The explanations for the spraying procedure in the store, and your observation at home will be that Lettuce cells are hypertonic to fresh water making them turgid and fresh-looking, but hypotonic to the salt solution, hence plasmolyzed.
Polyunsaturated fatty acids (PUFAs), which made up 71.53–73.50% of the total fatty acid content, were the main constituents of lettuce. With the exception of myristic and arachidic acids, the biofortified samples' fatty acid composition did not change statistically significantly from that of the control lettuce.
Indian lettuce is a broad term used to describe a number of Asian plants with leaves that differ in size and form. It is also known as the Goose vegetable, Tropical lettuce, Ku mak, Yao mak, Ku Mak Cai, Daun Panjang, and Sawi Rana.
Both taproots and fibrous root systems are possible in lettuce plants. Domesticated species' leaves occur in a variety of hues, ranging from pale green to dark red and purple; variegated kinds have also been created.
Learn more about lettuce:
https://brainly.com/question/28726140
#SPJ4
The complete question is ''As you were taking lettuce in the grocery store, you were surprised when water sprinklers suddenly went on, spraying fresh water on the produce. When you got back home, you immersed the lettuce in a salt solution, and within several minutes they became limp and soft. What are the explanations for the spraying procedure in the store, and your observation at home?
A. Lettuce cells are hypotonic to fresh water making them turgid and fresh-looking, but hypertonic to the salt solution, hence plasmolyzed.
B. Lettuce cells are isotonic to fresh water making them turgid and fresh-looking, but hypotonic to the salt solution, hence plasmolyzed.
C. Lettuce cells are isotonic to fresh water making them turgid and fresh-looking, but hypertonic to the salt solution, hence plasmolyzed.
D. Lettuce cells are hypertonic to fresh water making them turgid and fresh-looking, but hypotonic to the salt solution, hence plasmolyzed.
The student filters and dries the precipitate of CaCO, (molar mass 100.1g/mol) and records the data in the table
below.
Volume of Na₂CO3 solution
50.0 mL
Volume of 1.0 M Ca(NO3), added
Mass of CaCO3 precipitate collected
100.0 mL
0.93 g
(c) Determine the number of moles of Na2CO, in the original 50.0mL of solution.
(d) The student realizes that the precipitate was not completely dried and claims that as a result, the calculated
Na₂CO, molarity is too low. Do you agree with the student's claim? Justify your answer.
(e) After the precipitate forms and is filtered, the liquid that passed through the filter is tested to see if it can conduct
electricity. What would be observed? Justify your answer.
(c)The number of moles of Na₂CO₃ , in the original 50ml of solution is 0.0093 moles Na₂CO₃ is present.
(d) Disagree, if grams of CaCO₃ is inflated by being wet Na₂CO₃ is inflated and inflating the molarity value.
(e) After the precipitate form and is filtered, the soluble spectator ions removed. I expect that the filtrate conduct electricity.
The balanced equation is given by :
Na₂CO₃ + Ca(NO₃)₂ -------> CaCO₃ + 2NaNO₃
(c) no. of moles of Na₂CO₃ = ?
mole of Ca(NO₃)₂ = 100 ml = 0.1 L × 1mol/L = 0.1 moles of Ca(NO₃)₂
moles of CaCO₃ formed = mass / molar mass
= 0.93 g / 100 g/mol
= 0.0093 mols
from reaction it is clear that , Na₂CO₃ and Ca(NO₃)₂ is in 1:1 ,
one mole CaCO₃ obtain from 1 mole of Na₂CO₃
so, no. of moles Na₂CO₃ is originally present originally:
= 0.0093 moles CaCO₃ × 1 moles of Na₂CO₃ / 1mol CaCO₃
= 0.0093 moles Na₂CO₃ is present.
(d) Disagree, if grams of CaCO₃ is inflated by being wet Na₂CO₃ is inflated and inflating the molarity value.
(e) After the precipitate form and is filtered, the soluble spectator ions removed. I expect that the filtrate conduct electricity.
To learn more about no. of moles here
https://brainly.com/question/26416088
#SPJ1
How many valence electrons does the ground-state electron configuration of nitrogen have?.
Answer:
5 valence electrons
Explanation:
Write out the reaction that destroys ozone in the stratosphere.
