Complete question is;
A certain chemical reaction 444 kj releases of heat energy per mole of reactant consumed. Suppose some moles of the reactant are put into a calorimeter (a device for measuring heat flow). It takes 4.68 J of heat energy to raise the temperature of this calorimeter by 6.9 °C. Now the reaction is run until all the reactant is gone, and the temperature of the calorimeter is found to rise by . How would you calculate the number of moles of reactant that were consumed
Answer:
7.27 × 10^(-5) moles
Explanation:
We are given;
Heat energy = 444 kJ/mol
Final Temperature = 6.9 °C
Heat capacity = 4.68 J/°C
Let's calculate the heat generated from the formula;
Heat generated = heat capacity × final temperature
Heat generated = 4.68 × 6.9 = 32.292 J = 32.292 × 10^(-3) KJ
Now, the number of moles of reactant that were consumed is gotten from;
No_ of moles of rctnt consumed = heat energy generated/heat energy used = (32.292 × 10^(-3))/444 = 7.27 × 10^(-5) moles
Percentage of C in CO
The percentage of C in CO = 42.9%
Further explanationGiven
CO compound
Required
Percentage of C
Solution
Proust :
Compounds are formed from elements with the same Mass Comparison so that compounds have a fixed composition of elements
Ar of C = 12 g/mol
MW of CO = 28 g/mol
%C :
[tex]\tt =\dfrac{Ar~C}{MW~CO}\times 100\%\\\\=\dfrac{12}{28}\times 100\%\\\\=42.9\%[/tex]
answer to this question is = 42.9 %
Explanation:
mark me as brainliest
calculate the number of molecules in 6.4g of Sulphur (iv) oxide
Answer:
N= mass/molar mass
complete the solve
ltennelmessifcb avatar
ltennelmessifcb
45 minutes ago
Chemistry
Senior High School
You are given 600 grams of sodium chloride (NaCl), but you are planning to purify the substance and extract just the sodium. How many moles of Na can you theoretically extract from 600 grams of NaCl? Explain your reasoning.
Moles of Na theoretically extract : 10.256
Further explanationGiven
600 g of NaCl
Required
moles of Na
Solution
Na can be electrolyzed from NaCl(molten)
Na⁺ + e⁻⇒ Na
Cl⁻⇒1/2 Cl₂ + e⁻
Overall reaction :
NaCl⇒Na + 1/2 Cl₂ x2
2NaCl⇒2Na + Cl₂
mol of NaCl(MW=58.5 g/mol) :
= 600 g : 58.5 g/mol
= 10.256
From the equation, mol ratio of NaCl : Na = 2 : 1, so :
mol Na = mol NaCl = 10.256
help asap pls getting timed !
Answer:
Calcium carbonate and citric acid.
Explanation:
Hello!
In this case, considering the text, we can notice that calcium carbonate combines with citric acid to produce the calcium citrate water and carbon dioxide as shown on the following equation:
[tex]3CaCO_3+2C_6H_8O_7\rightarrow Ca_3C_{12}H_{10}O_{14}+CO_2+H_2O[/tex]
Whereas the reactants, at the left side, are identified as calcium carbonate and citric acid.
Best regards!
Which best describes the changes occurring to the earth's surface over time?
1.) Mountains are gradually being worn down, but no new ones are formed
2.) New mountains are being formed as old mountains are gradually worn down
3.) More mountains are gradually formed as the oceans recede.
4.) New mountains are only formed under the oceans.
Answer:
I would say the answer is 2
The formation of new mountains due to tectonic movements is reporting now whereas, some of the olden mountains are worn down. Thus option 2 is correct.
What is tectonic movement?Earth crests is made of tectonic plates of different sizes and shapes. These plates were not apart and was one in the earlier times of earth and no separate continents were there. When heat in the atmosphere made the magma hot and the hot fluid flow makes the plate moving.
The tectonic plate movement is different in different regions and its results be different. Some movements results in the formation of mountains mostly when the plates are moving each other and one plate rise the edge of others.
Some movement results in islands, folded mountains, volcanic mountains etc. These mountains may worn down over time and there is a possibility of formation of new mountains in regions where significant plate movement occurs.
To find more about plate movement, refer the link bellow:
https://brainly.com/question/3970445
#SPJ2
meaning of science in university
Answer:
Science is the pursuit and application of knowledge and understanding of the natural and social world following a systematic methodology based on evidence. Experiment and/or observation as benchmarks for testing hypotheses
Explanation:
How many moles of Ca are in 1.25x1023 atoms?
We used two conversion factors in this unit, they are provided below. It is your responsibility to know which conversion factor to use!
