a boat can travel at a speed of 8 km/h in still water on a lake. in the flowing water of a stream, it can move at 8 km/h relative to the water in the stream. if the stream speed is 3 km/h, how fast can the boat move past a tree on the shore when it is traveling.

Answers

Answer 1

Relative velocity of the river with respect to shore, V = 20 km/h.

Relative velocity of the river with respect to shore ,V = 10 km/h

Velocity of the shore = 0 km/h

Relative velocity of the river with respect to shore:

[tex]V = V_{r} - V_{s}[/tex]

Velocity of the river [tex]V_{r}[/tex] = 10 km/h

Relative velocity of the boat with respect to river ,V'= 10 km/h

[tex]V^{'} = V_b} -V_{r}[/tex]

Velocity of the boat [tex]V_b}[/tex] = 20 km/h

Relative velocity of the boat with respect to shore, V":

[tex]V_{"} = V_{b} - V_{s}[/tex]

Relative velocity of the boat with respect to shore is 20 km/h.

What is Relative velocity?

It is the pace at which one object's relative location changes in relation to another object over time.

Think about two trains that are traveling in the same direction and at the same pace. Even though the tracks, buildings, and trees on each side of the railway indicate that both trains are moving, to the observer of one train, the other train appears to be stationary. The other train seems to be moving at a constant speed.

The speed at which one thing moves in relation to another is known as the relative velocity of the two objects.

To learn more about Relative velocity from the given link:

brainly.com/question/19260269

#SPJ4


Related Questions

What advantages does a large diameter astronomical telescope have over a telescope of a smaller diameter?.

Answers

Larger diameter, capabilities of the better gathering of light, and better resolving power are those advantages that a large diameter astronomical telescope has over a telescope of a smaller diameter.

The larger the lens or mirror which is having the diameter or aperture, the telescope will then gather more light and will be at higher resolution as the viewer has the chance to see fine in detail it can. Larger scopes also have focal lengths of longer size, which means the magnifications will be greater and the sizes of images are possible with accessibility by both the eye as well as the camera.

A larger telescope mirror is a type that allows us to view the fainter objects farther into the region of space, therefore the larger one in round nature is better. The shape does not matter just as long as it can bring light to the focus point.

Large telescopes will be having several merits over their smaller counterparts, and the concerned resolution will be as how much in detail we are able to see a celestial object is the first priority. Generally, the resolution depends mainly on two things the stability of the atmosphere as well as the aperture present in your telescope. The user can only control any one of these factors.

Learn to know more about an astronomical telescope at

https://brainly.com/question/28113233

#SPJ4

A bullet is fired horizontally 0.58 meters off the ground. Assuming gravity is 9.8 m/s2, how long (t) was the bullet in the air?

Answers

Since the gravity acts on the vertical component of the velocity of the object, the bullet will spend 0.34 s in air.

What is Vertical Motion ?

Vertical motion is also known as motion under gravity. The gravity acts on the vertical component of the velocity of the object.

Given that a bullet is fired horizontally 0.58 meters off the ground. Assuming gravity is 9.8 m/s², the gravity will act on the bullet vertically.

The height h = 0.58 mThe initial velocity u = 0

Using the formula h = ut + 1/2gt² we can know how long (t) was the bullet in the air.

Substitute all the parameters into the formula

0.58 = 0 + 1/2 × 9.8 × t²

0.58 = 4.9t²

t² = 0.58/4.9

t² = 0.1184

t = √0.1184

t = 0.34 s

Therefore, the bullet will spend 0.34 s in air.

Learn more about Motion Under Gravity here: https://brainly.com/question/20614605

#SPJ1

The force between two masses m and m is 8.0 n when they are a certain distance r apart. what will the force between these two masses be if the distance between them is increased by a factor of four?

