 meters.
How does Doppler ultrasound technology differ from ultrasound technology
that does not use the Doppler effect?
A. Doppler ultrasound collects data from moving objects.
B. Other ultrasound technology creates images, but Doppler
ultrasound does not.
C. Doppler ultrasound creates images, but other ultrasound
technology does not.
D. Doppler ultrasound is based on absorption of sound, and other
ultrasound technology is based on reflection.
Answer:
A. Doppler ultrasound collects data from moving objects
Explanation:
Did the test !!
Answer:A. Doppler ultrasound collects data from moving objects.
Explanation: just got it right
on my test
What makes electromagnets useful for sorting metals in recycling centers?
O A. The current can be turned on to pick up items containing all
metals and turned off to drop them.
O B. The current can be turned off to pick up items containing all
metals and turned off to drop them.
O C. The current can be turned on to pick up items containing iron and
turned off to drop them.
D. The current can be turned off to pick up items containing iron and
turned on to drop them.
C
It is right because I took this and I got this answer correct
The planet Mars is host to five functioning spacecraft, three in orbit about the planet and two on the surface of the planet. Thanks to those spacecraft, we know that the planet Mars has a mass that is 0.11 times that of Earth and a radius that is 0.53 times that of Earth. The acceleration of an object in free-fall near the surface of Mars is most nearly what in terms of the local value of g on Earth
Answer:
0.392
Explanation:
Mm = 0.11Me
Rm = 0.53Re
g = GM / r^2
G = 6.67 * 10^-11
gmars = (G * 0.11Me) / (0.53Re)^2
Recall:
gearth = GMe /Re^2
Hence, gmars in terms of gearth equals
gmars = gearth * (0.11 / 0.53^2)
gmars = gearth * 0.3915984
gmars = 0.392gearth
what are the precautions to be taken while performing a rectangular glass prism experiment
Answer:
PRECAUTIONS
-The refracting faces of the glass prism should be smooth, transparent and without any air bubble or broken edge. ...
-Use a sharp pencil to draw boundary of the prism and rays of light.
-The alpins should have sharp tip and should be fixed exactly vertical to the plane of the paper.
Explanation:
Please give thanks to all my answers and please mark as brilliant and please follow me
Thomas knows that many machines transform electrical energy into other forms of energy
Answer:
Only the car transforms electrical energy into more than one form of energy.
Explanation:
The motion of the car is mechanical energy but it can also transform into another energy witch is electrical energy
Explain two reasons why astronomers are continually building larger and larger telescopes. Explain two reasons why astronomers are continually building larger and larger telescopes. Larger telescope mirrors have a larger surface area and can therefore collect more light, which makes faint objects bright enough to detect. Also, larger telescope mirrors produce more scattering of light due to diffraction, which contributes to better angular resolution. Larger telescope mirrors have a larger surface area and can therefore collect more light, which contributes to better angular resolution. Also, larger telescope mirrors produce more scattering of light due to diffraction, which makes faint objects bright enough to detect. Larger telescope mirrors have a larger surface area and can therefore collect more light, which contributes to better angular resolution. Also, larger telescope mirrors produce less scattering of light due to diffraction, which makes faint objects bright enough to detect. Larger telescope mirrors have a larger surface area and can therefore collect more light, which makes faint objects bright enough to detect. Also, larger telescope mirrors produce less scattering of light due to diffraction, which contributes to better angular resolution.
Answer:
* Larger mirrors collect more light and therefore fainter and more distant objects can have enough intensity to be detected
* arger mirrors decreases the angle of dispersion giving a better resolution of the bodies
Explanation:
Refracting telescopes get bigger every day for two main reasons.
* Larger mirrors collect more light and therefore fainter and more distant objects can have enough intensity to be detected
* the diffraction process for circular apertures is given by
θ = 1.22 λ / D
where d is the diameter of the mirror, therefore having larger mirrors decreases the angle of dispersion giving a better resolution of the bodies
A spacecraft and a staellite are at diametrically opposite position in the same circular orbit of altitude 500 km above the earth. As it passes through point A, the spacecraft fires its engine for a short interval of time to increase its speed and enter an elliptical orbit. Knowing that the spacecraft returns to A at the same time the satellite reaches A after completing one and a half orbits, determine (a) the increase in speed required, (b) the periodic time for the elliptic orbit
Answer:
Hello the diagram related to your question is attached below
answer: a) 851 m/s
b) 8506.1 secs
Explanation:
calculate the periodic time of the satellite using the equation below
t = [tex]\frac{2\pi }{R} \sqrt{\frac{(R+h)^{3} }{g} }[/tex] -- ( 1 )
where ; R = 6370 km
h = 500 km
g = 9.81 m/s^2
input given values into equation 1
t = 5670.75 secs
next calculate the periodic time taken by the space craft
a) determine the increase in speed
V = v - [tex]\sqrt{\frac{gR^2}{R + h} }[/tex]
where ; v = 8463 m/s , R = 6370 km, h = 500 km
V = 851 m/s
b) Determine the periodic time for the elliptic orbit
τ = [tex]\frac{3t}{2}[/tex]
= [tex]\frac{3*5670.76}{2}[/tex] = 8506.1 secs
attached below is the remaining part of the detailed solution
A body moves on a coordinate line such that it has a position sequalsf(t)equalstsquaredminus4tplus3on the interval 0less than or equalstless than or equals7,with s in meters and t in seconds.a. Find the body's displacement and average velocity for the given time interval.b. Find the body's speed and acceleration at the endpoints of the interval.c. When, if ever, during the interval does the body change direction?