Avogadro’s number: 6.02x1023 atoms = 1 mole
Molar mass of calcium: 40.078 g Ca = 1 mol Ca
A. 3.12x10^21 mol
B. 0.21 mol
C. 3.12 mol
D. 0.21x10^21 mol
B. 0.21 mol
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Using Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:Step 1: Define
1.25 × 10²³ atoms Ca
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
Set up: [tex]\displaystyle 1.25 \cdot 10^{23} \ atoms \ Ca(\frac{1 \ mol \ Ca}{6.022 \cdot 10^{23} \ atoms \ Ca})[/tex]Multiply: [tex]\displaystyle 0.207572 \ mol \ Ca[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
0.207572 mol Ca ≈ 0.208 mol Ca
Which one is convection??? A heater in a fish tank warming the water at the bottom of the tank, Batteries in a flashlight converting chemical energy into light, Touching a stove and burning your hand, or Warming up next to a fire on a cold night
2. How many Cu atoms have a mass of 4.500x10^5 amu?
Answer:
63.55
Explanation:
4.500 x 10^5 amu x 1 Cu atom / 63.55 amu = 7081 Cu Atom
Cu 1 x 63.55 = 63.55
Write the following elements in increasing order of atomic radius.
Ca, Mg, Be, Sr
Answer:
In increasing order:
Sr, Ca, Mg, Br
How many sigma bonds and how many pi bonds are there in the tetracyanoethylene molecule
Answer:
Nine σ- and nine π
Explanation:
Nine σ- and nine π are there in the molecule of tetracyanoethylene.
Calculate the grams of sugar present in a 355ml can of soda if the water in the can weighs 355g and the density of the soda is 1.06g/mL?
Mass of sugar in the can : 21.3 g
Further explanationGiven
a 355ml can of soda
mass water = 355 g
density of soda = 1.06 g/ml
Required
mass of sugar
Solution
Mass of soda in the can :
= density x volume of the can
= 1.06 g/ml x 355 ml
= 376.3 g
Mass of sugar :
=mass of soda - mass of water
= 376.3 g - 355 g
= 21.3 g
HELP ME PLEASE!! IAM BEING TIMED.
I WILL GIVE YOU BRAINLIEST!
Answer:
Element
Explanation:
Other things on that list like alloy and compound can be broken down, but elements cannot
Answer:
If it is made from solid silver then it is an element. If it is made from a silver alloy then it is a mixture. If it is a silver plated plate (i.e. a plate made from say, copper but with a thin layer of silver on top) then it is an element on top of an element.
Explanation:
I'm assuming you're talking about solid silver, so, i believe an element.
The freezing and thawing action of water affects a rock by...
A. leaving behind sedimentary particles from evaporation
B. gradually breaking down the rock into smaller pieces
C. chemically weathering the rock
D. transforming the rock into igneous rock
Answer:
B
Explanation:
9. If the limits of cow hearing are 23 Hz to 35,000 Hz, what are the sound wavelengths that are
associated with both of these two extremes, assuming the speed of sound is 345 m/s.
Frequency= 23 Hz: Wavelength =
Frequency = 35,000 Hz: Wavelength =
Answer:
wave length=speed/frequency
=365/23
wave length=speed/frequency
=365/35000
Pleas help!!! I’ll make brainlist
Answer: 4.6 billion years ago
Explanation:
Answer:
4.6 billion years ago
hope this helps have a good day or night:)
the 2 written in this formula (2 CH4 is a)
Answer : 2 represent the coefficient.
Explanation :
As we know that:
The coefficients used in the chemical equations shows that the relative amounts of each substance present and this amount can represent either the relative number of molecules or number of moles.
If there is no coefficient then one (1) is assumed.
That means,
The coefficient tell us about that how many molecules or atoms present in the chemical equation.
By the stoichiometry we have to convert moles of a reactant to moles of a product.
The given formula is: [tex]2CH_4[/tex]
In this formula, 2 represent the coefficient and 4 represent the subscript and C and H represents the symbol of element.
Hence, 2 represent the coefficient.
how do the properties of a mixture explain how they can be sepetated
Answer:
Mixtures are unlike chemical compounds, because: The substances in a mixture can be separated using physical methods such as filtration, freezing, and distillation.
What is the SI unit of mass?
Select one:
a.
Ounce
b.
Newton
c.
Pound
d.
Gram
Answer: The answer is D.gram
Explanation:
Calculate the density (in grams per milliliter) of the following gas at 97 °C and 755 mm Hg Sulfur dioxide (SO2)
Answer:
Density = 2.09×10⁻³ g/mL
Explanation:
We solve this problem from the Ideal Gases Law.
P . V = n . R . T
We know that in STP conditions 1 mol of any gas occupies 22.4 L. So we can compare both situations.
22.4 L = 22400 mL
(P₁ . V₁) / T₁ = (P₂ . V₂) / T₂
We make some conversions:
97°C + 273 = 370 K
755 mmHg . 1 atm / 760mmHg = 0.993 atm
We replace data: (1 atm . 22400 mL) / 273 K = (0.993 atm . V₂) / 370 K
((1 atm . 22400 mL) / 273 K) . 370K = 0.993 atm . V₂
V₂ = 30359 atm . mL / 0.993 atm → 30573 mL
Under those conditions (97 °C and 755 mm Hg) 1 mol of gas is contained in 30573 mL.