Answers

The force between two masses when the distance between those two masses is increased by a factor of four is 0.5 N

We know that,

F = G [tex]m_{1}[/tex] [tex]m_{2}[/tex] / [tex]r^{2}[/tex]

where,

F = Force

G = Constant

[tex]m_{1}[/tex], [tex]m_{2}[/tex] = Masses

r = Distance between those two forces

Given that,

F = 8 N

When the distance between those two masses is increased by a factor of four,

[tex]F^{'}[/tex] = G [tex]m_{1}[/tex] [tex]m_{2}[/tex] / [tex]( 4r)^{2}[/tex]

[tex]F^{'}[/tex] = F / 16

[tex]F^{'}[/tex] = 8 / 16 = 1 / 2

[tex]F^{'}[/tex] = 0.5 N

Force is a phenomenon which can cause an objects motion to change. It causes an object with mass to change its velocity.

Therefore, the force between two masses when the distance between those two masses is increased by a factor of four is 0.5 N

To know more about Force

https://brainly.com/question/13191643

#SPJ4

J. J. Thomson used a cathode-ray tube to calculate the charge-to-mass ratio of the electron. Which of these suggested the presence of a negative particle?.

Answers

J. J. Thomson used a cathode-ray tube to calculate the charge-to-mass ratio of the electron. The deflection of cathode rays towards the positively charged surface and emission of green light at the far end of the tube confirmed that they are negatively charged particles.

In 1897, J.J Thomson performed a cathode ray tube experiment to determine the charge-to-mass ratio of electrons.

Due to high voltage, a beam of particles was allowed to flow from the negatively charged end to the positively charged end of the tube.

One end of the tube was painted with phosphorous. When electrons struck the wall a green spark was observed which confirmed the presence of negatively charged particles i.e. electrons.

To put it simply, cathode rays came from the cathode tube and deflected towards a positively charged plate showing that they are negatively charged particles.

If you need to learn more about cathode rays click here

https://brainly.com/question/25879572

#SPJ4

The gusset plate is subjected to the forces of three members. determine the tension force in member c and its angle, , for equilibrium. the forces are concurrent at point o. take f = 8 kn.

Answers

The tension force would be 7.62N. Its angle of equilibrium would be 70.23°

Calculation

For equilibrium,

for direction X,

Tcos([tex]\theta[/tex]-36.87°) = 8cos (36.87°) → 1

For direction Y,

9 = 8sin36.87° + Tsin([tex]\theta\\[/tex]-36.87°)

Tsin([tex]\theta\\[/tex]-36.87°) = 9- 8sin(36.87°) → 2

Now dividing equation 2 by 1,

tan([tex]\theta\\[/tex]-36.87°) = [tex]\frac{9-8*3/5}{8*4/5}[/tex]

tan([tex]\theta\\[/tex]-36.87°) = 0.66

[tex]\theta\\[/tex] - 36.87°= [tex]tan^{-1}[/tex](0.66)

[tex]\theta\\[/tex] - 36.87° = 33.42°

⇒ [tex]\theta[/tex] = 40.29°

Now from equation 1,

Tcos(33.42°) = 8cos(36.87°)

T = [tex]\frac{8*4/5}{0.84}[/tex]

T = 7.62N

Thus, we get the tension force as 7.62N

To know more about tension, visit:

https://brainly.com/question/11348644

#SPJ4

You measure the mass of a 0.500 kg (500 g) standard on your balance four times. The following measurements result: 492 g, 507 g,
505 g, 496 g.
Which choice best describes your balance?
not precise and not accurate
not precise but accurate
precise but not accurate
precise and accurate

Answers

If the measurement is taken for four different times for same weight and is always different then the balance is precise but not accurate.

What are ways to measure mass?

There are numerous instruments available for measuring mass in various settings. The use of gravitational interaction between objects is one of them, along with balances and scales, measurement transducers, vibrating tube sensors, Newtonian mass measurement devices, and balances and scales.

The kilogram, which is defined as equal to 6.6260 x 10³⁴joule second in terms of Planck's constant, is the unit of mass in the International System of Units (SI). A joule is equal to one kilogram multiplied by one square meter per second.

A beam balance is always used to determine mass. Because a spring balance measures weight rather than mass, it will read differently depending on where you are on the planet.