The reaction that destroys ozone in the stratosphere is [tex]3Cl_2 + 2O_3 --- > 6ClO[/tex]
Ozone layer depletionThe ozone layer is a stratospheric layer that shields the planet from harmful radiations coming from the sun. A type of UV radiation known as UVB is known to cause harmful effects on plants and animals, including humans.
The ozone layer is destroyed by halogen-based pollutants such as chlorofluorocarbon (CFC). When these pollutants are exposed to intense UV radiation at the stratospheric layer, they release halogens.
For example, CFC releases chlorine when exposed to intense UV radiation. Chlorine molecules are capable of reacting with ozone to form chlorine monoxide (ClO) according to the following equation:
[tex]3Cl_2 + 2O_3 --- > 6ClO[/tex]
Thus, the stratospheric ozone layer is gradually removed by chlorine.
More on ozone layer depletion can be found here: https://brainly.com/question/11318086
#SPJ1
A student in a lab measured the mass of 380 ml of regular coca cola and the mass of 380 ml of diet coca cola. He found the mass of regular coca cola to be 384 g, and the mass of diet coca cola to be 370g. What physical property of both drinks can you calculate based on the data obtained in experiment 1?.
The physical property of both drinks that we can calculate based on the data obtained is density
The density formula and the procedure we will use is:
d = m/v
Where:
v= volumed= densitym= massInformation about the problem:
v(regular coca cola)= 380 mlm(regular coca cola)= 384 gv(diet coca cola)= 380 mlm(diet coca cola)=370 gd(diet coca cola)= ?d(regular coca cola)= ?Applying the density formula, we get:
d(regular coca cola) = m(regular coca cola)/v(regular coca cola)
d(regular coca cola) = 384 g / 380 ml
d(regular coca cola) = 1.0105 g/ml
d(diet coca cola) = m(diet coca cola)/v(diet coca cola)
d(diet coca cola) = 370 g / 380 ml
d(diet coca cola) = 0.9737 g/ml
What is density?It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.
Learn more about density in: brainly.com/question/1354972
#SPJ4
when leadii nitrate solution is added to sodium bromide solution, solid leadii bromide forms and sodium nitrate solution remains. be sure to include the state of each reactant and product in the equation.
Pb[tex](NO_{3} )_{2}_{(aq)}[/tex] + 2NaBr[tex]_{(aq)\\}[/tex] → Pb[tex]Br_{2}_{(s)}[/tex] + 2[tex]NaNO_{3}_{(aq)}[/tex]
Lead nitrate solution is added to sodium bromide solution, which results in the formation of solid lead nitrate and the retention of sodium nitrate solution.
Ensure that the equation takes into account the states of each reactant and product. Sodium bromide with Lead (II) Nitrate
Here, lead(II) nitrate (Pb(NO3)2) is combined with sodium bromide (NaBr). White precipitate is the end result.
What occurs when sodium bromide solution is mixed with silver nitrate solution?Salt bromide with silver nitrate
Here, silver nitrate is combined with sodium bromide (NaBr) (AgNO3). White precipitate is the end result.
When potassium bromide and lead ii nitrate are combined, does a precipitate form?The lead(II) bromide precipitate is produced by the reaction between solely the lead(II) ions and bromide ions. Before and after, separate potassium and nitrate ions are present.
To know more about sodium iodide visit:
https://brainly.com/question/19952754
#SPJ4
A material with a (n) __________specific heat can absorb a great deal of thermal energy without a great change in temperature
A material with a high specific heat can absorb a large amount of thermal energy while maintaining a constant temperature.
What is specific heat capacity?
The amount of energy required to raise the temperature of 1 kg of mass of a substance is defined as its specific heat capacity.
It is given mathematically as:
C = [tex]\frac{Q}{m}[/tex]ΔT
where
Q denotes the amount of energy supplied.
m denotes the substance's mass.
ΔT denotes the change in temperature of the substance.
The equation can be rewritten as follows:
ΔT = [tex]\frac{Q}{mC}[/tex]
As a result, we can see that a substance's temperature rise is inversely proportional to its specific heat capacity.
As a result, a material with a high specific heat can absorb a large amount of thermal energy without significantly changing its temperature.
To know more about specific heat capacity, visit:
https://brainly.com/question/15084075
#SPJ4
Which features form along all types of plate boundaries?
faults
rift valleys
mountains
ocean ridges
According to the research, the correct options are faults and mountains. These are features form along all types of plate boundaries.
