Which object has the magnetic domains shown in the image?
A steel paper clip near a magnet
B. A piece of wood near a magnet
C. A piece of wood, not near a magnet
D. A steel paper clip, not near a magnet​

The back end of the rod moved [tex]1.90\ \mathrm{mm}$[/tex] in this time interval.

Given:

Young's modulus, Y = [tex]20 \times 10^{10}\;N/m^{2}[/tex]

Steel density, [tex]\rho = 7.86 \times 10^{3}\;kg/m^{3}[/tex]

Length of the rod, L = 80 cm = 0.800m

The speed of the wave in the rod is

[tex]$v = \sqrt{\frac{Y}{\rho}} = \sqrt{\frac{20\times 10^{10}\ \mathrm{N/m^2}}{7.86\times 10^3\ \mathrm{kg/m^3}}} = 5044\ \mathrm{m/s}$[/tex]

Hence the time taken by the wave to travel the end of the rod is,

[tex]$t=\frac{L}{v} = \frac{0.800\ \mathrm{m}}{5044\ \mathrm{m/s}} = 1.58\times 10^{-4}\ \mathrm{s}$[/tex]

The velocity of the rod is [tex]$v_r = 12.0\ \mathrm{m/s}$[/tex]

The other end will keep moving after the front end hits the wall until the wave reaches the other end, given the period determined by the above problem.

As a result, before the wave reaches the end of the rod, it has traveled a distance of

[tex]$\Delta L = v_r t = (12.0\ \mathrm{m/s}) (1.58\times\ \mathrm{s}) = 1.90\times 10^{-3}\ \mathrm{m} = 1.90\ \mathrm{mm}$[/tex]

Hence, the [tex]1.90\ \mathrm{mm}$[/tex] at the back end of the rod moved in this time interval.

Young's Modulus is a measurement of the mechanical characteristics of linear elastic solids like rods, wires, and other similar objects. It is also known as the Elastic Modulus or Tensile Modulus. Young's modulus is the most often used measurement of a material's elastic properties; other measurements include bulk modulus and shear modulus. This is so that it can inform us about a material's tensile elasticity (ability to deform along an axis).

The relationship between stress (force per unit area) and strain is described by Young's modulus (proportional deformation in an object). Thomas Young, a British scientist, is honored with the name of the Young's modulus. When a certain load is applied to a solid object, it deforms.

To know more about Youngs Modulus visit:

https://brainly.com/question/14458238

#SPJ4

The conductor after disconnected from the ground is positively charged after you remove the rubber rod.

Electrostatic induction is the change in a material's electric charge under the influence of another nearby object that has electric charge. For Electrostatic induction to occur a charged particle is held close (without touching it ) to a uncharged material that is grounded .

So, when the negatively charged rubber rod is brought closer to the grounded conductor which is neutral, a positive charge is induced on the conductor's side which is closer to the rubber rod and a negative charge on the other side which is close to the ground. So the negative charge starts escaping through ground. As it is disconnected from the ground, the conductor becomes positively charged.  

Therefore, the conductor is positively charged after you remove the rubber rod.

To know more about Electrostatic induction

https://brainly.com/question/15823104

#SPJ1

The acceleration is -0.4 m/s² if the car is driving at 33 m/s and slows down to 29 m/s over a period of 10 seconds.

It is defined as the rate of change in linear velocity with respect to time. It is also known as linear acceleration.

As we know,

The acceleration can be found using the formula:

a = Δv/t

Here a is the acceleration

Δv is the change in linear velocity

t is the time

Δv = 29 - 33

Δv = -4 m/s

t = 10 seconds

a = -4/10

a = -0.4 m/s²

Thus, the acceleration is -0.4 m/s² if the car is driving at 33 m/s and slows down to 29 m/s over a period of 10 seconds.

Learn more about angular acceleration here:

brainly.com/question/408236

#SPJ4

How a Inkjet printer uses electrical charges and tiny particles to print the image is discussed below.

We have a Inkjet printer which uses electrical charges and heat to fuse tiny plastic particles (called toner) to the paper.

The sufficiency or deficiency of electrons in a body leads to the development of electric charge in a body. Its unit is Coulomb. It can be either Positive or Negative in nature.

According to the question -

The statement mentioned in the question is true. The inkjet printers use electrical charges and heat to fuse tiny plastic particles (called toner) to the paper. Printers attract toner particles (with the help of electric charge) to a transfer roller. Toner particles are pressed onto a piece of paper, while heat and pressure from the fuser unit permanently fix the image onto the page.

