Answer:
Transformers use “electrical steel” alloys. ... From 1% to 6.5% silicon is added, as well as a small amount (up to 0.5%) of manganese and aluminum to reduce brittleness in alloys with higher percentages of silicon. Electrical steels are formulated and processed to have low hysteresis and eddy-current losses.
Explanation:
The eddy currents consume energy and heat the iron core. The designers of the electrical machines and transformers laminate the core with thin sheets of iron coated with a thin oxide layer.
To reduce Eddy current loss in the transformer, the iron core is constructed of laminated silicon steel and has a unique insulated coating.
What is used to laminate the core of a transformer?Instead of employing a solid iron block, this can be accomplished by laminating the core, which is constructed from a collection of metal plates that are adhered together.
With less current flow, efficiency loss, and heat waste, this has the desired effect of raising electrical resistance inside the core. Low hysteresis and eddy-current losses are achieved by the formulation and processing of electrical steels.
The iron core is heated by the eddy currents, which use energy. The core of electrical devices and transformers is laminated with thin sheets of iron covered in a thin oxide layer by the designers.
Therefore, Transformers use alloys known as “electrical steel.” To lessen brittleness in alloys with larger percentages of silicon, between 1% and 6.5% silicon is added, along with a tiny amount (up to 0.5%) of manganese and aluminum.
Learn more about core here:
https://brainly.com/question/15374524
#SPJ2
Why doesn't the earth block out the light between the sun and the moon during a normal month
Answer:
Explanation:
terms involved in s=ut+1/2at^2
Explanation:
The terms involved in S = ut + 1/2at²
S = displacement
u = initial velocity
a = acceleration
t = time.
Hope it will help :)
Answer:
the distance traveled or displacement (s) of an object using its initial velocity (u), acceleration (a), and time (t) traveled.
Help plz!! I’ll give brainlist!! I need it fast plz
Answer:
1.A
2.E
3.C
4.i think A
Explanation:
An inclined plane is set at an angle of 29 degrees above horizontalWhat is the acceleration of a 420 g block of ice sliding down the inclined plane? Assume no friction
The net force parallel to the plane is
∑ F = m g sin(29°) = m a
where
m = mass of the block
g = magnitude of the acceleration due to gravity, 9.8 m/s²
a = mag. of acceleration of the block
where we take the direction of the block's sliding down the plane to be positive. Then
a = g sin(29°) ≈ 4.8 m/s²
If a missile is launched from the equator toward an object in the Northern Hemisphere, should it be aimed to the left, to the right, or directly at its target? Why?
Answer:
Must be aimed to the left
Explanation:
Coriolis effect deflects wind or any moving item which has no contact with earth and has substantial distance to cover and moving at a substantial altitude. Coriolis effect deflectd the object to the right in the northern hemisphere. Therefore, missile must be aimed to the left, to nullify the coriollis effect.
How many newtons is the force of gravity g , acting on an apple with mass m = 200 g?
Answer:
Mass of the apple is 200g or 0.2 kg
Force acting on it will be,
Force= Mass× acceleration due to gravity
Force= 0.2×9.8 Newton= 1.96 Newton
Answer:
2 N
Explanation:
The question requires you to express the weight of the apple into Newton
1 kg = 10 N
200g = 200/1000 = 0.2 kg
1 kg = 10 N
0.2 kg = ?
0.2 * 10 = 2 N
Pls help I think it's pretty easy
Electromagnetic waves transfer energy and are produced by _____.
3. Electrons are the only part of an atom that can be transferred between materials. True or
False?
Answer:
True
Explanation:
Electrons can be transferred between materials as in chemical reactions solid substances lose electrons while other elements gain electrons to balance the electrons in reaction.It occurs by conduction,polarization and friction.
Two positive charges 12×10^-6C and 8×10^-6 are 10cm apart. Find the workdone in bringing them 4cm together
Answer:
W = 5.76 J
Explanation:
Given that,
Charge 1, [tex]q_1=12\times 10^{-6}\ C[/tex]
Charge 2, [tex]q_2=8\times 10^{-6}\ C[/tex]
The distance between charges is 10 cm.