To know more about  beam balance :

https://brainly.com/question/11334484

#SPJ9

What is the object’s position at t=2 s? And does the car change direction? If so at what speed?

Answers

The direction of the car will not change and the speed of the car at time of 2 seconds will be 4 m/s.

What is speed?

The size of the change in an object's position over time or the size of the change in that object's position per unit of time makes the speed of an object, also known as v in kinematics, a scalar number. The instantaneous speed is the upper limit of the average speed as the duration of the time interval gets closer to zero. 

According to the question,

Initial Speed, u is 12 m/s,

Time, t at 2 seconds and,

acceleration is -4 m/s².

Now by using Equation of motion :

v=u+at

v=12+(- 4 m/s²)(2 sec)

V=12-8

V= 4 m/s.

Hence, the speed of the car will be 4 m/s at time 2 seconds and the direction of the car will not change.

To get more information about speed :

https://brainly.com/question/28224010

#SPJ1

6. a stuntman is launched vertically into the air from a cannon and eventually falls back to the ground, landing in the cannon exactly where he started. he reached a maximum height of 22 meters in 3.4 seconds and fell back to the ground in 7.6 seconds. the average velocity of the stuntman is 0 m/s, and the average speed of the stuntman is.

Answers

Answer:

w

Explanation:

Sokol

Two gases are contained in gas bulbs connected by a valve. Gas a is present in a 1 liter bulb at a pressure of 818 torr. Gas b exerts a pressure of 328 torr in a 1 liter bulb. The valve is opened and the two gases come to equilibrium. What is the partial pressure of gas a expressed after equilibrium?.

Answers

The partial pressure of gas expressed after equilibrium is 409 torr.

Which gas is used for bulbs?Incandescent light bulbs are usually filled with argon, which is a common gas. It prolongs bulb life by keeping the tungsten filaments from decaying too quickly. Lighting also makes use of other gases like helium, neon, nitrogen, and krypton.Incandescent lights are what gas lamps are. They generate heat by burning fuel like propane, white gas, or kerosene, and the heat drives light production from the mantles. The mantles, which are made of a ceramic mesh, contain the lantern's flame.The first kind of gas employed, argon, is a gas that is typically found in incandescent light bulbs. Nitrogen may occasionally be added to argon gas. Halogen or xenon gas can be found in some light bulbs. Some light bulbs also include krypton gas.

What is the partial pressure of gas expressed after equilibrium:

1. Write out the units given.

V1= 1 L

Ptot= 818 torr

PPB= 328 torr

V2= 1L

2. Remember= PaVa= PtotVtot

3. Add together volumes for total volumes.

1 L + 1 L= 2 liters

4. Plug in values and solve for PP of gas A.

PPA= Ptot x VA/Vtot

818 torr x 1/2 L= 409 torr

To learn more about gas bulbs, refer to:

brainly.com/question/14056446

#SPJ4

Resolve a vector of 50 km at 35° south of West into its x and y components

Answers

Answer:

See below

Explanation:

With N   at 0 degrees    

   35 degrees south of west becomes  90 + 35 = 125 °

x component      50 km  cos 125  = - 28.7 km

y component       50 km sin 125 =   41 km

A balance has 30N on the left-hand side and 50N on the
right hand side. What weight must be added so that.
the sides are balanced, and to which side?

Answers

20N on the left-hand side

the equation is the position of a particle in space at time t. find the​ particle's velocity and acceleration vectors. then write the​ particle's velocity at as a product of its speed and direction.

Answers

The​ particle's velocity at as a product of its speed and direction is equal to 10 . [tex](\frac{8}{10},0,\frac{6}{10} )[/tex]

What is velocity?

Velocity is the directional speed of a moving item as an indication of its rate of change in position as seen from a specific frame of reference and measured by a specific time standard (e.g., 60 km/h northbound). The idea of velocity is crucial in kinematics, the part of classical mechanics that explains the motion of bodies.