Answer:
A) Δf = - 49 m, B) v (7) = -56 m / s, a = - 8 m / s², C) t = 0.866 s
Explanation:
A) In this exercise ask to find the displacement and the average velocity, give the function of the movement
f (t) = - 4t² +3
and the range of motion 0≤ t ≤ 7
the displacement is
for t = 0
f (0) = 3
for t = 7 s
f (7) = - 4 7² +3
f (7) = -46 m
the total displacement is
Δf = f (7) - f (0)
Δf = -46 - 3
Δf = - 49 m
the average speed is defined as the displacement between the time interval
v = Df / Dt
v = -49 / 7
v = - 7 m / s
B) the speed and acceleration of the end points of the motion
the speed of defined by
v = [tex]\frac{dx}{dt}[/tex]
in this case
v = [tex]\frac{df}{dt}[/tex]
v = -8t
let's calculate
v (7) = -8 7
v (7) = -56 m / s
acceleration is defined by
a = [tex]\frac{dv}{dt}[/tex]
a = - 8 m / s²
acceleration is constant throughout the movement
C) the point where the direction changes.
This point is a point where the position goes from positive to negative, the point f = 0
0 = -4t² +3
t = √¾
t = 0.866 s
how can you decrease the numbers
of calories you consume
Answer: by eating less of the recommendEd servings
Explanation:
A skydiver is using wind to land on a target that is 120 m away horizontally. The skydiver starts from a height of 70 m and is falling vertically at a constant velocity of 7.0 m/s downward with their parachute open (terminal velocity). A horizontal gust of wind helps push them towards the target. What must be their total speed if they want to just hit their target
Answer:
13.9 m/s.
Explanation:
Since the vertical velocity of the skydiver is constant at v = 7.0 m/s, we find the time, t it takes him to drop from a height of h = 70 m.
So, distance = velocity time
h = vt
t = h/v = 70 m/7 m/s = 10 s
This is also the time it takes him to move horizontally a distance of d = 120 m to the target.
So, his horizontal velocity is v' = distance/time = d/t = 120m/10 s = 12 m/s.
Since both vertical and horizontal velocities are perpendicular, we add them vectorially to obtain the skydivers total speed, V.
So, V = √(v² + v'²)
= √((7.0 m/s)² + (12.0 m/s)'²)
= √(49 m²/s² + 144 m²/s²)
= √(193 m²/s²)
= 13.9 m/s.
The direction of this velocity is Ф = tan⁻¹(v/v')
= tan⁻¹(7 m/s/12 m/s)
= tan⁻¹(0.5833)
= 30.3°
Which type of electromagnetic radiation is most likely to cause sunburn?
A. Ultraviolet
B. Visible light
C. Infrared
D. X-rays
Question 18 of 25
Which type of reaction is shown in this energy diagram?
Energy
Products
Activation
Energy
Reoctants
to
ti
Time
A. Endothermic, because the products are lower in energy
B. Exothermic, because the reactants are lower in energy
C. Endothermic, because the reactants are lower in energy
D. Exothermic, because the products are lower in energy
Answer:
Endothermic, because the reactants are lower in energy (C)
Explanation:
From the graph, you can see the energy of the products is higher than the energy of the reactants. If you recall that when the enthalpy change Eproducts is gretater than Ereactants, the reaction is said to be endothermic.
You are walking on a moving walkway in the airport. The length of the walkway is 59.1 m. If your velocity relative to the walkway is 2.35 m/s, and the walkway moves with a velocity of 1.85 m/s, how long will it take you to reach the other end of the walkway
Answer:
14.1seconds approx
Explanation:
Given data
Distance= 59.1m
Your velocity= 2.35m/s
Walkway velocity= 1.85m/s
Total velocity= 2.35+1.85= 4.2m/s
We know that
Velocity= distance/time
time= distance/velocity
substitute
time= 59.1/4.2
time= 14.07
time=14.1seconds approx
Hence the time is 14.1seconds approx
What simple machine can best be described as "a simple machine that uses an inclined plane wrapped around a rod"?
a wedge
a screw
a wheel and axle
a lever
Answer:
It is a screw.