To solve more questions on Inkjet Printers, visit the link below-

https://brainly.com/question/5039703?

#SPJ4

The relative humidity is thirty-five percent is the data in which the sling psychrometer will record and is denoted as option C.

This is defined as the amount of water vapor which is present in air and is usually expressed as a percentage of the amount needed for saturation at the same temperature.

The instrument known as psychrometer is commonly used by scientist to measure the relative humidity of a given area and it does this by taking both a wet-bulb and a dry-bulb temperature reading which is then used to calculate the relative humidity of the given area.

Thus is done using computation tools or the use of psychrometric chart in other to read the results for the required accuracy needed which therefore makes it the most appropriate choice in this scenario.

Read more about Humidity here https://brainly.com/question/5369085

#SPJ1

The magnitude of the electric field is 3.65×10^5N/C directed radially outward.

R (radius of the solid sphere) = (10cm)( 1m /100cm) = 0.1m

[tex]Q\;(\text{total charge of the solid sphere})=(26\;\mathrm{\mu C})\left(\dfrac{1\;\mathrm{C}}{10^6\;\mathrm{\mu C}} \right)=\textcolor{#ff9c8c}{26\times 10^{-6}\;\mathrm{C}}[/tex]

Since [tex]{r=0.1\;\mathrm{m} < R}[/tex], we can use Equation [tex]E&=\dfrac{Qr}{4\pi \epsilon_0 R^3}\tag{5}[/tex] to find the magnitude of the electric field:

Substitute numerical values:

[tex]E&=\dfrac{(26\times 10^{-6})(0.1)}{4\pi (8.8542\times 10^{-12})(0.4)^3}\\ &={3.65\times 10^5\;\mathrm{N/C}\;\text{directed radially outward}}}[/tex]

Magnitude generally refers to distance or quantity. In comparison to motion, Magnitude defines the size of an entity or its speed when moving.

Learn more about magnitude here:

https://brainly.com/question/15681399

#SPJ4

If we compare the parallax of a nearby object with an object farther away then we observe that the closer objects have a larger parallax as compared to farther objects.

Parallax refers to the apparent distance of an object and happens in everyday situations.

On a linear surface, when an object is seen from a different viewpoint from a particular distance, it exhibits parallax.

It also occurs due to the change in the viewpoint of an observer.

Parallax is represented by the formula d = p1 where 'd' is parsecs and 'p' is the parallax angle which is calculated in arc seconds.

If you need to learn more about parallax click here:

https://brainly.com/question/14315796

#SPJ4

Answer:

Florence is often named as the birthplace of the Renaissance. The early writers and artists of the period sprung from this city in the northern hills of Italy. As a center for the European wool trade, the political power of the city rested primarily in the hands of the wealthy merchants who dominated the industry

Explanation:

Answer:

Florence is often named as the birthplace of the Renaissance. The early writers and artists of the period sprung from this city in the northern hills of Italy. As a center for the European wool trade, the political power of the city rested primarily in the hands of the wealthy merchants who dominated the industry

Explanation:

Answer:

momentum

Explanation:

The net impulse delivered to an object always causes a change in the object's momentum. Hence, option (B) is correct.

The given problem is based on the concept of net impulse. The magnitude of force acting on any object for very short interval of time is known as impulse. In the given problem, the transfer of impulse can be explained by the impulse - momentum theorem.

[tex]F \times t = \Delta P\\\\I= \Delta P[/tex]

Here, I is the impulse.

Thus, we can conclude that the net impulse delivered to an object always causes a change in the object's momentum. Hence, option (B) is correct.

Learn more about the impulse-momentum theorem here:

https://brainly.com/question/24744548

The equation of motion of the standing wave, y(x, t) = 2•A•sin(k•x + π/2)•cos(w•t - π/2), indicates that it is still true that the nodes are one half the wavelength apart

Therefore;

The equation describing the standing wave formed by the two waves is y(x, t) = 2•A•sin(k•x + π/2)•cos(w•t - π/2)

A standing wave is formed when two waves that have equal amplitude and frequency and moving in opposite directions, are combined.

A standing wave can be formed by a wave and its reflection, resulting in a wave where there is no propagation of particles beyond the vibration region.

The fundamental frequency of a standing wave consists of two nodes and an antinode.

The wavelength is the distance between two peaks of one wave, such that two nodes are formed within the span of a wavelength, which makes the distance between nodes being half the wavelength of the wave.

Therefore;

It is still true that the nodes are one half the wavelength apart.