What are plate boundaries?They are the contact areas of the lithosphere between plates, we call them boundaries or edges, where new oceanic crust is formed and in which the plates separate, there are three plate boundaries which are:
ConvergentDivergentTransform plateIn this sense, since they are areas of great geological activity, they have a varied topography since tensional forces are produced that cause their movement that forms mountains and fault blocks.
Therefore, we can conclude that according to the research, the correct options are faults and mountains. These are features form along all types of plate boundaries.
Learn more about plate boundaries features here: https://brainly.com/question/11430739
#SPJ1
Answer:
A
Explanation:
The reaction of cr2o3 with silicon metal at high temperatures will make chromium metal. True or false?.
The reaction of Cr₂o₃ with silicon metal at high temperatures will make chromium metal.
The given statement is true.
This reaction shows the formation of Cr when Cr₂O₃ reacts with silicon metal which signifies that chromium metal is formed
2 Cr₂O₃ (s) + 3Si (s) ------> 4Cr (l) + 3SiO₂ (s)
40.47 g of Si and 146.00 g of Cr₂O₃ will be used to produce 1.921 mol of Chromium.
This reaction would give liquid Chromium metal, which isn't the pure form of metal.
Pure Chromium metal can be obtained from the thermal reduction of Cr₂O₃ with aluminum.
Cr₂O₃(s) + 2Al(l) --> 2Cr(l) + Al₂O₃(s)
To know more about Cr₂o₃ with silicon metal,
https://brainly.com/question/2202085
#SPJ4
The table shows the solubility of two substances in water at 20 °C.
Solubility of Substances
Mass
(kg) Solubility of Sodium Chloride
(g per 100 g of water) Solubility of Lead Nitrate
(g per 100 g of water)
100 L K
200 36 54
Part 1: What will be the values of L and K for 100 kg of each substance?
Part 2: Explain your answer for Part 1.
K and L values for each substance are 108g and 18g, respectively.
What is solubility?Solubility is the formation of a new bond between solute molecules and solvent molecules. Solubility is the maximum concentration of solute that dissolves in a known concentration of solvent at a given temperature in terms of quantity.
We calculated the solubility of NaCl in 100g of water to be 36g.
Lead Nitrate solubility in 100g water = 54g
Determine the value of L:-
200Kg sodium chloride solubility = 36g
100kg Sodium chloride Solubility = [tex]\frac{36g}{100kg} *200kg[/tex] = 18g
Determine the value of K:-
100Kg Lead Nitrate Solubility = 54g
200kg Lead Nitrate Solubility = [tex]\frac{54g}{100kg} *200kg[/tex] = 108g
Solubility difference = solubility of K - solubility of L
Solubility difference = 108g - 18g = 90g
Thus, the 108g and 18g, are the values for K and L respectively.
For more details regarding solubility, visit:
https://brainly.com/question/28170449
#SPJ1
why ammonia is highly soluble in water?
Answer:
yes
Explanation:
please take to 8 glasses of water everyday
when 1.85 g of na2co3•nh2o reacts with an excess of acid 0.457 g of carbon dioxide is formed. what is the value of n? round to the nearest whole number.
Value of n is NaCO3: 0.103/0.07= 1.47 and
h2o: 0.07/0.07= 1.
What is a mole?Mole, also spelled mol, in chemistry, standard scientific unit for measuring large quantities of very small entities such as atoms, molecules, or other specified particles.
The mole designates an extremely the large number of units, 6.02214076 × . The mole was previously defined as number of atoms determined experimentally to be found in 12 grams of carbon-12.
The number of units in a mole also bears name Avogadro’s number, or Avogadro’s constant,
The number of atoms or the other particles in a mole is the same for all substances. The mole is related to mass of an element in the following way: one mole of carbon-12 atoms has 6.02214076 × atoms and a mass of 12 grams.
In comparison, one mole of oxygen consists, by definition, of same number of atoms as carbon-12, but it has a mass of 15.999 grams. Oxygen, therefore, has greater mass than carbon. This reasoning also can be applied to the molecular or formula weights.