We determine the amount of gas: 1 mol of SO₂ weighs 64.06g
Density = m/V → 64.06 g / 30573 mL = 2.09×10⁻³ g/mL
A compound consists of atoms of two or more elements combined in a _______.
Answer: small, whole-number ratio
Explanation: 1) A compound consists of atoms of two or more elements combined in a small, whole-number ratio. In a given compound, the numbers of atoms of each of its elements are always present in the same ratio
Answer:
fixed proportion
Explanation:
An electron jumps from energy level 1 to energy level 2 by absorbing a photon of energy 8 eV. What is the most likely energy of the photon that will be emitted by the electron when it moves back down to energy level 1?
A. 2 eV
B. 4 eV
C. 8 eV
D. 12 eV
Answer:
C. 8 eV
Explanation:
In atoms, the energy of each level is quantised. That is one of the reasons why an electron can not exist between energy levels. Thus, when the electron absorbs energy of 8 ev, it get excited and jumps to energy level 2 which has the current value of energy of the electron.
Thus for the electron to move back to its initial energy level, it must emit the exact energy absorbed for its excitation. Therefore, the likely energy of the photon that will be emitted is 8 ev. This would make the electron to have energy that would make it to exist on energy level 1.
The unit of electrical resistance is the: ohm-cm ohm volt ampere
Answer:
Ohm/ Current = Resistance
Explanation:
Answer:
Ohm
Explanation:
Using energy efficiently and managing it well do not reduce society's impact on Earth.
True or False?
Answer:
False
Explanation:
Using less electricity will result in less fuel being burnt which will result in less fuel needing to be extracted from the earth which will reduce society's impact on earth.
compared to a solution with a ph of 7, a solution with a ph of 4 is
Answer:
pH of 7 is neutral
pH of 4 is weak acid
Explanation:
hope it helps you..
Each element has a different:
Number of protons and electrons
Atomic mass and weight
Properties and characteristics
Number of neutrons
Select all that apply
Answer:
Your two answers are numbers of protons and electron and the second one is the atomic mass and weight.
Explanation:
God bless you are you got this
Answer:Number's 1, 2, and 4 are correct
Explanation:
66.41 g of Copper [Cu] are combusted with 8.56g of Oxygen [O] to produce a
compound. What is the empirical formula of the compound?
The empirical formula of the compound : Cu₂O
Further explanationGiven
66.41 g Cu
8.56 g O
Required
The empirical formula
Solution
1. Find mol
Cu(Ar 63.5 g/mol)mol = mass : Ar
mol = 66.41 : 63.5
mol = 1.046
O(Ar=16 g/mol)mol = 8.56 : 16
mol = 0.535
2. mol ratio
Cu : O (divide by smallest mol⇒0.535) :
[tex]\tt \dfrac{1.046}{0.535}\div \dfrac{0.535}{0.535}=2\div 1[/tex]
Which type of change, chemical or physical, is a change on the atomic level?
Explanation:
Examples of chemical changes include, rusting, fire, and overcooking. Nuclear changes occur when the nuclei of atoms are rearranged to form new atoms. Examples of nuclear changes include atomic fission, nuclear fusion, and the energy of sun and stars.
If the equilibrium constant for the reaction A 2B C 5/2 D has a value of 4.0, what is the value of the equilibrium constant for the reaction 2C 5D 2A 4B at the same temperature
Answer:
[tex]K'=\frac{1}{16}[/tex]
Explanation:
Hello!
In this case, since the given reaction is:
[tex]A+ 2B \rightleftharpoons C+ \frac{5}{2} D[/tex]
Whereas the equilibrium constant is:
[tex]K=\frac{[C][D]^{5/2}}{[A][B]^2} =4.0[/tex]
However, the new target reaction reverses and doubles the initial reaction to obtain:
[tex]2C+5D \rightleftharpoons 2A+4B[/tex]
Whereas the equilibrium constant is:
[tex]K'=\frac{[A]^2[B]^4}{[C]^2[D]^5}[/tex]
Which suggest the following relationship between the equilibrium constants:
[tex]K'=\frac{1}{K^2}[/tex]
So we plug in to obtain:
[tex]K'=\frac{1}{4.0^2}\\\\K'=\frac{1}{16}[/tex]
Best regards!
How does latitude affect climate? A The closer to the poles, the warmer it gets. B The closer to the equator, the warmer it gets. C The higher you go up a mountain, the colder it gets. D The higher you go up a mountain, the warmer it gets.
Explanation:
1. Latitude or distance from the equator – Temperatures drop the further an area is from the equator due to the curvature of the earth. In areas closer to the poles, sunlight has a larger area of atmosphere to pass through and the sun is at a lower angle in the sky.