A physical vector quantity called velocity requires both magnitude and direction to be defined. Speed is a coherent derived unit that expresses the scalar absolute value (magnitude) of velocity. Its quantity is expressed in SI units (metric system) of metres per second (m/s or ms1). For example, "5 meters per second" is a scalar while "5 meters per second east" is a vector.

The particle's velocity is the derivative of its position. The particle's acceleration is the derivative of its velocity. You can calculate the velocity and acceleration as follows:

[tex]\vec{v}(t)=\frac{d r}{d t}=\frac{d}{d t}(8 t+5) \vec{i}+\frac{d}{d t}\left(8 t^2-2\right) \vec{j}+\frac{d}{d t}(6 t) \vec{k}=8 \vec{\imath}+16 t \vec{j}+6 \vec{k}[/tex]

[tex]\vec{a}(t)=\frac{d v}{d t}=\frac{d}{d t}(8) \vec{i}+\frac{d}{d t}(16 t) \vec{j}+\frac{d}{d t}(6) \vec{k}=0 \vec{i}+16 \vec{j}+0 k[/tex]

The velocity at t = 0 is  [tex]\vec{v}(0)=8 \vec{i}+0 \vec{j}+6 k[/tex]

if the speed at t = 0 is [tex]||\vec{v}(0)||[/tex] = 10 then the velocity at t = 0 can be written as a product of the speed at t = 0 & the direction at t = 0 is

[tex]\vec{v}(0)=\|\vec{v}(0)\| \frac{\vec{v}(0)}{\|\vec{v}(0)\|}=10 \cdot\left(\frac{8}{10}, 0, \frac{6}{10}\right)[/tex]

Learn more about Velocity

brainly.com/question/80295

#SPJ4

Full question

The equation r (t) = (8t + 5)i + (8t^2 - 2)j + (6t )k is the position of a particle in space at time t. Find the​ particle's velocity and acceleration vectors. Then write the​ particle's velocity at t equals 0 as a product of its speed and direction. What is the velocity​ vector?

. You roll a tennis ball a distance of 18 meters. It takes 6 seconds to cover the distance. What is the average speed of the tennis ball?

I got 3 as an answer am I right

all I can offer is 14 points since that's all I have left lol

Answers

The average speed of the tennis ball is 3 m/s.

What is average speed?

Average speed can be defined as the ratio of the total distance to the total time covered by the body. The S.I unit of average speed is m/s.

To calculate the formula below.

Formula:

S = d/t............... Equation 1

Where:

S = Average speed of the balld = Total Distancet = Total time.

From  the question,

Given:

d = 18 meterst = 6 seconds

Substitute these values into equation 1

S = 18/6S = 3 m/s

Hence, The average speed of the tennis ball is 3 m/s.

Learn more about average speed here: https://brainly.com/question/4931057

#SPJ1

bathyscaphes are capable of submerging to great depths in the ocean. what is the pressure at a depth of 5 km, assuming that seawater has a constant specific gravity of sg

Answers

Water depth Bathyscaphes can submerge at a depth of h=5 km=5000 m.

the seawater's particular weight,

γ=10.1kN/m3

Through the equation, the density of the seawater and its specific weight are connected.

γ=ρg→(I)

where rho is the seawater's density and g is the acceleration brought on by gravity.

Given is the pressure at a depth of h meters. ,

P=ρgh→(II)

When equation I is substituted, equation (ii),

P=γh

About substituting

P=10.1×103×5000=50.5×106Pa=50.5MPa

1 Pascal =1.45×10−4psI

50.5 MPa corresponds to

50.5MPa=50.5×106×1.45×10−4psI=7322.5psI

To learn more about bathyscales click on this link:

brainly.com/question/14366848

#SPJ4

Use Ohm's Law to calculate the following:
a) The voltage required to produce a current of 2A in a 12ohms resistor.
b) The voltage required to produce a current of 0.1A in a 200ohms resistor.
c) The current produced when a voltage of 12V is applied to a 10ohms resistor.
d) The current produced when a voltage of 230V is applied to a 10ohms resistor.