Learn more about standing waves in physics here:

https://brainly.com/question/15517720

#SPJ1

Answer:

0.25 m/s

Explanation:

Acceleration cannot be negative.

The force on the bottom of the beaker is 8.31 N.

To calculate the force on the bottom of the beaker we are using the formula,

F = PA

Here we are given,

A = area of the beaker.

To calculate the force we have to calculate the pressure P first.

To calculate the pressure P we are using the formula,

P= ρgh

ρ=  density of water.

g= the acceleration due to gravity.

h=the height of the water.

Now we put the values in the formula, we get,

P= ρgh

Or, P= (1000)×(9.8)×(0.30)

Or, P= 2940 Pa.

From the above calculation we can say that the pressure P= 2940 Pa.

Now we put the values in the force formula,

F=PA

Or, F=  2940×[tex]\pi r^{2}[/tex]

Or, F = 2940×π×(0.03)²

Or, F= 8.31N

From the above calculation we can conclude that, The force on the bottom of the beaker is 8.31 N.

Learn more about Force:

https://brainly.com/question/12970081

#SPJ4

Answer:

The distance is now 4d

Explanation:

Mechanical Force

According to the second Newton's law, the net force exerted by an external agent on an object of mass m is:

F = m.a

Where a is the acceleration of the object.

The acceleration can be calculated by solving for a:

[tex]\displaystyle a=\frac{F}{m}[/tex]

Once we know the acceleration, we can calculate the distance traveled by the block as follows:

[tex]\displaystyle d = vo.t+\frac{at^2}{2}[/tex]

If the block starts from rest, vo=0:

[tex]\displaystyle d = \frac{at^2}{2}[/tex]

Substituting the value of the acceleration:

[tex]\displaystyle d = \frac{\frac{F}{m}t^2}{2}[/tex]

Simplifying:

[tex]\displaystyle d = \frac{Ft^2}{2m}[/tex]

When a force F'=4F is applied and assuming the mass is the same, the new acceleration is:

[tex]\displaystyle a'=\frac{4F}{m}[/tex]

And the distance is now:

[tex]\displaystyle d' = \frac{4Ft^2}{2m}[/tex]

Dividing d'/d:

[tex]\displaystyle \frac{d' }{d}=\frac{\frac{4Ft^2}{2m}}{\frac{Ft^2}{2m}}[/tex]

Simplifying:

[tex]\displaystyle \frac{d' }{d}=4[/tex]

Thus:

d' = 4d

The distance is now 4d

The wavelength of the displacement amplitudes is 124cm.

Frequency is the distance between two pinnacles (or box) of a wave and is consequently estimated in meters. Because of waves coming in all shapes and sizes, the prefix related with meters can change decisively from km for radio waves, micrometers for noticeable light (albeit frequently given in nanometers), to picometers for gamma beams. Albeit X-beams have numerous useful applications, utilizing them requires alert since openness can cause visual impairment, disease and different wounds. Frequency and recurrence are conversely related so that more drawn out waves have lower frequencies, and more limited waves have higher frequencies.

Learn more about wavelength, refer:

https://brainly.com/question/16234238

#SPJ4

Answer: Wave frequency can be measured by counting the number of crests (high points) of waves that pass the fixed point in 1 second or some other time period. The higher the number is, the greater the frequency of the waves. The SI unit for wave frequency is the hertz ( Hz ), where 1 hertz equals 1 wave passing a fixed point in 1 second.

Explanation:

Answer:

When something is heated, its atoms vibrate. If one end of a metal bar is heated, the atoms at that end vibrate more than the atoms at the cold end. The vibration spreads along the bar from atom to atom. ... Metals are good conductors of heat.

Explanation:

Answer: friction has no role to play in this case. because friction usually occurs between to parts which come in contacts. examples (a)our joints in the human body (b)two mechanical parts (shafts).

Explanation:

However what this topic relates to is gravity. The pebble and paper both weigh one gram, but have different density this is the sole reason why if both are drop from same height the pebble would reach the ground faster than the paper because it is more denser. unlike the paper with a lesser density which would take a longer time to reach the ground.

Answer:

Explanation:

∑Fx = 0

F1 + F2 = 0

-12 + 2 = -10

force acting against the block is Fx = 10N to the right.

Force = mass * acceleration

where acceleration = 2.0 meters per second.

                       force = 10 N

                      mass = ??

plugin values into the formula:

10 = mass * 2.0

mass = 10 / 2.0

mass = 5 kg

mass on the block = 5kg.