The mass of anhydrous NaCO3 representing CO2 production is calculated:
m NaCO3 = 0.457*(106 NaCO3/ 44g co2)= 1.10g
Mass of water is calculated:
m h2o =1.85g-0.457= 1.393g
Moles of each component are calculated:
n NaCO3= 1.10/106 = 0.103 mol
n h2o = 1.393/18 = 0.07 mol
They are divided by smallest:
NaCO3: 0.103/0.07= 1.47
h2o: 0.07/0.07= 1
To know more about Avogadro's number visit: https://brainly.com/question/23944317
#SPJ4
1. This is the process where fossil fuels, forests, or other carbon-containing substances are burned, adding more carbon dioxide to the air. 2. A reaction in which a substance reacts with oxygen gas, releasing energy in the form of light and heat. Example: 1. Burning coal in a factory, cars burning gasoline, a forest fire.
Combustion is the process where fossil fuels, forests, or other carbon-containing substances are burned, adding more carbon dioxide to the air.
Combustion is a reaction in which a substance reacts with oxygen gas, releasing energy in the form of light and heat.
What is combustion?Combustion is a type of chemical reaction that occurs between fuel and oxygen leading to the production or generation of light and heat as a form of energy.
Examples of combustion reactions include the following:
The reaction between butane and oxygen leading to the production of water and carbondioxide.The reaction between methanol and oxygen to yield carbondioxide and water with energy.The reaction between propane and oxygen to yield carbondioxide and water with energy.The reaction between ethane and oxygen to yield carbondioxide and water with energy.Therefore, the question is a correct definition of a type of reaction called the combustion reaction.
Learn more about combustion here:
https://brainly.com/question/25141046
#SPJ1
how many moles of tin are in 2.01 x 10^23 atoms of tin?
Using Avogadro’s number, 0.33 moles of tin are present.
The number of particles (atoms or molecules) in each mole of a material is known as the Avogadro’s number. It's represented with a symbol [tex]N_A[/tex].
Avogadro's number of molecules of that substance make up one mole of an atom, according to the mole concept.
1 mole = 6.02 x [tex]10^2^3[/tex] atoms
Given:
No. of atoms of tin = 2.01 x [tex]10^2^3[/tex]
Avogadro’s number, [tex]N_A[/tex]= 6.02 x [tex]10^2^3[/tex]
To find:
No. of moles, n = ?
Formula:
n = No. of atoms of tin / Avogadro’s number
Calculations:
n = 2.01 x [tex]10^2^3[/tex] / 6.02 x [tex]10^2^3[/tex]
n = 2.01 / 6.02
n = 0.33 moles
Result:
The number of moles present in 2.01 x [tex]10^2^3[/tex] atoms of tin is 0.33 moles
Learn more about Avogadro’s number here:
https://brainly.com/question/1445383
#SPJ9
What would be most beneficial towards maintaining equilibrium probably be him in an eco system over a long period of time
The most beneficial towards maintaining the equilibrium in an ecosystem over a long period of time is to Diversity of organism.
A ecosystem maintains equilibrium by ensuring that each organism has resources and proper living condition fort the survival. four factors balance an ecosystem is water cycle, mineral cycle, energy flow and community dynamics. An ecosystem is place where plants and other organism interact with nonliving factor like weather.
Biodiversity or biological diversity , refers to all the variety of life that exist on earth. our planet is full of variety of living organisms .An ecosystem must have the greatest amount of producers, followed by primary consumers and having smallest no. of tertiary consumers.
hence,The most beneficial towards maintaining the equilibrium in an ecosystem over a long period of time is to Diversity of organism.
To know more about Ecosystem equilibrium here
https://brainly.com/question/23469615
#SPJ4
Ammonia is made up of two pure substances: nitrogen and hydrogen. What
can be true for ammonia, nitrogen, and hydrogen?
1.Ammonia is a mixture, and nitrogen and hydrogen are elements.
2.Ammonia is a mixture, and nitrogen and hydrogen are compounds.
3.Ammonia is a compound, and nitrogen and hydrogen are elements.
4.Ammonia is an element, and nitrogen and hydrogen are compounds.
Answer:
3.Ammonia is a compound, and nitrogen and hydrogen are elements.
Explanation:
Look up the differences between elements, compounds and mixtures.
Name and describe three parts that make up atoms
protons, neutron and electrons are the 3 constituents of atom
Atoms are too small to see by eyes without any equipment , so we have to use the models to visualize them.
The current model has a central nucleus which made up of protons and neutrons surrounded by the electrons in the shells
Protons and neutrons are almost of same size, but protons have a positive charge on them, and neutrons do not have any charge.
Electrons are much smaller than protons and neutrons and have a negative charge.
Protons and neutrons are made up of even smaller particles which is called quarks.