Answers

Ohm's Law is a formula used to determine how voltage, current, and resistance in an electrical circuit relate to one another.

Use Ohm's Law to calculate the following:

a) The voltage required to produce a current of 2A in a 12ohms resistor.

To scientists, Einstein's Relativity equation (E = mc2) is as fundamental as Ohm's Law (E = IR).

E = I x R

The difference in electric potential between two points, which is defined as the work required per unit of charge to move a test charge between the two points, is known as voltage, electric potential difference, electric pressure, or electric tension.

The formula reads voltage = current x resistance, or V = A x, or volts = amps x ohms.

Therefore, Voltage required = 2 * 12 = 24 volts

To know more about Voltage, click on the link below:

https://brainly.com/question/12648660

#SPJ9

infrared radiation has wavelengths ranging from about 800 nm to 1 mm. what is the frequency of radiation of wavelength 960 nm? answer in units of s−1 .

Answers

The frequency of radiation of the given wavelength is 3.125×[tex]10^{14}[/tex] Hz.

What is wavelength ?

Given λ = 960nm

f=c/λ

f= 3×[tex]10^{8}[/tex]/960×[tex]10^{-9}[/tex]

f= 3.125×[tex]10^{14}[/tex]

A waveform signal's wavelength is defined as the separation between two identical points (adjacent crests) in adjacent cycles as the signal travels through space or along a wire. This length in wireless systems is typically expressed in meters (m), centimeters (cm), or millimeters  (mm).

The wavelength is the separation between two wave crests, while troughs have the same wavelength. The number of vibrations that pass over a specific place in a second is known as the frequency and is expressed in cycles per second (Hz) (Hertz).

To learn more about wavelength  from the given link:

brainly.com/question/13533093

#SPJ4

Photons are shone on a piece of metal and one electron is ejected for each absorbed photon. What happens when the wavelength of light is decreased?.

Answers

When the wavelength of light is decreased the ejected electrons would have greater kinetic energy.

What is kinetic energy?

A kind of energy that an item or particle possesses as a result of its mobility is known as kinetic energy.

When an item undergoes work—the transfer of energy—by being subjected to a net force, it accelerates and consequently obtains kinetic energy.

An object's kinetic energy is the energy it has as a result of motion.

Kinetic energy is the force that drives an object's motion.

Kinetic energy can be found in moving objects such as a bullet traveling at high speed or a person walking.

The energy brought on by the random, continuous bouncing of atoms or molecules is another illustration of kinetic energy.

To learn more about kinetic energy, refer

https://brainly.com/question/12337396

#SPJ4

A lion is running at constant speed toward a gazelle that is standing still, as shown in the top figure above. After several seconds, the gazelle notices the lion and accelerates directly toward him, hoping to pass the lion and force him to reverse direction. As the gazelle accelerates toward and past the lion, the lion changes direction and accelerates in pursuit of the gazelle. The lion and the gazelle eventually each reach constant but different speeds. Which of the following sets of graphs shows a reasonable representation of the velocities of the lion and the gazelle as functions of time?​

Answers

The graph shown in the first option shows a reasonable representation of the velocities of the lion and the gazelle as functions of time, therefore the correct answer is option A.

What is Velocity?

The total displacement covered by any object per unit of time is known as velocity. It depends on the magnitude as well as the direction of the moving object.

As given in the problem if a lion is running at constant speed toward a gazelle that is standing still, as shown in the top figure above.

Thus, the correct answer is option A.

To learn more about Velocity from here, refer to the link;

brainly.com/question/18084516

#SPJ1

vector a has magnitude 4 m and is directed to the south. vector a has magnitude 3 m and is directed to the east. what are the magnitude and direction of s – e? a. 5 m, southeast b. 1 m, southwest c. 5 m, southwest d. 1 m, southeast

Answers

The correct option is (c) 5m southwest.

What are vectors?