Explanation:

If acceleration points in the same direction as the velocity, the object will be speeding up. The acceleration points in the same direction as the velocity if the car is speeding up, and in the opposite direction if the car is slowing down.

Answer:

See answers below

Explanation:

Rate of runner   7 km/hr

Bird   =  28 km/ hr

  TIME bird flies to finish line     7.6 km / 28 km/hr  

         the runner covers distance in this time :

                    7.6 / 28  * 7   km   = 1.9 km

                        this leaves    7.6 - 1.9 km = 5.7 km   to the finish

           .....  the bird turns around

              now the two have a closing speed of 28 + 7 = 35 km/hr to cover

                 this   5.7 remaining km

                       time to meet =  5.7 km / 35 km/hr = .16285 hr

                         so the bird flies at 28 km/ hr for this remaining time

                                       = 4.56 km     added to the original 7.6 km before turning around = 12.16 km

Total time for the runner to finish   7.6 km / 7 km/hr = 1.086 hr

   the bird is flying at 28 km/hr for this entire time = 30. 4 km

Answer: A room lined with soft materials that absorb sound.

Explanation:

Just did it :))

What must be known to determine the direction of the magnetic force on a charge? Check all that apply.

B- the amount of the charge

E- the strength of the magnetic field

To determine the direction of the magnetic force :

A) The type of the charge.

C) The direction of the magnetic field.

D) The velocity of the charge.

To determine the direction of the magnetic force on a charge is the type of the charge, the direction of the magnetic field, and the velocity of the charge.

The magnetic force, attraction or repulsion that emerges between electrically charged particles since of their movement.

It is the fundamental constrain dependable for such impacts as the activity of electric engines and the fascination of magnets for press.

Thus, the correct answer is A, C and D.

Learn more about "Mangetic Force":

https://brainly.com/question/14321088?referrer=searchResults

Answer:

C. 2.5 N

Explanation:

The sum of downwards moments equals sum of moments upwards

Downwards moments

Moments= Force*distance

               = [10/100 * 2 ] +[20/100*4]

               =[0.1*2] +[0.2*4]

               =[0.2+0.8]

               = 1.0 N

Equate this answer to upward force ;

1.0 N = 0.4 *U

1/0.4 =U

2.5 N =U

According to the question as you walk to the grocery store you walk 800m north, 600m east, and 200m south at a speed of 1m/s. Then your velocity will be ( V = 0.5m/sec )

Velocity is the directional pace of an object in movement as an indication of its price of alternate in function as located from a specific body of reference and as measured by a particular widespread of time.

To find the velocity follow the following steps:

Displacement of 800m north, 600m east, and 200m south from the Cartesian coordination is given as 600[tex]\sqrt{2}[/tex]

Velocity = displacement / time

Therefore time = distance / speed

Time = 800 + 600 + 200 / 1

Time = 1600s

Therefore velocity = 600[tex]\sqrt{2}[/tex] / 1600

Velocity = 0.5m/sec

A Cartesian coordinate gadget in a plane is a coordinate system that specifies each point uniquely by a pair of numerical coordinates, which are the signed distances to the factor from constant perpendicular oriented strains, measured in the equal unit of duration.

Learn more about Velocity here brainly.com/question/500702

#SPJ4

Answer:

F = 9.81 [N]

Explanation:

To solve this problem we must use Newton's third le which tells us that the sum of forces on a body that remains static must be equal to one resulting from these forces in the opposite direction.

Let's perform a summation of forces on the vertical axis-y to determine the normal force N.

∑F = 0 (axis-y)

[tex]N - m*g = 0[/tex]

where:

m = mass = 4 [kg]

g = gravity acceleration = 9.81 [m/s²]

[tex]N - (4*9.81)=0\\N = 39.24 [N][/tex]

Now we know that the frictional force can be calculated using the following equation.

f = μ*N

where:

f = friction force [N]

μ = friction coefficient = 0.25

N = normal force = 39.24 [N]

Now replacing:

[tex]f = 0.25*39.24\\f = 9.81[N][/tex]

Then we perform a sum of forces on the X-axis equal to zero. This sum of forces allows us to determine the minimum force to be able to move the object in a horizontal direction.

∑F = 0 (axis-x)

[tex]F-f=0\\F-9.81=0\\F= 9.81[N][/tex]

If the coefficient was smaller, a smaller force (F) would be needed to start the movement, this can be easily seen by replacing the value of 0.25, by smaller values, such as 0.1 or 0.05.

If the coefficient were larger, a larger force would be needed.