Learn more about parts of atom here-
https://brainly.com/question/6258301
#SPJ9
One gram of sodium chloride will take longer to dissolve in a solution of 2 m glucose than in a solution of pure water. What is the most reasonable explanation for this observation?.
The most reasonable explanation is, sodium chloride and Water are both polar compounds while Glucose is nonpolar.
Since glucose is a non-polar compound while NaCl is polar, we know that polar compounds will dissolve in polar solvents while non-polar compounds will dissolve in non-polar ones. H2O also dissolves NaCl but not glucose because it is a polar molecule.
Due to their bonds with elements like nitrogen, oxygen, or sulfur, polar compounds have distinct zones of positive and negative charge.
Non-polar covalent compounds, on the other hand, are those in which there is no change in electronegativity. In these compounds, the electronegativity does not change, preventing the motion of the bond pair's electrons in the direction of the linked atoms.
Learn more about sodium chloride here:
https://brainly.com/question/7815938?referrer=searchResults
#SPJ4
Nitrogen (n2) is made up of 99.632% 14n and 0.368% 15n. the atomic mass of 14n is 14.003 amu. the atomic mass of 15n is 15.000 amu. what is the average atomic mass of nitrogen? 1.40 amu 1.40 lowercase a m u 14.007 amu 14.007 lowercase a m u 15.00 amu 15.00 lowercase a m u 155.00 amu
The average atomic mass of nitrogen is 14.003 amu.
Nitrogen exists in the form of two isotopes 14N and 15N.
In case an element exists in more than one type of isotope, then its average atomic mass can be calculated using the following formula
Average Atomic Mass = (Percentage abundance of isotope 1) x (Mass of isotope 1) + (Percentage abundance of isotope 2) x (Mass of isotope 2)/100
We are given that
Mass of isotope 1 = 14 amu
%age abundance of isotope 1 = 99.632 %
Mass of isotope 2 = 15 amu
%age abundance of isotope 2 = 0.368 %
Putting the above values in the equation
Average Atomic Mass = (99.632) x 14 + (0.368) x 15/100
Average atomic mass = 14.003 amu
Hence, the average atomic mass of nitrogen is 14.003 amu.
To know more about "average atomic mass", refer to the link given below:
https://brainly.com/question/13753702?referrer=searchResults
#SPJ4
Answer: It is 14.007 did the test
Explanation:
Calculate the maximum wavelength of light capable of dissociating the cl–f bond in one molecule of chlorine monofluoride if the bond energy, or bond dissociation energy, is 251 kj/mol.
According to bond energy, the maximum wavelength of light is 475 nanometers.
We need to know about bond energy to solve this problem. Bond energy is the energy needed to bond other atoms in the molecule. To determine the energy in one molecule of chlorine monofluoride, we can use this formula:
E = BE / Na
where E is the energy of photon, BE is bond energy and Na is Avogadro's number (6.02 x 10²³ atoms/mol)
Now, we can calculate the shortest wavelength by using Einstein's equation for photon energy:
E = h . c / λ
where h is Planck constant (6.6 x 10¯³⁴ J.s), c is the speed of light (3 x 10⁸ m/s) and λ is the wavelength.
From the question above, we know that
BE = 251 kJ/mol = 251 x 10³ J/mol
By substituting the given parameters, we can calculate the maximum wavelength
E = BE / Na
h . c / λ = 251 x 10³ / 6.02 x 10²³
6.6 x 10¯³⁴ . 3 x 10⁸ / λ = 251 x 10³ / 6.02 x 10²³
λ = 4.75 x 10¯⁷ m
λ = 475 nm
Find more on bond energy at: https://brainly.com/question/14593563
#SPJ4
Student wants to try to convince your parents to stop serving piece for dinner she lays an argument peas are high in fructose which is a type of sugar which test could she use to provide scientific evidence to support her argument that Peas are high in fructose
Benedict's test should be done to prove it.
Glucose is the main sugar which is mainly found in our blood. it is present in carbohydrate products. People with fructose intolerance should avoid peas because it contain a lot of fructose
Benedict's test is a test where chemicals are used to check the presence of sugar in a particular substance. The sugar that is present in the substance will react with the reducing sugar present in the substance on heating. the positive result is shown by the colour change from clear blue to brick red precipitate.
Pea contains a lot of fructose and it can be proved by doing benedict test.