A quantity or phenomena with independent qualities for both size and direction is called a vector. The word can also refer to a quantity's mathematical or geometrical representation. Velocity, momentum, force, electromagnetic fields, and weight are a few examples of vectors in nature.

the vector S and E is,

S = -4m j

E = -3m i

the vector is

|S - E| = √(-4)² + (-3)²

|S - E| = 5m

Types of Vectors List

Zero Vector.Unit Vector.Position Vector.Co-initial Vector.Like and Unlike Vectors.Co-planar Vector.Collinear Vector.Equal Vector.

to learn more about vectors go to -

https://brainly.com/question/25705666

#SPJ4

How long would it take a fly to cover a 60 meter space while traveling at a speed of 5.4 m/s?

Answers

It would take a fly 11.11 seconds to cover the given distance of 60 meters.

Velocity is a term that describes the speed and direction of a point's motion. The speed at which the point is moving along its path in time is known as the magnitude of the velocity.

Velocity is a vector quantity that cannot be fully described by a number because it has direction in addition to magnitude.

Changes in an object's position are referred to as displacement. Displacement is represented by a vector. This implies that it has both a direction and a magnitude.

Given in the question

Velocity = 5.4 m/s

Distance = 60 meters

Time = Distance/Velocity

Put in the values, we get

Time = 60/5.4 seconds

Time = 11.11 seconds

Therefore, it would take 11.11 seconds for a fly to cover a 60-meter space while traveling at a speed of 5.4 m/s.

LEARN MORE ABOUT VELOCITY HERE:

https://brainly.com/question/80295

#SPJ9

2. A small 30-kilogram canoe is floating downriver at a speed
of 2 m/s. What is the canoe's kinetic energy?
a. 32 J
c. 120 J
b. 60 J
d. 900 J

Answers

60 J would be the canoes KE

(5)_____ states that "the of an object is equal to the on an object divided by the mass of the object.​

Answers

Newton's second law of motion states that "the acceleration of an object is equal to the force on an object divided by the mass of the object.​"

Newton's second law of motion is also called the law of acceleration as it tells us about the acceleration of a moving object under the influence of an unbalanced force or net force not equal to zero.

According to the law, the acceleration of an object is directly proportional to the force on the object and inversely proportional to the mass of the object.

Acceleration a ∝ Force F                                                                       ....1

Acceleration a ∝ 1/Mass m                                                                    ....2

From 1 and 2  Acceleration a = [tex]\frac{Force}{Mass}[/tex]

Therefore, Newton's second law of motion states that "the acceleration of an object is equal to the force on an object divided by the mass of the object.​"

LEARN MORE ABOUT LAWS OF MOTIONS HERE:

https://brainly.com/question/26083484

#SPJ9

A runner is jogging in a straight line at a steady [tex]v_{r}[/tex]= 4.5 km/hr. When the runner is L= 8.1 km from the finish line, a bird begins flying straight from the runner to the finish line at [tex]v_{b}[/tex]= 13.5 km/hr (3 times as fast as the runner). When the bird reaches the finish line, it turns around and flies directly back to the runner.
What cumulative distance does the bird travel? Even though the bird is a dodo, assume that it occupies only one point in space (a “zero” length bird), travels in a straight line, and that it can turn without loss of speed. Answer in units of km.

After this first encounter, the bird then turns around and flies from the runner back to the finish line, turns around again and flies back to the runner. The bird repeats the back and forth trips until the runner reaches the finish line.
How far does the bird travel from the beginning (including the distance traveled to the first encounter)? Answer in units of km.

Answers

Answer: 1325t miles

Explanation: you have to divide all of them

An appliance is rated at 4500 volt-ampere, 240 volts, single-phase. what is the maximum size fuse permitted?

Answers

the maximum size of fuse permitted in a single phase is 18.75 ampere.

POWER = amount of energy transferred per unit time.

Power = voltage x current

power = 4500 volt-ampere

voltage = 240 volt

current = power/voltage

       = 4500/240

      = 18.74 ampere

the maximum size of fuse permitted in a single phase is 18.75 ampere.