Initial distance = 10 cm = 0.1 m
Final distance = 10 cm - 4 cm = 6 cm = 0.06 m
We need to find the work done in bringing the 4 cm together.
We know that,
Work done = change in kinetic energy
[tex]W=kq_1q_2(\dfrac{1}{r_2}-\dfrac{1}{r_1})\\\\\text{Put all the values}\\\\W=9\times 10^9\times 12\times 10^{-6}\times 8\times 10^{-6}(\dfrac{1}{0.06}-\dfrac{1}{0.1})\\\\W=5.76\ J[/tex]
So, the required work done is 5.76 J.
Force=mass x acceleration which of newtons laws does this best describe
If a 2000 N force is used to raise a piano at a rate of 10 m/s2, what is the mass of the piano?
Answer:
To solve this problem we will apply the principle of conservation of energy for which we have that the potential energy on a body, is equivalent to the work done on it at the given point. Therefore we will have the following equality
At the same time we know that work is equivalent to the Force applied over a given distance, so,
The potential energy is equivalent to the product between mass, gravity and height. Recall that the product of mass and gravity is equivalent to weight (The same given in the statement)
Equating,
Then,
Replacing,
Therefore the force needed to lift the piano is 600N
Explanation:
HOPE THIS HELPS!!!
The value of acceleration due to gravity is less at the top of Mount Everest then that in the terai reason, why?
Answer:
The value of acceleration due to gravity is greater in terai than in mountain. In terai region the radius of earth is less as it lies close to the centre of the earth. Thus, the value of g is more in terai region.
All sound waves need a(n) _______________________________________ to travel through. 4. _____________________ and ___________________ can be used to describe a sound wave.
Answer:
Material medium
compressions and rarefactions
Explanation:
A sound wave is an example of a mechanical wave. All mechanical waves require a material medium for propagation. The medium for the propagation of sound is air. This is the reason why, if you cover your mouth, it will be difficult for another person to hear whatever you are saying.
Sound is also a longitudinal wave. Longitudinal waves are described in terms of compressions and rarefactions. Compressions refer to areas where air molecules crowd together while rarefactions refer to areas where the air molecules spread out.
Which of the following best explains why the noble gases are less likely to chemically
bond with other elements?
A They are all non-metals. |
B They are all rare elements.
C They all have a full outer shell of electrons.
D They have the highest atomic number in the row.
Answer:
a
Explanation:
Write a sentence on how these words are used in real life situations
1. Average Velocity
2. Instantaneous Velocity
3. Acceleration
Answer:
Explanation:
You can approach an expression for the instantaneous velocity at any point on the path by taking the limit as the time interval gets smaller and smaller. Such a limiting process is called a derivative and the instantaneous velocity can be defined as.#3
For the special case of straight line motion in the x direction, the average velocity takes the form: If the beginning and ending velocities for this motion are known, and the acceleration is constant, the average velocity can also be expressed as For this special case, these expressions give the same result. Example for non-constant acceleration#1
A element source has a decayed constant of 13.6pico per second. Calculate the half life of this element.
Answer:
5.1 x 10¹⁰s
Explanation:
Given parameters:
Decay constant = 13.6 x 10⁻¹²/s
Unknown:
Half life of the element = ?
Solution:
From the decay constant, we can find the half-life of this radioactive element.
Half-life = [tex]\frac{0.693}{decay constant}[/tex]
Half-life = [tex]\frac{0.693}{13.6 x 10^{-12} }[/tex] = 5.1 x 10¹⁰s
How would the gravitational force between the earth and the moon change if the moon had twice the mass?
Explanation: The moon's gravity, combined with the waltz of Earth and the moon around their center of mass, forces the oceans into an oval shape, with two simultaneous high tides. ... If the moon were half its mass, then the ocean tides would have been correspondingly smaller and imparted less energy to it.
A test pilot flies with an acceleration of 5 g. What is his acceleration in meters
per second squared?