Learn more about Blood sugar here https://brainly.com/question/504794
#SPJ9
Which of the following describes the length of a football field using the metric system?
Answer:
91.44 meters
Explanation:
There are no choices listed but an American pro football field is 100 yards long, which is 91.44 meters. Rounded to the nearest whole number that would be 91 meters.
A 101.96 g sample of a solid is broken down into 53.96 g of aluminum and an unknown amount of
oxygen. if a chemist wants to make 1,937 grams of that solid without any leftovers, how much aluminum
and oxygen should she react together?
1025 g of aluminum with 912.0 g of oxygen should she react together.
What do aluminum and oxygen have in common?Aluminum oxide, with the chemical formula Al₂O₃, is a chemical compound composed of aluminum and oxygen.Aluminum oxide or Alumina (Al2O3) is formed when aluminum (Al) is exposed to air. Aluminum turns silver white and greyish in appearance. Answer: It simply reacts with atmospheric oxygen to form a protective aluminum oxide sheath that prevents corrosion.Aluminum has a strong affinity for oxygen. When a new aluminum surface is exposed to air or another oxidizing agent, a thin, hard film of aluminum oxide forms quickly (or hydrated oxide in non-stagnant water). This oxidation of aluminum is precisely what makes aluminum corrosion resistant.Only trace amounts of aluminum that you may inhale, ingest, or come into contact with on your skin will enter your bloodstream. Aluminum exposure is usually not harmful, but excessive exposure can be harmful to your health.To learn more about aluminum and oxygen refer to
https://brainly.com/question/24419453
#SPJ4
what determines the period and the group on the periodic table ?
Answer:
Members of the same group in the table have the same number of electrons in the outermost shells of their atoms and form bonds of the same type.
Explanation:
what is the naming for this?
HELP PLEASE 30 POINTS.
Answer: a c 31 45 65 nitrogen
Explanation:
What is substance in your own words?
Two scientists were interested in discovering the effect of caffeine on heart rate. Identify the following:
Independent Variable :
Dependent Variable :
Constant:
Control:
Discovering the effect of caffeine on heart rate. The Independent Variable is caffeine, dependent Variable is heart beat, Control is group given no caffeine and constant is same amount of caffeine.
What is Independent variable?Independent variable is defined as varible which is changed by the experimenter.
What is Dependent Variable?Dependent variable is defined as those variable which depends on the independent variable.
What is Control group?It is defined as that group which do not receive experimental treatment.
What is Constant Variable?It is that variable which is kept unchanged for all types of groups in the experiment.
Thus, we concluded that the the Independent Variable is caffeine, dependent Variable is heart beat, Control is group given no caffeine and constant is same amount of caffeine.
learn more about Variables:
https://brainly.com/question/1479694
#SPJ9
please help!! 10 points + brainlist!!
Answer:
concentrated=strong
dilute=weak
complete the paragraph to describe binary systems
A binary star system is made of stars, two of which is brighter than the other.
Astronomers are able to detect the dimmer star because its gravity causes the bright star to wobble
Astronomers can also spot the dimmer star by observing a phenomenon called a(n) eclipsing binary. This happens when the dim star passes in front of the bright star.
When one astronomical body is obscured by another or when a body moves between it and the observer, this is known as an eclipse.Partial solar eclipses can be seen if you are in the moon's penumbra during a solar eclipse. Solar eclipses happen when the sun is partially blocked by the moon.When the sun, moon, and earth align, the earth covers the moon's view of the sun, causing lunar eclipses.To know more about eclipses visit : https://brainly.com/question/12075389
#SPJ9
help please! question in pic! 16 points!!
According to the Equilibrium Law, addition of products will shift the equilibrium towards left to the reactants and if the products are taken out the equilibrium will proceed in the forward direction to the right, to the products.
What is Equilibrium Law?Equilibrium Law refers to the state at which the rate of forward reaction is equal to the rate of backward reaction.
Equilibrium Law explains how a reaction in equilibrium will react to disturbances in the amount of products and reactants to counteract the disturbance and also how pH will impact equilibrium.
For example, if we add more product to a chemical reaction then to counteract the disturbance the equilibrium will shift towards left and more amount of reactants are formed. Similarly, if we add more amount of reactant to a chemical reaction then to compensate the change equilibrium will be shifted towards the right side and more amount of product is formed.
Learn more about Chemical Equilibrium here:
https://brainly.com/question/3920294
#SPJ1