To know more about power,

https://brainly.com/question/18347542

#SPJ1

.
If you want to determine the amount of water in a swimming pool what are you calculating?

A. Area
B. Volume
C. Distance

Answers

Length times width gives the surface area of the pool. Multiplying that by the average depth gives the volume in cubic feet. Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool (expressed in gallons).

Answer:

the answer is volume

Explanation:

wei is standing in wavy water and notices the depth of the waves varies in a periodic way that can be modeled by a trigonometric function. he starts a stopwatch to time the waves.

Answers

The function of wavy water is  D(t) = 33.5 +21.5cos(2π/3·(t -1.1))

What are wave functions?

In quantum physics, a wave function is a mathematical representation of the quantum state of a standalone quantum system. The probabilities for potential outcomes of measurements performed on the system may be calculated from the wave function, which is a complex-valued probability amplitude.

The function can be ...

 D(t) = A +Bcos(C(t-p))

where A is the average depth (55+12)/2 = 33.5 cm,

 B is the peak deviation from average, 55 -33.5 = 21.5 cm,

 C is the horizontal scale factor (2π/T) = (2π/3) for a period (T) of 3 seconds,

and p is the phase offset, given as 1.1 seconds.

the function -

 D(t) = 33.5 +21.5cos(2π/3·(t -1.1))

to learn more about wave functions go to -

https://brainly.com/question/28447288

#SPJ4

A boat takes 4.0h to travel 26 km down a river, then 5.0h to return. how fast is the river flowing

Answers

The speed of the river is 0.5 Km/hr

How do find the speed of the river?

Let X be the speed of the boat.

Let Y be the speed of the river.

Downstream speed

X - Y = 4

Upstream speed

X + Y = 5

By solving, we get

2X = 9

X =  4.5 Km/hr

Y =  0.5Km/hr

To learn more about speed, refer

https://brainly.com/question/13943409

#SPJ4

check if
v^{2} = u^{2}+2as is dimensionally correct

Answers

Using dimensional analysis; L²/T⁴ = 2 * L²/T⁴

Thus, v² = u² + 2as is dimensionally correct.

What is dimensional analysis?

Dimensional analysis is the process whereby the various quantities of measurement are expressed in their basic unit or the fundamental units from which they are derived.

The fundamental units which are used in dimensional analysis is done is:

mass expressed as Mlength expressed as Ltime expressed as T

To check if v² = u² + 2as is dimensionally correct:

unit of v = m/s = L/T

unit of u = L/T

unit of a = L/T²

s = L

(L/T)² = (L/T)² + L * L/T²

L²/T⁴ = L²/T⁴ + L²/T⁴

L²/T⁴ = 2 * L²/T⁴

The expression, v² = u² + 2as is dimensionally correct.

Learn more about dimensional analysis at: https://brainly.com/question/26397751

#SPJ1

An airplane is delivering food to a small island. It flies 100 m above the ground at a speed of 170 m/s .

Answers

The distance traveled is mathematically given as

D = 766.7 m

What is the distance traveled?

The airplane's horizontal velocity was measured to be 170 meters per second.

100 meters is the equivalent of the distance above the earth.

Generally, the equation for distance is  mathematically given as

s = u_0t + (1/2) g t2

then, we get

(100 m) = (0.5) (9.8 m/s2) t2

[tex]t = \sqrt{(100 m*4.9 m/s2)}[/tex]

t = √20.4 s2

t = 4.51 sec

we know that,

D = vx t

D= (170 m/s) (4.51 s)

D = 766.7 m

Read more about distance

https://brainly.com/question/15172156

#SPJ1

A juggler throws two balls in the air. She throws the first ball up with a velocity of 9. 8 m/s. She throws the second ball up with a velocity of 14. 7 m/s. How long after catching the first ball will she catch the second?.

Answers

Juggler will catch the second ball 1 second after catching the first ball as the first ball comes down 1 second earlier than the second.