A. 5 m/s2
B. 9.8 m/s2
C. 49 m/s2
D. 14.8 m/s2
Answer:
C. 49 m/s^2
Explanation:
1 G = 9.81 m/s^2
so 5 * 9.81 = 49.05
or C. 49 m/s^2
Question 2 (2 points)
Which of the following is a true statement about mass and weight? (2 points)
a
Mass is a measure of how much matter an object has, while weight is a measure of
how much space the object takes up.
Mass will not change based on location, while weight will change based on
gravitational pull
b
Mass is a measure of a gravitational pull on an object, while weight is a measure of
how much matter is an object has,
Mass is proportional to the force of gravity, while weight is proportional to the
amount of mass,
d
Answer:
B. Mass will not change based on location, while weight will change based on gravitational pull.
Answer:
B
Explanation:
took the test
3. What is a manometer used to determine?
A the difference between two densities
B the difference between two forces
C the difference between two heights
D the difference between two pressures
Answer:
D the difference between two pressures
Explanation:
A manometer is a device used to measure the difference between the pressure in a place. Manometer is solely used to determine gas pressure.
The device compares gas pressure to atmospheric pressure at any given point. It measures pressure against a fixed reference or with respect to a differential pressure in a place. The column of liquid is the medium it uses to measure the pressure differences. Pressure is the force exerted per unit area.a boy pulls his toy on a smooth horizontal surface with a rope inclined at 60° to the horizontal if the effective Force pulling the toy along the horizontal surface is 5-newton calculate the tension in the rope
Answer:
The tension in the rope is 10 N
Explanation:
The Force Vector
Like all vectors, the force has a magnitude and direction. Vectors can be decomposed into two perpendicular components on both axes.
The tension in the rope (F) can be calculated by using vector decomposition as follows.
The figure included below shows a force F which horizontal component is known to have a value of Fx= 5 Nw. The angle formed by the force and its horizontal component is 60°.
We can use the trigonometric ratio called the cosine to find the magnitude of F as follows:
[tex]\displaystyle \cos 60^\circ = \frac{5}{F}[/tex]
Solving for F:
[tex]\displaystyle F = \frac{5}{\cos 60^\circ}[/tex]
[tex]\displaystyle F = \frac{5}{\frac{1}{2}}[/tex]
Thus, F = 10 N
The tension in the rope is 10 N
Charlie graduated with a bachelor’s degree in construction management. As he aspires to work in his dad’s construction firm, which educational institute does Charlie need to enroll in for professional certifications in construction?
Charlie needs to enroll himself in the BLANK for various professional certifications, and a master’s degree in construction science from the best university.
Answer:
He needs to enroll himself in CMMA. This company help young students obtain a well future in Construction Science.
Tom skis at an average speed of 5 m/s. How many mins does it take for Tom to ski 4050 m.
Medium is water. The wavelength is 4.75 m and the frequency is 600 Hz. Calculate the speed of the wave.
Answer:
126.32m/s
Explanation:
The formula for calculating the speed of wave is expressed as:
Speed of wave = frequency/wavelength
Given
Wavelength = 4.75m
Frequency = 600Hz
Required
Speed of the wave
Substitute the given value into the formula
Speed = 600/4.75
Speed = 126.32m/s
Hence the speed of the wave is 126.32m/s
How much is the velocity of a body when it travels 600m in 5 minutes?( with the full process)
Will anyone please help me solve this physics Problem?
Answer:
I. Clockwise moment = 150 Nm
II. Anticlockwise moment = 400 Nm
III. 200 N
III. The anticlockwise moment.
Explanation:
From the question given above, we can obtain the answers to the questions as follow:
I. Determination of the clockwise moment.
Distance (d) = 1.5 m
Force (F) = 100 N
Clockwise Moment =?
Moment = Force × distance.
Clockwise moment = 100 × 1.5
Clockwise moment = 150 Nm
II. Determination of the anticlockwise moment.
Distance (d) = 2 m
Force (F) = 200 N
Anticlockwise Moment =?
Moment = Force × distance.
Anticlockwise moment = 200 × 2
Anticlockwise moment = 400 Nm
III. Determination of who will turn the sea saw.
Clockwise moment = 150 Nm
Anticlockwise moment = 400 Nm
Since the anticlockwise moment is greater than the clockwise moment, it therefore means that the anticlockwise moment will turn the sea saw.