Explanation:
A plane wishes to fly due north to an airport which is 205 km away. The plane can fly at a speed in still air of 220 km/h. A wind of 43 km/h blows from east to west.
a. In which direction,relative to north, should the plane head to reach it’s destination?
b. How long does this take?
Answer:
nique ta mama
Explanation:
What do you call the height of a wave?
a. wavelength
b. frequency
c. amplitude
d. resonance
Answer:
amplitude is the answer
Violet pulls a rake horizontally on a frictionless driveway with a net force of 2.0 N for 5.0 m.
How much kinetic energy does the rake gain?
Answer:
10 J.
Explanation:
Given that,
Net force acting on the rake, F = 2 N
Distance moved by the rake, d = 5 m
We need to find the kinetic energy gained by the rake. We know that,
Kinetic energy = work done
So,
K = F×d
K = 2 N × 5 m
K = 10 J
So, 10 J of kinetic energy is gained by the rake.
Violet pulls a rake horizontally on a frictionless driveway with a net force of 2.0 N for 5.0 m.
How much kinetic energy does the rake gain?
Answer: 10 J
Q4. What is the speed of light in a block of glass that
has an Index of refraction of 1.11?
Iron has a specific heat of o.45 J/g °C. Removing -1.16 E 2 J of energy lowered the temperature of iron from 89 °C to 26.41 °C. What was the mass of the iron?
Answer:
m = 4.11 grams
Explanation:
Given that,
The specific heat of Iron, c = 0.45 J/g°C
Heat removed, [tex]Q=1.16\times 10^2\ J[/tex]
Initial temperature, [tex]T_i=89^{\circ} C[/tex]
Final temperature, [tex]T_f=26.41^{\circ} C[/tex]
We need to find the mass of the iron. We know that the heat removed in terms of specific heat is given by :
[tex]Q=mc\Delta T\\\\m=\dfrac{Q}{c\Delta T}\\\\m=\dfrac{-1.16\times 10^2}{0.45\times (26.41-89)}\\\\m=4.11\ g[/tex]
So, the mass of the iron is 4.11 grams.
A certain brand of hotdog cooker works by applying a potential difference of 144 V across opposite ends of a hot dog and allowing it to cook by means of the thermal energy produced. The current is 10.5 A, and the energy required to cook one hot dog is 60.6 kJ. If the rate at which energy is supplied is unchanged, how long will it take to cook three hot dogs simultaneously
Answer:
120.237 seconds
Explanation:
Given that:
V = 144 V
I = 10.5 A
H = 60.6 kJ
Using the formula:
H = I²RT
From H = I²RT; making T the subject, we have:
[tex]T = \dfrac{H}{I^2R}[/tex]
where;
[tex]R = \dfrac{V}{I}[/tex]
∴
[tex]T = \dfrac{H}{V \times I}[/tex]
[tex]T = \dfrac{60.6 \times 10^3 }{144 \times 10.5}[/tex]
T = 40.079
[tex]T_{neq} = 3T[/tex]
[tex]T_{neq} =3 \times 40.079[/tex]
[tex]\mathbf{T_{neq} =120.237 \ sec}[/tex]
Based on the data, which statement describes the most reliable way to
encode and transmit data and tells why?
A. Digital waves are more reliable because they are less likely to
change when copied.
B. Analog waves are more reliable because they include a range of
values like the original.
C. Analog waves are more reliable because they are less likely to
change when copied.
D. Digital waves are more reliable because they are slightly different
from the original.
Answer:it’s A. right for ape x
Explanation:
Based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
What is a wave?A wave is a periodic distortion capable of traveling through a suitable media (either air or water).
The waves can be classified according to their direction into transversal and perpendicular.In conclusion, based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
Learn more on waves here:
https://brainly.com/question/15663649
#SPJ2
A 10,000 g body falls from a height of 20 m. Calculate the potential energy when it is at a height of 10 m
Answer:
Ep = 980 J
Explanation:
First, grams must be converted to kilograms. So, we must divide the value of the mass, by 1000.
[tex]\boxed{\frac{10000}{1000}=\boxed{10kg}}[/tex] ---------- Converted to kg.==================================================================
Data:
Mass (m) = 10 kgGravity (g) = 9.8 m/s²Height (h) = 10 mPotential Energy (Ep) = ?Use formula:
Ep = m * g * hReplace:
Ep = 10 kg * 9.8 m/s² * 10 mMultiply operations, with units:
Ep = 980 JWhat is the potential energy?
The potential energy is 980 Joules.