Two balls are thrown into the air. The first ball goes up with a velocity of 9.8m/s and the second ball goes with a velocity of 14.7m/s. We have to find out the Time difference between the balls when both of them land in the hand. We have Newton's first equation :  v = u + at =>  t = (v-u)/a

where, v = Final velocity, u = Initial velocity, a=g = Acceleration of gravity, and t = Time

For First ball, v1 = 9.8m/s, u1 = 0, g = 9.8 (acceleration for gravity),             t1 = time and multiplying the equation by 2 for marking journey of balls for both going up and down

              => t1 = 2(v1-u1)/g    =>  t1 = (9.8-0)/9.8

              => t1 = 2 seconds

For second ball, v2 = 14.7m/s, u2 = 0, g = 9.8 (acceleration for gravity),

t2 = time & multiplying the equation by 2 for marking journey of ball for both going up and down  => t2 = 2(v2-u2)/g  

              => t2 = (14.7-0)/9.8  => t2 = 3 seconds

Difference between the time taken by both balls t = t2-t1

                    => t = 1 second

So the second ball lands after 1 second.

To know more about Equations of motion, Click here :

https://brainly.com/question/13883874

#SPJ4

         

       

   

Other Questions
f(x)=b x and g(x)=logbx are inverse functions. Explain why each of the following is true.d. The function k(x)=logc x is a vertical stretch or compression of g or of its reflection -g . On a plane trip to Hawaii, the baggage weight projected was 2,182 1/4 lbs. The actual weight of all bags totaled 2,095 1/3 lbs. By how much was the projected weight overstated? semester 1 study guide us history?1) what did business owners viwed during the gilded age ?2) what did the Plessy v.Ferguson decision do for America?3) what was the result of the Pullam Strikes 4) how did mass transit transform cities?5) how did leisure time transform America? If Amal can maintain that pace, how long will it take him to run 1 mile? Disney and other global firms have successfully bridged the cultural gap by producing advertising that appeals to the same target market across. Find the measure of the angle indicated. If the ncua charges 3.3 cents per 100 dollars insured and credit union m pays $5,995 in ncua insurance premiums, approximately how much is in credit union ms insured deposits? a. $15.5 million b. $1.9 million c. $19.8 million d. $18.2 million An increase in prices of inputs will cause a _change in prices with an elastic demand as opposed to an inelastic demand. The change in input prices will cause a ___change in quantity if demand is elastic as opposed to an inelastic demand. The figures below is made of two identical triangular prisms. What is the volume of the figure? yu sngnyong (translated by choi byonghyon), the book of corrections: reflections on the national crisis during the japanese invasion of korea 1592-1598 (berkeley: the institute of east asian studies, university of california, 2002) What two principles of the Weimar constitution contributed to the rise of the Nazi Party? How do these two principles connect? (100 POINTS AND WILL MARK BRAINLIEST!!!) A ball is dropped from the top of a tall building of height = 91 m. What was the magnitude of the velocity of the ball at impact? The magnitude of gravity use 10m/sAnswer to the nearest hundredth of a meter/secDraw a position time graph that represents the problemDraw a velocity time graph that represents the problem. Find the midpoint of the segment with the following endpoints.(5, 5) and (10, 1) Please make a paragraph about how in the book animal farm: Napoleon uses fear as a mechanism to control the other animals. Please make this around a paragraph. Doesn't need to be super long. what is the equation in slope intercept form of the line that passes throught the points (-4, 2) and (12, 6) odify the guessing-game program so that the user thinks of a number that the computer must guess.The computer must make no more than the minimum number of guesses, and it must prevent the user from cheating by entering misleading hints.Use I'm out of guesses, and you cheated and Hooray, I've got it in X tries as your final output. 3.2 What occurs at the dewpoint? (1 pt)3.3 Why is the saturated adiabatic lapse rate lower than the dry adiabatic rate? (1 pt) What is s = vt - 1/2at^2 used for? Why shouldnt Jericho be a world heritage site You are doing a study on the enzymatic effects of lysosomes and want to follow the whole process from the formation of the enzymes to their use in the lysosome. In what location of the cell would you begin this observation?.