A rocket travels 200,000 meters in a time of 4.40 seconds . what of the speed of the rocket ?
Answer:
the speed of the rocket is 45454.5455
Explanation: Because the speed formula is basically just distance/ divided by time all you need to do is divide 200,000 meters by 4.40 seconds. And then thus you will get the speed.
Answer:
45454.55 m/s
Explanation:
[tex]S=\frac{d}{t}[/tex]
= [tex]\\S=\frac{200000}{4.40}[/tex]
=45454.55 m/s
A 56 kg object is attached to a rope, which can be used to move the load vertically.
a. What is the tension force in the rope when the object moves upward at a constant velocity?
b. What is the tension force in the rope when the object accelerates downward at a constant
acceleration of 1.8 m/s2
c. What is the tension force in the rope when the object accelerates upward at a constant
acceleration of 1.8 m/s2
Answer:
a) T=549.36N Upwards
b) T=448.56N Upwards
c) T=650.16N Upwards
Explanation:
The very first thing we can do to solve this problem is to draw a free body diagram we can use to analyze the situation (see attached picture).
On the diagram we can see there are only two forces acting on the object: the tension of the rope and the weight of the object itself.
a)
Since the object is moving at a constant speed, this means that its acceleration will be zero. So we can do a sum of forces like this:
[tex]\sum F=0[/tex]
T-W=0
T=W
T=mg
[tex]T=(56kg)(9.81m/s^{2})[/tex]
T=549.36N upwards
b)
For part b, since the object is accelerating downwards, we wil say that it's acceleration is negative, so [tex]a=-1.8m/s^{2}[/tex]
so we can do a sum of forces again:
[tex]\sum F=ma[/tex]
so
T-W=ma
T=ma +W
T=ma+mg
T=m(a+g)
and now we substitute:
[tex]T=(56kg)(-1.8 m/s^{2}+9.81 m/s^{2})[/tex]
which yields:
T=448.56N upwards (in this particular case, the tension always goes upwards)
c)
Since the object is moving upwards, we can say that its acceleration will be positive, so [tex]a =1.8m/s^{2}[/tex]
we can take the solved equation we got on the previous part of the problem, so we get:
T=m(a+g)
[tex]T =(56kg)(1.8 m/s^{2}+9.81 m/s^{2})[/tex]
which yields:
T=650.16N upwards
The tension force in the rope when the object moves upward at a constant velocity is 548.8 N.
The tension force in the rope when the object accelerates downward at a constant acceleration is 448 N.
The tension force in the rope when the object accelerates upward at a constant acceleration is 649.6 N.
The given parameters:
Mass of the object, m = 56 kgThe tension force in the rope when the object moves upward at a constant velocity;
T = ma + mg
at constant velocity, a = 0
T = mg
T = 56(9.8)
T = 548.8 N
The tension force in the rope when the object accelerates downward at a constant acceleration of 1.8 m/s².
T = mg - ma
T = m(g - a)
T = 56(9.8 - 1.8)
T = 448 N
The tension force in the rope when the object accelerates upward at a constant acceleration of 1.8 m/s².
T = mg + ma
T = m(g + a)
T = 56(9.8 + 1.8)
T = 649.6 N
Learn more about reading of elevator scale here: https://brainly.com/question/2516315
Carmen is helping load furniture and boxes onto a moving truck. She picks up boxes of her things, places them on a cart, and pushes the cart to the moving van. Which term best describes the type of force Carmen is using? * contact speed gravity noncontact
Answer:
contact
Explanation:
A contact force is defined as a force which requires some contact to occur. When we apply force that is in contact with the objects are called as contact forces.
In the context, Carmen is loading furniture and boxes on a moving van by picking up by picking up the boxes or furniture on a cart and pushing it onto the van. Carmen uses contact forces to lift the boxes and furniture onto the van.
When you walk into a dark room and turn the light on, do the electrons travel all the way from the switch to the light?
Answer:
Yes
Explanation:
This is because for the light to come on, electric current has to flow through it which is due to electron motion. As the electrons move through the light, it turns electrical energy to light energy, so the light comes on.